共查询到20条相似文献，搜索用时 796 毫秒
1.
地震危险性分析中的不确定性处理和表征,一直是核电厂厂址地震安全性评价中倍受关注的重要问题,尤其是日本福岛核事故后,无论是确定核电厂厂址的设计基准地震动,还是进行核电厂地震风险评价,都更加重视地震危险性分析中的不确定性.本文通过理论分析重点说明了衰减关系的不确定性,包括标准差和截断水平对核电厂地震安全性评价的影响,并在此基础上,通过算例和讨论说明了概率性方法截断水平的选取问题,探讨了现行确定性方法和概率性方法在截断水平选取上的差异.分析计算结果表明,在地震活动较弱的区域,概率性方法截断水平为3,确定性方法截断水平为0的现行做法是恰当的.但是,对于发震构造大震复发间隔较小的区域,为了使二者在超越概率方面协调,恰当提高确定性方法的截断水平更为合理. 相似文献
2.
管道抗震设计规范有关地震作用的综述 总被引：2，自引：0，他引：2
本文通过介绍中国、日本、美国、英国、挪威的相关管道抗震规范,阐述了目前管道应变设计和性能设计的理念、方法以及对地震作用输入的要求。通过比较各国管道抗震设计规范,保证震后管道维持其服务功能的抗震设计理念已经得到了全世界范围的认可。现在的管道设计正向性能设计的方向发展,并提出了两级抗震设防的方法。其中,第二级以管道不发生泄漏为抗震设防目标,对管道的地震安全性评价工作提出了更高的要求,管道设计需要的地震动和地面永久变形参数也越来越多。在目前管道工程的地震安全性评价工作中,存在概率方法和确定性方法这两种方法并举的局面。针对管道的抗液化和滑坡设计,地面永久位移可以利用分解的地震安全性评价概率方法得到。针对管道的抗断设计,断层未来位错量的估计方法现在仍以确定性方法为主,概率方法因为断层位错量沿着破裂带的分布较为复杂仍有待进一步研究。 相似文献
3.
Seismic Hazard Assessment: Issues and Alternatives 总被引：3，自引：0，他引：3
Zhenming Wang 《Pure and Applied Geophysics》2011,168(1-2):11-25
Seismic hazard and risk are two very important concepts in engineering design and other policy considerations. Although seismic hazard and risk have often been used interchangeably, they are fundamentally different. Furthermore, seismic risk is more important in engineering design and other policy considerations. Seismic hazard assessment is an effort by earth scientists to quantify seismic hazard and its associated uncertainty in time and space and to provide seismic hazard estimates for seismic risk assessment and other applications. Although seismic hazard assessment is more a scientific issue, it deserves special attention because of its significant implication to society. Two approaches, probabilistic seismic hazard analysis (PSHA) and deterministic seismic hazard analysis (DSHA), are commonly used for seismic hazard assessment. Although PSHA has been proclaimed as the best approach for seismic hazard assessment, it is scientifically flawed (i.e., the physics and mathematics that PSHA is based on are not valid). Use of PSHA could lead to either unsafe or overly conservative engineering design or public policy, each of which has dire consequences to society. On the other hand, DSHA is a viable approach for seismic hazard assessment even though it has been labeled as unreliable. The biggest drawback of DSHA is that the temporal characteristics (i.e., earthquake frequency of occurrence and the associated uncertainty) are often neglected. An alternative, seismic hazard analysis (SHA), utilizes earthquake science and statistics directly and provides a seismic hazard estimate that can be readily used for seismic risk assessment and other applications. 相似文献
4.
