Long‐term temporal and spatial patterns in bioeroding sponge distribution at the Abrolhos Bank,Brazil, Southwestern Atlantic     

Fernando Coreixas de Moraes  Fernanda Cervi  Cludia S. Karez  Leonardo T. Salgado  Rodrigo L. Moura  Gabriella A. Leal  Alex C. Bastos  Gilberto M. Amado‐Filho 《Marine Ecology》2019,40(3)

Bioeroding sponges belong to the most dominant bioeroders, significantly contributing to the erosion of coral reefs. Some species are tolerant or even benefit from environmental conditions such as ocean warming, acidification, and eutrophication. In consequence, increases in sponge bioerosion have been observed on some coral reefs over the last decades. The Abrolhos Bank is the largest coral reef system in the South Atlantic. It has been affected by sedimentation, eutrophication, overfishing, and climate change, mainly affecting coastal reefs, and at lesser intensity outer ones as well. This study aimed to describe spatial and temporal patterns in bioeroding sponge distribution in carbonate substrates in the Abrolhos Bank. Photo‐quadrats were used to compare bioeroding sponge abundance between two shallow reefs: a coastal, Pedra de Leste (PL), and an outer reef, Parcel dos Abrolhos (PAB). Each individual was delimitated over the substrate by determining the sponge surface through a line connecting the outermost papillae. The study was conducted over 6 years in 2008–2009 and 2013–2016. Four species of bioeroding sponges were identified: Cliona carteri Ridley, 1881, C. delitrix Pang, 1973, C. cf. schmidtii Ridley, 1881, and Siphonodictyon coralliphagum Rützler, 1971. The distribution and abundance of species varied between the inner and outer reefs and across the years, and displayed certain selectivity for the calcareous substrates recorded. Crustose coralline algae (CCA) were the main substrate excavated by the most abundant bioeroding species, C. carteri, and represented 70% of the substrate types occupied by this sponge (CCA, coral overgrown by CCA and plain coral). The highest abundance of bioeroding sponges observed in photo‐quadrats was 21.3 individuals/m² at the outer reefs (PAB) in 2014. The abundances or areal extents of bioeroding sponges were up to 10 times greater on the outer reefs than on the coastal ones, where sedimentation is higher and more strongly influenced by siliciclastic material. Moreover, a higher herbivorous fish biomass has been reported on outer reefs which could also influence the higher abundance of bioeroding sponges in outer reefs. During the study period of 6 years, an increase in bioeroding sponge abundance was observed at the outer reefs (PAB), with the sea surface temperature increase. As CCA have an important role in reefal cementation and carbonate production in the Abrolhos reefs, a bioerosion impact might be expected, in particular, on the outer reefs.  相似文献   

Analysis of soil drying incorporating a constitutive model for curling     

Maedo  Michael  Sánchez  Marcelo  Aljeznawi  Duaa  Manzoli  Osvaldo  Guimarães  Leonardo J. N.  Cleto  Pedro Rogério 《Acta Geotechnica》2020,15(9):2619-2635

This paper focuses on the shrinkage behavior of soil specimens involving sand, kaolinite, and kaolinite/sand mixtures subjected to desiccation under controlled conditions. Both, free and restrained shrinkage conditions are studied. The experiments show that pure soils do not curl upon unrestrained shrinkage; however, (under the same conditions) kaolinite/sand mixtures exhibited a marked curling. Furthermore, the mixture with the higher sand content broke through the middle of the sample after displaying a significant curling. Soils subjected to restricted shrinkage developed cracks with slight curling. To simulate the observed behavior, a mechanical model able to reproduce the detachment of the soil sample from the mold is proposed in this work and implemented in a fully coupled hydro-mechanical finite-element code. It is concluded that suction and differential shrinkage are key factors influencing the curling behavior of soils. The proposed framework was able to satisfactorily explain and reproduce the different stages and features of soil behavior observed in the experiments.

