首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The conventional integral approach is very well established in probabilistic seismic hazard assessment (PSHA). However, Monte‐Carlo (MC) simulations can become an efficient and flexible alternative against conventional PSHA when more complicated factors (e.g. spatial correlation of ground shaking) are involved. This study aims at showing the implementation of MC simulation techniques for computing the annual exceedance rates of dynamic ground‐motion intensity measures (GMIMs) (e.g. peak ground acceleration and spectral acceleration). We use multi‐scale random field technique to incorporate spatial correlation and near‐fault directivity while generating MC simulations to assess the probabilistic seismic hazard of dynamic GMIMs. Our approach is capable of producing conditional hazard curves as well. We show various examples to illustrate the potential use of the proposed procedures in the hazard and risk assessment of geographically distributed structural systems. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

2.
Deterministic and probabilistic seismic hazard analyses should be complementary, in the sense that probabilistic analysis may be used to identify the controlling deterministic design‐level earthquake events, and more sophisticated models of these events may then be developed to account for uncertainties that could not have been included directly in the probabilistic analysis. De‐aggregation of the tentative uniform hazard spectra (UHS) in Hong Kong resulting from a probabilistic seismic hazard assessment (PSHA) indicates that strong and major distant earthquakes, rather than moderate local earthquakes, make the largest contribution to the seismic hazard level within the natural‐period range longer than 0.3 s. Ground‐motion simulations of controlling events located 90 and 340 km from Hong Kong, taking into account uncertainties in the rupture process, reveal that the tentative UHS resulting from the PSHA may have significantly underestimated the mid‐to‐long period components. This is attributed mainly to the adoption of double‐corner source‐spectrum models in the attenuation relationships employed in the PSHA. The results of the simulations indicate clearly that rupture directivity and rupture velocity can significantly affect the characteristics of ground motions, even from such distant earthquakes. The rupture‐directivity effects have profound implications in elongating the second corner period where the constant velocity intersects the constant displacement, thus increasing the associated displacement demand. However, demands for acceleration and velocity are found to be not sensitive to the presence of the directivity pulses. Ground pulses resulting from forward rupture directivity of distant earthquakes have longer predominant periods than the usual near‐fault directivity pulses. These long‐period pulses may have profound implications for metropolises, such as Hong Kong and others in Southeast Asia, having large concentration of high‐rise buildings. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

3.
史保平  刘博研  张健 《地震学报》2007,29(4):391-399
计算机仿真模拟设定地震断层动态破裂传播和近断层强地表运动响应的结果表明， 对于特征地震而言，近断层附近的地表运动特征与断层破裂传播的方向性有着强烈的依赖关系. 当场地（观测点）至断层的距离给定时，正向于破裂传播方向的场地（场地A）的地表质点运动（位移、速度、加速度），远远大于震中附近（场地B）和反向于破裂传播方向的场地（场地C）的地表质点运动，而且沿断层垂直分量所辐射的SH波的传播起到了主导作用. 对应于场地A，B和C，统计分析结果表明，峰值加速度的几何平均值之比为2.15:1.5:1， 而且各自的均方差分别为0.12, 0.11和0.13. 如果将所得的研究结果应用于概率地震危险性分析中，对于较低的年超越频度，近断层附近的地表峰值加速度的估算值可下降15%~30%. 因此，考虑到断层破裂传播方向性对地表运动的影响，区域衰减曲线的回归分析模型应该给予恰当的修正.   相似文献   

4.
Potential sources are simplified as point sources or linear sources in current probabilistic seismic hazard analysis (PSHA) methods. Focus size of large earthquakes is considerable, and fault rupture attitudes may have great influ-ence upon the seismic hazard of a site which is near the source. Under this circumstance, it is unreasonable to use the simplified potential source models in the PSHA, so a potential rupture surface model is proposed in this paper. Adopting this model, we analyze the seismic hazard near the Chelungpu fault that generated the Chi-Chi (Jiji) earthquake with magnitude 7.6 and the following conclusions are reached. 1 This model is reasonable on the base of focal mechanism, especially for sites near potential earthquakes with large magnitude; 2 The attitudes of poten-tial rupture surfaces have great influence on the results of probabilistic seismic hazard analysis and seismic zoning.  相似文献   

