Optical fibre–based sensors have now established their place in the field of geohazard monitoring due to their sensitivity to strain and temperature changes. Progressive development in the technology leads to the availability of novel, accurate and durable sensors at a relatively limited cost. This creates room for original monitoring applications that have been, so far, impeded by the shortcomings of conventional monitoring tools. In this work, we explore the applicability of an interferometric optical fibre sensor as a vibration sensing tool at laboratory scale. We tested the ability of the sensor to identify precursors of instability in a downscaled model of a rainfall-induced landslide composed of granular material. We carried out four experimental tests which involved different sensor deployments and soil mixtures. The recorded signals were processed by means of a time–frequency analysis and we identified two frequency-domain parameters—the spectral centroid and band power—that could provide information on the development of instability. Their ratio yielded a unique parameter through which a precursory stage could be outlined by defining a threshold value based on the data collected at the beginning of the experiment. In our lab tests, precursors of instability were detected 2–3 min before a crack was observed at the surface. This may upscale to a lead time of about 20–30 min or more in the field, classifying our monitoring approach in between an alarm and a warning system. The work presented here can be considered a first promising step towards an innovative monitoring system and shows the potential of optical fibre sensing as a shallow landslide monitoring technique, encouraging further testing, especially in real-case studies.
Acta Geotechnica - The most common cause of slope instability is intense or sustained rainfall, which may induce reduction in soil suction, and thus, shear strength. Capillary barrier systems... 相似文献
In a mountain environment, the transport of coarse material is a key factor for many fields such as geomorphology, ecology, hazard assessment, and reservoir management. Despite this, there have been only a few field investigations of bedload, in particular using multiple monitoring methods. In this sense, attention has frequently focused on the effects of “high magnitude/low frequency floods” rather than on “ordinary events”. This study aims to analyze the sediment dynamics triggered by three high-frequency floods (recurrence interval “RI” between 1.1 and 1.7 yr) that occurred in the Rio Cordon basin during 2014. The flood events were investigated in terms of both sediment mobility and bedload magnitude. The Rio Cordon is an Alpine basin located in northeastern Italy. The catchment has a surface area of 5 km2, ranging between 1763 and 2763 m above sea level. The Rio Cordon flows on an armored streambed layer, with a stable step-pool configuration and large boulders. Since 1986, the basin has been equipped with a permanent station to continuously monitor water discharge and sediment flux. To investigate sediment mobility, 250 PIT-tags were installed in the streambed in 2012. The 2014 floods showed a clear difference in terms of tracer displacement. The near-bankfull events showed equal mobility conditions, with mean travel distance one order of magnitude higher than the below-bankfull event. Furthermore, only the near-bankfull events transported coarse material to the monitoring station. Both events had a peak discharge up to 2.06 m3 s-1, but the bedload transport rates differed by more than one order of magnitude, proving that under the current supply-limited condition, the bedload appears more related to the sediment supply than to the magnitude of the hydrological features. In this sense, the results demonstrated that near-bankfull events can mobilize large amounts of material for long distances, and that floods of apparently similar magnitude may lead to different sediment dynamics, depending on the type and amount of sediment supply. 相似文献
The Radicofani Volcano is characterised by few lava flows, a cinder cone and a denudated neck, and is part of the Tuscan Magmatic Province, the northernmost volcanic region of the Italian peninsula. In spite of the short time span of activity, a large time-dependant chemical and isotopic variability is observed. Most of the rocks of the Radicofani volcano are ultrapotassic shoshonites associated to younger basaltic andesites, found at the bottom of the neck. K2O contents are positively correlated with trace element and isotopic variations. Shoshonitic and high-K calc-alkaline rocks of the Radicofani volcano are significantly different from shoshonites occurring in association with leucite-bearing ultrapotassic rocks in the southernmost portion of the Roman Magmatic Province. The studied rocks are characterised by high, but variable, levels of incompatible