极端条件下心墙泥浆料的渗透反滤试验研究     

左永振  赵娜 《岩土力学》2020,41(2):520-526

高土石心墙坝的渗透稳定性在很大程度上依赖于反滤层对心墙料的反滤保护作用。心墙在大坝蓄水和长期运行的条件下，要经历复杂的填筑加载、浸水饱和与水荷载的作用，在差异沉降、复杂结构应力作用、水力劈裂和渗透水流作用下，心墙一旦出现裂缝，其渗透稳定性及反滤层的保护作用就将面临严峻的考验。针对这一问题，设计了专门非常规的抛填土料反滤试验和泥浆渗透反滤试验，模拟心墙裂缝条件下其颗粒被冲刷起动后，被反滤料阻挡和淤积过程。试验结果表明，心墙料和反滤料满足反滤准则条件下，心墙颗粒被拦截和淤积在反滤层上游表面，反滤料能有效防止心墙颗粒的流失，反滤层在极端条件下对心墙料仍能起到有效的反滤保护作用。  相似文献   

国内外绳索取心钻具研发应用概况及特深孔钻进问题分析   总被引：1，自引：1，他引：0       下载免费PDF全文

李鑫淼  李宽  孙建华  梁健  尹浩 《探矿工程》2020,47(4):15-23，39

随着钻孔深度的不断增加，对绳索取心钻具的使用性能提出了更高要求。在分析了国内外绳索取心钻具研发现状、结构设计特点及特深孔应用情况的基础上，整理了特深孔钻进绳索取心钻具使用存在的技术问题，定位机构打捞可靠性、到位报信提示可靠性、堵心报信机构工作稳定性、单动机构使用寿命均有待提高，并相应地分析了原因，为5000 m特深孔绳索取心钻具优化设计打好基础。  相似文献   

水源钻机在超深土层绳索取心钻进中的应用          下载免费PDF全文

杨联锋  段云星 《探矿工程》2020,47(11):44-50

山西省清徐县区域地质调查项目设计800、2000、3000 m科学钻探孔，以调查填补新生界底板埋深控制空白区，各孔钻入基岩30 m完钻。要求全孔取心，岩心采取率≮85%，岩心直径≮60 mm，采用塑料保护管采取原状岩样。针对超深软土层、各组地层特性及厚度未知、钻遇基岩完钻深度未知、大直径高保真全孔取心、项目价格远低于目前市场成本等难题，经过“水源钻机+大提钻取心+长裸眼孔段”实施800 m孔、“岩心钻机+绳索取心+套管固井”实施640 m参数对比孔，创新性使用“水源钻机+绳索取心+长裸眼孔段”工艺完成了2000 m孔的施工。该工艺岩心采取率达到93%，孔径和孔斜符合地质要求，为3000 m孔顺利施工打下了坚实的基础，为同类型项目提供了经验和借鉴。  相似文献   

基于HYCOM再分析数据研究琉球海流的形成与起源     

汪敏  刘昭君  朱小华  闫晓梅  张钟哲  赵瑞祥 《海洋学报(英文版)》2019,38(11):1-10

The origin of the Ryukyu Current(RC) and the formation of its subsurface velocity core were investigated using a 23-year(1993–2015) global Hybrid Coordinate Ocean Model(HYCOM) dataset. The volume transport of the RC comes from the Kuroshio eastward branch(KEB) east of Taiwan and part of the North Pacific Subtropical Gyre(pNPSG). From the surface to 2 000 m depth, the KEB(p-NPSG) transport contributes 41.5%(58.5%) to the mean total RC transport. The KEB originally forms the subsurface velocity core of the RC east of Taiwan due to blockage of the subsurface Kuroshio by the Ilan Ridge(sill depth: 700 m). Above 700 m, the Kuroshio can enter the East China Sea(ECS) over the Ilan Ridge, meanwhile, the blocked Kuroshio below 700 m turns to the right and flows along the Ryukyu Islands. With the RC flowing northeastward, the p-NPSG contribution strengthens the subsurface maximum structure of the RC owing to the blockage of the Ryukyu Ridge. In the surface layer, the pNPSG cannot form a stable northeastward current due to frequent disturbance by mesoscale eddies and water exchange through the gaps(with net volume transport into ECS) between the Ryukyu Islands.  相似文献   

