Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays     

Gert Finger  Reinhold J. Dorn  Alan W. Hoffman  Hamid Mehrgan  Manfred Meyer  Alan F. M. Moorwood  Joerg Stegmeier 《Experimental Astronomy》2002,14(2):117-127

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Problems in data compilation     

Heinrich Eichhorn  Carl S. Cole 《Celestial Mechanics and Dynamical Astronomy》1985,37(3):263-275

Concepts involved in the estimation of target quantities and other adjustment parameters are critically discussd. We point out that one can find more accurate precepts for the reduction of data by utilizing all available constraints on all available data in the derivation of the reduction precepts. We introduce a measure for theefficiency of a set of adjustment parameters such that adjustments carried out using different precepts can be objectively compared. Finally, having applied our suggestions to a specific problem, we show that we have obtained estimates of a set of target quantities (in our case, star positions and proper motions) which have smaller formal errors than estimates of the same target quantities derived from the same input material but following traditional procedures.  相似文献   

Microdistribution of primordial Ne and Ar in fine‐grained rims,matrices, and dark inclusions of unequilibrated chondrites—Clues on nebular processes     

Nadia VOGEL  Rainer WIELER  Addi BISCHOFF  Heinrich BAUR 《Meteoritics & planetary science》2003,38(9):1399-1418

Abstract— The low temperature fine‐grained material in unequilibrated chondrites, which occurs as matrix, rims, and dark inclusions, carries information about the solar nebula and the earliest stages of planetesimal accretion. The microdistribution of primordial noble gases among these components helps to reveal their accretionary and alteration histories. We measured the Ne and Ar isotopic ratios and concentrations of small samples of matrix, rims, and dark inclusions from the unequilibrated carbonaceous chondrites Allende (CV3), Leoville (CV3), and Renazzo (CR2) and from the ordinary chondrites Semarkona (LL3.0), Bishunpur (LL3.1), and Krymka (LL3.1) to decipher their genetic relationships. The primordial noble gas concentrations of Semarkona, and—with certain restrictions—also of Leoville, Bishunpur, and Allende decrease from rims to matrices. This indicates a progressive accretion of nebular dust from regions with decreasing noble gas contents and cannot be explained by a formation of the rims on parent bodies. The decrease is probably due to dilution of the noble‐gas‐carrying phases with noble‐gas‐poor material in the nebula. Krymka and Renazzo both show an increase of primordial noble gas concentrations from rims to matrices. In the case of Krymka, this indicates the admixture of noble gas‐rich dust to the nebular region from which first rims and then matrix accreted. This also explains the increase of the primordial elemental ratio 36Ar/ 20Ne from rims to matrix. Larger clasts of the noble‐gas‐rich dust form macroscopic dark inclusions in this meteorite, which seem to represent unusually pristine material. The interpretation of the Renazzo data is ambiguous. Rims could have formed by aqueous alteration of matrix or—as in the case of Krymka—by progressive admixture of noble gas‐rich dust to the reservoir from which the Renazzo constituents accreted. The Leoville and Krymka dark inclusions, as well as one dark inclusion of Allende, show noble gas signatures different from those of the respective host meteorites. The Allende dark inclusion probably accreted from the same region as Allende rims and matrix but suffered a higher degree of alteration. The Leoville and Krymka dark inclusions must have accreted from regions different from those of their respective rims and matrices and were later incorporated into their host meteorites. The noble gas data imply a heterogeneous reservoir with respect to its primordial noble gas content in the accretion region of the studied meteorites. Further studies will have to decide whether these differences are primary or evolved from an originally uniform reservoir.  相似文献   

Hydrobiologische Untersuchungen an den hochalpinen Seen des San Bernardinopasses     

Heinrich Wolff 《Aquatic Sciences - Research Across Boundaries》1948,10(4):101-244

Ohne Zusammenfassung Ausgeführt und herausgegeben mit Unterstützung der ?Georges und Antoine Claraz-Schenkung instituta et curata Johannis Schinz Professoris auspiciis?  相似文献   

Fluid and source magma evolution of the Questa porphyry Mo deposit,New Mexico,USA   总被引：14，自引：1，他引：13  

Leonhard M. Klemm  Thomas Pettke  Christoph A. Heinrich 《Mineralium Deposita》2008,43(5):533-552