5.
Earthquakes damage engineering structures near, relatively to the rupture's size, to the source. In this region, the fault's dynamics affect ground motion propagation differently from site to site, resulting in systematic spatial variability known as directivity. Although a number of researches recommend that records with directivity‐related velocity pulses should be explicitly taken into account when defining design seismic action on structures, probabilistic seismic hazard analysis (PSHA), in its standard version, seems inadequate for the scope. In the study, it is critically reviewed why, from the structural engineering point of view, hazard assessment should account for near‐source effects (i.e., pulse‐like ground motions), and how this can be carried out adjusting PSHA analytically via introduction of specific terms and empirically calibrated models. Disaggregation analysis and design scenarios for near‐source PSHA are also formulated. The analytical procedures are then applied to develop examples of hazard estimates for sites close to strike–slip or dip–slip faults and to address differences with respect to the ordinary case, that is, when pulse‐like effects are not explicitly accounted for. Significant increase of hazard for selected spectral ordinates is found in all investigated cases; increments depend on the fault‐site configuration. Moreover, to address design scenarios for seismic actions on structures, disaggregation results are also discussed, along with limitations of current design spectra to highlight the pulse‐like effects of structural interest. Finally, an attempt to overcome these, by means of disaggregation‐based scenarios specific for the pulse occurrence case, is presented. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

6.
A composite source model has been used to simulate a broadband strong ground motion with an associated fault rupture process. A scenario earthquake fault model has been used to generate 1 000 earthquake events with a magni-tude of Mw8.0. The simulated results show that, for the characteristic event with a strike-slip faulting, the character istics of near fault ground motion is strongly dependent on the rupture directivity. If the distance between the sites and fault was given, the ground motion in the forward direction (Site A) is much larger than that in the backward direction (Site C) and that close to the fault (Site B). The SH waves radiated from the fault, which corresponds to the fault-normal component plays a key role in the ground motion amplification. Corresponding to the sites A, B, and C, the statistical analysis shows that the ratio of their aPG is 2.15:1.5:1 and their standard deviations are about 0.12, 0.11, and 0.13, respectively. If these results are applied in the current probabilistic seismic hazard analysis (PSHA), then, for the lower annual frequency of exceedance of peak ground acceleration, the predicted aPG from the hazard curve could reduce by 30% or more compared with the current PSHA model used in the developing of seismic hazard map in the USA. Therefore, with a consideration of near fault ground motion caused by the rupture directivity, the regression model used in the development of the regional attenuation relation should be modified accordingly.  相似文献   

7.
A probabilistic seismic hazard analysis (PSHA) was conducted to establish the hazard spectra for a site located at Dubai Creek on the west coast of the United Arab Emirates (UAE). The PSHA considered all the seismogenic sources that affect the site, including plate boundaries such as the Makran subduction zone, the Zagros fold-thrust region and the transition fault system between them; and local crustal faults in UAE. PSHA indicated that local faults dominate the hazard. The peak ground acceleration (PGA) for the 475-year return period spectrum is 0.17 g and 0.33 g for the 2,475-year return period spectrum. The hazard spectra are then employed to establish rock ground motions using the spectral matching technique.  相似文献   

8.
We present the basis for a method for estimating the return period of large and medium earthquakes that is independent of current deterministic and probabilistic approaches. The two standard techniques of seismic hazard assessment??probabilistic seismic hazard assessment (PSHA) and deterministic seismic hazard assessment (DSHA)??suffer from limited knowledge of seismic prehistory. A further weakness of PSHA is its requirement of homogeneous seismic activity within a seismic zone. Moreover, PSHA and DSHA were developed for seismically active areas and, thus, cannot reliably be used in areas of medium and low activity. In this paper we propose the combined use of geodetic strain rate data and the seismic moment data set determined for past seismic events. This combination represents a new and independent approach to estimation of future seismic activity. Using a modified version of Kostrov??s (Phys Solid Earth 1:23?C40, 1974) equation and the catalogue of seismic moments, the minimum return period of the strongest earthquakes of a source area is estimated.  相似文献   

