A self-consistent model of the magnetosphere with centrifugal wind,I     

Shinpei Shibata  Osamu Kaburaki 《Astrophysics and Space Science》1985,108(1):203-217

Under the purely centrifugal approximation (gravity and pressure force are neglected), stellar magnetospheres are classified into three main types of different physical properties in the two-dimensional parameter space. They are characterized essentially by the strength of the magnetic field and the plasma density, at the base of the magnetosphere. Among the three types, the type II magnetosphere has moderate surface densities for a given field strength, and is expected to possess a centrifugal wind blowing across the magnetic field lines without affecting them appreciably. Such a situation may be realized through a modification of the electric field from that under the ideal-MHD condition, owing to the inertia of a plasma. In order to illustrate this mechanism, the type II magnetosphere is taken up for a numerical simulation. The effect of artificial viscosity is avoided by integrating the characteristic equations for both components of the plasma, instead of solving the fluid equations directly. Our model reproduces a disk-like outflow of the centrifugal wind across the magnetic field lines which are closed through the equatorial plane.  相似文献   

Particulate peptidoglycan in seawater determined by the silkworm larvae plasma (SLP) assay     

Akira Shibata  Kouichi Ohwada  Masakazu Tsuchiya  Kazuhiro Kogure 《Journal of Oceanography》2006,62(1):91-97

Peptidoglycan (PG) is a biopolymer found exclusively in the cell wall of bacteria. Recent chemical analysis of particulate organic matter suggests that a major amount of the muramic acid, an amino sugar present only in PG, could not be accounted for in terms of bacterial cells (Benner and Kaiser, 2003); however, data on particulate PG is quite sparse. In the present study, conducted in 1996, the PG was examined at 5 sampling sites in the northwestern Pacific Ocean, and in natural seawater cultures. Particulate PG, which was concentrated using a 96-well filtration plate equipped with Durapore filters (pore size, 0.22 μm), was measured by the silkworm larvae plasma (SLP) assay. The PG concentration generally decreased with depth and correlated significantly with bacterial abundance throughout the entire water column. However, the ratio of particulate PG to bacterial abundance varied with depth. The average ratio was 0.61 ± 0.53 (average ± SD, n = 40) between 50 and 2000 m, which agreed with the bacterial cellular PG content from 0.63 to 1.1 fg cell⁻¹ obtained in seawater cultures. On the other hand, the ratios of PG to bacteria from the surface to 50 m (3.7 ± 2.6, n = 29) and below 2,000 m (2.1 ± 1.7, n = 7) were significantly higher than that between 50 and 2,000 m. These results may suggest that, in the surface and deep layers, a significant fraction of particulate PG was present in bacterial detritus, whereas this fraction was reduced in the middle layer.  相似文献   

Difference characteristics of sea surface temperature observed by GLI and AMSR aboard ADEOS-II     

Kohtaro Hosoda  Hiroshi Murakami  Akira Shibata  Futoki Sakaida  Hiroshi Kawamura 《Journal of Oceanography》2006,62(3):339-350

This study compares infrared and microwave measurements of sea surface temperature (SST) obtained by a single satellite. The simultaneous observation from the Global Imager (GLI: infrared) and the Advanced Microwave Scanning Radiometer (AMSR: microwave) aboard the Advanced Earth Observing Satellite-II (ADEOS-II) provided an opportunity for the intercomparison. The GLI-and AMSR-derived SSTs from April to October 2003 are analyzed with other ancillary data including surface wind speed and water vapor retrieved by AMSR and SeaWinds on ADEOS-II. We found no measurable bias (defined as GLI minus AMSR), while the standard deviation of difference is less than 1°C. In low water vapor conditions, the GLI SST has a positive bias less than 0.2°C, and in high water vapor conditions, it has a negative (positive) bias during the daytime (nighttime). The low spatial resolution of AMSR is another factor underlying the geographical distribution of the differences. The cloud detection problem in the GLI algorithm also affects the difference. The large differences in high-latitude region during the nighttime might be due to the GLI cloud-detection algorithm. AMSR SST has a negative bias during the daytime with low wind speed (less than 7 ms⁻¹), which might be related to the correction for surface wind effects in the AMSR SST algorithm.  相似文献   

A filament eruption and accompanying coronal field changes on November 5, 1992     

McAllister  A. H.  Kurokawa  H.  Shibata  K.  Nitta  N. 《Solar physics》1996,169(1):123-149

