首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Stepped heating and crushing experiments have been used to investigate the noble gas and halogen degassing behaviour of quartz in detail. Samples with diverse character were selected from the Eloise and Osborne, Iron Oxide Copper Gold (IOCG) ore deposits, and the Railway Fault, 13 km south of the Mt Isa Mine, in the Proterozoic Mt Isa Inlier of northeast Australia. Quartz has been shown to have a bimodal degassing profile. The first degassing mode at temperatures of <700 °C is caused by thermally induced mechanical decrepitation of fluid inclusions. Changes in the Br/Cl, I/Cl, Ar/Cl and 40Ar/36Ar composition of gas released at different temperatures up to 700 °C can be related to the decrepitation of different types of fluid inclusion observed by microthermometry. These variations with temperature permit deconvolution of the complex fluid inclusion assemblages associated with the IOCG samples; the ultra high salinity, multi solid (MS) and liquid-vapour-daughter (LVD) fluid inclusions, with a predominantly primary origin, decrepitate at higher temperatures than lower salinity liquid-vapour (LV) and monophase (M) fluid inclusions that have a predominantly secondary origin. Three of the IOCG samples have primary MS and LVD fluid inclusions characterized by molar Br/Cl values of between 0.25 × 10−3 and 0.66 × 10−3, I/Cl between 0.37 × 10−6 and 5.0 × 10−6, 40Ar/36Ar values of <1000 and low 36Ar concentrations of 0.7-1.0 × 10−6 cm3 cm−3H2O. These low values are most easily explained by the involvement of halite dissolution water in IOCG genesis. One of the IOCG samples has Br/Cl of 1.3-2.0 × 10−3 and I/Cl of 10 × 10−6, similar to juvenile magmatic fluids in Phanerozoic Porphyry Copper Deposits. This sample also has a higher 36Ar concentration of 3.5 × 10−6 cm3 cm−3H2O and a slightly elevated 40Ar/36Ar of 2236. Step heating reveals limited and non-systematic variation within the more homogenous population of LV fluid inclusions from the Railway Fault. The samples have mean values of 8.1 × 10−3 for Br/Cl; 9.4-12 × 10−6 for I/Cl; <2000 for 40Ar/36Ar; and 4.7-4.8 × 10−6 cm3 cm−3H2O for 36Ar concentration. The Br/Cl values are similar to those previously reported for basinal brines present in silicic alteration at the Mt Isa Mine and the additional data can be explained by interaction of such a bittern brine with fine grained sedimentary rocks in the sub-surface. The second mode of quartz degassing occurs between 1200 and 1450 °C and releases a greater volume of gas than the first degassing mode. Several lines of evidence, including microscope observations, indicate that the gas released at high temperature is also from the fluid inclusion reservoir. However, its release may be triggered by a metastable phase transition of quartz (∼1200 °C) and caution is required in interpretation of the fluid compositions obtained at these temperatures. The data provide an improved understanding of fluid inclusion decrepitation behaviour that is different to that obtained in lower temperatures experiments designed by other workers to investigate H-isotope fractionation.  相似文献   

2.
Graphite in deep crustal enderbitic (orthopyroxene + garnet + plagioclase + quartz) granulites (740°C, 8.9 kb) of Nilgiri hills, southern India were investigated for their spectroscopic and isotopic characteristics. Four types of graphite crystals were identified. The first type (GrI), which is interstitial to other mineral grains, can be grouped into two subtypes, GrIA and GrIB. GrIA is either irregular in shape or deformed, and rough textured with average δ13C values of −12.7 ± 0.4‰ (n = 3). A later generation of interstitial graphite (GrIB) shows polygonal crystal shapes and highly reflecting smooth surface features. These graphite grains are more common and have δ13C values of −11.9 ± 0.3‰ (n = 14). Both subtypes show well-defined Raman shifts suggesting a highly crystalline nature. Cores of interstitial graphite grains have, on average, lower δ13C values by ∼0.5‰ compared to that of the rim. The second type of graphite (GrII) occurs as solid inclusions in silicate minerals, commonly forming regular hexagonal crystals with a slightly disordered structure. The third type of graphite (GrIII) is associated with solid inclusions (up to 100 μm) that have decrepitation halos of numerous small (<15 μm) satellite fluid inclusions of pure CO2 with varying density (1.105 to 0.75 g/cm3). The fourth type of graphite (GrIV) is found as daughter crystals within primary type CO2-fluid inclusions in garnet and quartz. These fluid inclusions have a range of densities (1.05 to 0.90 g/cm3), but in general are significantly less dense than graphite-free primary, pure CO2 fluid inclusions (1.12 g/cm3). Raman spectral characteristics of graphite inside fluid inclusions suggest graphite crystallization at low temperature (∼ 500°C). The precipitation of graphite probably occurred during the isobaric cooling of CO2-rich peak metamorphic fluid as a result of oxyexsolution of oxide phases. The oxyexsolution process is evidenced by the magnetite-ilmenite granular exsolution textures and the systematic presence of numerous micron-sized rutile and other oxide inclusions in association with fluid inclusions within garnet, plagioclase, and quartz.The carbon isotope compositions of coexisting CO2 (in fluid inclusions) and graphite show a fractionation (α2CO−gr) of ∼6‰ in garnet, consistent with the existing theoretical estimates of α2CO−gr at 800°C. A subsequent generation of CO2 inclusions trapped in matrix quartz and quartz segregation have higher δ13C values, −4‰ and −2.9‰ respectively. Graphite in quartz segregations also has higher δ13C values (−9.8‰) than those in enderbite (−12.7‰). Micro-graphite crystals included in garnet, quartz (enderbite), and quartz (segregation) have average δ13C values of −11.1, −10.4, and −8.7‰ respectively, indicating progressive enrichment in 13C with a decrease in temperature of recrystallization of respective minerals. This progressive enrichment is also observed in carbon isotope compositions of fluid inclusion CO2, suggesting isotopic equilibrium during graphite precipitation from CO2 fluids. Thus, the carbon isotope record preserved in these rocks by the interstitial graphite, CO2 fluid in enderbite, graphite microcrystals, graphite in quartz segregation, and CO2 fluid in quartz segregation, suggests a temperature-controlled isotopic evolution. This evolution is in accordance with a closed system Rayleigh-type graphite precipitation process which progressively enriched residual CO2 in 13C.  相似文献   