能力培养为导向的实践课程改革与设计     

刘亚文  王玥  段延松 《测绘通报》2020,(4):152-156

大学实践课程是培养学生创新、创业实践能力的重要环节，本文在新工科实验课程建设中，提出了以能力培养为导向的实践课程设计思路，旨在培养适应当今新技术、新产业、新模式快速变革时代的创新性工程科技人才。本文将传统的验证性实践课程调整为“目标设定、方案规划及实施”的设计型实验课程，强调学生在实践中的主体地位，遵循实践能力培养的规律，引导学生在实践中重参与、重思考、重实施、重过程。同时，将行业的最新发展、最新变革反映在实践教学课程中，增加了新型传感器及混合云人机协作数据处理平台，确保学生获取的知识和技术与快速发展的行业水平相接轨。本文以摄影测量实习课程改革为例，实践证明，课程的实施对于培养学生综合分析设计、创造性解决专业问题的能力取得了较好的效果。  相似文献   

The 1‐million‐year‐old quartz assemblage from Pont‐de‐Lavaud (Centre,France) in the European context          下载免费PDF全文

Jackie Despriée  Marie‐Hélène Moncel  Marta Arzarello  Gilles Courcimault  Pierre Voinchet  Jean‐Jacques Bahain  Christophe Falguères 《第四纪科学杂志》2018,33(6):639-661

  相似文献   

极地冰钻关键技术研究进展          下载免费PDF全文

张楠  王亮  Pavel Talalay  范晓鹏  王如生  杨阳  洪嘉琳  宫达  孙友宏  李院生  李冰 《探矿工程》2020,47(2):1-16

极地冰钻技术是获取冰芯，研究冰盖-冰架-海洋相互作用，以及获取极地冰下基岩与冰下水环境样品，开展冰下环境探测的重要手段。目前极地冰钻技术的难点与前沿主要包括深冰芯钻探、冰架热水钻、冰下基岩钻和冰下水环境采样与观测技术。本文针对以上4个极地冰钻关键技术，对国内外相关技术的研究进展与项目开展情况进行了总结与梳理。综合来看，虽然我国开展极地钻探技术研究起步较晚，但随着我国极地战略不断推进，我国的极地冰钻关键技术与装备的研究正持续向着赶超极地钻探强国方向迈进，这必将为我国的极地科学研究提供强有力的技术支撑。  相似文献   

Intercomparison of measurements of bulk snow density and water equivalent of snow cover with snow core samplers: Instrumental bias and variability induced by observers     

J. Ignacio López-Moreno  Leena Leppänen  Bartłomiej Luks  Ladislav Holko  Ghislain Picard  Alba Sanmiguel-Vallelado  Esteban Alonso-González  David C. Finger  Ali N. Arslan  Katalin Gillemot  Aynur Sensoy  Arda Sorman  M. Cansaran Ertaş  Steven R. Fassnacht  Charles Fierz  Christoph Marty 《水文研究》2020,34(14):3120-3133

Manually collected snow data are often considered as ground truth for many applications such as climatological or hydrological studies. However, there are many sources of uncertainty that are not quantified in detail. For the determination of water equivalent of snow cover (SWE), different snow core samplers and scales are used, but they are all based on the same measurement principle. We conducted two field campaigns with 9 samplers commonly used in observational measurements and research in Europe and northern America to better quantify uncertainties when measuring depth, density and SWE with core samplers. During the first campaign, as a first approach to distinguish snow variability measured at the plot and at the point scale, repeated measurements were taken along two 20 m long snow pits. The results revealed a much higher variability of SWE at the plot scale (resulting from both natural variability and instrumental bias) compared to repeated measurements at the same spot (resulting mostly from error induced by observers or very small scale variability of snow depth). The exceptionally homogeneous snowpack found in the second campaign permitted to almost neglect the natural variability of the snowpack properties and focus on the separation between instrumental bias and error induced by observers. Reported uncertainties refer to a shallow, homogeneous tundra-taiga snowpack less than 1 m deep (loose, mostly recrystallised snow and no wind impact). Under such measurement conditions, the uncertainty in bulk snow density estimation is about 5% for an individual instrument and is close to 10% among different instruments. Results confirmed that instrumental bias exceeded both the natural variability and the error induced by observers, even in the case when observers were not familiar with a given snow core sampler.  相似文献   

川藏铁路3000 m水平定向钻井技术方案          下载免费PDF全文

张恒春  刘广  吴纪修  王庆晓  于好善  刘志强  许洁 《探矿工程》2020,47(11):1-6

川藏铁路设计多条超长深埋隧道，且多处于高海拔、高陡斜坡及雪线以上的无人山区，地形险峻，起伏大，交通条件差。沿隧道轴线的水平定向钻井为隧道勘察提供了一种有效的勘察手段。结合工程及地层特点，从钻井设备、工艺等方面，为超长隧道勘察提供了一种3000 m级水平定向钻井技术方案。方案明确了井身结构、全面钻进和长钻程取心钻进工艺、钻井液措施及部分复杂情况应对措施。以较少的钻探工作量，为隧道勘察提供更加详细的实物地质资料，真实反映隧道内的地质情况。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献