Modern earthquake loss models make use of earthquake catalogs relevant to the seismic hazard assessment upon seismicity and seismotectonic analysis. The main objective of this paper is to investigate a recently compiled catalog (National Institute of Meteorology or INM catalog: 412-2011) and to generate seismic hazard maps through classical probabilistic seismic hazard assessment (PSHA) and smoothed-gridded seismicity models for Tunisia. It is now established with the local earthquake bulletin that the recent seismicity of Tunisia is sparse and moderate. Therefore, efforts must be undertaken to elaborate a robust hazard analysis for risk assessment and seismic design purposes. These recommendations follow the recently published reports by the World Bank that describe the seismic risk in Tunis City as being beyond a tolerable level with an MSK intensity level of VII. Some attempts were made during the past two decades to assess the seismic hazard for Tunisia and they have mostly failed to properly investigate the historical and instrumental seismicity catalog. This limitation also exists for the key aspect of epistemic and random uncertainties impact on the final seismic hazard assessment. This study also investigates new ground motion prediction equations suitable for use in Tunisia. The methodology applied herein uses, for the first time in PSHA of Tunisia, seismicity parameters integrated in logic tree framework to capture epistemic uncertainties through three different seismic source models. It also makes use of the recently released version of OpenQuake engine; an open-source tool for seismic hazard and risk assessment developed in the framework of the Global Earthquake Model. 相似文献
5.
Domenico Giardini Laurentiu Danciu Mustafa Erdik Karin Şeşetyan Mine B. Demircioğlu Tümsa Sinan Akkar Levent Gülen Mehdi Zare 《Bulletin of Earthquake Engineering》2018,16(8):3567-3570
The collaborative project Earthquake Model of the Middle East (EMME, 2010–2015) brought together scientists and engineers from the leading research institutions in the region and delivered state-of-the-art seismic hazard assessment covering Afghanistan, Armenia, Azerbaijan, Cyprus, Georgia, Iran, Iraq, Jordan, Lebanon, Palestine, Pakistan, Syria and Turkey. Their efforts have been materialized in the first homogenized seismic hazard model comprising earthquake catalogues, mapped active faults, strong motions databank, ground motion models and the estimated ground motion values for various intensity measure types and relevant return periods (e.g. 475–5000 years). The reference seismic hazard map of the Middle East, depicts the mean values of peak ground acceleration with a 10% chance of exceedance in 50 years, corresponding to a mean return period of 475 years. A full resolution poster is provided with this contribution. 相似文献
6.
Christophe Martin Gabriele Ameri David Baumont David Carbon Gloria Senfaute Jean-Michel Thiry Ezio Faccioli Jean Savy 《Bulletin of Earthquake Engineering》2018,16(6):2477-2511
The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods. 相似文献
7.
计算机仿真模拟设定地震断层动态破裂传播和近断层强地表运动响应的结果表明， 对于特征地震而言，近断层附近的地表运动特征与断层破裂传播的方向性有着强烈的依赖关系. 当场地（观测点）至断层的距离给定时，正向于破裂传播方向的场地（场地A）的地表质点运动（位移、速度、加速度），远远大于震中附近（场地B）和反向于破裂传播方向的场地（场地C）的地表质点运动，而且沿断层垂直分量所辐射的SH波的传播起到了主导作用. 对应于场地A，B和C，统计分析结果表明，峰值加速度的几何平均值之比为2.15:1.5:1， 而且各自的均方差分别为0.12, 0.11和0.13. 如果将所得的研究结果应用于概率地震危险性分析中，对于较低的年超越频度，近断层附近的地表峰值加速度的估算值可下降15%~30%. 因此，考虑到断层破裂传播方向性对地表运动的影响，区域衰减曲线的回归分析模型应该给予恰当的修正. 相似文献
8.
Development of attenuation relation for the near fault ground motion from the characteristic earthquake 总被引：1，自引：0，他引：1
A composite source model has been used to simulate a broadband strong ground motion with an associated fault rupture process. A scenario earthquake fault model has been used to generate 1 000 earthquake events with a magni-tude of Mw8.0. The simulated results show that, for the characteristic event with a strike-slip faulting, the character istics of near fault ground motion is strongly dependent on the rupture directivity. If the distance between the sites and fault was given, the ground motion in the forward direction (Site A) is much larger than that in the backward direction (Site C) and that close to the fault (Site B). The SH waves radiated from the fault, which corresponds to the fault-normal component plays a key role in the ground motion amplification. Corresponding to the sites A, B, and C, the statistical analysis shows that the ratio of their aPG is 2.15:1.5:1 and their standard deviations are about 0.12, 0.11, and 0.13, respectively. If these results are applied in the current probabilistic seismic hazard analysis (PSHA), then, for the lower annual frequency of exceedance of peak ground acceleration, the predicted aPG from the hazard curve could reduce by 30% or more compared with the current PSHA model used in the developing of seismic hazard map in the USA. Therefore, with a consideration of near fault ground motion caused by the rupture directivity, the regression model used in the development of the regional attenuation relation should be modified accordingly. 相似文献
9.
