黄土洞室掘进深度与围岩位移变化规律研究     

时卫民  王鹏  赵尚毅 《岩土工程技术》2020,(2):70-75

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。  相似文献   

Trends and risk evolution of drought disasters in Tibet Region,China     

Chen  Qiong  Liu  Fenggui  Chen  Ruijie  Zhao  Zhilong  Zhang  Yili  Cui  Peng  Zheng  Du 《地理学报(英文版)》2019,29(11):1859-1875

Journal of Geographical Sciences - The risk posed by natural disasters can be largely reflected by hazard and vulnerability. The analysis of long-term hazard series can reveal the mechanisms by...  相似文献   

基于波形特征的露天钼矿微震事件的识别分析——以卓资山钼矿为例     

赵艳红  包金哲  王树波  翟浩  魏建民  杨智升  张晖  赵铁锁  苏日亚  王磊  王鑫  贾昕晔  刘芳 《震灾防御技术》2019,14(3):662-676

基于前人研究成果以及现场的实测结果，采用卓资山露天钼矿微震监测项目产出资料，提取了5类微震事件的波形特征和时频特征。波形特征显示:微地震的振幅、辐射均匀性和频率变化特征表明微地震是由于岩层受到单力偶和剪切力作用破裂而产生；爆破具有P波初动方向向上、S波不易识别的特点，包含“初震段、主震段、尾波段”三段变化形态；小型边坡滑坡波事件属楔体滑坡，是由多个“加速—缓冲—终止”构成，波形是由包络线呈“V”字形的多组脉冲波列组成；机械开采震动事件具有自振能量不变、脉冲幅度相差很大、持续时间间隔不确定的特点；运输车辆波形振幅具有形态“弱—强—弱”、等频率、包络线呈多段纺锤形的特征。时频空间分布可以分为相对独立、界限分明的两类:一类包含微地震、爆破、机械开采、小型边坡滑坡事件，另一类只包含车辆运输事件。  相似文献   

Cyclical one-way continental rupture-drift in the Tethyan evolution: Subduction-driven plate tectonics     

Wan  Bo  Wu  Fuyuan  Chen  Ling  Zhao  Liang  Liang  Xiaofeng  Xiao  Wenjiao  Zhu  Rixiang 《中国科学:地球科学(英文版)》2019,62(12):2005-2016

Numerous continents have rifted and drifted away from Gondwana to repeatedly open ocean basins over the past-500 millionyears.These Gondwana-derived continents drifted towards and collided with components of the Eurasian continent to successively close the preexisting oceans between the two.Plate tectonics satisfactorily describes the continental drift from Gondwana to Eurasia but does not define the geodynamic mechanism of continuously rifting to collisions of continents in the Tethy an Realm.After reappraisal of geological records of the rift,collision and subduction initiation from the surface and various geophysical observations from depth,we propose that Eurasia-directed subducting oceanic slabs would have driven Tethyan system in the Phanerozoic.The Eurasia-directed subduction would have dragged the passive Gondwana margin to rift and drift northwards,giving birth to new oceans since the Paleozoic.The closure of preexisting oceans between the Gondwana-derived continents and Eurasia led to continental collisions,which would have induced the initiation of oceanic subduction in the Tethyan Realm.Multiple episodic switches between collision-subduction-rift repeatedly led to the separation of continental fragments from Gondwana and dragged them to drift towards Eurasia.The final disappearance of Neo-Tethy s would have induced collision of the Gondwana-derived continents with the Eurasian continent,giving rise to the Cenozoic Alpine-Zagros-Himalayan collisional system.Therefore,the Eurasia-directed oceanic subduction would have acted as a 'one-way train' that successively transferred the ruptured Gondwana continental fragments in the south,into the terminal in the north.In this regard,the engine of this "Tethyan one-way train" is the negative buoyancy of subducting oceanic slabs.  相似文献   

埋深对恐龙化石的影响效果研究          下载免费PDF全文

陈诚  贾超  张尚坤  杜圣贤  罗文强  田京祥 《山东国土资源》2019,35(5)

已发现的恐龙化石大多数埋藏在不同深度的地层中,不同埋深化石所受风化破坏程度不尽相同。为深入研究恐龙化石的风化机理,探究恐龙化石的保护措施和方法,重点分析埋深产生的侧向压力对恐龙化石强度和破坏特性的影响。通过有限差分软件FLAC3D进行数值模拟,揭示埋深因素对恐龙化石保存的影响程度。试验结果表明:围岩对恐龙化石施加的侧向压力是影响恐龙化石变形和强度特性的一个重要因素。在弹性变形阶段,恐龙化石的初始强度、峰值强度随侧向压力的增大而不断增大。当应力超过了恐龙化石极限强度后进入塑性变形,其初始强度、峰值强度逐渐减小,最终达到残余强度。  相似文献   