9.
Seismic Hazard Assessment: Issues and Alternatives   总被引：3，自引：0，他引：3  
Seismic hazard and risk are two very important concepts in engineering design and other policy considerations. Although seismic hazard and risk have often been used interchangeably, they are fundamentally different. Furthermore, seismic risk is more important in engineering design and other policy considerations. Seismic hazard assessment is an effort by earth scientists to quantify seismic hazard and its associated uncertainty in time and space and to provide seismic hazard estimates for seismic risk assessment and other applications. Although seismic hazard assessment is more a scientific issue, it deserves special attention because of its significant implication to society. Two approaches, probabilistic seismic hazard analysis (PSHA) and deterministic seismic hazard analysis (DSHA), are commonly used for seismic hazard assessment. Although PSHA has been proclaimed as the best approach for seismic hazard assessment, it is scientifically flawed (i.e., the physics and mathematics that PSHA is based on are not valid). Use of PSHA could lead to either unsafe or overly conservative engineering design or public policy, each of which has dire consequences to society. On the other hand, DSHA is a viable approach for seismic hazard assessment even though it has been labeled as unreliable. The biggest drawback of DSHA is that the temporal characteristics (i.e., earthquake frequency of occurrence and the associated uncertainty) are often neglected. An alternative, seismic hazard analysis (SHA), utilizes earthquake science and statistics directly and provides a seismic hazard estimate that can be readily used for seismic risk assessment and other applications.  相似文献   

10.
Unique to the near‐source region of a large earthquake is the occurrence of strong impulsive ground motion and surface faulting referred to as ‘fling‐step’ motion. The objective of this study is to synthesize broad‐band time histories over a wide range of frequencies by characterizing rupture directivity and fling effects from the comprehensive strong motion database of the near‐fault Chi‐Chi event. To aid in the generation of these special types of ground motions, a hybrid modeling technique is introduced based on the stochastic finite‐fault radiation method and an efficient analytical approach to incorporate the observed low‐frequency features in the records close to the ruptured fault. The results show that the overall agreement among the developed hybrid methodology and recorded waveforms and response spectra is quite satisfying. A brief discussion on the design of infrastructures near seismic fault is also included. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

11.
The use of nonlinear static procedures for performance‐based seismic design (PBSD) and assessment is a well‐established practice, which has found its way into modern codes for quite some time. On the other hand, near‐source (NS) ground motions are receiving increasing attention, because they can carry seismic demand systematically different and larger than that of the so‐called ordinary records. This is due to phenomena such as rupture forward directivity (FD), which can lead to distinct pulses appearing in the velocity time‐history of the ground motion. The framework necessary for taking FD into account in probabilistic seismic hazard analysis (PSHA) has recently been established. The objective of the present study is to discuss the extension of nonlinear static procedures, specifically the displacement coefficient method (DCM), with respect to the inelastic demand associated with FD. In this context, a methodology is presented for the implementation of the DCM toward estimating NS seismic demand, by making use of the results of NS‐PSHA and a semi‐empirical equation for NS‐FD inelastic displacement ratio. An illustrative application of the DCM, with explicit inclusion of NS‐pulse‐like effects, is given for a set of typical plane R/C frames designed under Eurocode provisions. Different scenarios are considered in the application and nonlinear dynamic analysis results are obtained and discussed with respect to the static procedure estimates. Conclusions drawn from the results may help to assess the importance of incorporating NS effects in PBSD. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

12.
基于数值格林函数法的近场强地震动数值模拟方法,以1994年Northridge地震断层面上位错量的不均匀分布模式和该地区的地层剪切波速度结构为震源模型和计算模型,做了两个方面的模拟研究:(1)直立走滑断层(断层倾角为90°)情况下,模拟分析了有限断层单侧破裂模式和双侧破裂模式对强地震动特征——破裂方向性和上盘效应的影响;(2)对于倾斜断层(倾角为45°),模拟分析了正断层、逆断层和走滑断层情况下,单侧破裂模式对其强地震动主要特征——破裂方向性效应和上盘效应的影响.结果表明:断层的破裂方式直接影响着地表地震动峰值和矢量分布;在近场区无论直立断层还是倾斜断层,其地表地震动峰值分布所表达的破裂方向性效应显著,位于破裂传播前方的地震动强度大,反映了波前被压缩的趋势,破裂后方地震强度明显变小;倾斜断层引起的上盘效应明显,NS向分量和竖向分量的地表地震动峰值的最大值出现在上盘靠近断层迹线处,EW向分量的峰值在断层迹线两侧呈不对称分布,且逆断层引起的地震动峰值最大,走滑断层的次之,正断层的最小.  相似文献   