3.
Quartzitic pelites forms a part of Higher Himalayan Crystalline of higher geotectonic zone in Garhwal Himalaya. Quartzitic pelites (locally known as Pandukeshwar Quartzite) in Garhwal Himalaya is sandwiched between high grade metamorphic rocks of Central Crystallines and Badrinath Formation. Fluid inclusion studies are carried out on the detrital, and recrystallized quartz grains of quartzitic pelites to know about the fluid phases present during recrystallization processes at the time of maximum depth of burial. The quartzitic pelite (Pandukeshwar Quartzite) essentially consists of recrystallised quartz with accessory minerals like mica and feldspar. Fluid microthermometry study reveals the presence of three types of fluids: (i) high-salinity brine, (ii) CO2-H2O and (iii) H2O-NaCl. These fluids were trapped during the development of grain and recrystallization processes. The high saline brine inclusions and CO2-H2O fluid with the density of 0.90 to 0.97 gm/cm3 are remnants of provenance area. CO2 density in detrital quartz grains characterise the protolith of the sandstone as granite or metamorphic rock. The H2O-NaCl fluids involved in the recrystallization processes at temperature-pressure of 430-350°C; 4.8 to 0.5 Kbars as constrained by fluid isochores of CO2-H2O and H2O-NaCl inclusions and bulging and subgrain development during recrystallization processes. The re-equilibration of the primary fluid due to elevated internal and confining pressure is evident from features like ‘C’ shaped cavities, stretching of the inclusions, their migration and decrepitation clusters. The observed inclusion morphology revealed that the rocks were exhumed along an isothermal decompression path.  相似文献   

4.
The Semna gold deposit is one of several vein-type gold occurrences in the central Eastern Desert of Egypt, where gold-bearing quartz veins are confined to shear zones close to the boundaries of small granitoid stocks. The Semna gold deposit is related to a series of sub-parallel quartz veins along steeply dipping WNW-trending shear zones, which cut through tectonized metagabbro and granodiorite rocks. The orebodies exhibit a complex structure of massive and brecciated quartz consistent with a change of the paleostress field from tensional to simple shear regimes along the pre-existing fault segments. Textural, structural and mineralogical evidence, including open space structures, quartz stockwork and alteration assemblages, constrain on vein development during an active fault system. The ore mineral assemblage includes pyrite, chalcopyrite, subordinate arsenopyrite, galena, sphalerite and gold. Hydrothermal chlorite, carbonate, pyrite, chalcopyrite and kaolinite are dominant in the altered metaggabro; whereas, quartz, sericite, pyrite, kaolinite and alunite characterize the granodiorite rocks in the alteration zones. Mixtures of alunite, vuggy silica and disseminated sulfides occupy the interstitial open spaces, common at fracture intersections. Partial recrystallization has rendered the brecciation and open space textures suggesting that the auriferous quartz veins were formed at moderately shallow depths in the transition zone between mesothermal and epithermal veins.Petrographic and microthermometric studies aided recognition of CO2-rich, H2O-rich and mixed H2O–CO2 fluid inclusions in the gold-bearing quartz veins. The H2O–CO2 inclusions are dominant over the other two types and are characterized by variable vapor: liquid ratios. These inclusions are interpreted as products of partial mixing of two immiscible carbonic and aqueous fluids. The generally light δ34S of pyrite and chalcopyrite may suggest a magmatic source of sulfur. Spread in the final homogenization temperatures and bulk inclusion densities are likely due to trapping under pressure fluctuation through repeated fracture opening and sealing. Conditions of gold deposition are estimated on basis of the fluid inclusions and sulfur isotope data as 226–267 °C and 350–1100 bar, under conditions transitional between mesothermal and epithermal systems.The Semna gold deposit can be attributed to interplay of protracted volcanic activity (Dokhan Volcanics?), fluid mixing, wallrock sulfidation and a structural setting favoring gold deposition. Gold was transported as Au-bisulfide complexes under weak acid conditions concomitant with quartz–sericite–pyrite alteration, and precipitated through a decrease in gold solubility due to fluid cooling, mixing with meteoric waters and variations in pH and fO2.  相似文献   