Imaging the rupture process of the 10 January 2018 MW7.5 Swan island,Honduras earthquake*          下载免费PDF全文

Chuang Cheng  Dun Wang 《地震科学（英文版）》2020,33(4):194-200

The 10 January 2018 M_W7.5 Swan island, Honduras earthquake occurred on the Swan island fault, which is a transform plate boundary between the North American and Caribbean plates. Here we back-project the rupture process of the earthquake using dense seismic stations in Alaska, and find that the earthquake ruptured at least three faults (three stages) for a duration of ~40 s. The rupture speed for the longest fault (stage 3) is as fast as 5 km/s, which is much faster than the local shear wave velocity of ~4 km/s. Supershear rupture was incidentally observed on long and straight strike-slip faults. This study shows a supershear rupture that occured on a strike-slip fault with moderate length, implying that supershear rupture might commonly occur on large strike-slip earthquakes. The common occurrence of supershear rupture on strike-slip earthquakes will challenge present understanding of crack physics, as well as strong ground motion evaluation in earthquake engineering.  相似文献   

Fingerprinting hydrothermal fluids in porphyry Cu deposits using K and Mg isotopes     

Li  Weiqiang  Zhao  Shugao  Wang  Xiaomin  Li  Shilei  Wang  Guoguang  Yang  Tao  Jin  Zhangdong 《中国科学:地球科学(英文版)》2020,63(1):108-120

In this study, we performed an integrated investigation of K and Mg isotopes in hydrothermally altered rocks from the giant Dexing porphyry Cu deposit in China. Both the altered porphyry intrusion and the surrounding wall rocks exhibit large variations in K and Mg isotope compositions, with δ41K values ranging between-1.02‰ and 0.38‰, and δ26Mg values ranging between-0.49‰ and 0.32‰. The δ41K and δ26Mg values of the majority of altered samples are higher than the isotopic baseline values for upper continental crust. We attribute the general increase in δ41 K and δ26Mg in altered rocks to hydrothermal alteration,which caused preferential incorporation of heavy K and Mg isotopes in alteration products, particularly phyllosilicates. However,a few altered samples show anomalously low δ41K and δ26Mg values. The δ41K and δ26Mg values do not correlate with K and Mg concentrations, or mineralogy of altered samples. The variable K-Mg isotope data likely reflect fluids of different physicalchemical properties, or different isotopic compositions. Based on the combined K-Mg isotope data, at least three groups of hydrothermal fluids are distinguished from the Dexing porphyry deposit. Therefore, K-Mg isotopes are potentially a novel tracer for fingerprinting fluids in complex hydrothermal systems.  相似文献   

An Amended Chemical Mass Balance Model for Source Apportionment of PM2.5 in Typical Chinese Eastern Coastal Cities     

Qiaoli Wang  Nana Cheng  Sujing Li  Minli Dong  Xiangqian Wang  Linlin Ge  Tianjiao Guo  Wei Li  Xiang Gao 《洁净——土壤、空气、水》2019,47(2)

  相似文献   

页岩储层叠前密度稳定反演方法          下载免费PDF全文

李金磊  尹成  刘晓晶  陈超  王明飞 《地球物理学报》2019,62(5):1861-1871

密度参数是页岩储层评价的重要敏感参数,但通常认为准确获得密度信息难度较大.本文探索提出了一种稳定的基于弹性阻抗的叠前密度反演方法,以提高优质页岩的识别精度.首先,基于不同的参数化弹性阻抗方程开展密度敏感性分析,优选了敏感性最高的Aki-Richards近似弹性阻抗方程作为反演方程.然后,在弹性阻抗方程线性化的基础上,假设反演方程系数矩阵的逆存在,将密度(取对数)表示为多个角度弹性阻抗(取对数)的加权和,通过井旁道弹性阻抗反演结果与测井数据的回归求取加权系数,避免了常规反演方法对大型系数矩阵的求逆计算,从而提高了密度反演的稳定性,同时由于利用测井资料作为匹配目标,密度反演的精度也得到了提高.模型试算和涪陵页岩气田的实际资料应用实践均表明了该方法能够有效地提高密度反演的精度与稳定性.  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献