特定场地下土工构筑物的几何可靠性分析     

吴兴征  王瑞凯  辛军霞 《岩土力学》2020,41(6):2070-2080

针对特定场地下土工构筑物的正常使用极限状态，采用近年发展的几何可靠性方法计算了多种构筑物的可靠度指标。考虑同一场地下的钻孔灌注桩、抗浮锚杆和CFG桩单桩加载变形测试曲线的离散性，各曲线回归参数呈现差异并可作为随机变量，进而探讨了各曲线回归参数间的相关性及联合分布特性。基于这些回归参数的联合发散概率密度等值线，即随机变量刚好达到极限承载能力状态，该几何可靠性算法可在随机变量的原始空间求得土工构筑物的可靠度指标。通过比对该几何可靠度指标与常规的一次可靠性算法成果，验证了该几何可靠性计算技术的可行性。计算表明，几何可靠性评价模型实施简便，易于被工程技术人员接受。  相似文献   

资源三号卫星影像纠正的方法研究     

王檄  许根  张长河 《测绘与空间地理信息》2020,(1):118-121

影像的应用前提是影像处理,大气校正可消除大气和光照等因素对地物发射的影响。在此基础上,介绍几种常用的几何纠正方法,可消除系统和非系统因素引起的影像几何变形。本文通过对资源三号卫星的基本参数信息和相对应影像数据特点的介绍,先通过大气校正,校正后的影像分别使用几何纠正的几种方法,并通过各种方法的计算量、实用性以及相应的精度,对比分析各种方法在处理这种数据时的优越性。  相似文献   

基于几何形态测量学的四种滨螺形态差异与系统发生关系研究   总被引：1，自引：0，他引：1  

陈楠桦  梁仁杰  白义  王海瑞 《海洋与湖沼》2018,49(6):1365-1374

运用几何形态测量学方法研究浙江省大陈岛海域常见的4种滨螺间的形态关系。对4种滨螺的壳口、螺体分别进行数字化标点,经叠印分析、主成分分析(PCA)和薄片样条法分析,获得4种滨螺在壳口和螺体上的差异,并进一步分析其形态特征与潮间带环境适应性关系。PCA结果表明四种滨螺壳口间差异在主成分轴上无法有效分开,而螺体间差异在主成分轴上能有效分开,说明壳口特征在不同滨螺间不具有规律性差异。螺体的PCA中PC1轴可以将短滨螺与其他3种滨螺区分,薄片样条法分析显示差异的部位主要在体螺层的宽度和螺体的高度间,PC2轴可以将粒结节滨螺与其他3种滨螺分开,薄片样条法分析显示差异部位主要是体螺层之上第一层以及体螺层之间。基于螺体特征的4种滨螺亲缘关系分析表明粗糙滨螺与塔结节滨螺亲缘关系最近,其次为短滨螺,粒结节滨螺最不相近。运用特征追踪法对螺层和螺肋特征追踪,结果表明螺层6层,螺肋密生是滨螺的祖先特征,后来演化出7层和8层的螺层特征以及颗粒状突起的螺肋特征。  相似文献   

设计反应谱标定方法的研究现状与讨论          下载免费PDF全文

蒋晓涵  薄景山    王竞  韩昕  郭晓云  赵培培  谭启迪 《世界地震工程》2018,34(4):038-48

设计反应谱及其标定方法的研究是工程抗震研究领域的基本问题之一。在现有研究成果的基础上，归纳和总结了设计反应谱及其标定方法的研究历史和现状；评述了研究进程中的若干节点问题；介绍了设计反应谱的标定原理和当前几种有代表性的设计反应谱的标定方法；分析了设计反应谱标定参数的影响因素。在此基础上，对设计反应谱及其标定方法研究中的强震资料积累问题、谱形状问题、标定参数的确定问题以及标定方法等问题进行了讨论并提出了改进和进一步研究的建议。  相似文献   

基于一维综合孔径微波辐射计的海面温度反演研究   总被引：1，自引：0，他引：1  

艾未华  冯梦延  陈冠宇  陆文 《海洋学报(英文版)》2020,42(5):115-122

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.  相似文献   

KK型管节点应力集中系数几何敏感性分析     

林海花  孙承猛  石强 《海洋工程》2020,38(6):142-150

KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

Calibration method affects the measured δ2H and δ18O in soil water by direct H2Oliquid–H2Ovapour equilibration with laser spectroscopy     