13.
Modern earthquake ground motion hazard mapping in California began following the 1971 San Fernando earthquake in the Los Angeles metropolitan area of southern California. Earthquake hazard assessment followed a traditional approach, later called Deterministic Seismic Hazard Analysis (DSHA) in order to distinguish it from the newer Probabilistic Seismic Hazard Analysis (PSHA). In DSHA, seismic hazard in the event of the Maximum Credible Earthquake (MCE) magnitude from each of the known seismogenic faults within and near the state are assessed. The likely occurrence of the MCE has been assumed qualitatively by using late Quaternary and younger faults that are presumed to be seismogenic, but not when or within what time intervals MCE may occur. MCE is the largest or upper-bound potential earthquake in moment magnitude, and it supersedes and automatically considers all other possible earthquakes on that fault. That moment magnitude is used for estimating ground motions by applying it to empirical attenuation relationships, and for calculating ground motions as in neo-DSHA (Zuccolo et al., 2008). The first deterministic California earthquake hazard map was published in 1974 by the California Division of Mines and Geology (CDMG) which has been called the California Geological Survey (CGS) since 2002, using the best available fault information and ground motion attenuation relationships at that time. The California Department of Transportation (Caltrans) later assumed responsibility for printing the refined and updated peak acceleration contour maps which were heavily utilized by geologists, seismologists, and engineers for many years. Some engineers involved in the siting process of large important projects, for example, dams and nuclear power plants, continued to challenge the map(s). The second edition map was completed in 1985 incorporating more faults, improving MCE??s estimation method, and using new ground motion attenuation relationships from the latest published results at that time. CDMG eventually published the second edition map in 1992 following the Governor??s Board of Inquiry on the 1989 Loma Prieta earthquake and at the demand of Caltrans. The third edition map was published by Caltrans in 1996 utilizing GIS technology to manage data that includes a simplified three-dimension geometry of faults and to facilitate efficient corrections and revisions of data and the map. The spatial relationship of fault hazards with highways, bridges or any other attribute can be efficiently managed and analyzed now in GIS at Caltrans. There has been great confidence in using DSHA in bridge engineering and other applications in California, and it can be confidently applied in any other earthquake-prone region. Earthquake hazards defined by DSHA are: (1) transparent and stable with robust MCE moment magnitudes; (2) flexible in their application to design considerations; (3) can easily incorporate advances in ground motion simulations; and (4) economical. DSHA and neo-DSHA have the same approach and applicability. The accuracy of DSHA has proven to be quite reasonable for practical applications within engineering design and always done with professional judgment. In the final analysis, DSHA is a reality-check for public safety and PSHA results. Although PSHA has been acclaimed as a better approach for seismic hazard assessment, it is DSHA, not PSHA, that has actually been used in seismic hazard assessment for building and bridge engineering, particularly in California.  相似文献   

14.
李昌珑  徐伟进  吴健  高孟潭 《地震学报》2015,37(6):1024-1036
本文介绍了特征地震的对数正态分布模型、 正态分布模型和布朗过程时间模型, 提出了使用地震破裂面源模型的特征地震含时间的概率地震危险性分析理论和方法. 通过具体算例对不同的特征地震模型进行了比较, 并对特征地震危险性分析方法进行了系统探索. 研究结果表明, 特征地震含时间模型在复发周期早期的地震危险性低于不含时间模型, 而在后期其地震危险性则高于不含时间模型. 特征地震复发周期的对数正态分布模型与布朗过程时间模型计算得出的地震危险性差别不大. 在未到期望复发时间时, 正态分布模型与前两种模型计算的地震危险性差别不大; 而接近期望复发时间及之后时段, 正态分布模型计算的地震危险性则迅速增大.   相似文献   

