In stellar interferometers, the fast-steering mirror (FSM) is widely utilized to correct the wavefront tilt caused by the atmospheric turbulence and internal instrumental vibration, because of its high resolution and fast response frequency. In this study, the non-coplanar error between the FSM and the actuator deflection axis introduced by the manufacturing, assembly, and adjustment is analyzed systematically. Via a numerical method, the additional optical path difference (OPD) caused by the above factors is studied, and its effect on the fringe tracking accuracy of a stellar interferometer is also discussed. On the other hand, the starlight parallelism between the beams of two arms is one of the main factors for the loss of fringe visibility. By analyzing the influence of wavefront tilt caused by the atmospheric turbulence on fringe visibility, a simple and efficient real-time correction scheme of starlight parallelism is proposed based on a single array detector. The feasibility of this scheme is demonstrated by a laboratory experiment. The results show that after the correction of fast-steering mirror, the starlight parallelism meets preliminarily the requirement of a stellar interferometer on the wavefront tilt. 相似文献
This paper focuses on the effects of two types of El Niño events on tropical cyclone activity. We classified El Niño events from 1961 to 2015 according to their sea surface temperature (SST) anomalies into an eastern type and a central type. Then we selected strong tropical cyclones to statistically analyze the tropical cyclone characteristics during different events and their effects, as well as to study the possible mechanisms related to thermodynamic and dynamic factors. The tropical cyclone generation areas were found to be very similar during the two kinds of events. The average number of tropical cyclone in the eastern event is more than that in central event, and the hurricane in northeastern Pacific (HNP) has more energy than the typhoon in northwestern Pacific (TNP) in all cases. The seasonal distribution of the TNP high-incidence centers during central El Niño events is opposite to that of the HNP. The TNP accumulated cyclone energy (ACE) intensity is similar in the fall and summer, and the HNP ACE intensity in the summer is greater than that in the fall. The SSTs are consistent with the TNP and HNP movement trends. The Walker circulation intensity was strongly affected by the eastern events, but it quickly returned to its normal state, while the intensity was slightly reduced in the central events, and it slowly returned to its normal state. The vertical velocity distributions in the Pacific are different at different stages of both events, and the distributions of vertical velocity anomalies for typhoons and hurricanes are consistent. 相似文献
The northern slope of the South China Sea is a gas-hydrate-bearing region related to a high deposition rate of organic-rich sediments co-occurring with intense methanogenesis in subseafloor environments.Anaerobic oxidation of methane(AOM) coupled with bacterial sulfate reduction results in the precipitation of solid phase minerals in seepage sediment,including pyrite and gypsum.Abundant aggregates of pyrites and gypsums are observed between the depth of 667 and 850 cm below the seafloor(cmbsf) in the entire core sediment of HS328 from the northern South China Sea.Most pyrites are tubes consisting of framboidal cores and outer crusts.Gypsum aggregates occur as rosettes and spheroids consisting of plates.Some of them grow over pyrite,indicating that gypsum precipitation postdates pyrite formation.The sulfur isotopic values(δ~(34) S) of pyrite vary greatly(from –46.6‰ to –12.3‰ V-CDT) and increase with depth.Thus,the pyrite in the shallow sediments resulted from organoclastic sulfate reduction(OSR) and is influenced by AOM with depth.The relative high abundance and δ~(34) S values of pyrite in sediments at depths from 580 to 810 cmbsf indicate that this interval is the location of a paleo-sulfate methane transition zone(SMTZ).The sulfur isotopic composition of gypsum(from–25‰ to –20.7‰) is much lower than that of the seawater sulfate,indicating the existence of a 34 S-depletion source of sulfur species that most likely are products of the oxidation of pyrites formed in OSR.Pyrite oxidation is controlled by ambient electron acceptors such as MnO_2,iron(Ⅲ) and oxygen driven by the SMTZ location shift to great depths.The δ~(34) S values of gypsum at greater depth are lower than those of the associated pyrite,revealing downward diffusion of 34 S-depleted sulfate from the mixture of oxidation of pyrite derived by OSR and the seawater sulfate.These sulfates also lead to an increase of calcium ions from the dissolution of calcium carbonate mineral,which will be favor to the formation of gypsum.Overall,the mineralogy and sulfur isotopic composition of the pyrite and gypsum suggest variable redox conditions caused by reduced seepage intensities,and the pyrite and gypsum can be a recorder of the intensity evolution of methane seepage. 相似文献
The transfer and evolution of stress among rock blocks directly change the void ratios of crushed rock masses and affect the flow of methane in coal mine gobs. In this study, a Lagrange framework and a discrete element method, along with the soft-sphere model and EDEM numerical software, were used. The compaction processes of rock blocks with diameters of 0.6, 0.8, and 1.0 m were simulated with the degrees of compression set at 0%, 5%, 10%, 15%, 20%, and 25%. This study examines the influence of stress on void ratios of compacted crushed rock masses in coal mine gobs. The results showed that stress was mainly transmitted downward through strong force chains. As the degree of compression increased, the strong force chains extended downward, which resulted in the stress at the upper rock mass to become significantly higher than that at the lower rock mass. It was determined that under different degrees of compression, the rock mass of coal mine gobs could be divided, from the bottom to the top, into a lower insufficient compression zone (ICZ) and an upper sufficient compression zone (SCZ). From bottom to top, the void ratios in the ICZ sharply decreased and those in the SCZ slowly decreased. Void ratios in the ICZ were 1.2–1.7 times higher than those in the SCZ.