首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 26 毫秒
1.
Carl T.F. Ross   《Ocean Engineering》2005,32(1):1281-99
The paper presents a conceptual design of an underwater missile launcher, which will be more difficult to detect by the enemy than conventional surface missile launchers which are currently being used.The paper suggests that the material of construction should be a composite and not a metal, as use of the latter for a large deep diving underwater vessel will result in such a structure sinking like a stone, due to the fact that it will have no reserve buoyancy. The paper also shows that composites have better sound absorption characteristics, thereby making the underwater structure difficult to detect through sonar equipment. It is proposed that this launcher should operate up to a depth of 5000 m, as at this depth, some 60% of the oceans' bottoms can be reached.The author shows that current technology can be used to construct and operate such a vessel.  相似文献   

2.
针对含有粗差的起始数据导致的错误碎部点成果,对粗差产生的途径进行了分析,给出了进行改正计算的必备条件,最后结合实际例子进行了计算验证。结果表明改正计算方法在理论上是严密的,在实际工作中也具有可操作性。  相似文献   

3.
Wen-Hui Cheng   《Ocean Engineering》2005,32(3-4):499-512
The purpose of the current study is to introduce a set of mobile underwater positioning systems (MUPS) that will enable non-offshore vessels to execute underwater missions. Besides mobility, the system would also possess the advantage of having to use fewer acoustic instruments than conventional acoustic positioning systems. The method adopted by the system will involve the use of expendable and multi-functional bathythermographs (XBT) to measure the underwater acoustic speed and the depth of water at the same time. Then it must utilize the geometric relations formed by measuring the position of underwater targets at set intervals during navigation. In addition, since sound does not travel in a straight line when underwater, the iteration and convergence method must be used to perform corrections on the transmission speed and positional errors to obtain an accurate coordinate of the underwater target. After simulation testing, the positioning system established by the current study has proven to be fast in converging the error values along with high positioning accuracy of the system. The results of the study indicate that the MUPS built by the research institute can be utilized on a vessel, and will be very helpful in assisting the management of urgent underwater positioning missions.  相似文献   

4.
双功能潜水器是目前国际上比较新型的可用于深海水下观察和作业的装备。既可有缆载人/无人,又可无缆载人。该潜水器最大工作深度450m,其结构材料和结构形式与以往类似的装备不同。文章对双功能潜水器耐压壳结构和载体框架设计中的一些问题进行了探讨,提出的设计思想和计算方法,这对获得一个具有最轻结构重量的实用的双功能潜水器结构具有指导意义。  相似文献   

5.
科考船定点作业时会受到海洋风、涌、浪、流等外界环境因素影响,导致工作效率降低,原位测量精度下降,甚至影响作业安全。动力定位系统 (DP) 具有自动定位功能,能够抵抗外界环境因素的影响,可实现科考船高精度定点控位。 单波束测深仪不仅可以测量水深,也可反映水下设备深度信息,可以起到辅助监控水下设备功能。本文在介绍定点作业施工现状与局限性的基础上,分析 DP 系统与单波束测深仪工作原理,以“向阳红 01”船为载体,在定点作业时开启 DP 系统与单波束测深仪,发现该方法可以提高科考船定点作业工作效率、原位测量精度并保障作业安全,可为其他科考船定点作业提供参考。  相似文献   

6.
This paper addresses the problem of simultaneous depth tracking and attitude control of an underwater towed vehicle. The system proposed uses a two-stage towing arrangement that includes a long primary cable, a gravitic depressor, and a secondary cable. The towfish motion induced by wave driven disturbances in both the vertical and horizontal planes is described using an empirical model of the depressor motion and a spring-damper model of the secondary cable. A nonlinear, Lyapunov-based, adaptive output feedback control law is designed and shown to regulate pitch, yaw, and depth tracking errors to zero. The controller is designed to operate in the presence of plant parameter uncertainty. When subjected to bounded external disturbances, the tracking errors converge to a neighbourhood of the origin that can be made arbitrarily small. In the implementation proposed, a nonlinear observer is used to estimate the linear velocities used by the controller thus dispensing with the need for costly sensor suites. The results obtained with computer simulations show that the controlled system exhibits good performance about different operating conditions when subjected to sea-wave driven disturbances and in the presence of sensor noise. The system holds promise for application in oceanographic missions that require depth tracking or bottom-following combined with precise vehicle attitude control.  相似文献   