新版地震区划图地震活动性模型与参数确定 总被引：11，自引：4，他引：7
地震活动性模型和地震动预测模型是概率地震危险性分析的两个核心。在新版地震区划图中,依据板内地震活动空间不均匀性分布的特点,在概率地震危险性分析方法(CPSHA)中采用了由地震统计区、背景潜在震源区和构造潜在震源区构成的三级层次性潜在震源区模型,并构建了相应的地震活动性模型。本文在论述CPSHA方法及其地震活动性模型基本概念的基础上,重点介绍了新版地震区划图地震活动性模型的三级潜在震源区模型的构成、地震活动性假定和基本特点,同时,也对新版地震区划图地震活动性模型的重要参数确定思路、方法与结果进行了介绍。本文将为更好地认识与理解我国新版地震动参数区划图提供有益的参考。 相似文献
10.
地震危险性概率分析(PSHA)是目前最广泛应用于地震灾害与风险性评估的方法。然而它在计算中却存在着一个错误:把强地面运动衰减关系(一个函数)的条件超越概率等同于强地面运动误差(一个变量)的超越概率。这个错误导致了运用强地面运动误差(空间分布特征)去外推强地面运动的发生(时间分布特征)或称之为遍历性假设,同时也造成了对PSHA理解和应用上的困难。本文推导出新的灾害计算方法(称之为KY-PSHA)来纠正这种错误。 相似文献
11.
随机有限断层法合成地震动的研究与应用 总被引：6，自引：1，他引：6
目前很多研究者采用随机有限断层模型预测地震动并被证明是可行的.本文运用随机有限断层地震动叠加合成方法,模拟了1988年肃南5.7级地震,与实际记录进行对比分析,发现：用有限断层方法模拟得到的峰值加速度以及峰值加速度出现所对应的特征时刻与真实记录较为吻合;比较模拟的地震动反应谱和实际记录的加速度反应谱,总体上在工程感兴趣的频段内,有限断层方法拟合的结果基本能满足实际工作的需要.为进一步开拓该方法在工程应用中的前景,以兰州市柴家峡水电站为例,将此理论方法应用于缺乏强震记录地区的近场地震动估计中,模拟分析了马衔山北缘活动断裂发震时在坝址区产生的地震动特征,其近场合成结果与1125年兰州7.0级地震的烈度分布符合较好,可供工程抗震设计参考使用. 相似文献
12.
In this paper the effect of causal parameter bounds (e.g. magnitude, source‐to‐site distance, and site condition) on ground motion selection, based on probabilistic seismic hazard analysis (PSHA) results, is investigated. Despite the prevalent application of causal parameter bounds in ground motion selection, present literature on the topic is cast in the context of a scenario earthquake of interest, and thus specific bounds for use in ground motion selection based on PSHA, and the implications of such bounds, is yet to be examined. Thirty‐six PSHA cases, which cover a wide range of causal rupture deaggregation distributions and site conditions, are considered to empirically investigate the effects of various causal parameter bounds on the characteristics of selected ground motions based on the generalized conditional intensity measure (GCIM) approach. It is demonstrated that the application of relatively ‘wide’ bounds on causal parameters effectively removes ground motions with drastically different characteristics with respect to the target seismic hazard and results in an improved representation of the target causal parameters. In contrast, the use of excessively ‘narrow’ bounds can lead to ground motion ensembles with a poor representation of the target intensity measure distributions, typically as a result of an insufficient number of prospective ground motions. Quantitative criteria for specifying bounds for general PSHA cases are provided, which are expected to be sufficient in the majority of problems encountered in ground motion selection for seismic demand analyses. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
13.
