共查询到20条相似文献，搜索用时 46 毫秒
1.
采用集中质量法研究了绷紧式系泊系统中系缆由于松弛-张紧过程产生的冲击张力。建立系泊缆绳离散的集中质量模型,对其独立单元进行受力分析并建立了单元的运动方程。给定缆绳上端点简谐激励,通过Ansys中的Aqwa模块,分析了缆绳的运动响应;针对缆绳运动响应过程中的三种状态进行了模拟计算,探讨了冲击张力产生的条件;研究了缆绳初始预张力、上端点激励幅值和频率、拖曳力系数、弹性模量以及单位长度质量对动态张力的影响。研究结果表明:这些影响因素不仅会影响缆绳动态张力的大小,也会对缆绳中的冲击张力产生一定的影响。 相似文献
2.
In order to design submarine optical-fiber cable, it is very important to clarify the cable tension and fiber elongation during laying because the fiber elongation allowance is very small. When submarine cable is being laid from a cable ship, cable weight in water plus such additional tension as bottom tension caused by the negative slack and tension due to ship motion work upon the cable [1]. Cable tension changes during laying were theoretically studied. This paper quantitatively clarifies bottom tension dependence at the touchdown point caused by the negative slack upon both water depth and ship velocity. It is shown that the shallower the water depth is and the faster the ship velocity is, the larger the bottom tension is. The theoretical bottom tension showed good agreement with the experimental value measured during sea trials on laying submarine optical-fiber cable [2], [3]. This paper also describes the correlation between cable, ship motion, and cable tension vibration by examining experimental results. It quantitatively clarifies the tension vibration magnitude. 相似文献
3.
The suction anchor has been widely used in taut or semi-taut mooring systems as an effective and economical solution to anchoring problems. To ensure high reliability, the profile of the mooring cable connecting the fairlead and the pad-eye must be accurately designed. However, previous studies have rarely considered the effect of cable slippage in soil on the mooring behavior, or embedded cables have been studied with an assumed tension at the seabed. This paper, by treating the cable suspended in water and the cable embedded in soil as a single cable, presents a two-dimensional (2D) static model and a three-dimensional (3D) quasi-static model for the cable during pretensioning and in service, respectively. The two models take into account the comprehensive effects of ocean currents, soil resistance and cable elasticity, all of which are critical for the design of a mooring system. Three examples are analyzed using the models and some useful conclusions are drawn. 相似文献
4.
Free vibrations of three-dimensional extensible marine cables with specified top tension via a variational method 总被引：1，自引：0，他引：1
This paper presents a model formulation that can be used for analyzing the three-dimensional vibration behaviours of an inclined extensible marine cable. The virtual work-energy functional, which involves strain energy due to axial stretching of the cable and virtual work done by external hydrostatic forces is formulated. The coupled equations of motion in the Cartesian coordinates of global systems are obtained by taking into account the difference between Euler’s equations and equilibrium equations. The method of Galerkin finite element is used to obtain the mass and stiffness matrices which are transformed into the local coordinate systems. Then the eigenvalue problem is solved to determine its natural frequencies and corresponding mode shapes. The model formulation developed herein is conveniently applied for the cases of specified top tension. The numerical investigations are carried out to demonstrate the validity of the model and to explore in details the influence of various parameters on the behaviours of marine cables. Results for the frequency avoidance phenomenon, maximum dynamic tension and coupled transverse mode shapes are presented and discussed. 相似文献
5.
The dynamic response of a towed cable system to ship maneuver is parametrically simulated. Three dimensionless parameters influence on towed cable system maneuverability is investigated. They are ratio of total length to turning radius R/L, ratio of cable mass to vehicle mass σ, and ratio of mass unit length to hydrodynamic force w/r. An oscillatory motion of towed vehicle is found in simulation of spiral towed courses. Features of this oscillation in different spiral courses are compared. The sharp turns, gradual turns and their transient states of towed cable dynamics for different course directions are discussed extensively. According to the characters of transient states and horizontal trajectories evolution of maneuvered cable system, the dynamic behaviors can be divided into three situations in Fig. 8 turning maneuvers. The behavior of towed cable system during a zigzag turning course is simulated in the end. Two ingredients of heave motion are found during small ratio of turning radii to length in this course. The primary damp to initial turning becomes weak and the response to alternative turns plays a more and more important role. The damping properties of the transient behavior in different maneuvers show a periodical invariance to σ during some turning maneuvers. 相似文献
6.
A numerical method for the dynamic simulation of towed cables is presented. The cable is loaded by fluid drag, tension, gravity and buoyancy, including the effects of weights and floats. The development of a cable can be simulated as well as the separation of a cable under excessive load and the subsequent behavior of the broken parts. The system is constructed from a set of generic elements representing such items as cable or rope strands, knots (reference points on rope sections), kinks (sliding reference points on cable sections that change length), cable ends and winches. A mathematical graph organizes these elements in a general and flexible fashion: it allows construction of complex systems and permits structural redefinition during the simulation. The nodes of the graph coincide with the various reference points of the problem, at which physical parameters are lumped and to which sets of ordinary differential equations are associated that define the motions of the points. The links of the graph describe the physical connections between the nodes. Application of new methods for solving stiff, sparse systems of coupled ordinary differential equations enables efficient simulation of snap-loads and other severe events. Results are presented that compare quantitatively with laboratory measurements. A further example shows the behavior of a breaking cable that is qualitatively reasonable. 相似文献
7.