7.
This article studies the application of the alternating current field measurement (ACFM) method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect detection in seawater environment. Finite element simulation is performed to investigate rules and characteristics of the electromagnetic signal distribution in the defected area. In respect of the simulation results, underwater artificial crack detection experiments are designed and conducted for the ACFM system. The experiment results show that the ACFM system can detect cracks in underwater structures and the detection accuracy is higher than 85%. This can meet the engineering requirement of underwater structure defect detection. The results in this article can be applied to establish technical foundation for the optimization and development of ACFM based underwater structure defects detection system.  相似文献   

8.
基于模糊神经网络理论对水下拖曳体进行深度轨迹控制   总被引:2,自引:0,他引:2  
以华南理工大学开发的自主稳定可控制水下拖曳体为研究对象,首先通过水下拖曳体在拖曳水池样机中的试验取得试验数据后作为训练样本,采用LM BP算法,建立基于神经网络理论构建的可控制水下拖曳体轨迹与姿态水动力的数值模型。在此基础上设计了一个控制系统,它主要由两部分组成:基于遗传算法的神经网络辨识器和基于模拟退火改进的遗传算法的模糊神经网络控制器。以满足预先设定的拖曳体水下监测轨迹要求为控制依据,由控制系统确定为达到所要求的运动轨迹而应采用的迫沉水翼转角,以此作为输入参数,通过LM BP神经网络模型的模拟计算预报在这一操纵动作控制下的拖曳体所表现的轨迹与姿态特征。数值模拟计算结果表明:该系统的设计达到了所要求的目的;借助这一系统,可以有效地实现对拖曳体的深度轨迹控制。  相似文献   

9.
针对采用传统海洋测量手段难以获取危险及争议海区的水深和水下碍航物信息,提出了基于卫星遥感进行水深反演和水下碍航物探测的新思路。探讨了多光谱遥感水深反演的数据预处理方法、遥感水深反演模型的构建及水下碍航物遥感探测方法,并开展了相应的实验验证。实验表明,采用卫星遥感手段可以快速地获取测量船只不易到达海区的水深和水下碍航物信息,研究成果对海洋测绘技术的发展具有一定的指导意义和应用价值。  相似文献   

10.
Low-frequency electromagnetic methods are used in geophysical exploration to detect the magnetic field distortion between a transmitter and receiver produced by locally conductive bodies. Both ground and airborne systems are in current use. It is possible to similarly conduct underwater geophysical exploration by using an underwater towed source of electromagnetic radiation and a receiving magnetic or electric field detector. The receiver can be towed on an auxiliary cable, mounted on a boom on the towing platform, or land based. An underwater towed electromagnetic source suitable for ocean-bottom exploration has been constructed, and its underwater propagation characteristics at low frequency have been studied. This underwater calibrated source (UCS) is 4 m long, weighs 383 kg in air, and can produce vertical and horizontal magnetic dipoles and a horizontal electric dipole. Powered by a current-feedback-controlled, high-power, modified sonar amplifier, the UCS can produce 9710 ampereturn.m2 of magnetic dipole or 200 A.m of electric dipole at 50 A at frequencies up to 200 Hz without significant attenuation from coil inductance. This paper concentrates on the mechanical, hydrodynamic, and magnetic design details of the UCS and the electrical system, consisting of the high-current drive power system and the shipboard monitoring system for attitude and depth detectors.  相似文献   

