长江中下游金属矿找矿前景与找矿方法   总被引：14，自引：3，他引：11       下载免费PDF全文

赵文津 《中国地质》2008,35(5):771-802

本文论述了长江中下游地区金属矿床的地质、地球物理和地球化学特点,提出今后深部找矿的主要对象是：找隐伏含矿岩体及有关的各类矿体,找岩体中的大型斑岩型矿床,找受岩体和五通砂岩联合控制的层状矿;讨论了地球物理和地球化学方法应用中要注意解决的几个主要问题,强调应发挥包括重力、磁法、激发极化法、电磁法、岩性探测仪及多种天然地震法和化探方法等综合方法的作用,并与地质矿床成矿规律研究密切结合;讨论了方法应用试验中要注意的几个问题。文章最后一部分是从本区大地构造的演化探讨了区域构造岩浆活动与成矿前景,认为这一地区是扬子板块与华北板块陆-陆碰撞挤压造山带及其前陆区,在岩石圈强烈挤压下形成地壳增厚和深部物质的挤出折返,使深部的高压和超高压变质岩层推到地壳浅部;深部生成的柯石英等高压超高压矿物及地幔熔融岩浆同时上侵;生成大量钙碱性岩浆并存储在中地壳部位,通过长期与中下地壳金属物质进行交换,形成矿液的集中优势,通过后期出现的张性断裂构造而进入地壳表层,再经过与围岩发生物理化学成矿作用后沉淀成矿。归纳出扬子板块与华北板块陆-陆碰撞造山带一种新的构造模式。  相似文献   

南沙海域万安盆地地质构造特征   总被引：1，自引：3，他引：1  

彭学超  陈玲 《海洋地质与第四纪地质》1995,15(2):35-48

利用在南沙海域万安盆地所采集的地震、重磁资料及钻井、地质资料，对该盆地的地震反向特征，沉积特征、区域地质、构造特征及构造发展史进行了的简要的论述，本文以该区Ｔｇ深度资料为基础，并利用ＣＣＯＰ年刊发表的新生代基底深度资料，初步圈定了万安盆地的边界，并对盆地二级构造单元进行了划分，将盆地划分为５坳３隆、坳隆相间的构造格局。  相似文献   

Fatigue Behavior of Plain Concrete Under Biaxial Compression: Experiments and Theoretical Model     

ZHU  Jin-song 《中国海洋工程》2003,17(4):617-630

The effects of different lateral confinement stress on the fatigue behavior of and cumulative damage to plain concrete are investigated experimentally. Eighty 100 mm x 100 mm x 100 mm specimens of ordinary strength concrete are tested under constant- or variable-amplitude fatigue loading and lateral confinement pressure in two orthogonal directions. A fatigue equation is developed by modifying the classical Aas-Jakobsen S-N equation for taking into account the effect of the confined stress on fatigue strength of plain concrete. The results of variable-amplitude fatigue tests indicate that the linear damage theory proposed by Palmgren and Miner is unreasonable in the biaxial stress state. A nonlinear cumulative damage model that could model the effects of the magnitude and sequence of variable-amplitude fatigue loading and lateral confinement pressure is proposed on the basis of the evolution laws of the residual strains in the longitudinal direction during fatigue tests. The residual fatigue life predic  相似文献   

关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议     

王清湘 《海洋工程》1995,(2)

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。  相似文献   

Comparison of Strain-rate Dependent Stress-Strain Behavior from Ko-consolidated Compression and Extension Tests on Natural Hong Kong Marine Deposits     

Jian-Hua Yin  Chun-Man Cheng 《Marine Georesources & Geotechnology》2006,24(2):119-147

