辽东铀成矿带连山关地区韧性剪切带与铀成矿作用     

吴迪  刘永江  李伟民  常瑞虹 《岩石学报》2020,36(8):2571-2588

连山关地区位于华北克拉通北缘铀成矿省辽东铀成矿带，已知铀矿床（点）均发育在韧性剪切带附近。为了解韧性剪切带运动学、几何学构造变形机制及与铀矿的关系，本文以连山关岩体周缘韧性剪切带为研究对象，通过野外宏观调查和室内微观研究相结合的研究方法，探讨构造变形期次、韧性剪切带形成机理及其对铀成矿的控制作用。研究表明：连山关岩体周缘发育的韧性剪切带与近南北向挤压构造变形有关，其右行韧性剪切带应变类型为压扁应变，属于一般压缩-平面应变范围，Flinn指数K值在0.19~0.69之间，岩石类型属于S/SL型构造岩。研究区内铀矿体均为隐伏盲矿体，主要赋存于沿着连山关岩体和辽河群接触带右行剪切作用形成的背斜褶皱核部，和北东东向断裂关系密切。综合分析认为，连山关岩体南缘北西向韧性剪切带为一级控矿构造，是区内铀矿热液运移的通道，而剪切带边部的晚期北东东向断裂则是铀矿储存空间；铀源可能来自于太古宙古风化壳，并在大型韧性剪切活动（提供热液运移通道）和基性脉岩侵入（提供热源和还原剂）等综合因素作用下运移、富集成矿。  相似文献   

Did the “Autochthonous” European foreland of Corsica Island (France) experience Alpine subduction?     

Maria Di Rosa  Chiara Frassi  Michele Marroni  Francesca Meneghini  Luca Pandolfi 《地学学报》2020,32(1):34-43

Despite the important role played by the Sardinia‐Corsica block in the reconstruction of the Western Mediterranean geodynamics, the extent of involvement of the “Autochthonous” European margin exposed in Corsica (France) (i.e., Hercynian Corsica) in the Alpine orogeny remains uncertain. Stratigraphic and sedimentological studies in the post‐Variscan deposits on the Hercynian Corsica are scarce and even scarcer are the structural and metamorphic constraints. To face these uncertainties, we present new stratigraphic, structural and metamorphic data from the area of Razzo Bianco, Central Corsica, where a complete sequence belonging to the European continental margin is exposed. Field and structural investigations demonstrate that the sequence represents the easternmost edge of the downgoing European plate. Metamorphic studies on the Eocene deposits indicate that the margin was buried at depth up to blueschist facies conditions and, subsequently, it was progressively exhumed mainly through the activation of oblique top‐to‐the NW shear zones.  相似文献   

Gentrification in Porto: floating city users and internationally-driven urban change     

Luís Carvalho  José Fernandes  Jorge Pinto 《Urban geography》2019,40(4):565-572

The heightening scale of urban tourism and the fast-growing number of “floating” city users raise new challenges to understand contemporary urban change – namely for internationally open, heritage-rich medium-sized cities. Discussing the case of Porto at a time when the contested notion of gentrification infuses local politics, we highlight the transnational drivers of this process in Portugal´s second city. While acknowledging perils and benefits, we argue that more than simply leaving a footprint to be solved with taxation, internationally-driven gentrification may endanger city diversity and identity, raising implications for urban policy and for our understanding of local development as a whole.  相似文献   

Determination of subcatchment and watershed boundaries in a complex and highly urbanized landscape          下载免费PDF全文