This paper presents a proposed method of aftershock probabilistic seismic hazard analysis (APSHA) similar to conventional ‘mainshock’ PSHA in that it estimates the likelihoods of ground motion intensity (in terms of peak ground accelerations, spectral accelerations or other ground motion intensity measures) due to aftershocks following a mainshock occurrence. This proposed methodology differs from the conventional mainshock PSHA in that mainshock occurrence rates remain constant for a conventional (homogeneous Poisson) earthquake occurrence model, whereas aftershock occurrence rates decrease with increased elapsed time from the initial occurrence of the mainshock. In addition, the aftershock ground motion hazard at a site depends on the magnitude and location of the causative mainshock, and the location of aftershocks is limited to an aftershock zone, which is also dependent on the location and magnitude of the initial mainshock. APSHA is useful for post‐earthquake safety evaluation where there is a need to quantify the rates of occurrence of ground motions caused by aftershocks following the initial rupture. This knowledge will permit, for example, more informed decisions to be made for building tagging and entry of damaged buildings for rescue, repair or normal occupancy. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
14.
Site specific probabilistic seismic hazard analysis at Dubai Creek on the west coast of UAE 总被引：2，自引：1，他引：1
Ayman A. Shama 《地震工程与工程振动(英文版)》2011,10(1):143-152
A probabilistic seismic hazard analysis (PSHA) was conducted to establish the hazard spectra for a site located at Dubai Creek on the west coast of the United Arab Emirates (UAE). The PSHA considered all the seismogenic sources that affect the site, including plate boundaries such as the Makran subduction zone, the Zagros fold-thrust region and the transition fault system between them; and local crustal faults in UAE. PSHA indicated that local faults dominate the hazard. The peak ground acceleration (PGA) for the 475-year return period spectrum is 0.17 g and 0.33 g for the 2,475-year return period spectrum. The hazard spectra are then employed to establish rock ground motions using the spectral matching technique. 相似文献
15.
A representation of seismic hazard is proposed for Italy based on the zone-free approach developed by Woo (BSSA 86(2):353–362, 1996a), which is based on a kernel estimation method governed by concepts of fractal geometry and self-organized seismicity, not requiring the definition of seismogenic zoning. The purpose is to assess the influence of seismogenic zoning on the results obtained for the probabilistic seismic hazard analysis (PSHA) of Italy using the standard Cornell’s method. The hazard has been estimated for outcropping rock site conditions in terms of maps and uniform hazard spectra for a selected site, with 10 % probability of exceedance in 50 years. Both spectral acceleration and spectral displacement have been considered as ground motion parameters. Differences in the results of PSHA between the two methods are compared and discussed. The analysis shows that, in areas such as Italy, characterized by a reliable earthquake catalog and in which faults are generally not easily identifiable, a zone-free approach can be considered a valuable tool to address epistemic uncertainty within a logic tree framework. 相似文献
16.
Mine Betül Demircioğlu Karin Şeşetyan Tamer Y. Duman Tolga Çan Senem Tekin Semih Ergintav 《Bulletin of Earthquake Engineering》2018,16(8):3399-3438
Over the years, several local and regional seismic hazard studies have been conducted for the estimation of the seismic hazard in Turkey using different statistical processing tools for instrumental and historical earthquake data and modeling the geologic and tectonic characteristics of the region. Recently developed techniques, increased knowledge and improved databases brought the necessity to review the national active fault database and the compiled earthquake catalogue for the development of a national earthquake hazard map. A national earthquake strategy and action plan were conceived and accordingly with the collaboration of the several institutions and expert researchers, the Revision of Turkish Seismic Hazard Map Project (UDAP-Ç-13-06) was initiated, and finalized at the end of 2014. The scope of the project was confined to the revision of current national seismic hazard map, using the state of the art technologies and knowledge of the active fault, earthquake database, and ground motion prediction equations. The following two seismic source zonation models are developed for the probabilistic earthquake hazard analysis: (1) Area source model, (2) Fault and spatial smoothing seismic source model (FSBCK). In this study, we focus on the development and the characterization of the Fault Source model, the background spatially smoothed seismicity model and intrinsic uncertainty on the earthquake occurrence-rates-estimation. Finally, PSHA results obtained from the fault and spatial smoothed seismic source model are presented for 43, 72, 475 and 2475 years return periods (corresponding to 69, 50, 10, and 2% probability of exceedance in 50 years) for PGA and 5% damped spectral accelerations at 0.2 and 1.0 s. 相似文献
17.
