共查询到20条相似文献，搜索用时 858 毫秒
1.
随着近海石油开采事业的迅猛发展,我国已自行设计和建造了许多固定式导管架钢结构海上平台,它们在海洋环境中承受着波浪引起的交变载荷作用,与惰性环境中承受交变载荷条件下得到的疲劳结果相比,交变载荷与侵蚀性环境的联合作用往往导致疲劳性能显著下降。这种损伤可能是疲劳开裂和腐蚀性破坏的简单叠加,也可能是这两者之间某些更为复杂的协同交互作用的结果(贾斯克,1989)。钢结构海上平台是由钢构件(如钢管、钢板、角钢等)焊接而成,海水腐蚀疲劳裂缝大都产生于焊缝区的焊趾处,该部位存在焊接残余应力,以及焊接缺陷和儿何缺陷,形成应力集中。本文通过对海上平台用钢板在空气中、海水中和海水中有阴极保护三种条件下腐蚀疲劳性能的研究,探讨了钢材在海上平台不同部位、不同保护状况下的腐蚀疲劳寿命,为海上采油平台设计与选择提供了理论依据。 相似文献
2.
导管架海洋平台优化设计中约束的有效处理 总被引：8，自引：2，他引：6
对导管架海洋平台优化设计中的应力约束、桩基横向承载力约束和构件长细比约束进行了分析,论证了应力约束取构件截机最大Ｍｉｓｅｓ应力、桩基横向承载力约束取桩顶侧位移或最大抗力比和构件长细约束取受压构件长细比许用值作为约束的合理性。提出了精细一维搜索算法,并用此法求我件截面Ｍｉｓｅｓ应力最大值。 相似文献
3.
采修一体化导管架平台模块化扩展技术是适应油藏加密调整规划以及海上油田滚动开发的需要提出的。通过对采修一体化导管架平台进行有限元建模,本文从位移、应力响应等角度,分析了平台的抗震性能。计算结果表明:刚接情况下平台整体的应力水平要比铰接情况下的应力水平大。刚接和铰接两种工况下,平台自振频率近似相等,且位移变化数值均比较小。遭受地震作用时,在水平、竖直方向产生的振动和弯曲通常是海洋平台结构断裂受损的主要原因。 相似文献
4.
以包括泥面以下桩基在内的所有杆件所构成的桁架式导管架平台为对象,首先通过数值模拟计算组成导管架平台的每一构件的波浪载荷,然后以有限元算法建立包含了平台桩基土反力等因素的导管架整体结构的力学模型,将计算所得波浪载荷施加到该有限元力学模型上,以此通过数值计算手段分析平台中包括泥面以下主桩在内所有杆件的最大应力分布以及桩基的位移特征,从而对平台在特定的波浪环境下的平台主桩的安全性问题进行观察。所提出的方法可为导管架平台在波浪环境下主桩的强度特征分析提供一种实用手段。 相似文献
5.
番禺30-1平台是我国首座位于南海海域水深200 m的固定式导管架海洋平台结构,平台结构基频较低,在动载荷作用下平台结构极易发生振动响应,可能对平台结构构件、设备及人员造成一定的安全隐患。现场监测得到的番禺30-1平台结构振动响应统计数据发现,季风期平台结构在波浪作用下发生稳定持续的振动响应,偶然性拖船撞击平台结构桩腿时发生较为强烈的瞬态振动响应。运用有限元数值动力分析方法,结合相关规定对平台结构在波浪及拖船撞击时进行了结构安全性能分析,为平台结构的安全运行及安全保障提供参考价值。 相似文献
6.
电化学修复技术是提升既有钢筋混凝土结构耐久性重要方法,能有效除去有害氯离子,延长结构使用寿命。采用电化学修复技术对钢筋混凝土结构进行耐久性修复时,作为阴极的钢筋会发生析氢反应,当钢筋表面的氢浓度达到临界值时,钢筋的塑性会降低,并发展成裂纹,导致钢筋出现氢脆现象。开展了不同电化学参数的电化学修复试验,并采用物理方法和力学方法进行了氢致塑性降低的影响分析。结果表明氢致塑性降低与电流密度、应力水平均相关;当清楚工程构件的受力状态时,可采用合适的电流密度对构件进行电化学修复,控制塑性损失程度在工程的可接受范围内,以达到钢筋氢脆控制的目的。 相似文献
7.
