A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Analytical study of ground motion caused by seismic wave propagation across faulted rock masses          下载免费PDF全文

J.C. Li  N.N. Li  S.B. Chai  H.B. Li 《国际地质力学数值与分析法杂志》2018,42(1):95-109

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.  相似文献   

平衡剖面的制作流程及其地质意义   总被引：9，自引：0，他引：9  

王运所  刘亚洲  张孝义  张剑峰  尹哲 《地球科学与环境学报》2003,25(1):28-32

平衡剖面技术是地质思维和计算机技术的结晶,使对断层构造的研究提高到定量阶段,其依据是在垂直构造走向的剖面上,地层长度和面积(2D)或体积(3D)是均衡的。在此原理基础上利用数学手段对盆地的构造发育史进行正演和反演模拟,直观地再现地下构造的原始几何形态,迅速提供地震剖面的构造解释方案,并对解释结果进行检验(不平衡的剖面其解释一般有问题),为深刻认识构造发育史、分析油气运移及聚集规律提供依据,提高了工作效率。其结果也为盆地模拟、油藏模拟、定量计算构造伸缩量等地质研究打下了坚实的基础[1]。  相似文献   

RECENT TECTONIC DEFORMATION ANOMALY AND EARTHQUAKES IN GANSU-NINGXIA-QINGHAI AREA     

Wang Shuangxu  Zhang Xi  Zhang Sixin  Xue Fuping 《大地测量与地球动力学》2003,23(Z1)

1　IntroductionAccordingtogeologicalstructure ,theGansu Ningxia Qinghaiareabelongstothenortheastmar ginofQinghai Tibetblock .Thisareahasbeenpaidmuchattentionby geo specialistsinChinaandabroadbecauseofitssignificanttectonicmovement,itsintensiveseismicity ,anditsimportanceinearth quakehazardmitigation .IntheDevelopmentPro gramonNationalKeyBasicResearchesundertheProject“MechanismandPredictionofContinentalStrongEarthquakes”,themechanismsofcontinen talstrongearthquakesarestudied ,usinghypo…  相似文献   

An approximate method for evaluating the shear band thickness in saturated soils     

X. B. Lu  Wang Shuyun  Wang Yihua  Peng Cui 《国际地质力学数值与分析法杂志》2004,28(15):1533-1541

A formula for the thickness of a shear band formed in saturated soils under a simple shear or a combined stress state has been proposed. It is shown that the shear band thickness is dependent on the pore pressure properties of the material and the dilatancy rate, but is independent of the details of the combined stress state. This is in accordance with some separate experimental observations. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

青藏块体东北缘断层形变与中强地震   总被引：7，自引：4，他引：3  

陈兵  江在森  马文静  黎凯武  薛富平 《大地测量与地球动力学》2002,22(4):49-55

对祁连山－海原断裂带近期断层形变特征进行了初步研究，发现多场地，大范围的断层活动异常是中等强度地震发生的显著背景，并且往往与大陆地震活动的阶段性总体状况相呼应；区域形变存在明显的特征量，包括特征形态和特征时间，同一场地在不同地震前的异常特征具有重复性，但会受到背景差异显著的不同地震的影响，目前形变状况表明研究区仍具有发生中强地震的地壳运动背景。  相似文献   

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry     

Jacques Desrues  Gioacchino Viggiani 《国际地质力学数值与分析法杂志》2004,28(4):279-321

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd  相似文献   

长诏断裂带垂直运动与地震关系初探   总被引：5，自引：0，他引：5  

黄松风 《大地测量与地球动力学》2003,23(4):99-104

利用跨断层短水准资料分析了长诏断裂带断层活动特征，结果表明：长诏断裂带总体活动性质基本相同．分时段活动性质有所不同。断层各段多数以压性逆断为主，不同于历史地质考察结果。此外，长诏断裂带各断裂都具有分段活动特点。  相似文献   

南海北缘北东东向构造活动性研究     

任镇寰  任奔滔  罗振暖  陈益明  钟贻军 《大地测量与地球动力学》1996,(2)

从地形地貌特征、重磁地球物理场、深部构造与断裂构造以及地震活动、震源机制等多方面论述北东东向构造是南海北缘的主要活动构造。对于长期以来认为新华夏系北东向构造是该区主要活动构造的观点来说，这是一种新的学术思想。  相似文献