  相似文献   

Flexural deformation controls on Late Quaternary sediment dispersal in the Garo-Rajmahal Gap,NW Bengal Basin     

Jean-Louis Grimaud  Celine Grall  Steven Goodbred  Michael S. Steckler  Ryan Sincavage  Jennifer L. Pickering  Chris Paola  Leonardo Seeber  Md. Saddam Hossain 《Basin Research》2020,32(5):1242-1260

Subsurface deformation is a driver for river path selection when deformation rates become comparable to the autogenic mobility rate of rivers. Here we combine geomorphology, soil and sediment facies analyses, and geophysical data of the Late Quaternary sediments of the central Garo-Rajmahal Gap in Northwest Bengal to link subsurface deformation with surface processes. We show variable sedimentation characteristics, from slow rates (<0.8 mm/year) in the Tista megafan at the foot of the Himalaya to nondeposition at the exposed surface of the Barind Tract to the south, enabling the development of mature soils. Combined subsidence in the Tista fan and uplift of the Barind Tract are consistent with a N-S flexural response of the Indian plate to loading of the Himalaya Mountains given a low value of elastic thickness (15–25 km). Provenance analysis based on bulk strontium concentration suggests a dispersal of sediment consistent with this flexural deformation—in particular the abandonment of the Barind Tract by a Pleistocene Brahmaputra River and the current extents of the Tista megafan lobes. Overall, these results highlight the control by deeply rooted deformation patterns on the routing of sediment by large rivers in foreland settings.  相似文献   

An algorithm to resolve γ-rays from charged cosmic rays with DAMPE     

Zun-Lei Xu  Kai-Kai Duan  Zhao-Qiang Shen  Shi-Jun Lei  Tie-Kuang Dong  Fabio Gargano  Simone Garrappa  Dong-Ya Guo  Wei Jiang  Xiang Li  Yun-Feng Liang  Mario Nicola Mazziotta  Maria Fernanda Munoz Salinas  Meng Su  Valerio Vagelli  Qiang Yuan  Chuan Yue  Jing-Jing Zang  Ya-Peng Zhang  Yun-Long Zhang  Stephan Zimmer 《天文和天体物理学研究(英文版)》2018,(3)

The DArk Matter Particle Explorer(DAMPE),also known as Wukong in China,which was launched on 2015 December 17,is a new high energy cosmic ray and γ-ray satellite-borne observatory.One of the main scientific goals of DAMPE is to observe Ge V-Te V high energy γ-rays with accurate energy,angular and time resolution,to indirectly search for dark matter particles and for the study of high energy astrophysics. Due to the comparatively higher fluxes of charged cosmic rays with respect to γ-rays,it is challenging to identify γ-rays with sufficiently high efficiency,minimizing the amount of charged cosmic ray contamination. In this work we present a method to identify γ-rays in DAMPE data based on Monte Carlo simulations,using the powerful electromagnetic/hadronic shower discrimination provided by the calorimeter and the veto detection of charged particles provided by the plastic scintillation detector. Monte Carlo simulations show that after this selection the number of electrons and protons that contaminate the selected γ-ray events at～10 Ge V amounts to less than 1% of the selected sample.Finally,we use flight data to verify the effectiveness of the method by highlighting known γ-ray sources in the sky and by reconstructing preliminary light curves of the Geminga pulsar.  相似文献   

Detecting the stepwise propagation of the Eastern Sicily thrust belt (Italy): insight from thermal and thermochronological constraints     

Lea Di Paolo  Valerio Olivetti  Sveva Corrado  Luca Aldega  Maria Laura Balestrieri  Rosanna Maniscalco 《地学学报》2014,26(5):363-371

An extensive dataset of vitrinite reflectance, FTIR parameters on organic matter, illite content in mixed layers illite‐smectite, apatite fission tracks and U‐Th/He dating has been used to reconstruct the stepwise propagation of the Eastern Sicily fold‐and‐thrust belt during Late Palaeogene and Neogene times. The results indicate that the fold‐and‐thrust belt is divisible into two levels of thermal maturity. These levels consist of a less evolved level of thermal maturity that records limited sedimentary burial and minor heating, and a more evolved level of thermal maturity that indicates tectonic burial and exhumation at different times. Deformation and exhumation of shallowly buried units are linked to wedge forward propagation by low‐angle thrusts, whereas the evolution of deeply buried units is associated with tectonic imbrications by duplex formation and steep thrusts. The two tectonic styles alternate during evolution of the fold‐and‐thrust belt under low erosion rates.  相似文献   

