共查询到20条相似文献，搜索用时 578 毫秒
1.
Considering the shear deformation and thickness stretching of large deformation, a modified numerical calculation method based on the thick shell theory is established to determine the collapse pressure of thick-walled pipes. Verification experiments are conducted on ten pipe specimens in hyperbaric chambers. The good agreement between experimental results and numerical predictions shows the validity and reliability of the new numerical calculation method. Combining DNV specification, the characteristic collapse pressure is also calculated for comparison. The difference between experimental results and DNV calculations illustrates the latter one is much conservative in predicting collapse pressure for thick-walled pipes. Sensitivity analysis on manufacturing imperfections and material properties is investigated for pipes with different D/t ratios. Thick-walled pipes are easier to be affected by initial ovality, residual stress and hardening factor. Based on the stress distribution at the moment of collapse, a novel discovery is found that the collapse pressure of thick-walled pipes is dominated by material plastic behavior. 相似文献
2.
玻纤增强柔性管作为一种新型海底油气输送管道,具有比强度高、柔度大和抗腐蚀性强等特点,因此在深海油气开发中具有非常广阔的应用前景。玻纤增强柔性管主要由内衬层、增强层和外保护层组成,其中增强层的等效模拟是玻纤增强柔性管设计成功与否的关键。根据玻纤增强柔性管的结构特征和材料特性,选取了四种不同的等效简化模型,对比研究了玻纤增强柔性管在轴向拉压荷载、弯曲荷载以及内压荷载作用下的力学性能。将不同简化模型的计算结果与相应的试验数据进行对比,进行等效模型的优选。研究结果表明,在内压载荷和弯曲载荷作用下,基于Halpin-Tsai模型数值结果与试验结果最为接近。在轴向载荷作用下,采用分离式模型或回形模型计算精度更高,若材料达到屈服状态时,则建议采用分离式模型进行模拟。 相似文献
3.
Sandwich pipes (SP), a composite structure consisting of two concentric steel tubes and a polymeric or cement-based core has been proposed to be well-insulated and withstand high installation and operational loads in deepwater oil and gas field. In the paper, the post-buckling responses and pressure capacity of sandwich pipes filled with the solid polypropylene annular were investigated. The degree of the inter-layer adhesion condition between the core layer and the surrounding pipes was modeled by the contact surfaces adopting different maximum shear strength values to allow the relative displacement between the layers. The effects such as inter-layer adhesion interactions, thickness-to-radius ratios, the core thickness, the material parameters, the relative initial ovality directions and the inelastic anisotropy on the collapse pressure of SPs were discussed. More than 2000 finite element (FE) models of the sandwich pipes with practical configurations were constructed and analyzed using the programming language Python within the FE software package ABAQUS. Based on the FE results, a simplified equation was developed and recommended for the collapse pressure calculation of sandwich pipes with the polypropylene annular. 相似文献
4.
Tian-Shun Hou Wei Wang Ya-Sheng Luo Jin-Qian Dang Xiu-Juan Yang 《Marine Georesources & Geotechnology》2013,31(3):264-276
To reveal the influence of material composition on mechanical properties of light-weight soil, stress-strain -volumetric strain characteristics and Poisson's ratio of mixed soil were researched by consolidated drained shear tests. The results show that light-weight soil is a kind of structural soil, so its mechanical properties are affected by mixed ratio and confining pressure, and mixed soil possesses structural yield stress. When confining pressure is less than the structural yield stress, strain softening occurs; when confining pressure is more than the structural yield stress, strain hardening is observed. There are two kinds of volume change behavior: shear contraction and shear dilatancy. Shear dilatancy usually leads to strain softening, but there isn't an assured causal relationship between them. Poisson's ratio of mixed soil is a variational state parameter with the change of stress state, it decreases with increased confining pressure, and it increases with increased stress level. When axial strain is near 5%, Poisson’ ratio is gradually close to a steady value. The main range of Poisson's ratio is 0.25～0.50 when confining pressure changes from 50 to 300 kPa. When unconfined compressive strength of mixed soil is less than 328 kPa, its stress-strain-volumetric strain characteristics can be predicted very well by Duncan-Chang model (E-B model). However, when the range of unconfined compressive strength is [328 kPa, 566 kPa], the model can't predict stress-strain characteristics accurately when confining pressure is under 200 kPa, and it also can't predict the strong shear dilatancy phenomenon of mixed soil under low confining pressure. 相似文献
5.
