共查询到20条相似文献，搜索用时 31 毫秒
1.
A numerical and experimental study on the sloshing behaviours of cylindrical and rectangular liquid tanks is addressed. A three‐dimensional boundary element method for space with the second‐order Taylor series expansion in time is established to simulate the sloshing phenomenon and its related physical quantities inside a liquid tank subjected to horizontal harmonic oscillations or recorded earthquake excitations. The small‐scale model experiments are carried out to verify some results of numerical methods in this study. The comparisons between numerical and experimental results show that the numerical method is reliable for both kinds of ground excitations. Finally, the water wave and the base shear force of a rectangular tank due to harmonic excitation are also presented at different frequencies. A huge cylindrical water tank subjected to a recorded earthquake excitation is used for application and discussion. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
2.
In this research, an analytical model is developed to estimate the hydrodynamic damping ratio of liquid sloshing for wall
bounded baffles using the velocity potential formulation and linear wave theory. Here, an analytical solution approach and
experimental investigations are conducted for describing the hydrodynamic damping which is provided by vertical and horizontal
baffles in partially filled rectangular liquid tanks. In order to evaluate the accuracy of the analytical solution which is
developed in present work, a series of experiments are carried out with a rectangular liquid tank excited by harmonic oscillation.
The parametric study is conducted on the damping efficiencies of both vertical and horizontal baffles with various dimensions
and locations. According to the results of the present investigations, the hydrodynamic damping is significantly affected
by the size and location of baffles. Furthermore, the validity of the developed analytical approach as well as the effectiveness
of various baffle configurations are discussed. Finally, a simple approach is proposed for estimating the damping ratios of
the baffles during earthquake motions. 相似文献
3.
为了研究高阶晃动振型对LNG储罐地震响应的影响,考虑高阶晃动振型,建立LNG储罐的简化力学模型,推导LNG储罐的运动控制方程,给出了LNG储罐的基底剪力、倾覆弯矩和储罐内液体晃动波高的表达式。以某16×104 m3 LNG储罐为例,采用大型通用有限元分析软件ADINA System对其进行有限元模型分析,验证其修正模型的有效性,结果表明:高阶晃动振型对基底剪力和倾覆弯矩几乎无影响,但对晃动波高影响显著,尤其是长周期地震动作用下,并且考虑高阶晃动振型的晃动波高存在延时效应。提出的简化力学模型修正公式与有限元分析结果吻合较好,可以准确地预测LNG储罐地震响应。 相似文献
4.
Smoothed particle hydrodynamics(SPH) is a mesh-free adaptive Lagrangian particle method with attractive features for dealing with the free surface flow.This paper applies the SPH method to simulate the large-amplitude lateral sloshing both with and without a floating body,and the vertical parametrically-excited sloshing in a two-dimensional tank.The numerical results show that the SPH approach has an obvious advantage over conventional mesh-based methods in handling nonlinear sloshing problems such as violent fluid-solid interaction,and flow separation and wave-breaking on the free fluid surface.The SPH method provides a new alternative and an effective way to solve these special strong nonlinear sloshing problems. 相似文献
5.
A variationally coupled BEM–FEM is developed which can be used to analyse dynamic response, including free-surface sloshing motion, of 3-D rectangular liquid storage tanks subjected to horizontal ground excitation. The tank structure is modelled by the finite element method and the fluid region by the indirect boundary element method. By minimizing a single Lagrange function defined for the entire system, the governing equation with symmetric coefficient matrices is obtained. To verify the newly developed method, the analysis results are compared with the shaking-table test data of a 3-D rectangular tank model and with the solutions by the direct BEM–FEM. Analytical studies are conducted on the dynamic behaviour of 3-D rectangular tanks using the method developed. In particular, the characteristics of the sloshing response, the effect of the rigidity of adjacent walls on the dynamic response of the tanks and the orthogonal effects are investigated. © 1998 John Wiley & Sons, Ltd. 相似文献
6.
A series of scalar and vector intensity measures is examined to determine their suitability within the seismic risk assessment of liquid storage tanks. Using a surrogate modelling approach on a squat tank that is examined under both anchored and unanchored support conditions, incremental dynamic analysis is adopted to generate the distributions of response parameters conditioned on each of the candidate intensity measures. Efficiency and sufficiency metrics are used in order to perform the intensity measure evaluation for individual failure modes, while a comparison in terms of mean annual frequency of exceedance is performed with respect to a damage state that is mutually governed by the impulsive and convective modes of the tank. The results reveal combinations of spectral acceleration ordinates as adequate predictors, among which the average spectral acceleration is singled out as the optimal solution. The sole exception is found for the sloshing‐controlled modes of failure, where mainly the convective period spectral acceleration is deemed adequate to represent the associated response due to their underlying linear relationship. A computationally efficient method in terms of site hazard analysis is finally proposed to serve in place of the vector‐valued intensity measures, providing a good match for the unanchored tank considered and a more conservative one for the corresponding anchored system. 相似文献
7.