11.
为实现长期、连续、定点、低成本的上层海洋垂直剖面要素的准实时观测,提出了一种以STM32单片机(microcontroller unit,MCU)为主控器、采用国产温盐深传感器(conductivity temperature depth,CTD)和声学多普勒剖面流速仪(acoustic doppler current profilers,ADCP)等仪器进行剖面观测、搭载铱星通信模块或其他通信设备、适用于近海和远海的低功耗水下升降式准实时通信潜标控制系统设计方案。介绍了潜标的结构组成、控制系统硬件和软件设计,以及服务器接收软件的设计;实现了基于无线双向通信的数据补发机制和对潜标的远程控制;提出了一种适用于霍尔无刷直流电机(hall brushless direct current motor,HBLDCM)的堵转保护方法。近海和远海试验表明,该型潜标可以实现海洋垂直剖面的连续观测和数据的准实时传输,验证了潜标控制系统设计方案的可行性与稳定性。  相似文献   

12.
由于海洋内部环境复杂多变,加之渔业捕捞作业范围和深度的逐步扩大,对水下监测平台的安全构成了极大威胁。而且,在水下平台的海上回收作业过程中,恶劣海况、海雾、海面光反射等不利因素无不给回收过程造成很大麻烦,一旦平台浮出海面后漂出视距范围,将面临丢失风险。文中借助北斗定位导航系统,结合压力检测电路,设计并实现了一种可用于水下平台意外出水报警、出水后实时定位的卫星定位信标机系统,经多次应用,证明性能稳定可靠。  相似文献   

13.
海水液压作业工具系统的研制   总被引:2,自引:0,他引:2  
介绍了一种以海水液压驱动的水下作业工具,分析了该系统的组成、工作原理、研制难点及解决方案。该工具系统能工作于300m以浅的海域,完成水下钢缆切断、船体和水下结构物表面的清刷、打磨等工作。  相似文献   

14.
水下滑翔机其通过集成生物、化学、物理传感器可以测量如温度、盐度、溶解氧等多种海洋基础水文要素,其利用卫星定位系统获得实际出水速度和理论出水模型获得理论出水速度之差可以计算深度平均流,。本文利用海翼水下滑翔机获得温盐场及卫星定位数据评估深度平均流,结果显示利用温盐场获得深度平均地转流与水下滑翔机获得深度平均流相关系数0.95,表明其流场的一致性,同时根据船载观测ADCP误差分析法估算深度平均流误差约为0.036 m/s。借助深度平均流可以估算绝对地转流,包括正压地转流和斜压地转流。在零动力面的假设下,我们选取了海翼号水下滑翔机在南海的一组实验对流量误差进行了评估。该实验为2019年1月3日-2月16日海翼号水下滑翔机自南向北穿越西沙群岛附近一个中尺度涡观测。观测结果表明,该中尺度涡为冷涡流核,在涡心以南,绝对地转流为东向流,最大流速约为0.48 m/s;涡心以北,绝对地转流为西向流,最大流速约为0.47 m/s,稍弱于南侧。受不均匀时空观测计划影响,本文未对流量做出估计。  相似文献   

15.
横向分辨率是多波束系统探测分辨率的主要决定因素,当进行水下目标探测时,其直接影响着探测极限深度的选择。探讨了顾及横向分辨率的水下目标探测极限深度的计算,并以SeaBeam3030型多波束系统为例,给出了等角和等距两种模式的极限深度计算方法,通过仿真计算与分析,验证了计算方法的有效性。结论表明:无论是等角还是等距模式,横向分辨率由中央向外分辨率逐渐增大,并且在等距模式下,探测目标在横向上边缘失真明显,数据不能用于成图。给出的顾及横向分辨率的极限深度计算方法,可为不同类型的多波束测深系统进行水下目标探测提供依据参考。  相似文献   

