Regional modelling of rainfall-induced runoff using hydrological model by incorporating plant cover effects: case study in Kelantan,Malaysia     

Shattri Mansor  Nader Saadatkhah  Zailani Khuzaimah  Arnis Asmat  Nor Aizam Adnan  Siti Noradzah Adam 《Natural Hazards》2018,93(2):739-764

The objective of this paper is to develop a spatial temporal runoff modelling of local rainfall patterns effect on the plant cover hilly lands in Kelantan River Basin. Rainfall interception loss based on leaf area index, loss/infiltration on the ground surface, and runoff calculation were considered as the main plant cover effects on the runoff volume. In this regard, a hydrological and geotechnical grid-based regional model (integrated model) was performed using Microsoft Excel^® and GIS framework system for deterministic modelling of rainfall-induced runoff by incorporating plant cover effects. The infiltration process of the current model was integrated with the precipitation distribution method and rainfall interception approach while the runoff analysis of integrated model was employed based on loss/infiltration water on the ground surface with consideration of water interception loss by canopy and the remaining surface water. In the following, the spatial temporal analysis of rainfall-induced runoff was performed using 10 days of hourly rainfall events at the end of December 2014 in Kelantan River Basin. The corresponding changes in pressure head and consequent rate of infiltration were calculated during rainfall events. Subsequently, flood volume is computed using local rainfall patterns, along with water interception loss and the remaining surface water in the study area. The results showed the land cover changes caused significant differences in hydrological response to surface water. The increase in runoff volume of the Kelantan River Basin is as a function of deforestation and urbanization, especially converting the forest area to agricultural land (i.e. rubber and mixed agriculture).  相似文献   

Spring recharge and groundwater flow patterns in flysch aquifer in the Po(l)onina Wetli(n)ska Massif in the Carpathian Mountains     

Karolina MOSTOWIK  Damian KRZYCZMAN  Eliza PACZKOWSKA  Bartomiej RZONCA  Janusz SIWEK  Patryk WACAWCZYK 《山地科学学报》2021,(4):819-833

Flysch-type aquifers in the Eastern Carpathians usually feed periodic and low-discharge springs.However,in some areas,such as in the upper part of the Po(l)onin...  相似文献   

南海4种珊瑚附生可培养真菌多样性分析          下载免费PDF全文

郭双双  徐炜  Siti Aisyah Alias  何高阳  骆祝华 《应用海洋学学报》2018,37(1):35-44

本研究利用从南海采集的4种珊瑚分离附生真菌,并通过菌株的分类鉴定及系统发育分析获得珊瑚附生可培养真菌的多样性信息.选用酵母麦芽糖琼脂培养基(YM)、马铃薯葡萄糖琼脂培养基(PDA)、马丁氏培养基(Martin)、察氏琼脂培养基(CDA)和孟加拉红培养基(RBM)等5种培养基,采用平板涂布法培养分离附生真菌,基于ITS-rRNA基因序列对真菌菌株进行鉴定和系统发育分析.从4种珊瑚上共分离获得10个属的120株真菌,分别是:青霉属(Penicillum)56株、曲霉属(Aspergillus)25株、枝顶孢属(Acremonium)2株、枝孢属(Cladosporium)5株、毕赤酵母属(Meyerozyma)14株、隔孢伏革属(Peniophora)2株、拟茎点霉属(Phomopsis)1株、裂褶菌属(Schizophyllum)1株、梗孢酵母属(Sterigmatomyces)13株、篮状菌属(Talaromyces)1株.通过对不同珊瑚品种分离获得的附生真菌的比较,发现小叶鹿角珊瑚(Acropora microphthalma)和花鹿角珊瑚(Acropora floride)上分离到的菌株多样性最高,包含6属10种.进一步的分析发现不同珊瑚样品上真菌种类分布有较大差异,隔孢伏革属和裂褶菌属真菌均分离自小叶鹿角珊瑚,梗孢酵母属和篮状菌属均分离自角孔珊瑚(Goniopora sp.),扁脑珊瑚(Platygyra sp.)上则分离到拟茎点霉属.同时还发现不同培养基分离真菌的能力不同,YM培养基分离的菌株最多,CDA培养基分离真菌的多样性最多.以上的研究结果表明,南海珊瑚上存在大量且丰富的真菌资源,可以为后续生物活性物质的开发利用提供良好的菌种资源.  相似文献   

Conjunctive use of surface water and groundwater via the bank infiltration method     

Mohd Khairul Nizar Shamsuddin  Wan Nor Azmin Sulaiman  Saim Suratman  Mohamad Pauzi Zakaria  Kamarudin Samuding 《Arabian Journal of Geosciences》2014,7(9):3731-3753