Lei Xinhai Qian Qin Huang Yuying Zhu Dashan Lecturer Dept. of Mechanics Huazhong University of Science Technology 《中国海洋工程》1993,(3)
This paper presents a new finite element method for solving static and dynamic problems in laying operation of pipelines. The effect of the viscoelastic soil behavior is considered by using the Pasternak foundation model. Some examples are also presented. 相似文献
8.
A general set of 3-D dynamic field equations for a cable segment is derived based on the classical Euler-Kirchhoff theory of an elastica. The model includes flexural stiffness to remove the potential singularity when cable tension vanishes and can be reduced to the equations for a perfectly flexible cable. A hybrid model and a solution scheme by direct integration are then proposed to solve the oceanic cable/body system with a localized low-tension region. Numerical examples demonstrate the capability and validity of the formulation and the numerical algorithm. 相似文献
9.
Flexible segment model （FSM） is adopted for the dynamics calculation of marine cable being laid. In FSM, the cable is divided into a number of flexible segments, and nonlinear governing equations are listed according to the moment equilibriums of the segments. Linearization iteration scheme is employed to obtain the numerical solution for the governing equations. For the cable being laid, the payout rate is calculated from the velocities of all segments. The numerical results are shown of the dynamic motion and tension of marine cables being laid during velocity change of the mother vessels. 相似文献
10.
D.A. Chapman 《Ocean Engineering》1984,11(4):327-361
The results of dynamic and steady-state cable simulations are used to show that a towed system can behave in either of two different ways on entering a turn. In a large radius turn the system maintains its straight-tow equilibrium configuration but in a slightly perturbed form. In a turn of small radius the system effectively collapses resulting in a large increase of fish depth and cable tension. A formula is included by which the approximate minimum radius of turn that does not precipitate collapse can be quickly calculated.Non-dimensional tables are presented giving details of the equilibrium configuration adopted by the cable when the ship maintains a circular course.Graphs are presented from which the time constants for the decay of lateral and longitudinal disturbances of 2-D cable profiles can be easily calculated. These can be used to estimate the time taken for a towed system to return to equilibrium following a manoeuvre.The derivation of the equations for the steady-state configurations and the time constants are included in appendices. 相似文献
11.
钢管脐带缆包含多种螺旋缠绕的功能单元，其在外力载荷下会发生相对运动，而且钢管的刚度较大对扭转平衡有重要影响，因此，相对于普通电缆，钢管脐带缆在扭转平衡设计时更加困难。根据扭转平衡理论公式，采用控制变量法，以第二层铠装钢丝的绞合角度为变量进行扭转平衡设计。首先建立脐带缆缆芯有限元模型，对其施加拉伸载荷，结果显示缆芯出现了扭转，这证明不能将脐带缆缆芯视为一实心圆柱。其次建立不同绞合角度的脐带缆有限元模型，设置各功能单元的材料属性和摩擦系数，分析模型在拉伸载荷下的扭转角度，并将相同拉伸载荷下的扭转角度拟合为直线，从而得到钢管脐带缆在扭转平衡状态时的最优绞合角度。最后，采用试验方法对实物钢管脐带缆进行扭转平衡测试，测试结果显示在拉伸载荷下脐带缆单位长度扭转角度十分微小，这表明缆是扭转平衡的。因此验证了使用的有限元方法在钢管脐带缆扭转平衡设计中的有效性。 相似文献
12.
海底管道收弃管作业分析 总被引：7，自引：1，他引：6
为保证海洋管道在收弃管作业过程中不发生屈服,利用样条函数配点法分析了管道为形,利用线性积分法分析了缆索的收放和受力,以图表的形式给出了管道和缆索的受力和变形、铺管船的运动以及Ａ／Ｒ绞车的拉力之间的关系。 相似文献
13.
由于浅水深条件下悬链线系泊系统的性能对系泊缆长度和几何形状更为敏感,悬链线系泊系统的安装误差对其性能的影响较深水条件下的更为显著。因此首先对适用于半潜漂浮式风机的悬链线系泊系统施工进行研究,分别确定了锚安装位置误差、系泊缆预铺误差和系泊缆与漂浮式基础回接误差的来源,并根据施工条件给出了误差值。之后,以浮体动力学仿真作为手段,对系泊缆系统施工误差对其性能的影响进行基于时域仿真的量化研究。研究表明,锚安装位置误差对系泊系统性能影响不大,但系泊缆预铺和回接的误差对系泊系统性能的影响较大。系泊缆回接的误差可造成系泊缆张力平均值和标准差与设计值偏差近20%,可能对系泊系统疲劳寿命评估产生较大的影响。与系泊缆回接误差相比,系泊缆预铺误差的产生原因更为复杂,由于系泊缆预铺误差往往导致系泊缆长度增长,存在误差的系泊缆张力的各项统计值总体偏小,但可能会造成同组无误差系泊缆的张力过载。 相似文献
14.
