共查询到20条相似文献，搜索用时 62 毫秒
1.
基于一套环流-潮汐耦合模型的模拟结果,本文探究并比较了2015—2016年的三种黑潮形态下,吕宋海峡全日内潮以及全日非相干内潮生成与传播的空间分布特征。结果表明,当黑潮以流套形态流经吕宋海峡时,全日内潮非相干性最强,具体表现为全日非相干内潮能量生成最大,全日内潮的传播速度变化率最大。由于传播速度的变化会改变全日内潮的位相,进而会影响全日内潮的非相干性,导致在吕宋海峡内全日内潮的非相干性最强。本研究结果对理解黑潮背景动力过程下吕宋海峡内潮的时空变化有重要意义。 相似文献
2.
基于海洋模式HYCOM(Hybrid Coordinate Ocean Model),利用大小区嵌套技术,分别对全球海洋和西北太平洋进行了网格嵌套数值模拟,研究了吕宋海峡海域环流场的季节性变化。考虑全球海洋环流影响的西北太平洋模式,成功地刻画了黑潮的流结构及季节变化。吕宋海峡海洋环流流场在不同深度处差异较大,存在着明显的季节变化。黑潮入侵南海主要发生在500m深度以上,冬季最明显,夏秋两季不明显。在500m层常年存在一支南海暖流流入西北太平洋,在800m层南海暖流消失。一年四季黑潮主要通过吕宋海峡的南部和中部进入南海。1 000m层流场表明,黑潮主要通过吕宋海峡的中部入侵南海。在800~1 000m处主要是黑潮水流入南海。 相似文献
3.
混合坐标模式HYCOM模拟COADS强迫下的南海平均环流 总被引：1，自引：0，他引：1
采用混合坐标模式(HYCOM)模拟南海环流,同时利用海表温度卫星资料和吕宋海峡Sb-ADCP观测海流数据来评估模式结果.地形敏感性实验表明,吕宋海峡地形数据对模拟黑潮入侵方式影响较大,在地形误差较大的情况下,模拟的黑潮可能以反气旋流套方式入侵.和Pathfinder海表温度卫星资料比较,模式输出的月平均温度在海盆区域误差较小.ERA-15资料强迫所模拟的吕宋海峡上层环流和Sb-ADCP观测一致,而COADS结果低估了吕宋海峡的体积输送. 相似文献
4.
本文构造了一个考虑潮汐、中尺度涡和地形影响下的南海底部环流诊断模型。在该模型中,潮汐混合和涡致混合引起的垂直速率用一个类似的改进参数化方案来表示。该模型结果显示在南海深层吕宋海峡"深水瀑布"和斜压影响最大,潮汐作用和中尺度涡影响次之,风场的影响最小。斜压影响的整体效应与其他因素相反。潮汐混合与涡致混合具有明显的地形依赖性。潮汐混合主要集中在南海北部海盆地形较为陡峭的陆坡区和南海中部海山区,而涡致混合主要集中在海盆西边界区以及中部海山区。在不考虑吕宋海峡"深水瀑布"、潮汐和中尺度涡的情况下(对应吕宋海峡关闭),南海底部环流为反气旋式环流。考虑吕宋海峡"深水瀑布"后,南海底层环流为气旋式环流,而潮汐混合和涡致混合起到加强整个气旋式环流强度的作用。此外,该模型还给出了南海底部环流量级大小与地形坡度之间的密切关系,即地形坡度较大的地方,其流速也大。这对于现场观测有着一定的参考意义。最后,本文用尺度分析的方法从理论上分析了该模型的适用性,证实了该模型具有一定的可靠性。 相似文献
5.