The bank infiltration (BI) technique may be a viable option if the local climate, hydrological, and geological conditions are conducive. This study was specifically conducted to explore the possibility of using BI to source the polluted surface water in conjunction with groundwater. Three major factors were considered for evaluation: (1) investigation on the contribution of surface water through BI, (2) input of local groundwater, and (3) water quality characteristics of water supply. Initially, the geophysical method was employed to define the subsurface geology and hydrogeology, and isotope techniques were performed to identify the source of groundwater recharge and interaction between surface water and groundwater. The physicochemical and microbiological parameters of the local surface water bodies and groundwater were analyzed before and during water abstraction. Extracted water revealed a 5 %–98 % decrease in turbidity, as well as HCO₃ ⁺, SO₄ ^?, NO₃ ^?, Al, As, and Ca concentration reduction compared with those of Langat river water. However, water samples from test wells during pumping show high concentrations of Fe²⁺ and Mn²⁺. In addition, amounts of Escherichia coli, total coliform, and Giardia were significantly reduced (99.9 %). Pumping test results indicate that the two wells (DW1 and DW2) were able to sustain yields.  相似文献   

Dynamics of co-ignimbrite plumes generated from pyroclastic flows of Mount St. Helens (7 August 1980)     

Eliza S. Calder  R. Stephen J. Sparks  Andrew W. Woods 《Bulletin of Volcanology》1997,58(6):432-440

 Four co-ignimbrite plumes were generated along the flow path of the pyroclastic flow of 7 August 1980 at Mount St. Helens. Three of the plumes were generated in discrete pulses which can be linked to changes in slope along the channel. One plume was generated at the mouth of the channel where the flow decelerated markedly as it moved onto the lower slopes of the pumice plain. Plume generation here may be triggered by enhanced mixing due to a hydraulic jump associated with an abrupt slope change. Measurements of plume ascent velocity and width show that the co-ignimbrite plumes increased in velocity with height. The plumes have initial velocities of 1–2 m/s. Two of the plumes reached a velocity maximum (4.6 and 8.8 m/s, respectively, at heights of 270 and 315 m above the flow) and thereafter decelerated. The other plumes reached velocities of 6.2 and 13 m/s. The four plumes become systematically less energetic downstream as measured by their ascent rates, which can be interpreted as a consequence of decreasing interaction of the pyroclastic flow front with the atmosphere. Theoretical models of both co-ignimbrite plumes and discrete co-ignimbrite clouds assume that there is no initial momentum, and both are able to predict the observed acceleration stage. The rising plumes mix with and heat air and sediment out particles causing their buoyancy to increase. Theoretical models agree well with observations and suggest that the initial motion of the ascending material is best described as a discrete thermal cloud which expands as it entrains air, whereas the subsequent motion of the head may become influenced by material supplied from the following plume. The models agree well with observations for an initial temperature of the ash and air mixture in the range of 500–600 K, which is in turn consistent with the measured initial ash temperature of around 920 K. Ash masses of 3.4×10⁵ to 1.8×10⁶ kg are estimated. Received: 11 January 1996 / Accepted: 7 October 1996  相似文献   

Use of Sonication for Enhanced Sampling of Attached Microbes from Groundwater Systems     

Murray Close  Phil Abraham  Judith Webber  Eliza Cowey  Bronwyn Humphries  Graham Fenwick  Simon Howard  Kimberly Huynh  Travis Grace  Pierre-Yves Dupont  Louise Weaver 《Ground water》2020,58(6):901-912

The vast majority of microorganisms in aquifers live as biofilms on sediment surfaces, which presents significant challenges for sampling as only the suspended microbes will be sampled through normal pumping. The use of a down-well low frequency sonicator has been suggested as a method of detaching microbes from the biofilm and allowing rapid sampling of this community. We developed a portable, easy to use, low-frequency electric sonicator and evaluated its performance for a range of well depths (tested up to 42 m below ground level) and casing types. Three sonicators were characterized in laboratory experiments using a 1 m long tank filled with pea gravel. These included a commercially available pneumatic sonicator, a rotating flexible shaft sonicator, and the prototype electric sonicator. The electric sonicator detached between 56 and 74% of microbes grown on gravel-containing biobags at distances ranging between 2 and 50 cm from the sonicator. The field testing comprises of a total of 55 sampling events from 48 wells located in 4 regions throughout New Zealand. Pre- and post-sonication samples showed an average 33 times increase in bacterial counts. Microbial sequence data showed that the same classes are present in pre- and post-sonicated samples and only slight differences were seen in the proportions present. The sampling process was rapid and the significant increases in bacterial counts mean that microbial samples can be quickly obtained from wells, which permits more detailed analysis than previously possible.  相似文献   