水下拖缆物理参数不均匀会影响拖缆的动力特性,研究非均匀拖缆的参数变化对拖缆动力特性的影响有一定的工程实际意义。建立了拖曳系统运动的三维数学模型,推导出了水下非均匀拖缆的稳态运动控制方程,在首尾两端加上相应的定解条件,直接求得或使用嵌套二分法求得非均匀拖缆在端点的初始值,进而求解稳态动力学方程。借助文献中的拖缆—海底拖车系统算例,通过计算结果的对比,验证了数学模型及计算方法的正确性。通过四阶龙格库塔法进行数值仿真计算,得到了稳态解,分析了非均匀拖缆自身物理参数变化对缆绳系统稳态运动的影响。结果表明,非均匀拖缆的切向阻力系数、法向阻力系数、直径和密度变化会影响稳态缆形和张力分布,影响的程度各不相同。最后给出了两个尾拖船系统非均匀拖缆的稳态运动算例。 相似文献
15.
Hae-Hoon Park 《Ocean Engineering》1993,20(2)
An indirect tension measurement method of a towing cable in midwater or a buoy cable is proposed using underwater acoustic positioning systems, etc., to give the in-water cable tension. The most simple and traditional cable tension measurement method is to apply a mechanical tension meter at the one end of the cable, but the method has limits in the aspects of continuous monitoring and manual operation. However, the technique in this study is to apply the Pode's analysis of the equilibrium configuration and tension of a flexible twine, in which the cable tension is given as a function of the geometric positions of both ends of the cable. A set of nonlinear integral equations is formulated and solved numerically by the Newton-Raphson method. Then the inclination angles and the tensions at the lower and the upper ends of the cable could be obtained. The derived method enables us to track a towed object, to measure the tension of a towing cable or a buoy cable and is also applicable to the remotely operated vehicle (ROV) tethered to a mother ship. 相似文献
16.
Nonlinear Finite Element Analysis of Ocean Cables 总被引：1，自引：1，他引：1
Nam-ⅡKIM Sang-SooJEON Moon-YoungKIM 《中国海洋工程》2004,18(4):537-550
This study has focused on developing numerical procedures for the dynamic nonlinear analysis of cable structures subjected to wave forces and ground motions in the ocean. A geometrically nonlinear finite element procedure using the isoparamnetrie curved cable element based on the Lagrangian folmulation is briefly summarized. A simple and accurate method to determine the initial equilibrium state of cable systems associated with self-weights, buoyancy and the motion of end points is presented using the load incremental method combined with penalty method. Also the Newmark method is used for dynamic nonlinear analysis of ocean cables. Numerical examples are presented to validate the present numerical method. 相似文献
17.
Time-domain numerical simulation of ocean cable structures 总被引：2，自引：0，他引：2
This paper describes the numerical features of WHOI Cable, a computer program for analyzing the statics and dynamics of oceanographic cable structures. The governing equations include the effects of geometric and material nonlinearities, bending stiffness for seamless modeling of slack cables, and a model for the interaction of cable segments with the sea floor. The program uses the generalized-α time integration algorithm, adaptive time stepping, and adaptive spatial gridding to produce accurate, stable solutions for dynamic problems. The nonlinear solver uses adaptive relaxation to improve robustness for both static and dynamic problems. The program solves surface and subsurface single-point mooring problems, multi-leg and branched array systems, and towing and drifting problems. User specified forcing can include waves, currents, wind, and ship speed. 相似文献
18.
在深海采矿车布放回收中,准确预报脐带缆在底部自由悬垂边界条件和顶部波浪载荷随机激励等共同影响下的动力响应是关键点之一。基于三维势流理论与集中质量法,结合水面支持船运动和海流联合激励,对深海布放回收中脐带缆的顶端张力等力学特性进行研究。结果表明：在布放回收过程中,轴向张力在结构载荷中占主要成分;由波浪引起的轴向张力极值与均值差距最大可达到54%;轴向张力的频谱存在双谱峰,分别为 0.14 Hz的主峰和0.10 Hz 的次峰;当浪向角为180°时,轴向张力处于峰谷。 相似文献
19.
Serious failures of ocean cable have resulted from the phenomenon known as hockling. When a cable is under tension, helical windings can cause the cable to twist. With relaxation of the tension, loops can form. Reapplication of tension tightens the loop, and at some point the loop in the cable may be eliminated or pop out. If it does not but hockles instead, serious damage will result. An analysis is made of the conditions for loop formation and pop-out. The force versus displacement at the ends of a twisted cable and the point at which the cable flips into a loop are derived in closed form from the basic differential equations of an elastica. From this, the maximum allowable cable slack is derived as a function of the cable's twist per unit length. For a cable in the looped configuration, the cable tension at which the loop pops out and the maximum curvature in the loop at the instant of pop-out are found as functions of the cable diameter, torque, and mechanical properties 相似文献