Aimé Kayembe  Carl P. J. Mitchell 《水文研究》2018,32(18):2845-2855

Urban development significantly alters the landscape by introducing widespread impervious surfaces, which quickly convey surface run‐off to streams via stormwater sewer networks, resulting in “flashy” hydrological responses. Here, we present the inadequacies of using raster‐based digital elevation models and flow‐direction algorithms to delineate large and highly urbanized watersheds and propose an alternative approach that accounts for the influence of anthropogenically modified land cover. We use a semi‐automated approach that incorporates conventional drainage networks into overland flow paths and define the maximal run‐off contributing area. In this approach, stormwater pipes are clustered according to their slope attributes, which define flow direction. Land areas drained by each cluster and contributing (or exporting) flow to a topographically delineated catchment were determined. These land masses were subsequently added or removed from the catchment, modifying both the shape and the size. Our results in a highly urbanized Toronto, Canada, area watershed indicate a moderate net increase in the directly connected watershed area by 3% relative to a topographically forced method; however, differences across three smaller scale subcatchments are greater. Compared to topographic delineation, the directly connected watershed areas of both the upper and middle subcatchments decrease by 5% and 8%, respectively, whereas the lower subcatchment area increases by 15%. This is directly related to subsurface storm sewer pipes that cross topographic boundaries. When directly connected subcatchment area is plotted against total streamflow and flashiness indices using this method, the coefficients of variation are greater (0.93 to 0.97) compared to the use of digital elevation model‐derived subcatchment areas (0.78 to 0.85). The accurate identification of watershed and subcatchment boundaries should incorporate ancillary data such as stormwater sewer networks and retention basin drainage areas to reduce water budget errors in urban systems.  相似文献   

港湾中海啸流的模拟及其时空演变特征对输入条件不确定性的响应分析          下载免费PDF全文

王培涛  闪迪  侯京明  王岗  高义  任智源  范婷婷  王宗辰  王君成 《地球物理学报》2018,61(4):1325-1340

一直以来，海啸波特征作为表征海啸潜在破坏性的参数指标得到了广泛应用，特别是针对近场极端海啸事件造成的灾害来说，这种表征具有较好的适用性.然而总结分析历史海啸事件造成的损失发现：在远场近岸及港湾系统中，海啸诱导的强流却是造成损失的主要原因.陆架或港湾振荡导致海啸波幅快速升降诱发强流，可能促使港工设施受到威胁及损害，进而对海啸预警服务及海事应急管理提出了新的挑战.因此，全面理解与评估海啸在港湾中诱发的灾害特征，探索港湾中海啸流的数值模拟方法，发展针对港湾尺度的海啸预警服务指导产品尤为迫切.受限于海啸流验证数据的缺乏及准确模拟海啸流技术方法的诸多不确定性，大部分海啸数值模拟研究工作主要是针对水位特征的研究及验证，可能导致对港湾中海啸灾害危险性认识的曲解与低估.本研究基于非线性浅水方程，针对夏威夷群岛三个典型港湾建立了精细化海啸数值模型（空间分辨率达到10 m），并联合有限断层破裂模型计算分析了日本东北地震海啸在三个港湾及其邻近区域的海啸特征，波、流计算结果与实测结果吻合较好，精细化的海啸港湾模型模拟结果可信.模拟发现港湾中较小的波幅，同样可以产生强流.综合分析日本东北地震海啸波、流特征对输入条件不确定性的响应结果发现：港湾中海啸波-流能量的空间分布特征差异较大，这与港湾系统中海啸波的驻波特性相关；相比海啸波幅空间特征，海啸流特征具有更强的空间敏感性；海啸流时空分布特征对输入条件的不确定性响应比海啸波幅对这些不确定性的响应更强，海啸流的模拟与预报更有挑战性；不确定性对海啸流计算精度的影响会进一步传导放大港湾海啸流危险性的评估及对港工设施产生的应力作用的误差，合理的输入条件对海啸流的精确模拟至关重要.最后，希望通过本文的研究可以从海啸波-流特征角度更加全面认识近岸海啸灾害特征，拓展海啸预警服务的广度与深度，从而为灾害应急管理部门提供更加科学合理的辅助决策产品.  相似文献   

Chemical and mineralogical characterization of the Mineo (Sicily,Italy) pallasite: A unique sample          下载免费PDF全文

A. Zucchini  M. Petrelli  F. Frondini  C. M. Petrone  P. Sassi  A. Di Michele  S. Palmerini  O. Trippella  M. Busso 《Meteoritics & planetary science》2018,53(2):268-283