An automated 3D modeling of topological indoor navigation network     

Ali Jamali  Alias Abdul Rahman  Pawel Boguslawski  Pankaj Kumar  Christopher M. Gold 《GeoJournal》2017,82(1):157-170

Indoor navigation is important for various applications such as disaster management, building modeling, safety analysis etc. In the last decade, indoor environment has been a focus of wide research that includes development of indoor data acquisition techniques, 3D data modeling and indoor navigation. In this research, an automated method for 3D modeling of indoor navigation network has been presented. 3D indoor navigation modeling requires a valid 3D model that can be represented as a cell complex: a model without any gap or intersection such that two cells (e.g. room, corridor) perfectly touch each other. This research investigates an automated method for 3D modeling of indoor navigation network using a geometrical model of indoor building environment. In order to reduce time and cost of surveying process, Trimble LaserAce 1000 laser rangefinder was used to acquire indoor building data which led to the acquisition of an inaccurate geometry of building. The connection between surveying benchmarks was established using Delaunay triangulation. Dijkstra algorithm was used to find shortest path in between building floors. The modeling results were evaluated against an accurate geometry of indoor building environment which was acquired using highly-accurate Trimble M3 total station. This research intends to investigate and propose a novel method of topological navigation network modeling with a less accurate geometrical model to overcome the need of required an accurate geometrical model. To control the uncertainty of the calibration and of the reconstruction of the building from the measurements, interval analysis and homotopy continuation will be investigated in the near future.  相似文献   

The impact of health financing and CO<Subscript>2</Subscript> emission on health outcomes in Sub-Saharan Africa: A cross-country analysis     

Abdalla Sirag  Norashidah Mohamed Nor  Siong Hook Law  Nik Mustapha Raja Abdullah  Miloud Lacheheb 《GeoJournal》2017,82(6):1247-1261

The current paper examines the relationship between health financing (public and out-of-pocket health financing), CO₂ emission and health outcomes in 35 Sub-Saharan African countries for the period of 1995–2012. The panel unit root and cointegration tests are conducted as pre-tests, followed by the estimation of the parameters using the FM-OLS and DOLS techniques. The findings of the study show the importance of public health financing as one of the major factors that lead to better health outcomes, whereas the out-of-pocket expenditure is found to be harmful to population health since it leads to increase under-5 mortality rate. Although the results show a negative relationship between CO₂ and health outcomes, still these results remain inclusive. In addition, the findings reveal the importance of socioeconomic factors such as income and education as key determinants of health outcomes.  相似文献   

SWAT-based hydrological modelling of tropical land-use scenarios     

Hadi Memarian  Karim C. Abbaspour  Jamal B. Talib  Christopher Teh Boon Sung  Alias Mohd Sood 《水文科学杂志》2013,58(10):1808-1829

Abstract

The Hulu Langat basin, a strategic watershed in Malaysia, has in recent decades been exposed to extensive changes in land-use and consequently hydrological conditions. In this work, the impact of Land Use and Cover Change (LUCC) on hydrological conditions (water discharge and sediment load) of the basin were investigated using the Soil and Water Assessment Tool (SWAT). Four land-use scenarios were defined for land-use change impact analysis, i.e. past, present (baseline), future and water conservation planning. The land-use maps, dated 1984, 1990, 1997 and 2002, were defined as the past scenarios for LUCC impact analysis. The present scenario was defined based on the 2006 land-use map. The 2020 land-use map was simulated using a cellular automata-Markov model and defined as the future scenario. Water conservation scenarios were produced based on guidelines published by Malaysia’s Department of Town and Country Planning and Department of Environment. Model calibration and uncertainty analysis was performed using the Sequential Uncertainty Fitting (SUFI-2) algorithm. The model robustness for water discharge simulation for the period 1997–2008 was good. However, due to uncertainties, mainly resulting from intense urban development in the basin, its robustness for sediment load simulation was only acceptable for the calibration period 1997–2004. The optimized model was run using different land-use maps over the periods 1997–2008 and 1997–2004 for water discharge and sediment load estimation, respectively. In comparison to the baseline scenario, SWAT simulation using the past and conservative scenarios showed significant reduction in monthly direct runoff and monthly sediment load, while SWAT simulation based on the future scenario showed significant increase in monthly direct runoff, monthly sediment load and groundwater recharge.