通过对平台在风浪作用下的振动测试分析,发现了直立式非灌浆桩腿导管架平台在海底冲刷条件下发生异常振动的原因是导管架与桩之间存在较大的相对运动,以至于在风浪较大时发生碰撞。因而,结构的动力特性和动态响应都与设计结果不一致。在非极值海况条件下,平台的振动超出了设计预测值,并提出了治理和设计建议。 相似文献
8.
桩腿耦合装置(简称LMU)在平台浮托安装过程中上部组块插尖与导管架桩管对接期间起缓冲作用,是海上浮装的最重要装置之一。运用非线性有限元软件ABAQUS,对相同尺寸、受相同垂向载荷作用的有沙箱和无沙箱的LMU分别进行了显式准静态和动态数值模拟,并将计算结果进行对比,以考察沙箱对LMU力学特性的影响。结果表明,与无沙箱的LMU相比,有沙箱的LMU能够承受较大的外载荷作用,可提升外套筒钢材的使用效率,较迅速地降低载荷转移作业过程中整个平台的运动速度,提高平台浮托安装过程中能量吸收速率,并且能减小LMU在动态过程中的最大应力。 相似文献
9.
研究了大型导管架平台卧式建造时出现单边约束圆管的风致涡激振动问题。将建造过程中单边约束的导管架圆管简化成悬臂梁模型,采用van der Pol尾流振子模型模拟圆管受到的流体力,建立了圆管风致涡激振动动力学方程。使用伽辽金方法对建立的运动方程进行求解,数值分析了圆管在特定约化风速下的涡激振动特性。在圆管上附加非线性能量阱(NES)作为被动减振装置对圆管进行减振,并采用粒子群优化算法对NES的非线性刚度和阻尼参数进行了优化。结果表明,在约化速度为4.8时,得到的NES优化的非线性刚度和阻尼参数组合可以有效减小悬臂梁自由端风致涡激振动位移。本研究说明采用NES和粒子群优化算法可以有效减小圆管的风致涡激振动,为导管架安全建造提供一定的参考。 相似文献
10.
自升式平台拖航工况桩腿设计标准研究 总被引：1，自引：0，他引：1
本文对自升式钻井平台拖航工况桩腿的外力、内力和应力设计标准进行了综合分析。分别按照美国船检局、英国劳氏船级社、挪威船级社和我国船检局的近海移动式钻井平台入级和建造规范对我国建造的自升式平台桩腿结构进行分析计算。将所得的结果列表并绘出曲线,进行了综合分析。其结论为应用近海移动式钻井平台入级与建造规范和对这种自升式平台设计提供适当的依据. 相似文献
11.
现有服役海洋平台正逐步走向老龄化,海洋平台拆除成为海洋工程新的经济增长点。针对达到服役年限的导管架平台,基于数值分析方法模拟拆除过程,开展平台在不同拆除阶段和环境载荷等参数下的稳定性及影响规律研究。基于钢结构整体稳定性理论,以导管架平台拆除过程中顶点位移为参考,定义导管架平台拆除作业稳定性指标,提出拆除作业阶段划分方法,通过分析导管架平台在不同影响因素作用下拆除过程稳定性响应,给出拆除作业建议。选取我国南海某4裙12腿进行实例分析,结果表明:主桩腿对导管架平台起决定性承载作用,拆除部分主桩腿后需要引入外部支撑力,以保证拆除作业安全进行;拆除构件越多,来浪方向和环境载荷大小对平台影响越加显著。研究结果可为导管架平台拆除作业提供参考。 相似文献
12.
钢管斜桩是潮间带风电的常用基础形式,常采用吊打沉桩的方式。文章针对潮间带吊打沉桩方式的难点开发吊打导向装置,并总结沉桩参数的确定方法。该导向装置包括定位桩、定位架和调向限位架,总体平面布局为六边形,可一次定位并完成整个风电基础的基桩施工,既能可靠保证桩的施工精度,又能极大地提高施工效率和降低安全风险;在应用该施工关键装备时,采用GRLWEAP打桩分析功能确定桩顶动荷载,采用有限元软件建立导向装置有限元模型,对导向装置和沉桩参数进行分析,从而实现斜桩顺利沉桩的目的。该装置和方法已成功应用于越南朔庄一期海上风电场项目,为潮间带风电钢管斜桩吊打施工提供沉桩装备和方法经验。 相似文献
13.
Wu Lianyuan Hu Gangyi Professor Shanghai Jiaotong University Shanghai Engineer Wuhan Ship Development & Design Institute Wuhan 《中国海洋工程》1994,(2)
-This paper adopts approximate formulas for residual stresses caused by cold bending for plates with stress-strain curve form a = K n. A typical distribution of the longitudinal residual stress due to welding is also assumed. The effects of residual stress due to cold bending and welding on plastic buckling of axially compressed cylindrical shells are studied by the finite element method. 相似文献
14.
