共查询到20条相似文献，搜索用时 393 毫秒
1.
通过时雅鲁藏布大峡谷流域地貌形成响应时间域的定量估算,大峡谷与上游河道特征的时比,以及大峡谷入口处河湖阶地的沉积分析和定年研究．结合构造研究的新进展和数值地貌分析成果,系统论证了雅鲁藏布大峡谷的形成。研究结果表明,现今的雅鲁藏布大峡谷与大峡谷上游的河道在大峡谷形成之前分属不同的河流体系,大约在距今30kaBP前后,原属于帕隆藏布江水系支流的扎曲一直白河段因溯源侵蚀,袭夺了位于现今直白河段上游的古雅鲁藏布江水系,使得此前向南经南伊沟（纳伊普曲）流出高原的古雅鲁藏布江与帕隆藏布江合二为一,雅鲁藏布大峡谷得以贯通和强烈的侵蚀下切,形成现今著名的大峡谷和大拐弯式样的流域结构。 相似文献
2.
帕隆藏布江特大型泥石流的成灾模式及防治对策——以扎木镇-古乡段为例 总被引：1，自引：0，他引：1
文章通过对雅鲁藏布江的Ⅰ级支流—帕隆藏布江扎木镇-古乡段辫状水系地貌的研究,认为其与两岸支谷发育的泥石流群有关。通过对位于该河段下游的古乡沟和上游的地质弄巴泥石流特征的重点剖析,发现了特大型泥石流发育的2个重要特征,即支谷上游冰蚀围谷中赋存大量巨厚古今冰碛物和支谷中游峡谷段大型崩塌滑坡坝溃决。提出了特大型泥石流的成灾模式,并以该成灾模式解释了2000年易贡巨型滑坡堵江事件。最后,提出了基于上述成灾模式的帕隆藏布江流域特大型泥石流灾害防治的原则和方法。 相似文献
3.
通过数字高程模型(DEM)的空间分析技术,系统提取研究区洮河水系流域盆地典型的河流地貌参数,并利用活动造山带地区发育的基岩河道纵向剖面形态等典型参数,分析洮河水系流域盆地地貌发育不对称性特征及洮河在岷县流向的急剧转变成因。研究表明洮河上游南岸水系较北岸水系形状指数高、流域面积大、水系发育更成熟,下游东岸河流河长较短、流域面积小、形状指数低于西岸,西岸水系更发育,且上游流域要比下游河道平缓,水系的相对落差更低,发育更成熟,表明上游河道形成时间早于下游河道。临潭—宕昌断裂带的逆冲隆升作用是造成洮河上、下游水系形态差异的主要原因。岷县东侧山脉的快速隆起致使古洮河被截断,之后被东北侧河流溯源侵蚀,切穿西秦岭北缘构造带,进行河流袭夺,从而形成了现今的洮河。最后探讨了对青藏高原东北端晚新生代以来的构造响应。 相似文献
4.
5.
对涪江上游流域盆地地貌特征及成因进行研究,有助于揭示青藏高原东缘晚新生代以来新构造活动的差异性。本文以ArcGIS水文分析模块为技术平台,在研究区域内系统提取涪江上游流域盆地地表水系网络和涪江干流东西两侧36个亚流域盆地,并对亚流域盆地面积、周长、水系总长度、水系分支比、流域盆地演化阶段进行统计分析,结果表明,涪江干流河道东西两侧典型地貌参数存在显著差异。通过对该区域构造运动、岩石抗侵蚀能力、降水特征等几方面因素与河流下切过程相关性的分析可知,降水条件和岩性差异并不是涪江上游亚流域盆地不对称发育的主要影响因素,该区域断裂活动导致的地形不对称分布格局及岩层破碎程度的差异是涪江上游流域地貌差异演化的主控因素。另外,涪江上游干流展布呈现出两个特征:涪江干流河道因雪山断裂、北川-映秀断裂、彭县-灌县断裂的右旋(或左旋)走滑作用而沿断裂发生同步弯曲;涪江干流河道在北川-映秀断裂北侧由西北-东南流向转变为近正南流向,究其原因,主要是龙门山断裂带3条主干断裂的区域性右旋走滑活动驱动该区域物质产生相应右旋运动,从而使长期处于断层右旋作用控制之下的涪江干流河道发生转向。 相似文献
6.
雅鲁藏布江大拐弯地区河流形态特征及其意义 总被引：2，自引：0，他引：2
为探讨雅鲁藏布江大拐弯地区区域隆升的特点,通过DEM(数字高程模型)和遥感影像提取雅鲁藏布江干流和帕隆藏布江的形态特征,引入Hack剖面、SL参数和Amos河宽理论模型进行分析。雅鲁藏布江干流在大渡卡以下河段的Hack剖面表现为上凸形态,SL参数升高、河流宽度减小,在藏布巴东瀑布-雅鲁藏布江大拐弯顶端段,SL参数达到最大值,河流宽度达到最小值;大拐弯顶端以下河段,SL参数减小,河流渐宽。帕隆藏布江古乡以下河段SL参数梯级增高,河流宽度总体收窄,大拐弯顶端附近达到最大值。综合2条河流的地貌特征和区域地质与地理背景,认为雅鲁藏布江大拐弯地区的隆升具有不均一性,雅鲁藏布江在大渡卡附近开始进入快速隆升区段,隆升最强烈的区段位于藏布巴东瀑布-大拐弯顶端段,大拐弯顶端之后雅鲁藏布江逐渐远离隆升中心区。 相似文献
7.