中国核电厂抗震设计规范推荐采用的Housner模型不适用于复杂形状核电储液结构的流固耦合分析。对于AP1000和CAP1400核电站屏蔽厂房顶部非能动安全壳冷却系统重力水箱(简称PCS水箱),基于圆柱形水箱的Housner等效质量-弹簧模型,通过引入水箱体积修正参数,提出PCS水箱的三维等效质量-弹簧模型。采用有限元软件ADINA建立水箱结构流固耦合整体有限元模型以进行模态分析,计算分析PCS水箱和对应环形水箱在不同尺寸和液体深度条件下的液体晃动自振特性。对比整体有限元模型与三维等效质量-弹簧模型计算结果发现,提出的PCS水箱三维等效质量-弹簧模型能给出其内液体晃动各阶振型的液动压力合理估计值,适用于具有复杂形状的PCS水箱液动压力分析。本文的等效模型方法可推广应用于其他复杂形状水箱的液动压力分析。 相似文献
8.
This paper reports on the results of a study conducted on tanks partially filled with water, representing tuned liquid dampers (TLD), subjected to both 1D and 2D horizontal excitations. The sloshing response of the water in the tank is characterized by the free surface motion, the resulting base shear force, and evaluation of the energy dissipated by the sloshing water. A 1D non‐linear flow model capable of simulating a TLD equipped with damping screens is employed to model a 2D TLD. Application of this particular model requires the assumption that the response is decoupled and can be treated as the summation of two independent 1D TLDs. Results from the non‐linear flow model are compared with the 2D experimental shake table test results leading to a validation of the decoupled response assumption. This attractive decoupled response property allows square and rectangular tanks to be used as 2D TLDs, which can simultaneously reduce the dynamic response of a structure in two perpendicular modes of vibration. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
9.
In this study, the hydrodynamic damping effects of Upper Mounted Baffles (UMB) used in the real scale liquid tanks are numerically investigated. In this regard, the paper follows three main purposes. First, the accuracy of the analytical model developed by the author is examined for full scale applications. In this regard, the tanks equipped by UMB with various dimensions and locations are numerically analyzed in free vibration mode. Then, the numerical results are compared with an analytical solution results, and the validity of the analytical formulation for using in real applications is discussed. Second, the seismic efficiency of UMB is considered, and the reduction of the sloshing wave height due to the presence of the UMB is examined under several earthquake excitations. Finally, a seismic design procedure is proposed to evaluate the effect of UMB on the suppression of sloshing in a liquid tank, and its predictions are compared with the results of numerical analysis. 相似文献
10.
渡槽中流体非线性晃动的边界元模拟 总被引：20，自引：0，他引：20
应用边界元法分析了流体非线性晃动及其对渡槽的作用效应,将所得结果与线性解析结果作了比较．数值计算表明：流体以较大幅度晃动时,线性模型结果与非线性边界元结果有较大偏差,计算有限幅流体晃动反应宜采用非线性模型． 相似文献
11.
An innovative method of analysis was developed to simulate the non-linear seismic finite-amplitude liquid sloshing in two-dimensional containers. In view of the irregular and time-varying liquid surface, the method employed a curvilinear mesh system to transform the non-linear sloshing problem from the physical domain with an irregular free-surface boundary into a computational domain in which rectangular grids can be analysed by the finite difference method. Non-linearities associated with both the unknown location of the free surface and the high-order differential terms were considered. The Crank–Nicolson time marching scheme was employed and the resulting finite difference algorithm is unconditionally stable and very lightly damped with respect to the temporal co-ordinate. In order to minimize numerical instability caused by the computational dispersion in spatially discretized surface wave, a second-order dissipation term was added to the system to filter out the spurious high-frequency waves. Sloshing effects and structural response were measured in terms of sloshing amplitude, base shear and overturning moment generated by the hydrodynamic pressure of the liquid exerted on the container walls. Simulation results of liquid sloshing induced by earthquake and harmonic base excitations were compared with those of the linear wave theory and the limitations of the latter in assessing the response of seismically excited liquids were addressed. 相似文献
12.