The behaviors of granular material and influencing factors under complex dynamic loading are studied by more and more researchers with particle flow method. Only the strain-controlled loading has been generally used in the current study, although this method was not consistent with the practice of engineering in many situations. In this article, stress-controlled dynamic simulation tests were carried out with particle flow method, which were used to study the collapse characteristics of silt under mutation of principal stress orientation. The tests were performed by PFC2D. The simulation results and the laboratory real tests’ results had a high degree of similarity, particularly in the collapse strain and vibration times. It was very useful to forecast the silt's critical failure state. Based on the verification data, the effects of confining pressure and cyclic shear stress ratio on the collapse characteristics of silt were studied further. With the increase of cyclic shear stress ratio, the deviator strain amplitude increased and the required vibration times gradually reduced to achieve the same strain level. Under the same dynamic shear stress ratio and vibration times, the initial dynamic elastic modulus slightly increased with the increase of initial confining pressure, and the variation range of final collapse deviator strain was small. In the analysis of micro-structural evolution, the redistribution of internal stress of sample was revealed during cyclic loading. With the increase of vibration times, the development of distribution gradually stabilized, and then the high shear stress appeared in some connected regions. On that stage, the particle system developed to instability and failure. The PFC simulation results confirmed that the collapse state was the critical stage to trigger the liquefaction of silt. 相似文献
6.
The paper presents a non-linear buckling analysis of ring stiffened cylindrical shells subject to external pressure. The collapse pressure is calculated by assuming failure to occur when the material reaches a plastic stress state defined by the Ilyushin criterion. It is shown in the paper that use of the non-linear theory can reduce the estimated first yield by up to 25% in comparison to the linear buckling analysis used up to now. Comparison of predicted failure loads are in good agreement with the lower bound of test results. 相似文献
7.
Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods. 相似文献
8.
The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results;besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen. 相似文献
9.
循环应力下饱和黏土剪切变形特性试验研究 总被引：3，自引：0，他引：3
针对饱和重塑黏土,利用土工静力-动力液压三轴-扭转多功能剪切仪,在不固结不排水(UU)条件下进行了应力控制式循环扭剪和竖向-扭转耦合试验,通过对试验结果的对比分析探讨了初始预剪应力和应力反向对应力-应变关系特性的影响,并阐述了不同加荷模式下孔隙水压力发展特性。以此为基础,综合考虑剪切变形和正向偏差变形的共同效应,同时为了能够反映平均残余变形和循环变形的影响,建议了一个综合应变破坏标准的算式。进而通过利用试验数据与目前常用的应变标准比较,表明这种破坏标准具有普遍适用性和较好的稳定性,适用于判定各种应力条件下黏土试样破坏及其强度。 相似文献
10.
11.
非黏结柔性管道骨架层由不锈钢材料互锁缠绕而成,主要用于抵抗外压防止软管发生压溃失效.骨架层失效是柔性软管故障的最大风险,骨架层失效模式主要分为压溃失效和拉伸失效.采用非线性有限元方法并且考虑几何大变形、材料非线性、接触和摩擦等非线性效应的影响,对"S"型骨架层结构建立三维有限元模型,进行了单外压作用下的压溃失效分析和单一轴向拉力作用下的拉伸失效分析,而后开展轴向拉力和外压载荷组合作用下骨架层压溃失效分析.结果表明轴向拉力会一定程度上降低骨架层压溃承载力,相关结论可以为柔性软管结构设计和完整性评价提供参考. 相似文献
12.