5.
Preferential water loss from synthetic fluid inclusions   总被引：4，自引：0，他引：4  
A fundamental question in most fluid inclusion studies is whether inclusions behave as compositionally closed systems after trapping, and, thus, represent samples of the fluid phase(s) present in the system at the time of their formation. This question was addressed in high-temperature laboratory experiments with synthetic fluid inclusions in quartz and it was found that at 825°C the inclusions exhibited open-system behavior with respect to water. Synthetic salt-water fluid inclusions in quartz were reequilibrated for 12 hours to 35 days at 825° C in a dry argon atmosphere under 1.5 kbar confining pressure. These conditions created initial internal overpressures (P int> P conf) of 1.5–4 kbar in the inclusions and differential water fugacities in the same sense i.e., fH2OfH2O. After 108 hours of reequilibration, preferential water loss had resulted in salinity increases as large as 22 wt% salt (e.g., from 57 to 79 wt% NaCl, as determined from measured temperatures of salt dissolution). Also, following reequilibration, a strong inverse correlation between salinity and inclusion volume was observed, and this trend became more pronounced with increasing reequilibration time. These observations, together with a lack of evidence for selective H2O removal via hydration reactions, suggest that water loss occurred by a diffusion-related mechanism. Fluxes of 4x10-11 g/cm2-s and diffusion coefficients on the order of 10-9 cm2/s are calculated for water loss from the inclusions. The calculated H2O diffusion coefficient is consistent with the determination of Blacic (1981) derived from hydrolytic weakening experiments, but is much larger than the value obtained by Giletti and Yund (1984) for volume diffusion of oxygen in isotope exchange experiments. These observations suggest that the mechanism of water loss from our synthetic fluid inclusions may have been pipe diffusion along dislocations, subgrain boundaries or other structural defects rather than bulk volume diffusion.The results of this study are relevant to the interpretation of fluid inclusions in quartz from several natural high-temperature environments where water fugacities of included and ambient fluids are known to have evolved along separate paths over geologic time.  相似文献   

6.
Acadian (Late Silurian to Early Devonian) metamorphism in the Central Maine Terrane (CMT) in central Massachusetts is characterized by an early low-P, high-T (Buchan-type) metamorphism followed by thickening at high temperature (>650d? C) and then by cooling to 100-200d? C below peak recorded temperatures before eventual unroofing. Mineralogical and textural evidence for this path includes sillimanite pseudomorphs after early andalusite, abundant cordierite in pelitic lithologies, replacement of low-P cordierite-bearing assemblages by high-P garnet-bearing assemblages, and recrystallization of mylonites associated with late shear zones to form lower-T and higher-P assemblages. Peak conditions in the highest grade rocks were 685-780d? C and 5-6 kbar; the cooling path passed through 550d? C at about 6.5 kbar. The well-constrained P-T path documented from geological and mineralogical evidence for the CMT offers an unusual opportunity to examine characteristics of fluid inclusions that have experienced a long-lived metamorphic event spanning a broad range of P-T conditions. Fluid inclusion data from the CMT document a range of fluid compositions (CO2-rich, mixed CO2-N2-rich, N2-rich and H2O-rich) and densities during metamorphism. Densities of CO2 fluid inclusions range from 0.20 to 1.03 g cm-3. Medium-density CO2 fluid inclusions are contained in quartz inclusions within garnets in partial melt leucosomes, and in quartz grains within migmatites. Fluid inclusions within the quartz inclusions indicate trapping conditions of 650-700d? C at pressures below 5 kbar. Other CO2 fluid inclusions from matrix quartz yield isochores which pass through 700d? C and 5.2 kbar. The highest density inclusions associated with rocks containing the late high-P assemblages have isochores which pass below the estimated P-T conditions for recrystallization of the mylonite. Fluid inclusion evidence suggests an early low-P heating event, followed by thickening at high temperature, and then by nearly isobaric cooling to about 500d? C with later decompression. This interpretation is also consistent with previously published petrological models and supports an anticlockwise P-T path for the CMT of south-central Massachusetts.  相似文献   