This article presents results from a series of K_o-consolidated compression and extension triaxial tests on specimens from undisturbed samples of Hong Kong Marine Deposits (HKMD). To investigate the strain-rate effects, a total of seven K_o-consolidated triaxial tests were conducted including four compression tests and three extension tests. After K_o-consolidation, the triaxial test specimens were sheared at step-changed axial strain rates under three different confining pressures of 50 kPa, 150 kPa, and 400 kPa, respectively. The step-changed strain rates were applied in the following order: +2%/h, +0.2%/h, +20%/h, -2%/h (unloading) and +2%/h (reloading) for the four compression tests and -2%/h, -0.2%/h, -20%/h, +2%/h (unloading) and -2%/h (reloading) for the three extension tests. The results are reported and analyzed in the paper. The results show that the strain rate effects, the stress-strain characteristics, and the effective stress paths of the specimens for tests in a compression state are different from those for tests in an extension stage. One order of magnitude increase in axial strain rate causes an average 8.6% increase in undrained shear strength for compression tests and a 12.1% increase for extension tests. It is also found that the failure mode of the specimens in compression is different from that in extension. The stress-strain behavior of specimens shows strain-softening and a clear shear band in compression tests, but strain-hardening without any clear shear band in extension tests for the same absolute value of axial strain.  相似文献   

合浦珠母贝卵子电击脉冲参数的初步研究     

喻达辉  贾晓平  陈素文  李夏  朱嘉濠 《海洋科学》2005,29(8):15-19

运用电脉冲转基因仪对合浦珠母贝卵子进行电脉冲处理以优化电穿孔法转基因的电击参数。实验中调制百分比：100％；脉冲间隔：1．0s：电极距离：2mm；脉冲个数：5个，参数保持不变。用不同的电脉冲参数组合（脉冲电压100-400V、脉冲持续时间0．5～3．0ms、脉冲频率10～50kHz，共28个组合）对卵子电击，然后加入精子进行授精，统计各组受精率和孵化率，以受精率和孵化率达到50％以上为衡量指标。结果表明，合浦珠母贝卵子对低脉冲频率和高电压非常敏感，当频率低于20kHz或脉冲电压高于400V时对卵子损伤较大。脉冲持续时间对其影响不大，适应范围较宽。优化的转基因电击脉冲参教组合为：脉冲电压1.0kV／cm，脉冲持续时间20ms，脉冲频率50kHz，或者脉冲电压1．5kV／cm，脉冲持续时间1．5ms，脉冲频率50kHz。  相似文献   

Modelling the effect of swimbladder compression on the acoustic backscattering from herring at normal or near-normal dorsal incidences     

Gorska  Natalia; Ona  Egil 《ICES Journal of Marine Science》2003,60(6):1381-1391

  相似文献   

液体中光声信号吸收衰减的研究     

任新敏  戚诒让  许龙江  张德勇  周如城 《中国海洋大学学报(自然科学版)》1995,(4)

研究水的声吸收所引起的光声脉冲幅度的变化。脉冲声波由激光通过光击穿机制产生。文中给出了光声脉冲峰值声压与传播距离和声吸收系数之间的理论关系式。实验测量结果和理论曲线所描述的变化规律相符合。  相似文献   

基于时刻独立脉冲耦合神经网络的高空间分辨率摇感影像分割     

李利伟  马建文  欧阳赟  温奇 《遥感学报》2008,12(1):64-69

高空间分辨率遥感影像中地物目标内部光谱信息复杂性的增强,使得传统基于光谱特征值的数据处理方法效果不再显著,影像分割为解决这一问题提供了一种思路,成为当前高空间分辨率遥感影像处理的研究焦点.时刻独立脉冲耦合神经网络具有状态相近、空间相邻神经元相互耦合同步脉冲激发和区域之间神经元脉冲激发时刻独立两大特点,已被应用于非遥感影像分割中,并取得较好效果.本文结合高空间分辨率遥感影像特点,通过对网络参数进行实验和分析,提出一个基于时刻独立脉冲耦合神经网络的高空间分辨率遥感影像分割方法,并利用空间分辨率0.3m的航空影像进行了数据试验,将分割结果进行讨论并与现有时刻独立脉冲耦合神经网络方法和ISODATA方法分割结果进行对比分析.结果表明:时刻独立脉冲耦合神经网络在高空间分辨率遥感影像分割处理中具有很好的应用前景.  相似文献   

Jurassic Tectonics of North China: A Synthetic View   总被引：21，自引：1，他引：20  

ZHANG Yueqiao  DONG Shuwen  ZHAO Yue  ZHANG Tian 《《地质学报》英文版》2008,82(2):310-326

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken  相似文献