中强地震活动区地震动衰减关系的确定 总被引：3，自引：0，他引：3
地震动衰减关系是影响地震安全性评价特别是地震区划结果的重要因素.我国现行的地震动衰减关系主要是依据6级以上地震的地面运动资料得到的,并没有考虑中强地震的衰减特性.为此,文中利用现有的烈度资料和其他可供参考的研究成果来建立我国中强地震活动区的地震动衰减关系.收集了我国华中、华南、东北等地区的51次地震的烈度等震线资料,运用单随机变量加权最小二乘回归法得到中强地震活动区烈度衰减关系.然后以美国西部地区为参考地区,运用缺乏地震动参数的地震动估计方法-地震对映射法得到中强地震活动区峰值加速度和有效峰值加速度衰减关系.最后,通过与我国强地震区和中强地震区已有的烈度衰减关系和地震动衰减关系的对比,验证了得出的我国中强地震活动区烈度衰减关系和地震动衰减关系的合理性. 相似文献
18.
Kevin McCue 《Bulletin of Earthquake Engineering》2014,12(1):111-125
Through his students, Professor Nick Ambraseys has had a strong impact on the introduction of earthquake engineering practices in Australia, including historical earthquake studies, strong motion instrumentation and analysis, foundation studies including liquefaction, and building code formulation. In Australia the process of upgrading the third and current edition of the earthquake code and hazard map has begun. There are now about 150 digital strong motion recorders installed in cities, on major structures and at Australian National Seismograph Network sites. Three volumes of an isoseismal atlas have been published totalling more than 300 maps, mainly historical earthquakes. Significant progress has been made in paleoseismological studies across the continent, adding to the complexity of the intraplate seismicity model. With time and more installed accelerographs, the peak ground acceleration recorded in Australia has increased from .25 g in 1984 to .5 g in 1988 and 1 g in 1994, all from earthquakes smaller than magnitude 5, supporting Ambraseys contention that PGA alone is not a suitable parameter for a design ground motion. 相似文献
19.
Shaukat A. Khan Kypros Pilakoutas Iman Hajirasouliha Reyes Garcia Maurizio Guadagnini 《地震工程与工程振动(英文版)》2018,17(4):787-804
Modern Earthquake Risk Assessment (ERA) methods usually require seismo-tectonic information for Probabilistic Seismic Hazard Assessment (PSHA) that may not be readily available in developing countries. To bypass this drawback, this paper presents a practical event-based PSHA method that uses instrumental seismicity, available historical seismicity, as well as limited information on geology and tectonic setting. Historical seismicity is integrated with instrumental seismicity to determine the long-term hazard. The tectonic setting is included by assigning seismic source zones associated with known major faults. Monte Carlo simulations are used to generate earthquake catalogues with randomized key hazard parameters. A case study region in Pakistan is selected to demonstrate the effectiveness of the method. The results indicate that the proposed method produces seismic hazard maps consistent with previous studies, thus being suitable for generating such maps in regions where limited data are available. The PSHA procedure is developed as an integral part of an ERA framework named EQRAM. The framework is also used to determine seismic risk in terms of annual losses for the study region. 相似文献
20.
Probabilistic seismic hazard analysis: Early history 总被引：1，自引：0，他引：1
Robin K. McGuire 《地震工程与结构动力学》2008,37(3):329-338
Probabilistic seismic hazard analysis (PSHA) is the evaluation of annual frequencies of exceedence of ground motion levels (typically designated by peak ground acceleration or by spectral accelerations) at a site. The result of a PSHA is a seismic hazard curve (annual frequency of exceedence vs ground motion amplitude) or a uniform hazard spectrum (spectral amplitude vs structural period, for a fixed annual frequency of exceedence). Analyses of this type were first conceived in the 1960s and have become the basis for the seismic design of engineered facilities ranging from common buildings designed according to building codes to critical facilities such as nuclear power plants. This Historical Note traces the early history of PSHA. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献