黑潮入侵优化对南海北部中尺度涡旋模拟的影响 总被引：1，自引：1，他引：0
基于高分辨率海洋环流模式,通过比较吕宋海峡处地形优化后的黑潮入侵形态和强度不同的试验,我们研究了黑潮入侵优化后对南海中尺度涡模拟的影响。我们发现黑潮入侵的减弱导致了涡旋活动的减弱,这使得模式结果与观测结果更为相近。在这种情况下,模式模拟的吕宋海峡西部及北部陆坡区域的涡动动能明显减弱。模式涡动动能的减弱与模式反气旋式涡数量的减少和气旋式涡强度的减弱有关。涡动动能收支的分析进一步表明,黑潮入侵的优化将通过改变水平速度切变和温跃层斜率来改变涡动动能,而这两个参数分别与正压和斜压不稳定性有关。前者在模式涡动动能减弱中起着更为重要的作用,而黑潮入侵导致的涡动动能的水平输送对吕宋海峡西部区域的能量收支同样起着重要的作用。 相似文献
6.
吕宋海峡是连接南海与西太平洋的唯一深水通道,也是调节南海环流及其热力特征的关键海洋通道。在大尺度西边界流、中尺度涡、热带气旋等众多因子的共同影响下,吕宋海峡输运表现出显著的多时间尺度变率特征,其中热带气旋是影响该海域强烈且频繁的天气过程之一,解析吕宋海峡输运与热带气旋之间的动力联系也是近年来南海海洋研究的热点之一。本文主要从吕宋海峡附近热带气旋活动特征及其对黑潮、吕宋海峡附近环流结构、吕宋海峡输运的影响等方面回顾最新的研究进展。最后,本文认为接下来应当在热带气旋调制吕宋海峡输运的机制,以及对吕宋海峡输运年际变化的贡献等方面加强研究。 相似文献
7.
基于南海观测得到的垂向混合率修改KPP垂向混合方案,利用大洋环流模式HYCOM首次模拟得到了吕宋海峡深层环流的空间分布特征,并通过3个不同水平分辨率的实验(1/6(°)、1/12(°)、1/24(°))讨论水平分辨率对模拟吕宋海峡深层环流空间结构的影响。模拟结果表明:(1)1/6(°)水平分辨率过于粗糙,无法分辨巴士海峡和台东海峡地形特征,无法得到吕宋海峡深层环流的空间分布特征;(2)1/12(°)的水平分辨率可以很好的分辨吕宋海峡和台东海峡的地形特征,模拟得到吕宋海峡深层环流的空间分布和流场特征;(3)1/24(°)水平分辨率的模拟结果表明,更高的水平分辨率不会改变吕宋海峡深层环流的空间分布和主要出入口的垂向结构,只是会显示更细节的环流结构。1/12(°)和1/24(°)水平分辨率的模式结果都表明,西北太平洋深层水通过巴士海峡和台东海峡进入吕宋海沟,年平均流量分别为1.1和0.4Sv,然后沿吕宋海沟向南海方向流动,最后主要通过位于恒春海脊上的2个缺口进入南海,年平均流量分别为0.5和0.9Sv。 相似文献
8.
黑潮在吕宋海峡的形变及动力机制 总被引：6，自引：2，他引：6
根据１９９０年以来对吕宋海峡和中国南海（ＳＣＳ）北部的ＷＯＣＥ水文资料和其它海洋调查资料的分析，以及对同一海区的卫星遥测海表温度（ＳＳＴ）的资料处理，推断在吕宋海峡常年存在黑潮路径弯曲，西折进入ＳＣＳ并又流出ＳＣＳ的现象，作者将黑潮的这种变形称为“黑潮流套”。黑潮变形进入ＳＣＳ的位置在冬季位于海峡中部、南部附近，范围较大；在夏季略向北移，较集中于海峡中部，范围较小。作者认为，黑潮流套现象可用位涡守恒理论作定性的解释：当黑潮在吕宋海峡失去西边界支持后，其流轴以西贴近西边界的一部分流体，因具有较大的相对正涡度，会脱离黑潮主体在南海东北部形成反时针旋转或顺时针旋转的环流，而黑潮主体会以顺时针旋转的形式在海峡以西的海域出现。整个黑潮以弯曲、扩展的形式在海峡处产生形变，在海峡东侧出现反气旋涡旋的倾向。吕宋海峡黑潮流套及南海北部的诱生环流之流型，会因黑潮本身以及副热带环流整体的变化而变化，也与海峡的宽度有关。总之，吕宋海峡黑潮流套的形成是由当地特殊的地形条件和地转β效应这些内部机制决定的，它的常年存在有其必然性 相似文献
9.
