共查询到20条相似文献，搜索用时 468 毫秒
1.
I~IOWNUmerics wave tank is a ~ tOOl by which variouS nonlinear wave - ac interactionpwhleln can be treated in time domain. As the face stage, we f~ our efforts on the devious of an effita saution tee~ of fully nofor waves. aam numtried of water - wavesconnected PwhlemS, es~ in a wave tank, is alwayS comas Of PartS: wave generation, P~ and a~. The effi~ Of a nUm~ wave tankdepends not Only on the qwhty Of the wave abotion tecboaue, which allowS the lOng times~ and keePS finite tank leng… 相似文献
2.
It is a good test for a numerical model to simulate progressive waves propagating over a submerged bar with a relatively high ratio of slopes. In this paper, the combined IB–VOF model is used to predict nonlinear dispersive waves propagating over a submerged bar with both slopes of 1:2. The predicted free surface elevations are compared with the experimental data and numerical results presented by other researchers. The comparison shows that the IB–VOF model is able to provide satisfactory wave profiles in the shallow water with strong nonlinear effects and in the wave transmitted region with strong wave dispersion in particular. Moreover, the wave evolution behind the submerged bar is described in detail, including the spatial wave profile modulation, spectral analysis of the time-series waves, flow velocity and pressure fields, and kinetic energy distribution. The effect of fluid viscosity on the numerical simulations is also studied, and it is found that the effect on the wave evolution considered in this paper is not significant. Finally, the hydrodynamic force acting on the bar is calculated using the IB–VOF model. 相似文献
3.
Application of desingularized approach to water wave propagation over three-dimensional topography 总被引：1，自引：0，他引：1
A numerical approach based on desingularized boundary element method and mixed Eulerian–Lagrangian formulation [Zhang et al., 2006. Wave propagation in a fully nonlinear numerical wave tank: a desingularized method. Ocean Engineering 33, 2310–2331] is extended to solve the water wave propagation over arbitrary topography in a three-dimensional wave tank. A robust damping layer applicable for regular and irregular incident waves is employed to minimize the outgoing wave reflection back into the wave tank. Numerical results on the propagation of regular and irregular incident waves over the flat bottom and linear incident waves over an elliptical shoal show good concurrence with the corresponding analytical solutions and experimental data. 相似文献
4.
V. Armenio 《Ocean Engineering》1998,25(10):881-905
In this paper, an improved version of the MAC method (SIMAC), recently developed at the University of Trieste, is employed for the study of the wave generation and propagation into a numerical wave tank and for the evaluation of dynamic loads over submerged fixed bodies.In the first part of the work, a numerical wave tank was developed. A pneumatic wave-maker at the left-hand side of the tank was implemented by the use of a pressure perturbation at the free surface. The pressure varies in time with a sinusoidal law. Grid sensitivity tests, checks on mass conservation and the Fourier analysis of the waves which propagate in the tank showed the effectiveness of SIMAC in treating such problems. The wave-maker was then calibrated.In the second part of the work, the dynamic loads over submerged square and rectangular cylinders were evaluated. The time records of the horizontal and vertical forces which act over the body were then treated using the Morison equation in order to derive the inertial and damping coefficients. The analysis was carried out for KC numbers ranging between 0.447 and 3.58. Numerical results satisfactorily tallied with experimental data. The analysis of the velocity field near the body evidenced the influence of vortex generation and vortex shedding on the coefficients of inertial forces. 相似文献
5.
1 .IntroductionApile supportedplatesubmergedatacertaindepthunderseasurfacewasdevelopedasanewtypeofunderwaterbreakwaterfortheprotectionofcoastlinesandharbors .Thisisbecauseitdoesnothinderthewaterexchangebetweentheopenseaandtheprotectedareanordoesithindertheviewovertheopensea .Besides,itislessdependentonthegeotechnicalconditionsoftheseabottomwherethestructureistobeinstalled ;however,itscostishigh ,particularlyinrelativelydeepwaters .Formanyapplicationsitispossibletoreducethewavemotionintheprotec… 相似文献
6.