7.
Fluid inclusions and mineral associations were studied in late-stage charnockitic granites from the Bjerkreim-Sokndal lopolith (Rogaland anorthosite province). Because the magmatic and tectonic evolutions of this complex appear to be relatively simple, these rocks are a suitable case for investigation of the origin and evolution of granulitic fluids. Fluid inclusions, primarily contained in quartz, can be divided into four types: carbonic (type I), N2-bearing (type II), CO2+H2O (type III) and aqueous inclusions (type IV). For each type, the role of leakage and fluid mixing are discussed from microthermometric and Raman spectrometric data. The most striking features of CO2-rich inclusions (the predominant fluid) is the presence of graphite in numerous, trail-bound inclusions (Ib) and its absence in a few isolated, very dense (d=1.16), pure CO2 inclusions (Ia) and in the late carbonic inclusions (Ic). Fluid chronology and mineral assemblages suggest that carbonic Ia inclusions represent the first fluid (pure CO2) trapped at or close to magmatic conditions (T=780–830° C, fO2=10-15 atm and P=7.4±1 kb), outside the graphite stability field. In contrast, type Ib inclusions enclosed graphite particles from a channelized fluid during retrograde rock evolution (P=3–4 kb and T=600° C). Decreases in T-fO2 could explain a progressive evolution from a CO2-rich fluid to an H2O-rich fluid in a closed C–O–H system. However, graphite destabilization observed in type Ic inclusions implies some late introduction of external water during the last stage of retrogression. The main results of this study are the following: (1) a carbonic fluid was present in an early stage of rock evolution (probably in the charnockitic magma) and (2) this granulite occurrence offers good evidence of crossing the graphite stability field during post-magmatic evolution.  相似文献   

8.
Raman spectroscopy is a powerful method for the determination of CO2 densities in fluid inclusions, especially for those with small size and/or low fluid density. The relationship between CO2 Fermi diad split (Δ, cm−1) and CO2 density (ρ, g/cm3) has been documented by several previous studies. However, significant discrepancies exist among these studies mainly because of inconsistent calibration procedures and lack of measurements for CO2 fluids having densities between 0.21 and 0.75 g/cm3, where liquid and vapor phases coexist near room temperature.In this study, a high-pressure optical cell and fused silica capillary capsules were used to prepare pure CO2 samples with densities between 0.0472 and 1.0060 g/cm3. The measured CO2 Fermi diad splits were calibrated with two well established Raman bands of benzonitrile at 1192.6 and 1598.9 cm−1. The relationship between the CO2 Fermi diad split and density can be represented by: ρ = 47513.64243 − 1374.824414 × Δ + 13.25586152 × Δ2 − 0.04258891551 × Δ3 (r2 = 0.99835, σ = 0.0253 g/cm3), and this relationship was tested by synthetic fluid inclusions and natural CO2-rich fluid inclusions. The effects of temperature and the presence of H2O and CH4 on this relationship were also examined.  相似文献   

9.
Fluid inclusions were studied in samples from the Ashanti, Konongo-Southern Cross, Prestea, Abosso/Damang and Ayanfuri gold deposits in the Ashanti Belt, Ghana. Primary fluid inclusions in quartz from mineralised veins of the Ashanti, Prestea, Konongo-Southern Cross, and Abosso/Damang deposits contain almost exclusively volatile species. The primary setting of the gaseous (i.e. the fluid components CO2, CH4 and N2) fluid inclusions in clusters and intragranular trails suggests that they represent the mineralising fluids. Microthermometric and Raman spectroscopic analyses of the inclusions revealed a CO2 dominated fluid with variable contents of N2 and traces of CH4. Water content of most inclusions is below the detection limits of the respective methods used. Aqueous inclusions are rare in all samples with the exception of those from the granite-hosted Ayanfuri mineralisation. Here inclusions associated with the gold mineralisation contain a low salinity (<6 eq.wt.% NaCl) aqueous solution with variable quantities of CO2. Microthermometric investigations revealed densities of the gaseous inclusions of 0.65 to 1.06 g/cm3 at Ashanti, 0.85 to 0.98 g/cm3 at Prestea, up to 1.02 g/cm3 at Konongo-Southern Cross, and 0.8 to 1.0 g/cm3 at Abosso/Damang. The fluid inclusion data are used to outline the PT ranges of gold mineralisation of the respective gold deposits. The high density gaseous inclusions found in the auriferous quartz at Ashanti and Prestea imply rather high pressure trapping conditions of up to 5.4 kbar. In contrast, mineralisation at Ayanfuri and Abosso/Damang is inferred to have occurred at lower pressures of only up to 2.2 kbar. Mesothermal gold mineralisation is generally regarded to have formed from fluids characterized by H2O > CO2 and low salinity ( ±  6 eq.wt.%NaCl). However, fluid inclusions in quartz from the gold mineralisations in the Ashanti belt point to distinctly different fluid compositions. Specifically, the predominance of CO2 and CO2 >> H2O have to be emphasized. Fluid systems with this unique bulk composition were apparently active over more than 200␣km along strike of the Ashanti belt. Fluids rich in CO2 may present a hitherto unrecognised new category of ore-forming fluids. Received: 30 May 1996 / Accepted: 8 October 1996  相似文献   

10.
Infrared spectra of C-O-H micro-inclusions were collected from a micro-inclusion bearing diamond during step-heating and freezing experiments to examine fluid speciation as a function of pressure and temperature. The inclusions contain H2O, CO2, carbonate, apatite, quartz and mica, which together represent the oxidising remnant mantle fluid composition after diamond crystallisation. The internal pressure of the inclusions, measured from calibrated shifts of the quartz peaks, increases from 1.3 GPa at ambient temperature, to approximately 4-5 GPa at 737 °C, close to the conditions of crystallisation of the host diamond in the mantle.  相似文献   