A hybrid analytical and FEM is proposed to investigate the nonlinear sloshing in a floating‐roofed oil storage tank under long‐period seismic ground motion. The tank is composed of a rigid cylindrical wall and a flat bottom, whereas the floating roof is treated as an elastic plate undergoing large deflection. The contained liquid is assumed to be inviscid and incompressible, and the flow is assumed to be irrotational. The method of analysis is based on representation of the liquid motion by superposing the analytical modes that satisfy the Laplace equation and the rigid wall and bottom boundary conditions. The FEM is then applied to solve the remaining kinematic and dynamic boundary conditions at the moving liquid surface coupled with the nonlinear equation of motion of the floating roof. This requires only the discretization of the liquid surface and the floating roof into finite elements, thus leading to a computationally efficient and accurate method compared with full numerical analysis. As numerical examples to illustrate the applicability of the proposed method, two oil storage tanks with single‐deck type floating roofs damaged during the 2003 Tokachioki earthquake are studied. It is shown that the nonlinear oscillation modes with the circumferential wave numbers 0, 2 and 3 caused by the finite liquid surface elevation as well as the membrane action due to large deflection of the deck produce excessively large stresses in the pontoon, which may cause the catastrophic failure of pontoon followed by the submergence of the roof. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
13.
A study of the response to horizontal ground shaking of a rigid cylindrical tank containing an inviscid liquid with a continuous vertical variation in density is presented. In addition to the free vibrational sloshing characteristics of the liquid, the responses examined include the vertical displacements at the free surface, and the impulsive and convective components of the hydrodynamic wall pressures and associated tank forces. The equations of motion for the system are formulated for an arbitrary variation in liquid density but the solutions presented are for a density that increases exponentially from top to bottom. Comprehensive numerical data are included which elucidate the underlying response mechanisms and the effects and relative importance of the various parameters involved. The solution for the continuous density variation considered herein is also compared with a previously reported solution in which the liquid was modelled as a multi-layered, discrete system. 相似文献
14.
A tuned liquid damper (TLD), which consists of rigid tanks partially filled by liquid, is a type of passive control device relying upon liquid sloshing forces or moments to change the dynamical properties and to dissipate vibrational energy of a structure. An analytical non-linear model is proposed for a TLD using rectangular tanks filled with shallow liquid under pitching vibration, utilizing a shallow water wave theory. The model includes the linear damping of the sloshing liquid, which is an important parameter in the study of a TLD as it affects the efficiency of the TLD. Shaking table experiments were conducted for verification; good agreement between the analytical simulations and the experimental results was observed in a small excitation amplitude range. The simulations of TLD-structure interaction by using the proposed model show that the TLD can efficiently suppress resonant pitching vibration of a structure. It is also found that the effectiveness of a TLD for suppressing the pitching vibration depends not only on the mass of liquid in the TLD but also on the configuration of the liquid as well as upon the position where the TLD is located. If the configuration of the liquid, i.e. the liquid depth and the TLD tank size, is designed suitably, the TLD can have a large suppressing moment and can be very effective even with a small mass of liquid. 相似文献
15.
The sloshing action of layered liquids in rigid cylindrical and long rectangular tanks is investigated, considering both their free vibrational characteristics and their response to a horizontal component of base shaking. Special attention is given to the maximum surface displacement induced by the base motion. The analysis is formulated for systems with N superimposed layers of different thicknesses and densities, and is illustrated by a numerical example. In addition, comprehensive numerical data are presented for two-layered and some three-layered systems which elucidate the underlying response mechanisms and the effects and relative importance of the numerous parameters involved. It is shown that for each horizontal natural mode of vibration, there are N distinct vertical modes, the frequencies of which are lower than the natural frequency of a homogeneous liquid of the same total depth. It is further shown that the maximum surface sloshing displacement of the base-excited layered system is typically larger than that of the corresponding homogeneous system, and that the results for the long rectangular and cylindrical tanks are quite similar. 相似文献
16.
A new sloshing analysis method for rectangular tank systems with a submerged structure are proposed by using the velocity potential and the linear water wave theory. The velocity potential functions are obtained by decomposing the surface wave into a wall-induced wave, reflected and transmitted waves, and a scattered wave. A simplified method using a response spectrum for zero damping is also proposed. The results of the simplified method are in good agreement with those of the analytical method. The sloshing response of the fluid-structure system is found to be very sensitive to the characteristics of the ground motion and the configuration of the system. Under typical earthquakes, the submerged structure shows a tendency to decrease sloshing amplitude, hydrodynamic pressure, and base shear, while it shows a tendency to increase the overturning moment. For the ground excitation dominated by low-frequency contents, the sloshing response increases significantly and the contribution of the higher sloshing modes increases. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
17.
