共查询到20条相似文献，搜索用时 31 毫秒
1.
A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic response caused by the inconsistent motions of the structural supports,and the second is the structural dynamic response to ground motion accelerations.This method is formally consistent with the classical response spectrum method,and the effects of multisupport excitation are considered for any modal response spectrum or modal superposition.If the seismic inputs at each support are the same,the support displacements caused by the pseudostatic response become rigid body displacements.The response spectrum in the case of multisupport excitations then reduces to that for uniform excitations.In other words,this multisupport response spectrum method is a modification and extension of the existing response spectrum method under uniform excitation.Moreover,most of the coherency coefficients in this formulation are simplified by approximating the ground motion excitation as white noise.The results indicate that this simplification can reduce the calculation time while maintaining accuracy.Furthermore,the internal forces obtained by the multisupport response spectrum method are compared with those produced by the traditional response spectrum method in two case studies of existing long-span structures.Because the effects of inconsistent support displacements are not considered in the traditional response spectrum method,the values of internal forces near the supports are underestimated.These regions are important potential failure points and deserve special attention in the seismic design of reticulated structures. 相似文献
2.
An improved pseudo-static method for seismic resistant design of underground structures 总被引：1，自引：0，他引：1
This paper describes a commonly used pseudo-static method in seismic resistant design of the cross section of underground structures. Based on dynamic theory and the vibration characteristics of underground structures, the sources of errors when using this method are analyzed. The traditional seismic motion loading approach is replaced by a method in which a one-dimensional soil layer response stress is differentiated and then converted into seismic live loads. To validate the improved method, a comparison of analytical results is conducted for internal forces under earthquake shaking of a typical shallow embedded box-shaped subway station structure using four methods： the response displacement method, finite element response acceleration method, the finite element dynamic analysis method and the improved pseudo-static calculation method. It is shown that the improved finite element pseudo-static method proposed in this paper provides an effective tool for the seismic design of underground structures. The evaluation yields results close to those obtained by the finite element dynamic analysis method, and shows that the improved finite element pseudo-static method provides a higher degree of precision. 相似文献
3.
Accurate estimation of the peak seismic responses of structures is important in earthquake resistant design. The internal force distributions and the seismic responses of structures are quite complex, since ground motions are multi- directional. One key issue is the uncertainty of the incident angle between the directions of ground motion and the reference axes of the structure. Different assumed seismic incidences can result in different peak values within the scope of design spectrum analysis for a given structure and earthquake ground motion record combination. Using time history analysis to determine the maximum structural responses excited by a given earthquake record requires repetitive calculations to determine the critical incident angle. This paper presents a transformation approach for relatively accurate and rapid determination of the maximum peak responses of a linear structure subjected to three-dimensional excitations within all possible seismic incident angles. The responses can be deformations, internal forces, strains and so on. An irregular building structure model is established using SAP2000 program. Several typical earthquake records and an artifi cial white noise are applied to the structure model to illustrate the variation of the maximum structural responses for different incident angles. Numerical results show that for many structural parameters, the variation can be greater than 100%. This method can be directly applied to time history analysis of structures using existing computer software to determine the peak responses without carrying out the analyses for all possible incident angles. It can also be used to verify and/or modify aseismic designs by using response spectrum analysis. 相似文献
4.
大跨度张弦桁架竖向地震反应分析 总被引：1，自引：0，他引：1
在张弦桁架优化设计及约束条件影响分析基础上，建立了60m、80m、100m、125m、150m跨度模型，采用振型分解反应谱法和时程分析方法对竖向地震作用进行分析，得到了小震、大震作用下结构最大动内力系数及动内力分布规律，并对大震时结构挠度与拉索是否会松弛进行了分析，用反应谱法与时程法得到的结果基本一致。本计算结果可供张弦桁架设计参考。 相似文献
5.
目前用于结构抗震设计的反应谱仅能反映峰值反应,无法体现反应值随时间的变化。文中提出一种弹性能量半径演化谱,可反映线性单自由度体系弹性能量(即动能与弹性势能之和)随地震持时的变化,且其峰值近似等于结构峰值位移。文中给出了利用地震动演化功率谱得到该演化谱的方法并进一步发展了一种计算线性多自由度体系地震位移反应的新方法。通过两座框架结构的地震反应计算,将新方法与传统振型组合法及时程分析法的计算结果进行对比,发现对于振型稀疏结构,新方法计算结果与SRSS法接近;而对于振型密集结构,新方法计算结果较CQC法更精确,且避免了CQC法相关系数的复杂计算。 相似文献
6.
地震波峰值调整常采用基于地震动峰值加速度（PGA）的方法来实现,而现行规范中设计反应谱的峰值加速度为有效峰值加速度（EPA）,建议采用EPA进行峰值调整。首先,分析PGA和EPA含义及其内在联系,总结国内外现有的EPA计算方法,根据桥梁结构与建筑结构的不同特点,修正桥梁结构时程分析EPA的计算公式。其次,研究EPA计算中地震波反应谱的平滑处理问题,并提出3种峰值平滑方法,分析相关参数的取值及各方法的优劣性。最后,将此方法应用于一座大跨度斜拉桥进行时程分析,比较基于PGA和EPA两种不同峰值调整方法下结构的位移和内力结果。结果表明,应用基于EPA的峰值调整方法得到的时程分析结果更加可靠。 相似文献
7.