11.
《Ore Geology Reviews》2009,35(4):580-596
The Semna gold deposit is one of several vein-type gold occurrences in the central Eastern Desert of Egypt, where gold-bearing quartz veins are confined to shear zones close to the boundaries of small granitoid stocks. The Semna gold deposit is related to a series of sub-parallel quartz veins along steeply dipping WNW-trending shear zones, which cut through tectonized metagabbro and granodiorite rocks. The orebodies exhibit a complex structure of massive and brecciated quartz consistent with a change of the paleostress field from tensional to simple shear regimes along the pre-existing fault segments. Textural, structural and mineralogical evidence, including open space structures, quartz stockwork and alteration assemblages, constrain on vein development during an active fault system. The ore mineral assemblage includes pyrite, chalcopyrite, subordinate arsenopyrite, galena, sphalerite and gold. Hydrothermal chlorite, carbonate, pyrite, chalcopyrite and kaolinite are dominant in the altered metaggabro; whereas, quartz, sericite, pyrite, kaolinite and alunite characterize the granodiorite rocks in the alteration zones. Mixtures of alunite, vuggy silica and disseminated sulfides occupy the interstitial open spaces, common at fracture intersections. Partial recrystallization has rendered the brecciation and open space textures suggesting that the auriferous quartz veins were formed at moderately shallow depths in the transition zone between mesothermal and epithermal veins.Petrographic and microthermometric studies aided recognition of CO2-rich, H2O-rich and mixed H2O–CO2 fluid inclusions in the gold-bearing quartz veins. The H2O–CO2 inclusions are dominant over the other two types and are characterized by variable vapor: liquid ratios. These inclusions are interpreted as products of partial mixing of two immiscible carbonic and aqueous fluids. The generally light δ34S of pyrite and chalcopyrite may suggest a magmatic source of sulfur. Spread in the final homogenization temperatures and bulk inclusion densities are likely due to trapping under pressure fluctuation through repeated fracture opening and sealing. Conditions of gold deposition are estimated on basis of the fluid inclusions and sulfur isotope data as 226–267 °C and 350–1100 bar, under conditions transitional between mesothermal and epithermal systems.The Semna gold deposit can be attributed to interplay of protracted volcanic activity (Dokhan Volcanics?), fluid mixing, wallrock sulfidation and a structural setting favoring gold deposition. Gold was transported as Au-bisulfide complexes under weak acid conditions concomitant with quartz–sericite–pyrite alteration, and precipitated through a decrease in gold solubility due to fluid cooling, mixing with meteoric waters and variations in pH and fO2.  相似文献   

12.
The Wangfeng gold deposit is located in Western Tian Shan and the central section of the Central Asian Orogenic Belt (CAOB). The deposit is mainly hosted in Precambrian metamorphic rocks and Caledonian granites and is structurally controlled by the Shenglidaban ductile shear zone. The gold orebodies consist of gold-bearing quartz veins and altered mylonite. The mineralization can be divided into three stages: quartz–pyrite veins in the early stage, sulfide–quartz veins in the middle stage, and quartz–carbonate veins or veinlets in the late stage. Ore minerals and native gold mainly formed in the middle stage. Four types of fluid inclusions were identified based on petrography and laser Raman spectroscopy: CO2–H2O inclusions (C-type), pure CO2 inclusions (PC-type), NaCl–H2O inclusions (W-type), and daughter mineral-bearing inclusions (S-type). The early-stage quartz contains only primary CO2–H2O fluid inclusions with salinities of 1.62 to 8.03 wt.% NaCl equivalent, bulk densities of 0.73 to 0.89 g/cm3, and homogenization temperatures of 256 °C–390 °C. Vapor bubbles are composed of CO2. The middle-stage quartz contains all four types of fluid inclusions, of which the CO2–H2O and NaCl–H2O types yield homogenization temperatures of 210 °C–340 °C and 230 °C–300 °C, respectively. The CO2–H2O fluid inclusions have salinities of 0.83 to 9.59 wt.% NaCl equivalent and bulk densities of 0.77 to 0.95 g/cm3, with vapor bubbles composed of CO2, CH4, and N2. Fluid inclusions in the late-stage quartz are NaCl–H2O solution with low salinities (0.35–3.87 wt.% NaCl equivalent) and low homogenization temperatures (122 °C–214 °C). The coexistence of inclusions of these four types in middle-stage quartz suggests that fluid boiling occurred in the middle-stage mineralization. Trapping pressures estimated from CO2–H2O inclusions are 110–300 MPa and 90–250 MPa for the early and middle stages, respectively, suggesting that gold mineralization mainly occurred at depths of about 10 km. In general, the Wangfeng gold deposit originated from a metamorphic fluid system characterized by low salinity, low density, and enrichment of CO2. Depressurized fluid boiling caused gold precipitation. Given the regional geology, ore geology, fluid-inclusion features, and ore-forming age, the Wangfeng gold deposit can be classified as a hypozonal orogenic gold deposit.  相似文献   