Combined fluid inclusion microthermometry and microanalysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) are used to constrain the hydrothermal processes forming a typical Climax-type porphyry Mo deposit. Molybdenum mineralisation at Questa occurred in two superimposed hydrothermal stages, a magmatic-hydrothermal breccia and later stockwork veining. In both stages, texturally earliest fluids were single-phase, of low salinity (~7 wt.% NaCl_equiv.) and intermediate-density. Upon decompression to ~300 bar, they boiled off a vapour phase, leaving behind a residual brine (up to 45 wt.% NaCl_equiv) at temperatures of ~420°C. The highest average Mo concentrations in this hot brine were ~500 μg/g, exceeding the Mo content of the intermediate-density input fluid by about an order of magnitude and reflecting pre-concentration of Mo by fluid phase separation prior to MoS₂ deposition from the brine. Molybdenum concentrations in brine inclusions, then, decrease down to 5 μg/g, recording Mo precipitation in response to cooling of the saline liquid to ~360°C. Molybdenite precipitation from a dense, residual and probably sulphide-depleted brine is proposed to explain the tabular shape of the ore body and the absence of Cu-Fe sulphides in contrast to the more common Cu-Mo deposits related to porphyry stocks. Cesium and Rb concentrations in the single-phase fluids of the breccia range from 2 to 8 and from 40 to 65 μg/g, respectively. In the stockwork veins, Cs and Rb concentrations are significantly higher (45–90 and 110–230 μg/g, respectively). Because Cs and Rb are incompatible and hydrothermally non-reactive elements, the systematic increase in their concentration requires two distinct pulses of fluid exsolution from a progressively more fractionated magma. By contrast, major element and ore metal concentrations of these two fluid pulses remain essentially constant. Mass balance calculations using fluid chemical data from LA-ICPMS suggest that at least 25 km³ of melt and 7 Gt of deep input fluid were necessary to provide the amount of Mo contained in the stockwork vein stage alone. While the absolute amounts of fluid and melt are uncertain, the well-constrained element ratios in the fluids together with empirical fluid/melt partition coefficients derived from the inclusion analyses suggest a high water content of the source melt of ~10%. In line with other circumstantial evidence, these results suggest that initial fluid exsolution may have occurred at a confining pressure exceeding 5 kbar. The source of the molybdenum-mineralising fluids probably was a particularly large magma chamber that crystallised and fractionated in the lower crust or at mid-crustal level, well below the shallow intrusions immediately underlying Questa and other porphyry molybdenum deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Shale basins,sulfur-deficient ore brines and the formation of exhalative base metal deposits     

Fernando Tornos  Christoph A. Heinrich 《Chemical Geology》2008,247(1-2):195-207

The massive sulfide deposits of the Iberian Pyrite Belt are interbedded with felsic volcanic rocks and shale, and underlain by several thousand meters of siliciclastic sedimentary rocks known as the PQ Group. Isotope geochemistry and regional geology are both consistent with equilibration of the ore-forming fluids with the PQ Group, prior to ore deposition near the former seafloor. The average Cu:Zn:Pb ratio of the PQ Group rocks (ca. 26:55:19) is similar to the weighted average of all the massive sulfide orebodies combined (ca. 25:52:23).The genetic relationship between massive sulfide deposits and a siliciclastic sedimentary metal source is explained here by a thermodynamic model, proposing that mildly reducing redox conditions imposed by equilibration with the sedimentary rocks are most critical for the formation of an effective ore-forming fluid. Relatively metal-rich but organic-poor pyrite-bearing shale undergoing dewatering of saline pore fluids is an effective source for the generation of sulfur-deficient but relatively iron and base metal-rich brines. Thus, we propose that the giant deposits of the Iberian Pyrite Belt owe their existence not to exceptionally metal-enriched (e.g., magmatic) fluids, but to the existence of a fairly ordinary but large metal source in reactive siliciclastic sediments, combined with an underlying igneous heat source and a particularly efficient mechanism of sulfide precipitation by mixing with H₂S-rich fluids at or near the seafloor.Essentially similar mineral equilibria are imposed when saline fluids are buffered by typical continental basement rocks. Leaching of retrograde minerals and possibly residual salts from their magmatic or metamorphic prehistory is expected to generate similar, variably metal-rich but relatively sulfide-deficient fluids. Thus, the existence of mildly reducing rocks can be the dominant chemical control in the source of fluids generating many volcanogenic, Irish-type or sedex deposits, many of which are known to precipitate their metal load in response to biogenic sulfide addition at the ore deposition site.  相似文献   

Solar wind helium, neon, and argon isotopic and elemental composition: Data from the metallic glass flown on NASA’s Genesis mission     

Ansgar Grimberg  Heinrich Baur  Peter Bochsler 《Geochimica et cosmochimica acta》2008,72(2):626-645

Solar wind (SW) helium, neon, and argon trapped in a bulk metallic glass (BMG) target flown on NASA’s Genesis mission were analyzed for their bulk composition and depth-dependent distribution. The bulk isotopic and elemental composition for all three elements is in good agreement with the mean values observed in the Apollo Solar Wind Composition (SWC) experiment. Conversely, the He fluence derived from the BMG is up to 30% lower than values reported from other Genesis bulk targets or in-situ measurements during the exposure period. SRIM implantation simulations using a uniform isotopic composition and the observed bulk velocity histogram during exposure reproduces the Ne and Ar isotopic variations with depth within the BMG in a way which is generally consistent with observations. The similarity of the BMG release patterns with the depth-dependent distributions of trapped solar He, Ne, and Ar found in lunar and asteroidal regolith samples shows that also the solar noble gas record of extraterrestrial samples can be explained by mass separation of implanted SW ions with depth. Consequently, we conclude that a second solar noble gas component in lunar samples, referred to as the “SEP” component, is not needed. On the other hand, a small fraction of the total solar gas in the BMG released from shallow depths is markedly enriched in the light isotopes relative to predictions from implantation simulations with a uniform isotopic composition. Contributions from a neutral solar or interstellar component are too small to explain this shallow sited gas. We tentatively attribute this superficially implanted gas to low-speed, current-sheet related SW, which was fractionated in the corona due to inefficient Coulomb drag. This fractionation process could also explain relatively high Ne/Ar elemental ratios in the same initial gas fraction.  相似文献   