Hongxiu Wang  Bingcheng Si  Dyan Pratt  Han Li  Xiaojun Ma 《水文研究》2020,34(2):506-516

The direct H₂O_liquid–H₂O_vapour equilibration method utilizing laser spectroscopy (DVE-LS) is a way to measure soil pore water stable isotopes. Various equilibration times and calibration methods have been used in DVE-LS. Yet little is known about their effects on the accuracy of the obtained isotope values. The objective of this study was to evaluate how equilibration time and calibration methods affect the accuracy of DVE-LS. We did both spiking and field soil experiments. For the spiking experiment, we applied DVE-LS to four soils of different textures, each of which was subjected to five water contents and six equilibration times. For the field soil experiment, we applied three calibration methods for DVE-LS to two field soil profiles, and the results were compared with cryogenic vacuum distillation (CVD)-LS. Results showed that DVE-LS demonstrated higher δ²H and δ¹⁸O as equilibration time increased, but 12 to 24 hr could be used as optimal equilibration time. For field soil samples, DVE-LS with liquid waters as standards led to significantly higher δ²H and δ¹⁸O than CVD-LS, with root mean square error (RMSE) of 8.06‰ for δ²H and 0.98‰ for δ¹⁸O. Calibration with soil texture reduced RMSE to 3.53‰ and 0.72‰ for δ²H and δ¹⁸O, respectively. Further, calibration with both soil texture and water content decreased RMSE to 3.10‰ for δ²H and 0.73‰ for δ¹⁸O. Our findings conclude that the calibration method applied may affect the measured soil water isotope values from DVE-LS.  相似文献   

Estimating groundwater recharge for a freshwater lens in an arid region: Formative and stability assessment     

Mosaed S. Alrashidi  Ryan T. Bailey 《水文研究》2020,34(4):1063-1080

The formation of subsurface freshwater lenses on top of brackish groundwater is a fascinating hydrologic phenomenon that creates groundwater supplies of great potential value in arid regions. Information on the recharge quantity and mechanism of these lenses is both scarce and uncertain. This study examines the formation and macroscale stability of the Rawdatain freshwater lens in Kuwait, for which significant pre-development data are available. The Rawdatain is a large (150 million m³) subsurface freshwater lens overlying brackish groundwater compared to the other freshwater lenses in the Arabian Peninsula. In this study, a three-dimensional (3D) density-dependent groundwater flow model is tested against the following data targets to estimate long-term diffuse and focused groundwater recharge: (i) groundwater head, (ii) total dissolved solids (TDS) groundwater concentration, (iii) volume and vertical thickness of stored groundwater of three different water quality TDS ranges (0–700, 700–1000 and 1000–2000 mg/L) and (iv) geometrical shape features of the lens along cross-sections. To better represent the spatial variation in TDS, six different recharge zones were assigned to allocate diffuse and focused recharge conditions. Twelve recharge rate scenarios, encompassing a wide range of feasible long-term average annual recharge values (200,000–5,000,000 m³/year), were tested against the multiple targets and compared with the groundwater age of the Rawdatain lens. Based on comparison with data targets, the long-term average annual recharge is estimated to be 500,000 m³/year. Scenarios of reduced recharge, which may occur due to changes in land-use or climate, demonstrate the extremely slow response of the lens, which is in agreement with the slow development and formation of the lens (>2,000 years). Within a 100-year time frame, a 50% reduction in annual recharge reduces the lens volumes by 21, 17 and 9% for the three water quality categories, respectively. This study demonstrates the stability of freshwater lenses in arid regions and also provides methodology for similar focused rainfall recharge freshwater lenses.  相似文献   

多源地理空间矢量数据关联分析   总被引：1，自引：1，他引：0  

郭黎  姜晶莉  李豪  王云阁 《测绘通报》2020,(6):71

针对多源地理空间矢量数据多来源、难以集成综合利用这一现状，本文提出了多源地理空间矢量数据关联方法，并以此为基础构建了多源地理空间矢量数据关联的可视与计算查询系统。首先，对多源地理空间矢量数据关联的概念及分类进行了定义。然后，以此为基础，提出了关联关系构建技术：自适应四叉树编码技术、扫描线技术、几何匹配及语义匹配技术。最后，为实现关联关系的直观展示，设计了原型系统。关联技术的提出可建立起多源地理空间矢量数据之间的关联关系，原型系统的构建也为用户综合利用多源地理空间矢量数据提供了平台，提高了数据的利用率及数据查询的效能。  相似文献