基于能力谱法的SSI体系抗震pushover分析方法 总被引：1，自引：0，他引：1
本文首先经过2次等效将土与结构相互作用的多自由度体系等效为单自由度体系,并给出了修正反应谱和等价能力谱的确定方法,进而提出了基于能力谱法考虑土与结构动力相互作用(SSI)效应的结构体系pushover分析方法(SSIPA);然后对3种不同高度考虑SSI效应的结构体系在5条地震动作用下采用本文提出的方法进行了算例分析,将结果与非线性时程分析的结果进行了比较,研究了本方法的适用性和准确性;最后,与建筑抗震设计规范的设计反应谱相结合,对9层考虑SSI效应的钢结构用本文提出的方法进行了弹塑性地震反应分析,根据我国抗震设计规范的规定进行抗震性能的评估验证了本方法的可行性。 相似文献
8.
作为一种新型转换层结构——错位转换层结构,其竖向位置的移动对高层结构在水平地震作用下竖向构件受力性能有何影响目前尚未见文献报道。采用有限元程序对高层带错位转换层结构进行了水平地震作用下的时程反应和反应谱分析．分析了上部转换层和下部转换层相对位置保持不变的情况下．整体改变错位转换层位置对结构地震作用、剪力及竖向构件内力的影响。分析研究发现。错位转换层整体位置的竖向移动对结构整体剪力、上部转换层下承托墙肢内力、上部转换层框支剪力墙内力影响不大．但对落地剪力墙、上部转换层下框支柱和下部转换层梁托柱内力有较大影响。 相似文献
9.
为了研究随机地震动场多点激励作用下宽幅大跨桥梁结构的地震响应,基于二维相干模型,考虑地震波非平稳性合成桥址各支承点的人工地震加速度时程波,采用多项式拟合法在时域内对各支承点处的人工合成加速度波进行校正,并对校正前后加速度波的响应谱进行比较校验;随后以某大跨自锚式悬索桥为例,利有限元软件中线性时程分析模块,将所合成的加速度地震波施加于结构,对比研究一致激励与随机地震动多点激励下宽幅大跨桥梁结构的地震响应。分析表明,考虑二维相干和地震波非平稳性合成的各支承点地震加速度时程波可采用多项式拟合法进行基线漂移现象的校正,同时应对修正前后加速度波的反应谱进行比较校验;对于大跨且横桥向支承点相距较远的桥梁结构应考虑横桥向地震波的非一致性。 相似文献
10.
为研究曲线桥梁结构桥墩高度参数对地震响应的敏感性,借助有限元分析软件Midas Civil,通过分类处理建立边墩为变高墩和中墩为变高墩两类有限元分析模型。根据Newmark-β法对多自由度体系的曲线桥梁结构进行动力时程分析,结合曲线桥梁结构地震激励的输入基本方式,计算两类墩高布置形式下两跨曲线连续梁桥结构的基本周期、墩顶位移、主梁内力和桥墩墩底内力的变化规律,通过对计算结果分析探究桥墩高度参数和桥墩高度比参数对曲线桥梁结构地震响应的影响规律。研究结果表明:相同条件下,Ⅱ类曲线桥梁的整体刚度小于Ⅰ类曲线桥梁结构;各墩顶径向位移对桥墩高度比和墩高参数敏感性不同;中墩顶曲线主梁内力耦合机理复杂,难以用较少结构参数表征;变高墩墩底内力与曲线桥梁桥墩布置类型密切相关。研究结果可用于指导山区曲线桥梁结构的抗震分析和设计。 相似文献
11.
This paper presents a new procedure to transform an SSI system into an equivalent SDOF system using twice equivalence. A pushover analysis procedure based on the capacity spectrum method for buildings with SSI effects （PASSI） is then established based on the equivalent SDOF system, and the modified response spectrum and equivalent capacity spectrum are obtained. Furthermore, the approximate formulas to obtain the dynamic stiffness of foundations are suggested. Three steel buildings with different story heights （3, 9 and 20） including SSI effects are analyzed under two far-field and two near-field historical records and an artificial seismic time history using the two PASSI procedures and the nonlinear response history analysis （NLhRHA） method. The results are compared and discussed. Finally, combined with seismic design response spectrum, the nonlinear seismic response of a 9-story building with SSI effects is analyzed using the PASSI procedures, and its seismic performance is evaluated according to the Chinese ＇Code for Seismic Design of Buildings. The feasibility of the proposed procedure is verified. 相似文献
12.
地震动差动作用下大跨度空间网壳结构的反应分析 总被引：1，自引：0，他引：1
选取100m跨度的双层柱面网壳结构为研究对象,采用时程分析法,分别进行了结构在单向和三向地震行波输入作用下的反应分析,并针对多种视波速情况进行了研究,考查了地震动不同输入情况下结构杆件内力的分布特点,对其进行了对比分析,为大跨网壳结构的抗震设计提供了理论依据。研究表明,考虑行波效应会使结构部分构件内力有一定程度的提高,多维地震作用比单维地震作用下结构的杆件内力大。由此得出结论：对于大跨度空间网壳结构,应该进行多维非一致输入下的地震反应分析;为保证抗震安全,应对可能出现的地面视波速进行全面分析。 相似文献
13.
