首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
西藏拉萨林周地区的下二叠统旁多群的地层层序以前并不十分清楚,其中“杂砾岩”的成因也争议很大。通过详细的野外地质调查和研究,在林周旁多地区新发现了其中部的含有坠石的纹层状粘土岩,并建立了旁多群中部和上部的地层序列。旁多群中部以陆源碎屑少、悬浮泥质为主的欠补偿深水盆地相沉积为特征,而上部以陆源碎屑丰富的滨、浅海相沉积为特征。旁多群自下而上反映了两期岩浆构造事件:第一期发生在该群中部沉积之初,伴随着基性玄武岩的喷发,该群中部沉积时,盆地进入裂谷鼎盛时期,随后进入以旁多群上部为代表的裂谷充填阶段;第二期构造事件可能发生在旁多群和乌鲁龙组沉积之交,乌鲁龙组沉积物中含有大量的长石碎屑、火山岩岩屑和凝灰质沉积岩,指示这期岩浆构造活动的存在。旁多群中的坠石沉积指示旁多群的形成背景是裂谷构造环境下的冰海相。旁多群中的杂砾岩按照成因可以划分为:具有正粒序结构的杂砾岩,为重力流沉积岩,反映侧向水流的搬运;不具有正粒序结构的厚层块状、含有坠石沉积的杂砾岩,为水下冰碛岩,反映冰川、冰筏作用存在,指示大陆上有冰川作用。这种分类和命名有助于石炭-二叠纪冰川发育过程和旋回性的研究,也有助于提高冰海相地层的划分和对比的可靠性和精度。  相似文献   

2.
华北板块南缘新元古界罗圈组为一套特殊的杂砾岩层,其是否为冰川成因对于新元古代冰期的研究具有重要意义。在野外实测剖面的基础上,本研究对鲁山地区罗圈组岩性、岩相特征及冰蚀遗迹进行探索,恢复其沉积环境,结果显示:罗圈组底部存在冰溜面,主体为块状杂砾岩,砾石砾径差异较大,呈棱角及次棱角状,地层中含有砂岩透镜体及出现坠石构造;镜下观察砂岩分选磨圆差、颗粒支撑。上述特征说明豫西鲁山地区罗圈组为冰川成因,推断其为陆相冰碛岩及冰水环境形成的产物。本文建立了罗圈组冰川相、冰水相的沉积模式,对于确定该地区古环境、古地理及新元古代冰川发育范围具有一定的参考价值。  相似文献   

3.
《沉积地质学》61卷1—2期1989年1月一、澳大利亚维多利亚州中部晚古生代沉积岩的冰下沉积特征澳大利亚东南部维多利亚州中部Bacchus Marsh组的一个晚古生代混积岩剖面,其中含有: (1)长轴倒转的冰川擦痕漂砾; (2)缺乏水分选证据的砾石层; (3)薄的砂岩席状体和透镜体; (4)由密集的阶状断裂切割的板状和扭曲状砂岩体; (5)薄板状韵律层状粉砂岩和粘土岩。擦痕漂砾表明混积岩由运动着的湿底冰川冰下的冰碛层所堆积;砂岩席状体和透镜体表明冰下水压急剧增加;而变形砂岩体则表明某些新沉积的混积物的流动是上覆冰传递的剪切力的结果。砾石层可能为一种运动着的碎屑地毯,其形成于控制冰川大小的障碍壁附近,这些碎屑在沉积期间来自一层当时已停止活动的近底岩屑。这些特点说明了可能引起冰  相似文献   

4.
结合野外剖面实际观察、测量、岩石取样和室内工作,对巢湖马家山剖面下三叠统南陵湖组中段及上段地层的碳酸盐岩沉积微相特征及其古环境进行了初步的分析和探讨,探讨地层所反映的沉积环境背景。通过对670个岩石薄片的镜下观察,识别出了6种微相:MF1均质泥质泥晶灰岩微相、MF2水平纹层状泥晶灰岩微相、MF3含少量生物碎屑的泥晶灰岩微相、MF4含内碎屑和灰岩卵石的泥晶灰岩微相、MF5瘤状含丰富生物碎屑的泥晶灰岩微相、MF6泥(页)岩微相。推断该地区在斯帕斯亚期中晚期经历了深水盆地—外缓坡两种环境,整体为一个海退过程。  相似文献   

5.
结合野外剖面实际观察、测量、岩石取样和室内工作,对巢湖马家山剖面下三叠统南陵湖组中段及上段地层的碳酸盐岩沉积微相特征及其古环境进行了初步的分析和探讨,探讨地层所反映的沉积环境背景。通过对670个岩石薄片的镜下观察,识别出了6种微相:MF1均质泥质泥晶灰岩微相、MF2水平纹层状泥晶灰岩微相、MF3含少量生物碎屑的泥晶灰岩微相、MF4含内碎屑和灰岩卵石的泥晶灰岩微相、MF5瘤状含丰富生物碎屑的泥晶灰岩微相、MF6泥(页)岩微相。推断该地区在斯帕斯亚期中晚期经历了深水盆地—外缓坡两种环境,整体为一个海退过程。  相似文献   

