利用光变曲线估计猎鹰九号火箭末级的旋转状态研究     

苏向泽  汤儒峰  李荣旺  李语强 《天文研究与技术》2021,(2):203-212

光度观测是地基观测空间目标的主要手段之一,利用光度信息能够估计空间目标的相关特征信息。为了更好地了解空间目标的旋转状态,选取具有代表性的猎鹰九号火箭末级作为研究对象,由其光变信息研究旋转状态。首先利用云南天文台1.2 m光学望远镜获取猎鹰九号火箭末级的光度数据,再对目标星等进行斜距归一化,得到目标光变信息并分析目标星等随时间变化的曲线,估计大致的旋转周期,再由相位离散最小化方法计算会合周期。根据太阳、目标和测站之间的位置关系、惯性主轴指向、旋转轴指向、初始相位等因素,采用姿态旋转矩阵计算理论星等,利用最小二乘原则确定惯性主轴方向及初相角度、旋转轴指向。最后给出了猎鹰九号火箭末级的旋转周期、会合周期以及旋转轴指向等参数,为后续开展其他空间目标光度信息研究提供参考。  相似文献   

黑河中游夏季昼夜水汽同位素特征及水汽来源分析          下载免费PDF全文

孟鸿飞  张明军  王圣杰  邱雪  杜铭霞  张亚宁  余秀秀  周苏娥 《干旱区地理》2020,43(2):360-370

基于2012年6~8月的实测水汽同位素数据及相关气象数据，对黑河中游夏季昼夜的同位素基本特征、水汽来源方向及潜在蒸发源地进行了研究。结果表明：空气水汽线斜率白天大于夜晚和水汽过量氘值白天大于夜晚，综合说明白天局地蒸发较夜晚强烈；夏季受西风水汽影响显著。其中，6月主要受西风水汽和北冰洋水汽影响，7、8月主要受西风水汽和东南方向水汽影响，且8月受东南方向水汽影响最为明显；水汽运移路径上下垫面地形和气压带移动会影响水汽后向轨迹高度，西北方向上水汽输送通道较顺畅，风速较大，有利于水汽的输送；水汽蒸发源地主要集中在研究区周围及以东、以北部，其次是西北部。绿洲是主要的水汽蒸发源地，其次是城市和河流，白天较夜晚局地蒸发强烈且面积大。  相似文献   

毛乌素沙地东南缘全新世气候不稳定性     

李想  苏志珠  马义娟  张彩霞  柳苗苗 《中国沙漠》2020,40(2):109-117

毛乌素沙地处于中国季风区的西北边缘,对气候变化敏感,是古气候演化和古环境变迁研究的理想场所。全新世气温回暖期,气候整体稳定但存在暖湿冷干的次级波动,不同类型沉积相组成的地层序列记录了全新世千年、百年尺度的气候不稳定性。对毛乌素沙地不同沉积序列的研究表明:(1)毛乌素沙地东南缘的沙漠/黄土边界带DLT、NB剖面粒度及Rb/Sr比值可作为气候变化的代用指标。>63 μm砂含量增加,Rb/Sr比值降低,揭示东亚冬季风增强,风成砂堆积,风沙活动加剧,气候干冷;反之,东亚夏季风增强,降水增多,风化成壤程度加大,气候暖湿。(2)毛乌素沙地东南缘沙漠/黄土边界带及低洼沟谷区年代概率密度函数的分析显示,全新世早期~8\^5 ka BP风成砂堆积,风沙活动加剧,气候表现为干冷;全新世中期8\^5 ka~3\^0 ka BP地势较高处古土壤广泛发育,地势低洼处发育湖沼相/泥炭层,但在6.0 ka BP左右存在气候转冷过程;全新世晚期3\^0 ka BP以来气候波动频繁。(3)毛乌素沙地气候变化与北大西洋冰筏冷事件、董哥洞石笋、季风边缘区湖泊、东部沙地等记录具有可对比性和相对一致性,反映出全新世千年和百年尺度上的气候变化主要受全球变化的影响,这对预测和模拟未来气候变化具有借鉴意义。  相似文献   