Joonmo Choung 《Ocean Engineering》2009,36(15-16):1164-1174
Smooth and notched round specimens and smooth flat specimens are prepared from two steels, API-2W50 and DnV-DH32TM. From incremental tensile tests for smooth specimens, average true stress–logarithmic true strain curves are obtained. By using Bridgman's formula for round specimens and Choung's formula for flat specimens, average true stress is rectified. Then, tensile tests for notched specimens with various notch radiuses are carried out and damage tests are performed to identify material parameters of the damage mechanics model. Three yield models are taken into account: a shear fracture model based on a von Mises's yield function, a linear damage mechanics model based on Lemaitre's law of damage evolution, and a porous plasticity model based on Gurson's yield function. While the shear fracture model can forecast the tested plastic deformation path including final fracture for smooth specimens, it unrealistically estimates that the hydrostatic stress at the necking section largely contributes the plastic behaviors for notched specimens. The linear damage mechanics model assumes linear relationship between the damage value and plastic strain, and fails to accurately estimate the test results. The porous plasticity model presents very good agreement with experimental results regardless of the notch radiuses as long as material parameters are reasonably chosen. 相似文献
13.
Metallic strip flexible pipes (MSFP), a relatively new style of unbonded flexible pipes, are considered as an attractive alternative to traditional submarine pipes. Pipelines will inevitably confront torsion load which may affect the integrity and safety during their installation and application. Throughout this paper, the mechanical behavior of MSFP subjected to pure torsion is investigated by both experimental and numerical methods. Results from these two methods are essentially in agreement with each other. The finite element method (FEM) can be adopted to predict the failure torque of MSFP under torsion and analyze the detailed stress conditions of each layer. In addition, the effects of boundary conditions, layout manners of steel strips, friction coefficients between contact surfaces, twist directions and tension loads are discussed. The obtained conclusions will benefit cross-section design of MSFP and relative practical engineering. 相似文献
14.
The results of five centrifuge tests of a stiff circular model platform on overconsolidated undisturbed Drammen clay are reported from Manchester University together with predictions computed at the Norwegian Geotechnical Institute. Towards failure the models developed high shear strain and softening local to the base, accompanied by a permanent settlement or shakedown. A total stress transfer from edge to centre caused a rapid increase of excess pore pressure under the centre, having a high vertical gradient. These features, and failure values which decreased with increase in eccentricity of loading, conformed with previous observations on reconstituted clays. Comparison of observations with predictions highlights the sensitivity of the analytical method to the fineness of the finite element mesh just below the base. The predictions also indicated a sensitivity of the failure load to the degree of overconsolidation associated with a given undrained shear strength. The elastic type analysis did not predict the degree of shakedown which was associated with plastic displacement of clay from just under the base. 相似文献
15.
腐蚀是管道常见的缺陷形式之一,会极大降低管道的压溃压力,同时深海环境下高静水外压易引发管道压溃失效,威胁管道的安全运行,因此准确预测管道压溃压力显得尤为重要。采用数值模拟方法研究了含腐蚀缺陷的高强钢厚壁管道压溃失效模式,分析了管材、管道径厚比、腐蚀深度、长度和宽度等参数对高强钢厚壁管道压溃压力的影响规律。分析结果表明:管道径厚比愈大,对厚壁管道的承压能力提升愈显著;腐蚀缺陷的存在对管道压溃压力具有减小作用;随着管道材料等级的提升,压溃压力有明显提高。提出了相应的压溃压力预测公式,为厚壁管道完整性评价提供了参考依据。 相似文献
16.
This article presents a testing study on the strain-rate effects on the stress--strain behavior of natural, undisturbed Hong Kong marine deposits (HKMD) from three Hong Kong locations, including a one-dimensional (1-D) compressibility in a confined condition, and undrained shear strengths in triaxial compression and extension modes. The influences of the strain rates on the one-dimensional compressibility are studied by means of constant rate of strain (CRS) tests and multistage loading oedometer (MSL) tests, and those on the undrained shear strengths are studied by Ko-consolidated undrained compression and extension tests with step-changed axial strain rates (CKoUC and CKoUE tests), and with both step-changed axial strain rates and relaxation processes (CKoUCR and CKoUER tests). The strain-rate effects on the stress--strain behavior are generally examined by “apparent” preconsolidation pressures in the 1-D compressions and undrained shear strengths in the triaxial compression and extension stress states. The stress--strain behavior of the natural, undisturbed HKMD exhibits considerable viscous characteristics. In the CRS and MSL tests at a given strain, the higher the strain rate, the higher the effective stress, the higher the porewater pressure. In the undrained shearing tests, the higher the strain rate, the higher the undrained shear strength, but the lower the porewater pressure. For the CKoUC and CKoUE tests on the Tsing Yi site samples, the undrained shear strength increases by 8.5% and 12.1% for one order increment of axial strain rate of 0.2%/hr (i.e., ρ0.2) for the compression and extension modes respectively. For the CKoUCR and CKo tests on the Tung Chung site samples of different compositions, average ρ0.2 is increased by 6.2% for the compression and 9.5% for the extension, but by 18.8% for the extension on a higher plastic sample. The present study shows that the strain-rate effects on the stress--strain behavior of the undisturbed HKMD are larger for specimens in extension than those in compression. 相似文献
17.