在雅鲁藏布江中游山南宽谷段发现了一套湖相沉积地层,形成时代为晚更新世晚期,为冰川阻江形成的堰塞湖沉积物。野外调查发现该套湖相地层在桑日县、乃东县、扎囊县等地均有出露,综合研究认为其为一个东起桑日县扎巴村、西至贡嘎机场附近的大型古堰塞湖泊,面积达700多km2。通过区域调查,该堰塞湖形成的湖相沉积地层在贡嘎县杰德秀镇出露最厚,厚10余m,主要由粉砂质黏土层、细砂层组成,水平纹层等湖相沉积特征明显,本研究称之为杰德秀古湖。杰德秀剖面顶部14C日历校正年龄为15 680～15 105 aBP,属于末次盛冰期。对比林芝古湖、格嘎古湖和松宗古湖等雅鲁藏布江下游堰塞湖的沉积物特征和形成时间,认为杰德秀古湖发育于末次盛冰期。沉积相特征和湖水库容量模拟分析表明,该堰塞湖发育时期,雅鲁藏布江中游山南宽谷段并未完全封闭,为一个湖水面积巨大的过水湖或吞吐湖,类似于现代过水水库。桑日县扎巴村雅鲁藏布江河谷两岸分布有冰碛物,其与雅鲁藏布江中游山南宽谷段的湖相沉积地层的时空关系指示杰德秀古湖与冰川阻塞河道有关,杰德秀古湖是由于冰川阻江形成的冰川堰塞湖。研究结果也进一步说明,雅鲁藏布江现代水系形成以前,其中游不存在面积巨大的众多古湖泊,雅鲁藏布江也不是溯源侵蚀疏干多个古湖泊而形成的,在古湖泊形成之前,雅鲁藏布江已经贯通。雅鲁藏布江流域内的古湖泊是由于气候变化、新构造运动或地震活动等原因造成河道堵塞形成的堰塞湖。 相似文献
8.
均衡状态时的基岩河道纵剖面表现为平滑形态,然而自然界的河道纵剖面常因地球各种内外动力作用的影响而呈现出以裂点为特征的不均衡状态,因此不均衡的河道剖面及裂点的特征可以用于指示外界环境的扰动。位于青藏高原东缘造山带的岷江上游流域水系普遍呈现不均衡的特征,且广泛发育有裂点。文章基于数字高程模型,提取裂点空间分布特征,通过裂点成因分析后发现,这些裂点的形成受到岩性、冰川作用、构造等因素的影响：因岩性形成的裂点主要位于花岗岩与其他地层的交界线上;而高海拔裂点主要受到冰川作用的控制,位于地形起伏度较低的区域;流域内低海拔区域成层分布的坡断型裂点可能主要因多期次区域构造隆升而形成;岷江上游下段流域的阶梯状垂阶型裂点则主要因地震滑坡形成。这一结果增进了对岷江流域的河流地貌发育及其影响因素的理解。此外,研究结果也说明在对河道纵剖面分析时有必要更多考虑到滑坡及冰川等因素对现代河道纵剖面产生的重要影响,为进一步理解造山带地貌演化及控制因素提供了参考视角。 相似文献
9.
晚新生代以来发育岷山构造带内部的岷江水系流域盆地,无论是流域盆地内的新生代沉积记录,还是其流域地貌所呈现的典型特征,都深刻指示了青藏高原东缘地区的新构造活动。文章基于数字高程模型(DEM)数据空间分析技术,利用最新获取的高精度SRTM-DEM数据,系统提取了岷江水系中上游流域汇水盆地以及67个亚流域盆地的典型地貌参数,如流域面积、河流长度、分支比等。通过对流域地貌参数以及纵向河道高程剖面等的统计分析,认为岷江水系东西两侧具有截然不同的地貌特征,东侧流域盆地主要表现为面积小、河流长度短、分支比低以及河流梯度大等特征。由于岷江水系东西两侧地层岩性的对称发育以及整个岷江流域盆地对气候因素具有同一的响应特征,所以亚流域盆地典型参数特征指示了岷江水系两侧晚新生代构造活动的差异性,反映并印证了岷江断裂东西两侧晚新生代以来的不均衡抬升。晚新生代以来岷山构造带的快速隆起以及龙门山构造带内部差异活动是造成岷江水系东侧各支流发育程度低,东西两侧亚流域差异地貌特征形成的主要原因。 相似文献
10.
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
20.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献