13.
Analyses of co-existing silicate melt and fluid inclusions, entrapped in quartz crystals in volatile saturated magmatic systems, allowed direct quantitative determination of fluid/melt partition coefficients. Investigations of various granitic systems (peralkaline to peraluminous in composition, log fO2 = NNO−1.7 to NNO+4.5) exsolving fluids with various chlorinities (1-14 mol/kg) allowed us to assess the effect of these variables on the fluid/melt partition coefficients (D). Partition coefficients for Pb, Zn, Ag and Fe show a nearly linear increase with the chlorinity of these fluid (DPb ∼ 6 ∗ mCl, DZn ∼ 8 ∗ mCl, DAg ∼ 4 ∗ mCl, DFe ∼ 1.4 ∗ mCl, where mCl is the molinity of Cl). This suggests that these metals are dissolved primarily as Cl-complexes and neither oxygen fugacity nor the composition of the melt affects significantly their fluid/melt partitioning. By contrast, partition coefficients for Mo, B, As, Sb and Bi are highest in low salinity (1-2 mol/kg Cl) fluids with maximum values of DMo ∼ 20, DB ∼ 15, DAs ∼ 13, DSb ∼ 8, DBi ∼ 15 indicating dissolution as non-chloride (e.g., hydroxy) complexes. Fluid/melt partition coefficients of copper are highly variable, but highest between vapor like fluids and silicate melt (DCu ? 2700), indicating an important role for ligands other than Cl. Partition coefficients for W generally increase with increasing chlorinity, but are exceptionally low in some of the studied brines which may indicate an effect of other parameters. Fluid/melt partition coefficients of Sn show a high variability but likely increase with the chlorinity of the fluid (DSn = 0.3-42, DW = 0.8-60), and decrease with decreasing oxygen fugacity or melt peraluminosity.  相似文献   

14.
Monophase negative-crystal shaped CO2 inclusions occurring isolated, in small clusters, or in well-healed intragranular fractures are common in the leucosome quartz of the 1700m.y.-old migmatites from the east-central Colorado Front Range. They are, however, quite rare in the mafic selvage and paleosome (host rock) quartz. The mode of occurrence suggests that these are the earliest inclusions to form. In addition to the difference in abundance of the inclusions, there is a difference in CO2-density distribution between migmatitic zones. The temperatures of homogenization for the leucosome inclusions range and +l°C from –67° C to +20° C with two maxima (at –21° C) while those for the paleosome and selvage inclusions are –37° C to +20° C with a single maximum at + 5° C. These differences between the migmatitic zones which occur on the scale of a few centimeters suggest that the formation of these inclusions was related to the migmatization process. The densities corresponding to the Th maxima are appropriate for the P-T conditions for migmatization estimated from the mineral geobarometer/geothermometer. These inclusions must contain nearly pure CO2, as their final melting temperatures (–56.5° to –57.2° C) are very close to that of the triple point of CO2. Their composition also was confirmed by Raman spectroscopic analyses.It has been proposed by other workers that CO2 fluid in the inclusions could form from an H2O-CO2 fluid when H2O is partitioned into the silicate melt. Such partitioning should result in some early H2O-rich inclusions: H2O must be released as the melt crystallizes. As found in migmatites from other areas, most aqueous inclusions in the Front Range rocks are obviously much younger than the early CO2 ones. However, early H2O-rich fluid may still be preserved, at least in three ways: (A) in rare, isolated or clustered inclusions within quartz inclusions in feldspar; (B) as inclusions in microcline porphyroblasts; (C) in hydrous alteration products of feldspar. (A) contain dilute fluids, 1 to 6 wt% NaCl equivalent. The densities of (A) as well as those of the early CO2 inclusions found in the quartz inclusions in feldspar are appropriate for the range of P — T conditions estimated for migmatization. These early inclusions must have been preserved because of protected environment. Inclusions (B), found to contain H2O (and possibly CO2) by infrared analyses, must be early because they are absent from recrystallized grains. (B) and (C) are much more common in the leucosome than in the other zones suggesting that they are related to migmatization process. The concentration of early CO2 inclusions in the leucosome is consistent with the model of migmatization in which fluid concentration in the leucosome was a cause of melting.  相似文献   

15.
Considerable advances in our understanding of physicochemical properties of geological fluids and their roles in many geological processes have been achieved by the use of synthetic fluid inclusions. We have developed a new method to synthesize fluid inclusions containing organic and inorganic material in fused silica capillary tubing. We have used both round (0.3 mm OD and 0.05 or 0.1 mm ID) and square cross-section tubing (0.3 × 0.3 mm with 0.05 × 0.05 mm or 0.1 × 0.1 mm cavities). For microthermometric measurements in a USGS-type heating-cooling stage, sample capsules must be less than 25 mm in length. The square-sectioned capsules have the advantage of providing images without optical distortion. However, the maximum internal pressure (P; about 100 MPa at 22 °C) and temperature (T; about 500 °C) maintained by the square-sectioned capsules are less than those held by the round-sectioned capsules (about 300 MPa at room T, and T up to 650 °C).The fused silica capsules can be applied to a wide range of problems of interest in fluid inclusion and hydrothermal research, such as creating standards for the calibration of thermocouples in heating-cooling stages and frequency shifts in Raman spectrometers. The fused silica capsules can also be used as containers for hydrothermal reactions, especially for organic samples, including individual hydrocarbons, crude oils, and gases, such as cracking of C18H38 between 350 and 400 °C, isotopic exchanges between C18H38 and D2O and between C19D40 and H2O at similar temperatures. Results of these types of studies provide information on the kinetics of oil cracking and the changes of oil composition under thermal stress.When compared with synthesis of fluid inclusions formed by healing fractures in quartz or other minerals or by overgrowth of quartz at elevated P-T conditions, the new fused-silica method has the following advantages: (1) it is simple; (2) fluid inclusions without the presence of water can be formed; (3) synthesized inclusions are large and uniform, and they are able to tolerate high internal P; (4) it is suitable for the study of organic material; and (5) redox control is possible due to high permeability of the fused silica to hydrogen.  相似文献   