Patterns of heritability of decreased EROD activity and resistance to PCB 126-induced teratogenesis in laboratory-reared offspring of killifish (Fundulus heteroclitus) from a creosote-contaminated site in the Elizabeth River,VA, USA     

Meyer J  Di Giulio R 《Marine environmental research》2002,54(3-5):621-626

Killifish (Fundulus heteroclitus) from a highly contaminated site on the Elizabeth River are resistant to the acute toxicity and the cytochrome P4501A (CYP1A)-inducing activity of both the sediments from the site and chemically pure polycyclic aromatic hydrocarbons (PAHs). These effects are highly heritable for one generation, but heritable to a lesser degree by subsequent generations, in clean conditions in the laboratory. We show that offspring of this population of Elizabeth River killifish are also resistant to the teratogenicity and P4501A-inducing activity of PCB congener 126, a prototypical coplanar halogenated aromatic hydrocarbon (HAH). Furthermore, the pattern of greater resistance to acute toxicity and P4501A-inducing activity in the first generation and less in subsequent generations is also observed upon exposure to PCB-126.  相似文献   

The utility of the terms "bioavailability" and "bioavailable fraction" for metals   总被引：1，自引：0，他引：1  

Meyer JS 《Marine environmental research》2002,53(4):417-423

Because concentrations of total or dissolved metal usually are not good predictors of the acute toxicity of metals to aquatic biota (i.e. not all of the metal appears to be bioavailable), it has been tempting for researchers and regulators to attempt to identify a form or combination of forms of a metal that is the bioavailable fraction. But from geochemical, biological, and analytical perspectives, the term 'bioavailable fraction" is context-specific (i.e. not generalizable) and quantitatively elusive. Although the term "bioavailability" conveys a useful, general concept and should be retained in the aquatic-toxicology lexicon, the term "bioavailable fraction" should be avoided.  相似文献   

The GeoForschungsZentrum Potsdam/Groupe de Recherche de Gèodésie Spatiale satellite-only and combined gravity field models: EIGEN-GL04S1 and EIGEN-GL04C   总被引：2，自引：1，他引：1  

Christoph Förste  Roland Schmidt  Richard Stubenvoll  Frank Flechtner  Ulrich Meyer  Rolf König  Hans Neumayer  Richard Biancale  Jean-Michel Lemoine  Sean Bruinsma  Sylvain Loyer  Franz Barthelmes  Saskia Esselborn 《Journal of Geodesy》2008,82(6):331-346

The recent improvements in the Gravity Recovery And Climate Experiment (GRACE) tracking data processing at GeoForschungsZentrum Potsdam (GFZ) and Groupe de Recherche de Géodésie Spatiale (GRGS) Toulouse, the availability of newer surface gravity data sets in the Arctic, Antarctica and North-America, and the availability of a new mean sea surface height model from altimetry processing at GFZ gave rise to the generation of two new global gravity field models. The first, EIGEN-GL04S1, a satellite-only model complete to degree and order 150 in terms of spherical harmonics, was derived by combination of the latest GFZ Potsdam GRACE-only (EIGEN-GRACE04S) and GRGS Toulouse GRACE/LAGEOS (EIGEN-GL04S) mean field solutions. The second, EIGEN-GL04S1 was combined with surface gravity data from altimetry over the oceans and gravimetry over the continents to derive a new high-resolution global gravity field model called EIGEN-GL04C. This model is complete to degree and order 360 and thus resolves geoid and gravity anomalies at half- wavelengths of 55 km at the equator. A degree-dependent combination method has been applied in order to preserve the high accuracy from the GRACE satellite data in the lower frequency band of the geopotential and to form a smooth transition to the high-frequency information coming from the surface data. Compared to pre-CHAMP global high-resolution models, the accuracy was improved at a spatial resolution of 200 km (half-wavelength) by one order of magnitude to 3 cm in terms of geoid heights. The accuracy of this model (i.e. the commission error) at its full spatial resolution is estimated to be 15 cm. The model shows a reduced artificial meridional striping and an increased correlation of EIGEN-GL04C-derived geostrophic meridional currents with World Ocean Atlas 2001 (WOA01) data. These improvements have led to select EIGEN-GL04C for JASON-1 satellite altimeter data reprocessing. Electronic Supplementary Material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献