Using Clustered Heat Maps in Mineral Exploration to Visualize Volcanic-Hosted Massive Sulfide Alteration and Mineralization     

Feltrin  Leonardo  Bertelli  Martina 《Natural Resources Research》2020,29(1):311-344

Natural Resources Research - This study proposes an extension of a visualization approach common in biochemistry (the clustered heat maps—CHMs) to geochemical data with the main objective of...  相似文献   

Disentangling the role of the Pacific and Atlantic Oceans during the Amazonian droughts in 2015     

Schumacher  Vanúcia  Justino  Flávio  Leonardo  Noele F.  Pereira  Marcos P. 《Theoretical and Applied Climatology》2022,148(3-4):1057-1067

Theoretical and Applied Climatology - El Niño events lead to worldwide changes in the inter-annual variability of precipitation, and more in particular to South America droughts. In the year...  相似文献   

An orthotropic interface damage model for simulating drying processes in soils     

Osvaldo Manzoli  Marcelo Sánchez  Michael Maedo  Jumanah Hajjat  Leonardo J. N. Guimarães 《Acta Geotechnica》2018,13(5):1171-1186

The study of drying process in soils has received an increased attention in the last few years. This is very complex phenomenon that generally leads to the formation and propagation of desiccation cracks in the soil mass. In recent engineering applications, high aspect ratio elements have proved to be well suited to tackle this type of problem using finite elements. However, the modeling of interfaces between materials with orthotropic properties that generally exist in this type of problem using standard (isotropic) constitutive model is very complex and challenging in terms of the mesh generation, leading to very fine meshes that are intensive CPU demanding. A novel orthotropic interface mechanical model based on damage mechanics and capable of dealing with interfaces between materials in which the strength depends on the direction of analysis is proposed in this paper. The complete mathematical formulation is presented together with the algorithm suggested for its numerical implementation. Some simple yet challenging synthetic benchmarks are analyzed to explore the model capabilities. Laboratory tests using different textures at the contact surface between materials were conducted to evaluate the strengths of the interface in different directions. These experiments were then used to validate the proposed model. Finally, the approach is applied to simulate an actual desiccation test involving an orthotropic contact surface. In all the application cases the performance of the model was very satisfactory.  相似文献   

High-dimensional geostatistical history matching     

João Carneiro  Leonardo Azevedo  Maria Pereira 《Computational Geosciences》2018,22(2):607-622

Hydrocarbon reservoir modelling and characterisation is a challenging subject within the oil and gas industry due to the lack of well data and the natural heterogeneities of the Earth’s subsurface. Integrating historical production data into the geo-modelling workflow, commonly designated by history matching, allows better reservoir characterisation and the possibility of predicting the reservoir behaviour. We present herein a geostatistical-based multi-objective history matching methodology. It starts with the generation of an initial ensemble of the subsurface petrophysical property of interest through stochastic sequential simulation. Each model is then ranked according the match between its dynamic response, after fluid flow simulation, and the observed available historical production data. This enables building regionalised Pareto fronts and the definition of a large ensemble of optimal subsurface Earth models that fit all the observed production data without compromising the exploration of the uncertainty space. The proposed geostatistical multi-objective history matching technique is successfully implemented in a benchmark synthetic reservoir dataset, the PUNQ-S3, where 12 objectives are targeted.  相似文献   

Generative Adversarial Network Applied to Ore Type Modeling in Complex Geological Environments     

Jordão  Helga  Azevedo  Leonardo  Sousa  António Jorge  Soares  Amílcar 《Mathematical Geosciences》2022,54(7):1165-1182

Mathematical Geosciences - In complex geological environments, the spatial domain characterization of different ore types has been one of the most important challenges in the assessment of mineral...  相似文献