An H filament eruption on November 5, 1992 was fully observed in H with the Hida Flare Monitoring Telescope, while Yohkoh's Soft X-ray Telescope observed the pre- and post-eruption evolution of the coronal magnetic fields. From the H data, including the red and blue wings, we have reconstructed the rise of the filament, including trajectory, velocity, and acceleration. In combination with the Yohkoh data this reconstruction suggests that the filament had several interactions with other coronal magnetic fields during the eruption. The Yohkoh data also shows pre-eruption changes in the coronal fields and several post-eruption bright coronal structures. The pre-eruption changes are interpreted as a partial opening of the corona, indicating that it is not necessary to have a complete opening of the corona in order for a filament to erupt and we discuss the several possible contributions from emerging flux. The post-event bright coronal structures are compared with theory and with a cleaner filament eruption event on July 31, 1992. These comparisons suggest that, although there are many similarities, it is hard to completely reconcile the observations with the existing theory.  相似文献   

The effect of iron on montmorillonite stability. (I) Background and thermodynamic considerations   总被引：1，自引：0，他引：1  

James Wilson  David Savage  Masahiro Shibata 《Geochimica et cosmochimica acta》2006,70(2):306-322

It is envisaged that high-level nuclear waste (HLW) will be disposed of in underground repositories. Many proposed repository designs include steel waste canisters and bentonite backfill. Natural analogues and experimental data indicate that the montmorillonite component of the backfill could react with steel corrosion products to produce non-swelling Fe-rich phyllosilicates such as chamosite, berthierine, or Fe-rich smectite. In K-bearing systems, the alteration of montmorillonite to illite/glauconite could also be envisaged. If montmorillonite were altered to non-swelling minerals, the swelling capacity and self-healing properties of the bentonite backfill could be reduced, thereby diminishing backfill performance. The main aim of this paper was to investigate Fe-rich phyllosilicate mineral stability at the canister-backfill interface using thermodynamic modelling. Estimates of thermodynamic properties were made for Fe-rich clay minerals in order to construct approximate phase-relations for end-member/simplified mineral compositions in logarithmic activity space. Logarithmic activity diagrams (for the system Al₂O₃-FeO-Fe₂O₃-MgO-Na₂O-SiO₂-H₂O) suggest that if pore waters are supersaturated with respect to magnetite in HLW repositories, Fe(II)-rich saponite is the most likely montmorillonite alteration product (if f_O2(g) values are significantly lower than magnetite-hematite equilibrium). Therefore, the alteration of montmorillonite may not be detrimental to nuclear waste repositories that include Fe, as long as the swelling behaviour of the Fe-rich smectite produced is maintained. If f_O2(g) exceeds magnetite-hematite equilibrium, and solutions are saturated with respect to magnetite in HLW repositories, berthierine is likely to be more stable than smectite minerals. The alteration of montmorillonite to berthierine could be detrimental to the performance of HLW repositories.  相似文献   

Viscosity of peridotite liquid up to 13 GPa: Implications for magma ocean viscosities     

Christian Liebske  Bettina Schmickler  Hidenori Terasaki  Brent T. Poe  Akio Suzuki  Ken-ichi Funakoshi  Ryota Ando  David C. Rubie 《Earth and Planetary Science Letters》2005,240(3-4):589-604

The viscosity of synthetic peridotite liquid has been investigated at high pressures using in-situ falling sphere viscometry by combining a multi-anvil technique with synchrotron radiation. We used a newly designed capsule containing a small recessed reservoir outside of the hot spot of the heater, in which a viscosity marker sphere is embedded in a forsterite + enstatite mixture having a higher solidus temperature than the peridotite. This experimental setup prevents spheres from falling before a stable temperature above the liquidus is established and thus avoids difficulties in evaluating viscosities from velocities of spheres falling through a partially molten sample.

Experiments have been performed between 2.8 and 13 GPa at temperatures ranging from 2043 to 2523 K. Measured viscosities range from 0.019 (± 0.004) to 0.13 (± 0.02) Pa s. At constant temperature, viscosity increases with increasing pressure up to  8.5 GPa but then decreases between  8.5 and 13 GPa. The change in the pressure dependence of viscosity is likely associated with structural changes of the liquid that occur upon compression. By combining our results with recently published 0.1 MPa peridotite liquid viscosities [D.B. Dingwell, C. Courtial, D. Giordano, A. Nichols, Viscosity of peridotite liquid, Earth Planet. Sci. Lett. 226 (2004) 127–138.], the experimental data can be described by a non-Arrhenian, empirical Vogel-Fulcher-Tamman equation, which has been modified by adding a term to account for the observed pressure dependence of viscosity. This equation reproduces measured viscosities to within 0.08 log₁₀-units on average. We use this model to calculate viscosities of a peridotitic magma ocean along a liquid adiabat to a depth of  400 km and discuss possible effects on viscosity at greater pressures and temperatures than experimentally investigated.  相似文献   

