激光跟踪仪在核电站主管道安装中的应用     

郭建兵 《北京测绘》2020,(1):123-125

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。  相似文献   

水平定向钻进非开挖铺管技术市场分析     

袁明昕 《探矿工程》2008,35(10):49-51

重点分析了近几年我国水平定向钻进铺管钻机和施工市场的发展趋势,结合国外的水平定向钻进市场发展分析,总结了我国水平定向钻进技术与市场的发展态势。  相似文献   

深水导管架下水扶正过程定量风险分析     

余建星  谭振东  田佳 《海洋工程》2007,25(1):9-14

运用QRA技术(定量风险评估)对导管架下水过程进行深入分析,提出风险概率评价模型和事故损失综合评估方法。首先辨识潜在的风险事件及相关风险因素,然后量化风险事件的模糊概率和损失程度,最后依据风险量化结果和ALARP(aslow as reasonably practically)原则对需要控制的风险事件给出控制措施。通过定量风险分析,达到及时查找并消除各方面事故隐患的目的。  相似文献   

Wave Loads and Protective Techniques of An On-Shore Wave Power Device     

You Yage YuZhi Associated Professor  Guangzhou Institute of Energy Conversion  Chinese Academy of Sciences  Guangzhou . Professor  Guangzhou Institute of Energy Conversion  Chinese Academy of Sciences  Guangzhou 《中国海洋工程》1995,(4)

In this paper, the extreme wave loads on an on-shore wave power device are investigated. First, boundary element method is applied to solve the three dimensional potential problem based on the small amplitude wave assumption. Then the motion of the Oscillating Water Column (OWC) inside the device and its laods on the device are calculated in time domain. Several protective techniques often applied are simulated by changing the constraint of the upper end of the chamber of the device. Numerical results are used to judge the effectiveness of these techniques. The investigation shows that damping can not effectively restrain the motion of OWC when the period of incident wave is long, which may cause dangerous loads on the structure. The shut chamber can effectively restrain the motion of OWC, but alternatively cause high pressure in the chamber. A Contracting opening with a Taper (CT) can exhaust a great amount of kinetic energy of OWC, and significantly decrease the loads. It is a promising protective tec  相似文献   

清淤输泥的新方法新设备     

陶松垒  王康林  陶钧炳  谢远富  周良荣 《海洋学研究》2006,24(Z1):113-120

为解决中低滩涂沉积的深厚软粘土层的输送难题,提出了一种清淤输泥的新方法,研制了能远距离输送高浓度、大粘度、低含水量的淤泥和软粘土的土方施工新设备:包括进料口、推送器、表面膜发生器、脉冲切割器、定位系统、智能控制系统、输料管道、管道浮子等。该设备具有能耗低,工效高,效益好;结构简单,故障少,运行维护方便;定位准确性高;自动化程度高等特点。可广泛应用于水利、环保、建筑工程中的淤泥和软粘土输送。  相似文献   

陀螺经纬仪的读数方法比较研究   总被引：2，自引：0，他引：2  

万朋  李宗春  李广云  张冠宇  牟爱国 《海洋测绘》2005,25(5):75-78

介绍了陀螺定向测量中三种不同的数据采集方法，分析了各种方法的优缺点。作者认为传感器采集数据自动化程度高，精度高，特别是运用位置敏感探测器（PSD）采样数据量大，具有一定的抗干扰能力，但在运用传感器采样时必须注意克服非线性误差。  相似文献   

可调滞回模型的磁流变阻尼器及其试验   总被引：5，自引：0，他引：5  

杨飓  关新春  欧进萍 《地震工程与工程振动》2002,22(2):115-120

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。  相似文献   

VS型垂直摆倾斜仪的安装调试与标定要点   总被引：1，自引：0，他引：1  

秦家林  佟国刚 《东北地震研究》2002,18(3):20-21

本文总结了铁岭地震台安装，调试与标定VS型垂直倾仪的经验。  相似文献   

Interpretation of charging on fracture or frictional slip surface of rocks     

Akihiro Takeuchi  Hiroyuki Nagahama 《Physics of the Earth and Planetary Interiors》2002,130(3-4):285-291

Fracturing and frictional sliding of quartz and granite under dry condition generates fractoluminescence, charged particle emission and electromagnetic radiation. Various kinds of experiments indicate that surface charge density on fracture or frictional slip surface of quartz and granite is 10⁻⁴ to 10⁻² C/m² which is larger than bound charges induced by the disappearance of piezoelectricity due to the release of stress. Hole and electron trapping centers, which is found in semiconductor devices with the Si–SiO₂ system, are causes of surface charging on fracture or frictional slip surface of quartz crystal. The quantity of the surface charge is enough to cause corona discharge that can generate earthquake lights. The mechanism considering the hole and electron trapping centers has a probability to explain why non-piezoelectric minerals or rocks generate electromagnetic phenomena. It can be one of origins of seismo-electromagnetic phenomena (SEP).  相似文献   

Optimal placement of dampers and actuators based on stochastic approach     

Franklin Y. Cheng  Hongping Jiang  Xiaozhe Zhang Ph.D. Candidate 《地震工程与工程振动(英文版)》2002,1(2):237-249

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.  相似文献