16.
Precise sound speed profile (SSP) information is critical when using sonar for underwater terrain navigation. Nevertheless, acquiring SSP information in real-time is difficult, especially in underwater navigation environment. To account for this problem, this paper presents an underwater navigation method that applies real-time SSP correction to the terrain measurements. The method uses a probe to measure the surface sound speed simultaneously. Meanwhile, redundancy of topographic measurement data is exploited to derive the equivalent SSP information. The acquired equivalent SSP is updated continuously with particle filter algorithm. The terrain measurements can be corrected in real-time with the equivalent SSP to improve the performance of underwater terrain navigation. By removing the impact of inaccurate SSP from the terrain measurements, the proposed method can achieve precise and robust underwater navigation result without using an underway-profiling instrument. Simulated results confirm the good performance of the proposed method.  相似文献   

17.
This paper describes a new framework for object detection and tracking of AUV including underwater acoustic data interpolation, underwater acoustic images segmentation and underwater objects tracking. This framework is applied to the design of vision-based method for AUV based on the forward looking sonar sensor. First, the real-time data flow (underwater acoustic images) is pre-processed to form the whole underwater acoustic image, and the relevant position information of objects is extracted and determined. An improved method of double threshold segmentation is proposed to resolve the problem that the threshold cannot be adjusted adaptively in the traditional method. Second, a representation of region information is created in light of the Gaussian particle filter. The weighted integration strategy combining the area and invariant moment is proposed to perfect the weight of particles and to enhance the tracking robustness. Results obtained on the real acoustic vision platform of AUV during sea trials are displayed and discussed. They show that the proposed method can detect and track the moving objects underwater online, and it is effective and robust.  相似文献   

18.
Reducing overall power consumption is core issue in low power, high sampling rate, large storage data loggers necessary for long-term underwater acoustics research and other applications. A low-power microprocessor MSP430 offers a solution for the development of long-term deployment remote systems. In this paper, we present a multi-MSP430, master-slave architecture to resolve the power limitation issue. The proposed design is scalable in nature. For every additional slave unit installed in the array, the data sampling and streaming rate can be increased proportionally. We demonstrate the advantages of this concept using a multi-channel underwater acoustic recorder with a 100 kHz sampling rate. The performance of the system is demonstrated by a field acoustic experiment in which the reflection coefficient of the seafloor is measured. The proposed architecture will be applicable to many underwater long-term deployment systems. With its flexibility in configuration and synchronization of multi-channel sampling, it also provides a simple architecture for the construction of hydrophone arrays.  相似文献   

19.
This paper describes a new framework for detection and tracking of underwater pipeline,which includes software system and hardware system.It is designed for vision system of AUV based on monocular CCD camera.First,the real-time data flow from image capture card is pre-processed and pipeline features are extracted for navigation.The region saturation degree is advanced to remove false edge point group after Sobel operation.An appropriate way is proposed to clear the disturbance around the peak point in the process of Hough transform.Second,the continuity of pipeline layout is taken into account to improve the efficiency of line extraction.Once the line information has been obtained,the reference zone is predicted by Kalman filter.It denotes the possible appearance position of the pipeline in the image.Kalman filter is used to estimate this position in next frame so that the information of pipeline of each frame can be known in advance.Results obtained on real optic vision data in tank experiment are displayed and discussed.They show that the proposed system can detect and track the underwater pipeline online,and is effective and feasible.  相似文献   

20.
混合驱动自主潜航器融合了自主潜航器机动灵活和水下滑翔机续航能力强的优点,针对自身携带能源有限的问题,对在两种工作模式下如何实现最大航行距离进行了研究.从航行过程中的能源消耗入手,得出航行距离与速度、电子设备功率等的关系,通过理论分析和仿真手段得出最大续航能力的实现方法.在螺旋桨驱动模式下,当以经济航速航行时,可以达到最大航行距离;在浮力驱动模式下,当以最大滑翔效率航行时,水平方向上的滑翔距离最大,并且水平方向上的滑翔距离随着剖面深度的增大而增大,当剖面深度大到一定程度之后,最大滑翔距离趋于恒定.该研究方法可为类似水下航行器电源管理系统的能源分配提供参考,也可为航行器外形的设计和传感器的选型提供理论指导.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号