15.
A probabilistic seismic hazard assessment of the Province of Murcia in terms of peak ground acceleration (PGA) and spectral accelerations [SA(T)] is presented in this paper. In contrast to most of the previous studies in the region, which were performed for PGA making use of intensity-to-PGA relationships, hazard is here calculated in terms of magnitude and using European spectral ground-motion models. Moreover, we have considered the most important faults in the region as specific seismic sources, and also comprehensively reviewed the earthquake catalogue. Hazard calculations are performed following the Probabilistic Seismic Hazard Assessment (PSHA) methodology using a logic tree, which accounts for three different seismic source zonings and three different ground-motion models. Hazard maps in terms of PGA and SA(0.1, 0.2, 0.5, 1.0 and 2.0 s) and coefficient of variation (COV) for the 475-year return period are shown. Subsequent analysis is focused on three sites of the province, namely, the cities of Murcia, Lorca and Cartagena, which are important industrial and tourism centres. Results at these sites have been analysed to evaluate the influence of the different input options. The most important factor affecting the results is the choice of the attenuation relationship, whereas the influence of the selected seismic source zonings appears strongly site dependant. Finally, we have performed an analysis of source contribution to hazard at each of these cities to provide preliminary guidance in devising specific risk scenarios. We have found that local source zones control the hazard for PGA and SA(T ≤ 1.0 s), although contribution from specific fault sources and long-distance north Algerian sources becomes significant from SA(0.5 s) onwards.  相似文献   

16.
The Wenchuan earthquake of 12 May 2008 is the most destructive earthquake in China in the past 30 years in terms of property damage and human losses. In order to understand the earthquake process and the geo-morphological factors affecting the seismic hazard, we simulated the strong ground motion caused by the earthquake, incorporating three-dimensional (3D) earth structure, finite-fault rupture, and realistic surface topography. The simulated ground motions reveal that the fault rupture and basin structure control the overall pattern of the peak ground shaking. Large peak ground velocity (PGV) is distributed in two narrow areas: one with the largest PGV values is above the hanging wall of the fault and attributed to the locations of fault asperities and rupture directivity; the other is along the northwestern margin of the Sichuan Basin and caused by both the directivity of fault rupture and the amplification in the thick sediment basin. Rough topography above the rupture fault causes wave scattering, resulting in significantly larger peak ground motion on the apex of topographic relief than in the valley. Topography and scattering also reduce the wave energy in the forward direction of fault rupture but increase the PGV in other parts of the basin. These results suggest the need for a localized hazard assessment in places of rough topography that takes the topographic effects into account. Finally, had the earthquake started at the northeast end of the fault zone and ruptured to the southwest, Chengdu would have suffered a much stronger shaking than it experienced on 12 May, 2008. Supported by the U.S. National Science Foundation (Grant Nos. EAR 0738779 and OCE 0727919), the National Basic Research Program of China (Grant No. 2004CB418404), and partially by the National Nature Science Foundation of China (Grant No. 40521002)  相似文献   

17.
A unified probabilistic seismic hazard assessment (PSHA) for the Pyrenean region has been performed by an international team composed of experts from Spain and France during the Interreg IIIA ISARD project. It is motivated by incoherencies between the seismic hazard zonations of the design codes of France and Spain and by the need for input data to be used to define earthquake scenarios. A great effort was invested in the homogenisation of the input data. All existing seismic data are collected in a database and lead to a unified catalogue using a local magnitude scale. PSHA has been performed using logic trees combined with Monte Carlo simulations to account for both epistemic and aleatory uncertainties. As an alternative to hazard calculation based on seismic sources zone models, a zoneless method is also used to produce a hazard map less dependant on zone boundaries. Two seismogenic source models were defined to take into account the different interpretations existing among specialists. A new regional ground-motion prediction equation based on regional data has been proposed. It was used in combination with published ground-motion prediction equations derived using European and Mediterranean data. The application of this methodology leads to the definition of seismic hazard maps for 475- and 1,975-year return periods for spectral accelerations at periods of 0 (corresponding to peak ground acceleration), 0.1, 0.3, 0.6, 1 and 2 s. Median and percentiles 15% and 85% acceleration contour lines are represented. Finally, the seismic catalogue is used to produce a map of the maximum acceleration expected for comparison with the probabilistic hazard maps. The hazard maps are produced using a grid of 0.1°. The results obtained may be useful for civil protection and risk prevention purposes in France, Spain and Andorra.  相似文献   