北赤道流分叉点及南海北部环流的研究进展 总被引：6，自引：0，他引：6
介绍了北赤道流分叉点、南海北部环流的一些研究成果,并就黑潮对南海的影响所作的研究进行了回顾.北赤道流分叉点的位置对于北赤道流系水体疏运变化及在黑潮和MC之间水体、热量、盐度输运的分配中起着重要的作用.北赤道流分叉点位置约在14.6°N上,分叉点位置随深度增加而北移.分叉点有明显的季节变化和年际变化,在春、夏季向南移动,而在秋、冬季则向北移动.年际变化与ENSO现象相关紧密,在El Nio事件NEC分叉纬度处于最北端,在La Nio事件处于最南端.对于分叉点位置的定量化研究,仍然需要更多的观测结果进行研究.季风和黑潮是影响南海北部环流的两种主要因素.南海北部上层流场主要由广东沿岸流、黑潮入侵流套、东沙海流、南海暖流和吕宋海流组成.除海盆、次海盆尺度环流外,受季风、黑潮和地形等因素的影响,南海表现出多涡结构.通过近些年的卫星观测和数值模拟的结果,人们对南海中尺度涡的认识大大加深,但要想模拟出风应力形成涡的机制,还需要提高风场和模式的分辨率.由于观测资料的限制,对南海流场的垂直结构、以及春-秋季季风转相时期的流场结构等还研究得较少.吕宋海峡水交换是西太平洋对南海影响的主要途径.黑潮在吕宋海峡附近的形变一直是有争议的热点问题,目前对于黑潮入侵有3种观点:(1) 认为黑潮经过吕宋海峡形成流套结构,并分离出中尺度涡影响南海流场、水团结构;(2) 认为黑潮有一直接分支分离出来进入南海形成黑潮分支;(3) 认为吕宋海峡水交换不属于以上两种情况,西太平洋对南海的水团输送另有机制.北赤道流分叉点在对黑潮的水体、热量、盐度输运的分配中起着重要的作用,黑潮对南海北部环流的影响可能与NEC的分叉点位置有关,但目前对NEC的分叉点位置与南海北部环流相关性的研究甚少.最后提出了对未来加强该方面研究的一些展望. 相似文献
10.
吕宋海峡以东即北太平洋热带地区常年存在着大量的涡旋,这些涡旋在向西运动的过程中遇到吕宋海峡黑潮后是否会穿越黑潮进入南海值得研究。文章用数值模式来模拟吕宋海峡的黑潮以及吕宋海峡以东的众多涡旋,结果表明没有一个涡旋可以穿越吕宋海峡进入南海。在此基础上引入了一个理想台风风场,通过风应力旋度的形式驱动出强劲的气旋式和反气旋式涡旋,这两个涡旋分别添加在源区黑潮附近,也是在源区黑潮流量最小的8月。以往研究表明,黑潮流量小而涡旋强劲的时候涡旋容易穿越吕宋海峡进入南海,但由何种原因产生的涡旋可以穿越吕宋海峡难以确定;而文章的数值计算结果表明,即使在黑潮较弱的夏季8月,由风应力旋度产生的中尺度涡,无论是气旋式还是反气旋式,都受到了吕宋海峡的阻挡而难以穿越。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
13.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
14.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
15.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
16.
17.
18.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
19.
Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans 总被引：1，自引：0，他引：1
A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level. 相似文献
20.
Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations. 相似文献