18.
The steady flow-induced instability of a partially embedded pipeline involves a complex process of pipe-soil interaction. In accordance with the hydrodynamic loading and the dimensionless analyses, a series of pipe-soil interaction tests have been conducted with an updated pipe-soil interaction facility including a load-displacement synchronous measurement system, to reveal the underlying pipe-soil interaction mechanism. The effects of pipe surface roughness, end-constraint and initial embedment are investigated, respectively. The values of lateral-soil-resistance coefficient for the rough pipes are bigger than those for the smooth pipes. For a fixed value of non-dimensional submerged weight, the values of lateral-soil-resistance coefficient for the anti-rolling pipes are much larger than those for the freely laid pipes. The effects of initial embedment on the ultimate soil resistance get less with the decrease of the submerged weight of the pipe. A comparison is made between the results of the present mechanical-actuator tests and those of the previous water-flume tests, indicating that those results are quite comparable. For the equivalent level of dimensionless submerged weight, the directly laid pipe in currents has higher lateral stability than in waves. 相似文献
19.
The winding and unwinding of a pipeline onto a large diameter reel as practiced in the reeling installation method, induces bending strains of 1–3% followed by straightening, and reverse bending. The operator must ensure that such plastic deformations are sustained free of local buckling or rupture in the line. Such failures are for example precipitated by pipeline discontinuities in wall thickness and yield stress as they act as stress risers, lead to localized deformations severe enough to result in local buckling. The effect of such discontinuities is studied using a large-scale nonlinear finite element model that simulates the reeling/unreeling of a pipeline. Nonlinear kinematic hardening is used to capture the elasto-plastic behavior of the material imposed by the bending/reverse bending history. Discontinuities in wall thickness and yield stress are shown to result in sharp local changes in curvature that extend over 3–4 pipe diameters accompanied by severe local straining and ovalization. The extent of the disturbance is governed by the bending strain imposed by the ratio of pipe to reel diameter. It can be reduced by an increase in the applied tension but at the expense of additional ovalization of the pipeline. It can also be reduced by increasing the pipe wall thickness but with the consequent increase in costs. A parametric study of the effect of such discontinuities demonstrates that for some combinations of process parameters, the disturbance can lead to local buckling either during winding or unwinding. It is concluded that a modeling framework such as the one presented should be used to generate a design protocol for reel-installed pipelines. 相似文献
20.
AbstractCement soil mixing piles are an effective treatment method for marine soft clay. To investigate the static and dynamic characteristics of the composite soil with cemented soil core, a series of experiments are carried out by using the cyclic simple shear test. The result shows that, the static shear strain showed strain hardening, cemented soil core can improve static shear strength of composite soil, vertical stress can enlarge reinforcement of cemented soil core. The tendency of strain development of composite soil with different area replacement ratios under cyclic loading is the same as that of pure clay, existing critical cyclic stress ratios corresponding to different area replacement ratios. In addition, improving area replacement ratio can increase cyclic strength. At same time, adding of cemented soil core does not change shape of hysteresis curve compared with it for clay either. Moreover, cemented soil core can also obstruct stiffness softening. Through regression analysis of the experimental data, relationship between cyclic number and soil softening index is proved to be linear. The results can give a reference for the dynamic characters of the marine soft clay foundation with cement soil mixing piles. 相似文献