游客-环境互动视角下旅游者目的地环境恢复性效应     

朱芳  苏勤  陶云  沈惊宏 《热带地理》2020,40(4):636-648

日常生活环境和旅游目的地环境都可以为个体提供恢复的机会，不同环境的属性特征导致不同程度的恢复。为了探究环境类型与恢复性效应之间的关系及停留时间的调节作用，文章采用问卷调查方式，利用配对样本t检验和混合设计方差分析相结合的方法，探讨游客在不同环境中的恢复性效应，并对这一现象提供心理上的解释。结果表明：1）恢复体验的4个维度（放松体验、心理脱离、掌握体验、控制体验）在旅游目的地环境中的得分均高于日常生活环境。2）掌握和控制体验维度在城市旅游目的地中的变化程度高于乡村旅游目的地，两种类型目的地的放松和心理脱离维度差异较小。3）随着在目的地停留时间的延长，乡村旅游目的地放松体验和心理脱离维度变化程度高于城市旅游目的地，两种类型目的地环境恢复性效应会相互靠近。因此，游客的环境恢复性效应不仅受到环境和目的地类型的影响，同时还与游客的适应程度有关，且受到其停留时间的调节作用。  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio     

Abouzar Jafari  Mohammad Reza Ghasemi  Habib Akbarzadeh Bengar  Behrooz Hassani 《Bulletin of Earthquake Engineering》2018,16(2):831-858

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

Probabilistic seismic hazard assessment for South-Eastern France     

Christophe Martin  Gabriele Ameri  David Baumont  David Carbon  Gloria Senfaute  Jean-Michel Thiry  Ezio Faccioli  Jean Savy 《Bulletin of Earthquake Engineering》2018,16(6):2477-2511

The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods.  相似文献   

Assessment of the influence of horizontal diaphragms on the seismic performance of vernacular buildings     

Javier Ortega  Graça Vasconcelos  Hugo Rodrigues  Mariana Correia 《Bulletin of Earthquake Engineering》2018,16(9):3871-3904

The awareness and preservation of the vernacular heritage and traditional construction techniques and materials is crucial as a key element of cultural identity. However, vernacular architecture located in earthquake prone areas can show a particularly poor seismic performance because of inadequate construction practices resulting from economic restraints and lack of resources. The horizontal diaphragms are one of the key aspects influencing the seismic behavior of buildings because of their major role transmitting the seismic actions to the vertical resisting elements of the structure. This paper presents a numerical parametric study adopted to understand the seismic behavior and resisting mechanisms of vernacular buildings according to the type of horizontal diaphragm considered. Detailed finite element modeling and nonlinear static (pushover) analyses were used to perform the thorough parametric study aimed at the evaluation and quantification of the influence of the type of diaphragm in the seismic behavior of vernacular buildings. The reference models used for this study simulate representative rammed earth and stone masonry vernacular buildings commonly found in the South of Portugal. Therefore, this paper also contributes for a better insight of the structural behavior of vernacular earthen and stone masonry typologies under seismic loading.  相似文献   

Experimental study on seismic behavior of Un-Reinforced Masonry (URM) brick walls strengthened with shotcrete     

M. Shabdin  Nader K. A. Attari  M. Zargaran 《Bulletin of Earthquake Engineering》2018,16(9):3931-3956

In this study, the efficiency of conventional shotcrete technique for strengthening of Un-Reinforced Masonry (URM) walls was shown using an experimental program. In addition, in this program the possible benefit of using anchors for connecting the shotcrete reinforcement layer to the R/C foundation was studied. The experimental program consisted of testing five full scale specimens with two different height-to-length aspect ratios and so different failure modes, under in-plane cyclic loading conditions. Two specimens were tested as reference and others were strengthened on a single-face using shotcrete layer. According to the results, strengthening of URM walls using traditional shotcrete approach created a completely stiff panel and prevented the formation of cracks. The failure mode in both reference and strengthened short length walls was rocking and the shotcrete layer could increase the strength capacity, energy dissipation, and stiffness of wall due to yielding and rupture of steel bars anchored to the foundation. On the other hand, in strengthened long length walls, shotcrete layer increased the shear sliding capacity with no or small increasing in their rocking capacity. Therefore, the failure mode of strengthened walls converted from shear sliding to rocking, even in the specimen with anchorage system. The distributed type of anchorage system could not improve the strength capacity of long length wall. Anchorage system was able to improve the out-of-plane performance of strengthened walls.  相似文献