18.
The Wenchuan earthquake of 12 May 2008 is the most destructive earthquake in China in the past 30 years in terms of property damage and human losses. In order to understand the earthquake process and the geo-morphological factors affecting the seismic hazard, we simulated the strong ground mo-tion caused by the earthquake, incorporating three-dimensional (3D) earth structure, finite-fault rupture, and realistic surface topography. The simulated ground motions reveal that the fault rupture and basin structure control the overall pattern of the peak ground shaking. Large peak ground velocity (PGV) is distributed in two narrow areas: one with the largest PGV values is above the hanging wall of the fault and attributed to the locations of fault asperities and rupture directivity; the other is along the north-western margin of the Sichuan Basin and caused by both the directivity of fault rupture and the ampli-fication in the thick sediment basin. Rough topography above the rupture fault causes wave scattering, resulting in significantly larger peak ground motion on the apex of topographic relief than in the valley. Topography and scattering also reduce the wave energy in the forward direction of fault rupture but increase the PGV in other parts of the basin. These results suggest the need for a localized hazard as-sessment in places of rough topography that takes the topographic effects into account. Finally, had the earthquake started at the northeast end of the fault zone and ruptured to the southwest, Chengdu would have suffered a much stronger shaking than it experienced on 12 May, 2008.  相似文献   

19.
Depths of earthquake occurrence and large slip distribution are critical for seismic hazard assessment.Numerous examples show that earthquakes with similar magnitudes,however,can result in significantly different ground shaking and damage.One of the critical factors is that whether the large slip was generated near the ground surface.In this article,we reviewed two aspects that are important on this regard,shallow slip deficit and nucleation depth.Understanding how shallow future earthquakes may nucleate in particular regions,such as shale gas fields,is critical for hazard assessment.Whether or not a strong earthquake may slip significantly at shallow depths(less than 3 km)plays crucial rules in seismic hazard preparation and should be further investigated by integrating high-resolution fault zone observations,dynamic rupture simulation,and fault zone properties.Moreover,precisely resolving shallow depth and slip distribution of earthquakes demands InSAR and/or other image data that can better capture the near-fault deformation to constrain the source parameters of earthquakes.  相似文献   

20.
Uncertainty Analysis and Expert Judgment in Seismic Hazard Analysis   总被引：1，自引：0，他引：1  
The large uncertainty associated with the prediction of future earthquakes is usually regarded as the main reason for increased hazard estimates which have resulted from some recent large scale probabilistic seismic hazard analysis studies (e.g. the PEGASOS study in Switzerland and the Yucca Mountain study in the USA). It is frequently overlooked that such increased hazard estimates are characteristic for a single specific method of probabilistic seismic hazard analysis (PSHA): the traditional (Cornell?CMcGuire) PSHA method which has found its highest level of sophistication in the SSHAC probability method. Based on a review of the SSHAC probability model and its application in the PEGASOS project, it is shown that the surprising results of recent PSHA studies can be explained to a large extent by the uncertainty model used in traditional PSHA, which deviates from the state of the art in mathematics and risk analysis. This uncertainty model, the Ang?CTang uncertainty model, mixes concepts of decision theory with probabilistic hazard assessment methods leading to an overestimation of uncertainty in comparison to empirical evidence. Although expert knowledge can be a valuable source of scientific information, its incorporation into the SSHAC probability method does not resolve the issue of inflating uncertainties in PSHA results. Other, more data driven, PSHA approaches in use in some European countries are less vulnerable to this effect. The most valuable alternative to traditional PSHA is the direct probabilistic scenario-based approach, which is closely linked with emerging neo-deterministic methods based on waveform modelling.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号