trace elements with a subduction-related signature, with troughs at Ba, Ta, Nb, and Ti, and peaks at Cs, K, Th, U, and Pb. Initial values of 87Sr/86Sr range from 0.71333 to 0.71588, 143Nd/144Nd ranges from 0.512050 to 0.512183, while the lead isotope ratios vary between 18.672 and 18.716 for 206Pb/204Pb, 15.665 to 15.696 for 207Pb/204Pb, and 39.981 to 39.081 for 208Pb/204Pb. Ultrapotassic shoshonites show the highest incompatible trace element contents coupled with the highest 87Sr/86Sr and the lowest 143Nd/144Nd. On the basis of geochemical and isotopic signatures it is argued that magmas were generated in a modified lithospheric peridotitic source containing metasomatic veins generated by K-rich melts from recycled sediments within the mantle via subduction. A further metasomatic event generated by slab-derived fluids pervasively enriched the peridotitic source. Partial melting of the veins produced leucite-free ultrapotassic magmas (i.e. lamproite), and was triggered by rising of the isotherms after the orogenic front migrated eastward in the Italian Peninsula. Further rise of the isotherms induced larger degrees of partial melting inducing melting of the surrounding wall peridotite. The variation of the degree of partial melting of such a heterogeneous peridotitic source produced a wide spectrum of magma compositions, which mimic a mixing line between two components: ultrapotassic magma from partial melting of the metasomatic vein and a basaltic andesitic magma from partial melting of the surrounding peridotite. 相似文献
There are serious concerns that ocean acidification will combine with the effects of global warming to cause major shifts in marine ecosystems, but there is a lack of field data on the combined ecological effects of these changes due to the difficulty of creating large‐scale, long‐term exposures to elevated CO2 and temperature. Here we report the first coastal transplant experiment designed to investigate the effects of naturally acidified seawater on the rates of net calcification and dissolution of the branched calcitic bryozoan Myriapora truncata (Pallas, 1766). Colonies were transplanted to normal (pH 8.1), high (mean pH 7.66, minimum value 7.33) and extremely high CO2 conditions (mean pH 7.43, minimum value 6.83) at gas vents off Ischia Island (Tyrrhenian Sea, Italy). The net calcification rates of live colonies and the dissolution rates of dead colonies were estimated by weighing after 45 days (May–June 2008) and after 128 days (July–October) to examine the hypothesis that high CO2 levels affect bryozoan growth and survival differently during moderate and warm water conditions. In the first observation period, seawater temperatures ranged from 19 to 24 °C; dead M. truncata colonies dissolved at high CO2 levels (pH 7.66), whereas live specimens maintained the same net calcification rate as those growing at normal pH. In extremely high CO2 conditions (mean pH 7.43), the live bryozoans calcified significantly less than those at normal pH. Therefore, established colonies of M. truncata seem well able to withstand the levels of ocean acidification predicted in the next 200 years, possibly because the soft tissues protect the skeleton from an external decrease in pH. However, during the second period of observation a prolonged period of high seawater temperatures (25–28 °C) halted calcification both in controls and at high CO2, and all transplants died when high temperatures were combined with extremely high CO2 levels. Clearly, attempts to predict the future response of organisms to ocean acidification need to consider the effects of concurrent changes such as the Mediterranean trend for increased summer temperatures in surface waters. Although M. truncata was resilient to short‐term exposure to high levels of ocean acidification at normal temperatures, our field transplants showed that its ability to calcify at higher temperatures was compromised, adding it to the growing list of species now potentially threatened by global warming. 相似文献
A model problem of the flow under an air-cushion vessel is studied. Two different numerical techniques are used to determine the solution of the free-surface elevation and the wave resistance for a range of Froude number, Reynolds number, value of the pressure applied in the cushion, and depth of the water. The first numerical technique uses a velocity potential that satisfies linearized free-surface boundary conditions, whereas the second employs a finite-volume method to find a solution that satisfies the fully nonlinear free-surface boundary conditions. The results clearly show that for high Froude number and practical values of the cushion pressure, the linear-theory solution is in excellent agreement with the more exact nonlinear prediction. For lower Froude number the solution becomes unsteady, and the disagreement between the two methods is larger. 相似文献