16.
Experiments were conducted to determine the extent and mechanism by which the composition of quartz-hosted silicate melt inclusions (SMI) and aqueous fluid inclusions (FI) can undergo post-entrapment modification via diffusion. Quartz slabs containing assemblages of SMI and FI were reacted with synthetic HCl bearing and metalliferous aqueous fluids at T = 500-720 °C and P = 150-200 MPa. SMI from the single inclusion assemblages were analyzed by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) and electron probe microanalysis (EPMA) before and after the experiments. Analyses revealed that rapid diffusion of the univalent cations Na+, Li+, Ag+, Cu+ and H+ occurred through the quartz from the surroundings, resulting in significant changes in the concentrations of these elements in the inclusions. Concentrations of other elements with an effective ionic radius larger than that of Ag+, or multiple valence states were not modified in the inclusions during the experiments. Our results warn inclusion‘‘ researchers that the interpretation of Na, Li, Cu and Ag concentrations from quartz-hosted SMI and FI should be treated critically.  相似文献   

17.
The Sanshandao gold deposit, with total resources of more than 60 t of gold, is located in the Jiaodong gold province, the most important gold province of China. The deposit is a typical highly fractured and altered, disseminated gold system, with high-grade, quartz-sulphide vein/veinlet stockworks that cut Mesozoic granodiorite. There are four stages of veins that developed in the following sequence: (1) quartz-K-feldspar-sericite; (2) quartz-pyrite±arsenopyrite; (3) quartz-base metal sulfide; and (4) quartz-carbonate. Fluid inclusions in quartz and calcite in vein/veinlet stockworks contain C-O-H fluids of three main types. The first type consists of dilute CO2–H2O fluids coeval with the early vein stage. Molar volumes of these CO2–H2O fluid inclusions, ranging from 50–60 cm3/mol, yield estimated minimum trapping pressures of 3 kbar. Homogenization temperatures, obtained mainly from CO2–H2O inclusions with lower CO2 concentration, range from 267–375 °C. The second inclusion type, with a CO2–H2O±CH4 composition, was trapped during the main mineralizing stages. These fluids may reflect the CO2–H2O fluids that were modified by fluid/rock reactions with altered wallrocks. Isochores for CO2-H2O±CH4 inclusions, with homogenization temperatures ranging from 204–325 °C and molar volumes from 55 to 70 cm3/mol, provide an estimated minimum trapping pressure of 1.2 kbar. The third inclusion type, aqueous inclusions, trapped in cross-cutting microfractures in quartz and randomly in calcite, are post-mineralization, and have homogenization temperatures between 143–228 °C and salinities from 0.71–7.86 wt% NaCl equiv. Stable isotope data show that the metamorphic fluid contribution is minimal and that ore fluids are of magmatic origin, most likely sourced from 120–126 Ma mafic to intermediate dikes. This is consistent with the carbonic nature of the fluid, and the cross-cutting nature of those deposits relative to the host Mesozoic granitoid.Editorial handling: R.J. Goldfarb  相似文献   