Numerical simulations of a single‐degree‐of‐freedom (SDOF) structure, rigidly supporting a tuned liquid damper (TLD) and subjected to both real and artificially generated earthquake ground motions, show that a properly designed TLD can significantly reduce the structure's response to these motions. The TLD is a rigid, rectangular tank with shallow water in it. Its fundamental linear sloshing frequency is tuned to the structure's natural frequency. The TLD is more effective in reducing structural response as the ground excitation level increases. This is because it then dissipates more energy due to sloshing and wave breaking. A larger water‐depth to tank‐length ratio than previous studies suggested, which still falls within the constraint of shallow water theory, is shown to be more suitable for excitation levels expected in strong earthquake motions. A larger water‐mass to structure‐mass ratio is shown to be required for a TLD to remain equally effective as structural damping increases. Furthermore, the reduction in response is seen to be fairly insensitive to the bandwidth of the ground motion but is dependent on the structure's natural frequency relative to the significant ground frequencies. Finally, a practical approach is suggested for the design of a TLD to control earthquake response. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
18.
水平地震激励下储罐液体晃动与提离分析 总被引：3，自引：2，他引：1
在考虑地基与储罐相互作用的情况下,采用有限元法对储罐在水平地震荷载作用下的液面晃动及储罐提离反应进行了分析。结果表明:罐内液体的晃动是长周期运动,其周期受地震动影响。无论是小体积罐还是大体积罐,在一定的地震烈度下均可以发生提离,而且储罐发生提离的时刻大多数是在地震动的峰值过后的一段时间内。大体积的储罐的提离明显小于小体积的罐。底板提离区域为月牙形。 相似文献
19.
为研究考虑桩土相互作用的储液罐的动力响应及长周期地震波对储液晃动、储罐提离的影响,根据量纲分析法设计了桩-土-储罐模型进行了振动台试验。试验中采用4条基岩波、4条地表波进行振动台试验。试验显示基岩波与地表波输入时,体系变化规律基本一致,其结果表明:土体地表加速度被放大,且输入加速度峰值增加,地表加速度放大倍数减小;一般地震波时,随着输入加速度峰值的增加,储液晃动波高大致呈线性增加。长周期地震波下则为非线性增加,且晃动波较大。此外,液体产生的晃动波高与储罐类型相关。细高型储罐产生的波高稍大;储罐提离高度随着输入加速度峰值的增加呈非线性增长。长周期地震波激励下,储罐提离高度小于一般地震波时的提离高度。细高型储罐在长短周期地震波激励下,提离高度较为接近,而一般储罐在两种地震波激励下,提离高度相差较大。细高型储罐提离高度大于一般储罐的提离高度。建议在储罐设计时考虑长周期地震波的影响。 相似文献
20.
A common effective method to reduce the seismic response of liquid storage tanks is to isolate them at base using base-isolation systems. It has been observed that in many earthquakes, the foregoing systems significantly affect on the whole system response reduction. However, in exceptional cases of excitation by long-period shaking, the base-isolation systems could have adverse effects. Such earthquakes could cause tank damage due to excessive liquid sloshing. Therefore, the numerical seismic response of liquid storage tanks isolated by bilinear hysteretic bearing elements is investigated under long-period ground motions in this research. For this purpose, finite shell elements for the tank structure and boundary elements for the liquid region are employed. Subsequently, fluid–structure equations of motion are coupled with governing equation of base-isolation system, to represent the whole system behavior. The governing equations of motion of the whole system are solved by an iterative and step-by-step algorithm to evaluate the response of the whole system to the horizontal component of three ground motions. The variations of seismic shear forces, liquid sloshing heights, and tank wall radial displacements are plotted under various system parameters such as the tank geometry aspect ratio (height to radius), and the flexibility of the isolation system, to critically examine the effects of various system parameters on the effectiveness of the base-isolation systems against long-period ground motions. From these analyses, it may be concluded that with the installation of this type of base-isolation system in liquid tanks, the dynamic response of tanks during seismic ground motions can be considerably reduced. Moreover, in the special case of long-period ground motions, the seismic response of base-isolated tanks may be controlled by the isolation system only at particular conditions of slender and broad tanks. For the case of medium tanks, remarkable attentions would be required to be devoted to the design of base-isolation systems expected to experience long-period ground motions. 相似文献