6.
砾石颗粒的磨圆度对粗碎屑的沉积环境具有重要的指示意义。针对玛湖凹陷下三叠统百口泉组砾岩的地下钻井岩芯,运用去扁化De?flat磨圆度测量方法,通过定量获取砾石磨圆度参数对扇三角洲沉积中不同沉积微相的指示关系,分析黄羊泉扇的磨圆度及其方差的分布特征,讨论磨圆度定量表征指示扇三角洲沉积的科学性。研究结果表明,扇三角洲沉积的砾石磨圆度普遍较差,为次棱—次圆状和次棱角状。牵引流沉积的砾石磨圆度普遍好于重力流沉积的砾石磨圆度,且牵引流沉积的砾石磨圆度方差明显小于重力流沉积的方差,指示河道沉积中的砾石磨圆度更加集中。黄羊泉扇砾石磨圆度以棱角状和次棱角状为主。通过黄羊泉扇区砾岩砾石颗粒磨圆度及其方差的变化趋势,表明磨圆度对沉积相带具有指示意义。砾石磨圆度的定量表征可以为粗粒碎屑沉积相分析提供新的定量沉积学手段。  相似文献   

7.
通常认为黔西南和黔南地区二叠纪栖霞组之下的一套陆缘碎屑岩地层,是石炭纪-二叠纪冈瓦纳大陆冰盖发育鼎盛时期大幅度海平面下降期间的沉积。最新研究表明,石炭纪-二叠纪冈瓦纳冰川是由多次不连续的冰川事件构成的。因此恢复该套以陆源碎屑岩为主地层的形成环境和堆积过程,探讨其成因与冈瓦纳冰川发育的关系,具有非常重要的科学意义。本研究查明了黔西南地区该套陆源碎屑岩的地层厚度和砂泥比值空间变化规律。在此基础上,选取碎屑岩发育最好的普安龙吟剖面开展沉积体系与成因研究。结果表明,沙子塘组主要是碳酸盐沉积体系,龙吟组和包磨山组主要为浅海陆棚三角洲沉积体系,梁山组以滨岸陆源碎屑沉积体系为主;二叠纪早期黔西南地区的陆棚相泥岩形成于冰川消融导致的海平面快速上升期间,三角洲沉积体系形成于海平面晚期高位域期间,而不是形成于冈瓦纳冰川增长期间的低位域沉积。冈瓦纳冰川的推进和消融是龙吟剖面二叠纪早期地层发育样式的主控因素。  相似文献   

8.
对前人建立的上二叠统南皮河组的层型剖面——弄巴剖面进行了详细研究 ,发现该地层属于一套被动大陆边缘浊积岩为主的沉积岩系 ,可概括为四种层序类型特征 :一为代表浊流沉积的鲍马序列 ;二为由泥质岩与岩屑石英 (杂 )砂岩透镜体 (层 )构成的水道沉积序列 ;三为由薄层状砂岩与泥岩呈韵律状互层构成的浊流远端低密度流序列 ;四为薄层状硅质岩与硅质泥岩呈韵律状组成的基本层序。该组中采获了低等蕨类植物、牙形石和笔石等化石 ,证实其时代属于早泥盆世—晚泥盆世。根据该地层的岩性组合、沉积环境等特征及区域对比 ,应归于泥盆系温泉组。  相似文献   

9.
柴北缘东段石炭系克鲁克组为一套海陆过渡相碎屑岩和碳酸盐岩混合沉积,其中泥页岩较为发育。通过野外剖面踏勘和实测对克鲁克组泥页岩纵向发育特征进行了研究,发现克鲁克组一段泥页岩累计厚度为60 m,泥地比达92.6%,是泥页岩发育最好的层段。通过精细岩心观察描述、全岩X射线衍射分析、岩石薄片鉴定、扫描电镜观察及物性分析等,对泥页岩矿物组成、岩相、储集空间类型及物性特征进行了研究,结果表明,泥页岩矿物组成以石英和黏土矿物为主;黑色纹层状泥质中粉砂岩相、灰黑色条带状泥质粗粉砂岩相、灰黑色条带状含灰灰质泥质粗粉砂岩相和黑色纹层状含生物碎屑泥质中粉砂岩相为主要的岩相类型;储集空间主要发育顺层裂缝、溶蚀孔隙、黏土矿物晶间孔、有机质粒内孔隙及生物碎屑粒内孔;孔隙度在1%~3%,渗透率分布在0.01~1 mD。储层的发育主要受沉积环境、矿物组成和成岩作用的影响,黑色纹层状泥质中粉砂岩相和灰黑色条带状泥质粗粉砂岩相由于沉积厚度大、碳酸盐胶结作用弱、脆性指数较高、储集性能良好,有利于泥页岩储层的发育。  相似文献   

10.
在西成铅锌成矿带中,硅质岩是主要的含矿岩石之一。硅质岩常呈层状、似层状和透镜状产出,具有块状、纹层状、角砾状和多孔状构造。硅质岩中常有热不沉积矿物重晶石、铁白云石和草莓球状黄铁矿出现。在毕家册一邓家册式热水沉积改造矿床中,硅质岩与生物碎屑灰岩-含炭质生物碎屑灰岩-硅质岩-泥质岩组成特征的含矿沉积建造,且硅质岩的厚度与铅锌矿化成正比。硅质岩的主成分为SiO2,平均含量为90%,次为Al2O3、Fe2  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

13.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

18.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

19.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号