K-joint is widely used on offshore platforms; its strength is very important for safety evaluation of platforms and the welding residual stress is inevitable. According to the thermo-effect of welding process, based on ANSYS, using the birth-death element technology, numerical simulation was performed for the welding process by coupling the temperature field and stress field. The nonlinear changes of material properties were considered and the distribution of temperature and stress was obtained. Considering that annealing treatment is generally performed for K-joint after welding, the process of annealing treatment was also simulated in this paper and the influence of it on welding residual stress was analyzed. Based on this, axial loads were applied on two different K-joint models, one with welding residual stress and the other without welding residual stress while just considering the influence of welding seam structure on the K-joint. The stress concentration factors (SCFs) of these two models were calculated and thus the influence of the welding residual stress on stress concentration factor was analyzed. Furthermore, considering the influence of welding residual stress, 105 models of K-joints with different geometric parameters and loading conditions were generated and the effects of them on the SCFs were discussed, results presented in this paper provide references for safety analysis of K-joints. 相似文献
15.
16.
A new type of quay wall structure has been proposed to improve the seismic resistance capability of existing sheet pile quay wall structures. The new structure adopts a combination of stabilized soil and geogrid, and this structure is referred to simply as “SG-WALL”. This paper presents a numerical comparative study on the seismic performances of quay wall structures between the newly developed SG-WALL and the traditional anchor pile-reinforced structure. The calculated results, including displacement of sheet pile, ground settlement, bending moment and stress of sheet pile, and excess pore water pressure, were analyzed and discussed. It was shown that both types of improvement methods can effectively reduce the residual displacements of sheet piles after earthquakes. The residual displacements at the top of the sheet piles in SG-WALL structure and the anchor pile-reinforced structure decreased by 35.6 and 38.2%, respectively. In addition, the SG-WALL structure can more significantly reduce the ground settlement due to earthquakes. The maximum ground settlement in SG-WALL structure and the anchor pile-reinforced structure decreased by 67.3 and 58.9%, respectively. 相似文献
17.
18.
Study of the Bearing Capacity at the Variable Cross-Section of A Riser-Surface Casing Composite Pile
Reducing the cost of offshore platform construction is an urgent issue for marginal oilfield development.The offshore oil well structure includes a riser and a surface casing.The riser,surface casing and oil well cement can be considered special variable cross-section piles.Replacing or partially replacing the steel pipe pile foundation with a variable cross-section pile to provide the required bearing capacity for an offshore oil platform can reduce the cost of foundation construction and improve the economic efficiency of production.In this paper,the finite element analysis method is used to investigate the variable cross-section bearing mode of composite piles composed of a riser and a surface casing in saturated clay under a vertical load.The calculation formula of the bearing capacity at the variable section is derived based on the theory of spherical cavity expansion,the influencing factors of the bearing capacity coefficient Nc are revealed,and the calculation method of Nc is proposed.By comparing the calculation results with the results of the centrifuge test,the accuracy and applicability of the calculation method are verified.The results show that the riser composite pile has a rigid core in the soil under the variable cross-section,which increases the bearing capacity at the variable cross-section. 相似文献
19.
将现代信息技术引入海洋信息化建设从而提高海洋行政执法科学化水平,是保证合理开发利用海洋和海洋经济健康可持续发展的有效途径。文章研究新形势下的海洋行政执法信息化机制,以例行执法检查和专项执法行动为主线,以航空监察、案件报备、行政审批和法律法规等为辅助,集成各类执法数据信息,运用软件编程和网络技术建立具有海洋行政执法业务流转和地图服务综合功能的信息监管系统,逐步实现海洋行政执法工作由传统监管模式向科学化、标准化和规范化的现代空间管理方式过渡,推进海洋行政执法监管的信息化进程,提升执法效率和监管力度。 相似文献
20.
Two- and three-dimensional finite element analysis programs for pile-soil interaction are compiled. Duncan-Chang's Model is used. The construction sequence of the pier is modeled. The pile-soil interface element is used. The influence of the combination type of piles on the deformation of bank slope and pile behaviour is analyzed. Different designs of a pile-supported pier are compared thoroughly. Calculation results show that the stresses and displacements of the pile are directly related to the distance from the bank slope and the direction of inclination. An inclined prop pile set in the rear platform would remarkably reduce the stresses of piles and the displacement of the pier. 相似文献