Diagnosis of earth-fill dams by synthesised approach of sounding and surface wave method     

Shin-ichi Nishimura  Toshifumi Shibata  Takayuki Shuku 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2016,10(4):312-319

The spatial distribution of the strength inside the earth-fill is identified by the sounding tests. In this research, the Swedish weight sounding (SWS) is employed, and the spatial high-density test is performed to identify the spatial correlation structure. Furthermore, the synthesised approach of the SWS and surface wave method, which is one of the geophysical method, is proposed to compensate the shortage of each approach. Consequently, the correlation structure of an earth-fill could be identified accurately, and the high resolution of the spatial distribution could be visualised based on the survey results.  相似文献   

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating     

Yukio Isozaki  Shinji Yamamoto  Shuhei Sakata  Hideyuki Obayashi  Takafumi Hirata  Ken-ichi Obori  Toshinori Maebayashi  Satoshi Takeshima  Toshikazu Ebisuzaki  Shigenori Maruyama 《地学前缘(英文版)》2018,9(4):1073-1083

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.  相似文献   

Cause and countermeasure of long-period oscillations of moored ships and the quantification of surge and heave amplitudes     

Ken-ichi Uzaki  Nobuhiro Matsunaga  Yasuhiro Nishii  Yoshito Ikehata 《Ocean Engineering》2010,37(2-3):155-163

Long-period oscillations of moored ships whose periods are about 1 or 2 min cause many troubles in many ports and harbours. It is necessary to investigate these phenomena and verify their causes and countermeasures in each case because they are strongly dependent on the environment of each port and harbour. From this point of view, long-period oscillations of moored ships in the Port of Shibushi in Japan were investigated by means of wave observations, the image processing of moored ship motions using the video camera and motion-capture software and numerical simulations. From observation results, the relationship between offshore long-period waves and long-period oscillations of moored ships was recognized and surge and heave amplitudes were quantified by using wave data in order to forecast moored ship motions. Furthermore, from observation and numerical results, it was revealed that long-period waves with the peak period of 120 s from the offshore typhoon kept or exaggerated the local harbour oscillation of 60–70 s and it caused long-period oscillations of moored ships. Numerical results in case of reducing the reflection coefficient of the target berth implied that it ceased the local harbour oscillation and it would give an effective countermeasure to reduce long-period oscillations of moored ships in the Port of Shibushi.  相似文献   

Assessment of carbon- and fluorescence-based primary productivity in Ariake Bay,southwestern Japan     

S.C. Tripathy  J. Ishizaka  T. Fujiki  T. Shibata  K. Okamura  T. Hosaka  T. Saino 《Estuarine, Coastal and Shelf Science》2010

A comparative account of primary productivity (PP), in the characteristically turbid and highly dynamic waters of Ariake Bay, measured by ¹³C uptake and fast repetition rate fluorometer (FRRF) was conducted to ensure compatibility between the two methods. Estimates from both methods depicted strong linearity for both short-term (r² > 0.90) and daily (r² = 0.42–0.93) measurements, except in the near-surface (∼0 m) layer. ¹³C-based short-term (1 h; in situ) PP estimates showed similar magnitudes and trend with the instantaneous PP measured by FRRF concurrently. Whereas, unlike short-term measurements, the daily PP estimates from both methods showed large difference, with FRRF-based time integrated daily PP resulting in 1.09–1.82 times higher than the carbon-based daily (24 h; simulated in situ) PP. This difference between daily PP estimates was mainly due to: (1) the temporal variation of water column chlorophyll a (Chl a) because of frequent moving of water mass, and (2) the dissimilarity in ambient light field conditions between the two methods. Results revealed that considering the above two environmental factors invariable over a daylength, fairly close approximation of daily PP, compared to ¹³C-based daily PP, could be obtained from FRRF. Hence, FRRF-based daily PP can be considered as more realistic in this highly dynamic water body like Ariake Bay where water column parameters are subjected to strong temporal variation. The relationship between Chl a-specific photosynthetic rate (P^B) and the corresponding photosynthetically active radiation (PAR) in the water column (PAR–P^B relationship) was found to be linear for FRRF and curvilinear for ¹³C-based measurements in the near-surface layer, for the same intensities of incident PAR, and this is thought to be the primary basis for the higher difference in PP estimates at the near-surface layer. Considering the minor variations in FRRF-based time series of PAR–P^B relationships, a combined and/or instantaneous PAR–P^B relationship in combination with incubation Chl a and light field condition was used to obtain fairly close estimates of daily water column integrated PP from FRRF.  相似文献