18.
Fluid inclusions in the metamorphic aureole of the Eureka Valley‐Joshua Flat‐Beer Creek (EJB) pluton in the White‐Inyo Range, California, reveal the compositions and origin of fluids that were present during variable recrystallization of quartzite with sedimentary grain shapes to metaquartzite with granoblastic texture. Metamorphosed sedimentary formations, including quartzites, marbles, calcsilicates and schists, became ductile and strongly attenuated in the aureole during growth of the magma chamber. The microstructures of quartzites have an unusual distribution in that within ~250 m from the pluton, where temperatures exceeded 650 °C, they exhibit relict sedimentary grain shapes, only small amount of grain boundary migration (GBM), and crystallographic preferred orientations (CPOs) dominated by <a> slip. At distances >250 m, quartzites were completely recrystallized by GBM and CPOs are indicative of prism [c] slip, characteristics that are typically associated with H2O‐assisted, high‐T recrystallization. The lack of extensive GBM in the inner aureole can be attributed to rapid replacement of H2O by CO2 produced by reaction of quartz grains with calcite cement that also produced interstitial wollastonite. Fluid inclusions in the inner aureole generally occur in margins of quartz grains and are either wholly aqueous (Type 1) or also contain H2S, CO2 and CH4 (Type 2). Type 2 inclusions occur only in some stratigraphic layers. In both inclusion types, NaCl and CaCl2, in variable proportions, dominate the solutes in the aqueous phase, whereas FeCl2 and KCl are less abundant solutes. The solutes indicate attainment of a degree of equilibrium with carbonates and schists that are interbedded with the quartzites. Some Types 1 and 2 inclusions in the inner aureole show evidence of decrepitation due to high amounts of strain and/or heating suffered by the host rocks, which suggests that they represent pore fluids that existed in the rocks prior to contact metamorphism. In addition to Type 1 inclusions, outer aureole quartzites also contain inclusions that contain CO2 vapour bubbles in addition to aqueous phase (Type 3). These inclusions only occur in interiors of granoblastic quartz that was produced by large amounts of GBM. The aqueous phase has identical ranges of first melting and final ice melting temperatures as Type 1 inclusions, suggesting that they have the same solute compositions. These inclusions are thought to represent the interstitial pore H2O that promoted recrystallization of quartz and reacted with graphite to produce CO2. Absence of significant amounts of CH4 in Type 3 inclusions is attributed to elevated fO2 that was buffered by mineral assemblages in interbedded schists. As opposed to the large amount of CO2 that was produced by the wollastonite‐forming reaction in the inner aureole to inhibit GBM, the amount of CO2 produced in the outer aureole by reaction between H2O and graphite was apparently insufficient to inhibit recrystallization of quartz.  相似文献   

19.
The high-pressure granulites of the Uluguru Mountains are part of the Pan-African belt of Tanzania, the metamorphic evolution of which is characterized by an anticlockwise P-T path. Mineral assemblages that represent distinct metamorphic stages are selected for fluid inclusion studies in order to deduce the fluid evolution in metapelites and pyroxene granulites from the prograde to the retrograde stage. Fluid inclusion data improve the petrologically derived P-T path and confirm the anticlockwise evolution. Fluid inclusions in quartz enclosed in garnet porphyroblasts in metapelites preserve prograde fluids of CO2–N2 composition and later-trapped pure CO2. During isochoric heating at temperatures near the peak of metamorphism, deformation and recrystallization led to fluid homogenization yielding N2-poor CO2 composition in the metapelites. Near-peak CO2–N2 fluid inclusions in quartz of metapelites and CO2 inclusions in garnet-pyroxene granulites are characterized by perfect negative crystal shape. Garnet formed in veins and as coronas around orthopyroxene represent the near-isochoric/isobaric cooling stage which is characterized by high-density CO2-rich fluid inclusions. Up to 15 mol% N2 in some primary CO2 inclusions in corona garnet indicate small-scale fluid heterogeneity during the static garnet growth. The fact that high-density fluid inclusions are preserved, suggests a shallow dP/dT slope of the uplift path. Nevertheless, some fluid inclusions decrepitated or re-equilibrated and low-density CO2 inclusions were trapped in the garnet-pyroxene granulite while N2–CH4 inclusions formed in the metapelites. Different fluid compositions in metapelite and metabasite argue for an internal control of the fluid composition by phase equilibria. In shear zones where the pyroxene granulite was transformed into scapolite-biotite schist, CO2–N2 and low-density N2–CH4 fluid inclusions indicate several stages of tectonic activity and suggest fluid influx from the nearby metapelites. High- and low-salinity aqueous inclusions observed beside CO2 inclusions in garnet-pyroxene granulites, in vein quartz and shear zones could be of high-grade origin but are mainly re-equilibrated or re-trapped along healed microfractures during lower-grade stages. Received: 21 May 1997 / Accepted: 6 October 1997  相似文献   

20.
Along a NW-SE profile through the basement core, starting below the sedimentary unconformity and ending in the center of the nearly circular structure, the constituent quartz grains and their fluid inclusions exhibit the following characteristics:In the NW, fluid inclusions composed of CO2 and occasionally up to 50 Vol.% H2O occur along shock-induced planar elements following predominently {0 0 0 1} of coarse, largely unrecrystallized quartz grains. The planar elements are partly still open microcracks, partly they are healed, the fluid inclusions decorating the former sites of the cracks. Along these planar elements recrystallization into fine grained new quartz fabrics starts, this process increasing decidedly towards the southeast; nevertheless fluid inclusions are still retained. — Near and within the center of the dome the formerly coarse quartz grains are completely recrystallized to medium grained annealing fabrics, in which — surprizingly — the fluid inclusions have often retained their original positions relative to the old grains, so that their planar alignment now traverses the new grain boundaries. Here the enclosed fluid is pure CO2 as far as can be determined.On the basis of the homogenization temperatures of the fluid inclusions measured, and of independent petrologic geothermometry of the basement rocks near the center, the fluids trapped after the shock event had exhibited partial pressures of CO2 as high as 3 kbars at temperatures around 850° C. The derivation of these CO2-rich, post-shock fluids is either through release of older fluid inclusions from the lower crustal granulites affected by the catastrophic shattering event, or it is from a direct mantle source that might be genetically connected with the Vredefort event itself.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号