14.
本文采用子空间迭代法分析了单层膜型网壳结构的自振特性;推导了大跨空间结构几何非线性地震响应时程分析的计算过程,编制相应的计算程序,用振型分解反应谱法与时程法进行了结构地震响应特性分析。研究表明:膜型网壳结构的抗震性能比较好;用反应谱法分析时,水平地震作用下截断振型取15、竖向地震作用下取60可满足工程设计要求;用反应谱法计算结构竖向地震响应是安全可靠的,但进行水平地震响应分析时,最终还需用时程法进行验算。 相似文献
15.
能力谱方法在桥梁抗震性能评估中的应用研究 总被引：1，自引：0，他引：1
位移延性是桥梁抗震性能的重要指标之一,以Pushover分析为基础的能力谱方法能够考察结构在地震下的弹塑性位移响应,是抗震性能评估的一种有效手段.文中阐述了能力谱法的基本原理,说明了基于弹塑性反应谱的能力谱方法在求解性能点时不需要进行迭代计算;基于弹性设计反应谱建立了相对应的弹塑性反应谱,结合某实桥,将能力谱方法和增量动力分析方法进行了对比,并根据不同的地震基本烈度和场地土类型进行了抗震性能评估.分析认为,能力谱方法计算简便,对结构1阶振型的地震响应占主导时,具有较好的精度,并能够基于设计反应谱来考察结构的弹塑性抗震性能,可用于桥梁抗震性能的评估. 相似文献
16.
K. G. Kostinakis A. M. Athanatopoulou I. E. Avramidis 《Bulletin of Earthquake Engineering》2013,11(2):637-661
The aim of the present paper is to evaluate by means of nonlinear dynamic analysis four different procedures for the selection of sectional forces needed for the design of R/C frames. For this purpose, a single-story building is designed using four different procedures to select the sets of internal forces needed for the calculation of longitudinal reinforcement. All the four procedures are based on the results of linear response history analysis. Nonlinear dynamic analyses under 16 bi-directional ground motions are performed for 4 different seismic intensity levels. The two horizontal accelerograms of each ground motion are applied along horizontal orthogonal axes forming with the structural axes several incident angles. The results of this study demonstrate that one of the investigated procedures that takes into account the critical seismic angle is more efficient for the design of R/C frame elements. 相似文献
17.
以某典型的12层钢筋混凝土框架结构作为研究对象,研究基于非线性动力时程分析和地震动参数的RC框架结构易损性分析方法。首先采用静力pushover分析判定结构薄弱层,并确定结构性能(capacity)参数;然后应用非线性动力时程分析估计结构地震反应,研究以峰值加速度和基本周期加速度反应谱作为地震动参数结构反应的不确定性,并进一步分析结构地震需求(demand)参数与地震动参数的关系;在此基础上,分别建立该结构基于峰值加速度和加速度反应谱的易损性曲线,通过考虑场地条件对地震动特性的影响,研究场地条件对结构易损性的影响,结果表明不同场地条件下的结构易损性曲线有一定差异。应用本文方法,根据新一代地震区划图或地震安全性评价确定的地震动参数,可以直接估计结构在未来地震中出现不同破坏的概率,这在结构的抗震性能评估和地震损失预测中有一定意义。 相似文献
18.
损伤和缺陷对海洋平台抗冰抗震性能的影响 总被引：1，自引：0，他引：1
现役导管架式海洋平台可能会存在裂纹、凹痕、腐蚀等缺陷和损伤,并可能受到海洋生物附着及地基土冲刷的影响,这些问题将减小构件强度或者放大荷载作用.取一座导管架海洋平台为例,应用动力时程及整体推进法进行分析,对比损伤前后动冰力作用下结构响应、结构抗冰能力曲线及剩余强度储备系数,并取3个地震波对损伤前后结构的地震响应、抗震能力曲线、抗震安全裕度系数进行对比.结果显示损伤和缺陷极大地降低了海洋平台抗冰抗震性能,对现役海洋平台的检测和维修也有一定借鉴意义. 相似文献
19.
20.
为探索非一致地震波动输入对大型钢筋混凝土框架结构地震响应的影响,基于OpenSees软件平台建立二维钢筋混凝土框架结构\|地基动力相互作用有限元模型。将El-Centro地震波按P波波形分别以0°、15°、30°和35°角入射该有限元模型进行计算,对比分析框架柱内力和楼层层间位移的地震响应。研究发现非一致地震波输入方法对于大型钢筋混凝土框架结构建筑动力响应影响明显,随着地震波入射角的增大,钢筋混凝土框架结构底层柱的轴力幅值减小,剪力幅值增大,而弯矩幅值变化较小,楼层层间位移幅值也随之增大。研究结果对于大型钢筋混凝土框架结构抗震设计具有参考意义。 相似文献