利用海洋重力场变化分析洋底板块运动          下载免费PDF全文

李倩倩  鲍李峰  C. K. Shum 《地球物理学报》2020,63(7):2506-2515

洋底板块运动是地球动力学和全球变化研究的重要内容.本文根据质量迁移与地球外部重力场变化的对应关系,利用不同时期测高资料推算的1995—2019全球海洋重力场变化结果,反演分析全球洋底板块运动特征.研究表明,板块汇聚边界、板块内无震海岭、海山群、断裂带等区域重力异常变化显著,而在板块离散边界无明显变化趋势;西南印度洋中脊、大西洋中脊、中印度洋中脊等地区重力异常垂直梯度变化显著,且在西太平洋俯冲带、部分海岭区域也存在明显变化,其空间分布与地形基本吻合.海洋重力场变化整体上准确反映了全球洋底板块构造运动.相较于重力异常变化反演结果,重力垂直梯度的变化能够更为准确地反映洋底板块运动特征,特别是在洋中脊区域,扩张速率越小,垂直重力梯度变化越显著.此外,详细讨论了测高海洋重力场不确定因素对洋底板块运动分析结果的影响,海面坡度改正是主要因素之一.  相似文献   

Terrestrial LiDAR monitoring of coastal foredune evolution in managed and unmanaged systems     

I. Conery  K. Brodie  N. Spore  J. Walsh 《地球表面变化过程与地形》2020,45(4):877-892

Coastal dunes provide essential protection for infrastructure in developed regions, acting as the first line of defence against ocean-side flooding. Quantifying dune erosion, growth and recovery from storms is critical from management, resiliency and engineering with nature perspectives. This study utilizes 22 months of high-resolution terrestrial LiDAR (Riegl VZ-2000) observations to investigate the impact of management, anthropogenic modifications and four named storms on dune morphological evolution along ~100 m of an open-coast, recently nourished beach in Nags Head, NC. The influences of specific management strategies – such as fencing and plantings – were evaluated by comparing these to the morphologic response at an unmanaged control site at the USACE Field Research Facility (FRF) in Duck, NC (33 km to the north), which experienced similar environmental forcings. Various beach-dune morphological parameters were extracted (e.g. backshore-dune volume) and compared with aeolian and hydrodynamic forcing metrics between each survey interval. The results show that LiDAR is a useful tool for quantifying complex dune evolution over fine spatial and temporal scales. Under similar forcings, the managed dune grew 1.7 times faster than the unmanaged dune, due to a larger sediment supply and enhanced capture through fencing, plantings and walkovers. These factors at the managed site contributed to the welding of the incipient dune to the primary foredune over a short period of less than a year, which has been observed to take up to decades in natural systems. Storm events caused alongshore variable dune erosion primarily to the incipient dune, yet also caused significant accretion, particularly along the crest at the managed site, resulting in net dune growth. Traditional empirical Bagnold equations correlated with observed trends of backshore-dune growth but overpredicted magnitudes. This is likely because these formulations do not encompass supply-limiting factors and erosional processes. © 2019 John Wiley & Sons, Ltd.  相似文献   

Evaluation of Interactions Between Oilfield Chemicals and Reservoir Rocks     

Wuyep  E. O.  Oluyemi  G. F.  Yates  K.  Akisanya  A. R. 《Natural Resources Research》2020,29(2):1239-1258

Natural Resources Research - Sand failure and production occurs when the formation stress exceeds the strength of the formation, which is derived majorly from the natural material that cements the...  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio     

Abouzar Jafari  Mohammad Reza Ghasemi  Habib Akbarzadeh Bengar  Behrooz Hassani 《Bulletin of Earthquake Engineering》2018,16(2):831-858

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

Probabilistic seismic hazard assessment for South-Eastern France     

Christophe Martin  Gabriele Ameri  David Baumont  David Carbon  Gloria Senfaute  Jean-Michel Thiry  Ezio Faccioli  Jean Savy 《Bulletin of Earthquake Engineering》2018,16(6):2477-2511

The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods.  相似文献   

Assessment of the influence of horizontal diaphragms on the seismic performance of vernacular buildings     

Javier Ortega  Graça Vasconcelos  Hugo Rodrigues  Mariana Correia 《Bulletin of Earthquake Engineering》2018,16(9):3871-3904

The awareness and preservation of the vernacular heritage and traditional construction techniques and materials is crucial as a key element of cultural identity. However, vernacular architecture located in earthquake prone areas can show a particularly poor seismic performance because of inadequate construction practices resulting from economic restraints and lack of resources. The horizontal diaphragms are one of the key aspects influencing the seismic behavior of buildings because of their major role transmitting the seismic actions to the vertical resisting elements of the structure. This paper presents a numerical parametric study adopted to understand the seismic behavior and resisting mechanisms of vernacular buildings according to the type of horizontal diaphragm considered. Detailed finite element modeling and nonlinear static (pushover) analyses were used to perform the thorough parametric study aimed at the evaluation and quantification of the influence of the type of diaphragm in the seismic behavior of vernacular buildings. The reference models used for this study simulate representative rammed earth and stone masonry vernacular buildings commonly found in the South of Portugal. Therefore, this paper also contributes for a better insight of the structural behavior of vernacular earthen and stone masonry typologies under seismic loading.  相似文献   

Experimental study on seismic behavior of Un-Reinforced Masonry (URM) brick walls strengthened with shotcrete     

M. Shabdin  Nader K. A. Attari  M. Zargaran 《Bulletin of Earthquake Engineering》2018,16(9):3931-3956

In this study, the efficiency of conventional shotcrete technique for strengthening of Un-Reinforced Masonry (URM) walls was shown using an experimental program. In addition, in this program the possible benefit of using anchors for connecting the shotcrete reinforcement layer to the R/C foundation was studied. The experimental program consisted of testing five full scale specimens with two different height-to-length aspect ratios and so different failure modes, under in-plane cyclic loading conditions. Two specimens were tested as reference and others were strengthened on a single-face using shotcrete layer. According to the results, strengthening of URM walls using traditional shotcrete approach created a completely stiff panel and prevented the formation of cracks. The failure mode in both reference and strengthened short length walls was rocking and the shotcrete layer could increase the strength capacity, energy dissipation, and stiffness of wall due to yielding and rupture of steel bars anchored to the foundation. On the other hand, in strengthened long length walls, shotcrete layer increased the shear sliding capacity with no or small increasing in their rocking capacity. Therefore, the failure mode of strengthened walls converted from shear sliding to rocking, even in the specimen with anchorage system. The distributed type of anchorage system could not improve the strength capacity of long length wall. Anchorage system was able to improve the out-of-plane performance of strengthened walls.  相似文献   

Evolution of seismic hazard maps in Turkey     

S. Akkar  T. Azak  T. Çan  U. Çeken  M. B. Demircioğlu Tümsa  T. Y. Duman  M. Erdik  S. Ergintav  F. T. Kadirioğlu  D. Kalafat  Ö. Kale  R. F. Kartal  K. Kekovalı  T. Kılıç  S. Özalp  S. Altuncu Poyraz  K. Şeşetyan  S. Tekin  A. Yakut  M. T. Yılmaz  M. S. Yücemen  Ö. Zülfikar 《Bulletin of Earthquake Engineering》2018,16(8):3197-3228

A review on the historical evolution of seismic hazard maps in Turkey is followed by summarizing the important aspects of the updated national probabilistic seismic hazard maps. Comparisons with the predecessor probabilistic seismic hazard maps as well as the implications on the national design codes conclude the paper.  相似文献