The Mineo pallasite is characterized here for the first time. The only 42 g still available worldwide is part of the collection of the Department of Physics and Geology, University of Perugia. A multianalytical approach was used, joining field-emission scanning electron microscopy, Raman analysis, X-ray powder diffraction, electron-probe microanalysis, and laser ablation inductively coupled plasma mass spectrometry. Results highlighted that (1) the Mineo pallasite belongs to the Main Group pallasites; (2) the silicate component is essentially olivine, with no pyroxene component; (3) the olivine chemical composition varies in terms of both iron and trace elements; (4) the metal phase is essentially kamacite with the taenite mainly found in the plessite structure; (5) phosphide phases are present as schreibersite and barringerite. The observed compositional variability in olivines as well as their occurrence as both angular and rounded crystals suggest that the Mineo pallasite could have been derived from a large impact of a differentiated parent body with a larger solid body. The resulting pallasite conglomerate consists of the compositionally different olivines, likely coming from different areas of the same differentiated parent body, and the residual molten Fe-Ni.  相似文献   

Tectonometamorphic evolution of the Atbashi high‐P units (Kyrgyz CAOB,Tien Shan): Implications for the closure of the Turkestan Ocean and continental subduction–exhumation of the South Kazakh continental margin          下载免费PDF全文

Chloé Loury  Yann Rolland  Stéphane Guillot  Pierre Lanari  Clément Ganino  Raphael Melis  Anthony Jourdon  Carole Petit  Olivier Beyssac  Sylvain Gallet  Patrick Monié 《Journal of Metamorphic Geology》2018,36(8):959-985

The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. ⁴⁰Ar/³⁹Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during T_max conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the T_max (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma.  相似文献   

基于小波变换的地震动时-频特性研究          下载免费PDF全文

董娣  袁美巧  王赞军 《地震工程学报》2020,42(3):653-664

对美国NGA,采用一维连续小波变换得到每条记录的小波功率谱。研究了任意时间处小波功率谱最大值所对应的主频率。结果表明:地震动主频率随时间的增大逐渐减小;竖向地震动分量的主频比水平向分量随时间减小更快。分别采用线性函数模型、指数函数模型和指数三角函数模型,分析了场地、震级和震中距对主频变化曲线的影响,拟合了主频率在不同场地条件、震级、震中距等情况下随时间的变化曲线,水平向和竖向的频率时变曲线整体上都是随时间递减的,且竖向衰减得更快些,大多数情况下竖向记录的高频成分比水平向记录的相应成分要多。  相似文献   

Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

全球气候变化下南海诸岛保护优先区识别分析   总被引：3，自引：1，他引：2  

左秀玲  苏奋振  张宇  吴文周  吴迪 《地理学报》2020,75(3):647-661

全球变化下,珊瑚礁保护区是保护生物多样性、增强珊瑚礁对气候变暖抵抗力的有效方式,而维持珊瑚礁弹性是其核心内容。针对珊瑚礁最具有威胁性的热压力因子,基于南海1982—2009年卫星观测海表面温度（SST）数据和CMIP5加拿大地球系统模式CanESM2模型预估的2006—2100年南海SST数据构建热压力强度模型,从维持珊瑚礁弹性的角度识别IPCC RCP 4.5和RCP 8.5情景下南海诸岛保护优先区。结果表明：RCP 4.5和RCP 8.5情景下13%左右的南海诸岛珊瑚礁识别为保护优先区。根据热压力强度与珊瑚抵抗力及避难所关系,西沙群岛七连屿和晋卿岛近年观测与未来预估的热压力强度均比较低,在保障其服务功能的基础上建议实施完全保护;东沙群岛东沙环礁和中沙环礁排洪滩近年观测急性热压力强度较高但未来预估热压力强度较低,建议实施50%禁止利用保护;中沙群岛黄岩岛近年观测和未来预估的急性热压力强度均比较低,建议实施50%多用途保护。南沙群岛有14%左右的珊瑚礁识别为保护优先区,根据其热压力强度可实施30%~100%禁止利用保护或30%~50%多用途保护。RCP 4.5和RCP 8.5情景下的南海诸岛保护优先区及保护对策,可为维持珊瑚礁生态弹性及应对全球气候变化提供重要的参考价值。  相似文献