Numerical simulations using momentum source wave-maker applied to RANS equation model 总被引：2，自引：0，他引：2
For Navier-Stokes equation model using the VOF scheme, Lin and Liu (Lin, P. and Liu, P.L.-F. (1999). Internal wave-maker for Navier-Stokes equations models. J. Waterw. Port Coast. Ocean Eng., 125 (4), 207–215.) developed an internal wave-maker method for which a mass source function of the continuity equation was used to generate target wave trains. Using this internal wave-maker method, various numerical experiments have been conducted without any problems due to waves reflected by a wave-maker. In this study, an internal wave-maker method using a momentum source function was proposed. Various numerical simulations in two and three dimensions were performed using the momentum source wave-maker applied to the RANS equation model in a CFD code, FLUENT. To verify their applicability in 2 dimensions, the computational results obtained using the momentum source wave-maker in a channel of constant depth were compared with the results obtained by using the mass source wave-maker and with the analytical solutions. And the results of the present numerical simulations of hydraulic experiments, which represent nonlinear waves on a submerged shoal and breaking waves on a plane beach, were compared with measurements. The comparisons showed good agreements between them. To see their applicability into 3-dimensional cases, the present results in a basin of constant depth were compared with the analytical solutions, and they agreed well with each other. In addition, vertical variation of longshore current was presented by using the 3-dimensional simulation results. 相似文献
7.
Numerical Wave Channel with Absorbing Wave-Maker 总被引：2，自引：0，他引：2
Wang Yongxue
Professor State Key Laboratory of Coastal Offshore Engineering Dalian University of Technology Dalian 《中国海洋工程》1995,(2)
The numerical wave channel has been developed based on the volume of fluid method (VOF) in conjunction with the Navier-Stokes equations. The absorbing wave-maker boundary on the left side of the channel is presented by prescribing velocity reference to linear wave-maker theory. The principle of which is that the numerical wave-maker is designed to move in a way that generates the required incident wave and cancels out any reflected wave that reach it at the same time. On the right side of the channel, the open boundary is set to permit incident waves to be transmitted freely. The parametric studies have been carried out at a range of ratios of water depth to wave length d/ L from 0.124 to 0.219, with wave height in the front of paddle/water depth ratio (H0 / d) from 0.1 to 0.3. Wave height, wave pressure distribution along the channel and velocity field are obtained for both open boundary condition and reflective boundary condition at the other end of the channel. For a reflective case, it is shown that 相似文献
8.
In this paper, a numerical model is established for estimating the wave forces on a submerged horizontal circular cylinder. For predicting the wave motion, a set of two-dimensional Navier-Stokes equations is solved numerically with a finite element method. In order to track the moving non-linear wave surface boundary, the Navier-Stokes equations are discretized in a moving mesh system. After each computational time step, the mesh is modified according to the changed wave surface boundary. In order to stabilize the numerical procedure, a three-step finite element method is applied in the time integration. The water sloshing in a tank and wave propagation over a submerged bar are simulated for the first time to validate the present model. The computational results agree well with the analytical solution and the experimental data.Finally, the model is applied to the simulation of interaction between waves and a submerged horizontal circular cylinder.The effects of the KC number and the cylinder depth on the wave forces are studied. 相似文献
9.
Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate 总被引：1，自引：0，他引：1
This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity. 相似文献
10.
11.
12.
Nonlinear water wave propagation passing a submerged shelf is studied experimentally and numerically. The applicability of two different wave propagation models has been investigated. One is higher-order Boussinesq equations derived by Zou (1999) and the other is the classic Boussinesq equations. Physical experiments are conducted, three different front slopes (1:10, 1:5 and 1:2) of the shelf are set up in the experiment and their effects on wave propagation are investigated. Comparisons of numerical results with test data are made, the model of higher-order Boussinesq equations agrees much better with the measurements than the model of the classical Boussinesq equations. The results show that the higher-order Boussinesq equations can also be applied to the steeper slope case although the mild slope assumption is employed in the derivation of the higher order terms of higher order Boussinesq equations. 相似文献
13.
《Coastal Engineering》2006,53(4):311-318
The extended mild-slope equations of Suh et al. [Suh, K.D., Lee, C., Park, W.S., 1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Eng., 32, 91–117] and Lee et al. [Lee, C., Kim, G., Suh, K.D., 2003. Extended mild-slope equation for random waves. Coastal Eng., 48, 277–287] are compared analytically and numerically to determine their applicability to random wave transformation. The geometric optics approach is used to compare the two models analytically. In the model of Suh et al., the wave number of the component wave with a local angular frequency ω is approximated with an accuracy of O(ω − ω¯) at a constant water depth, where ω¯ is the carrier frequency of random waves. In the model of Suh et al., however, the diffraction effects and higher-order bottom effects are considered only for monochromatic waves, and the shoaling coefficient of random waves is not accurately approximated. This inaccuracy arises because the model of Suh et al. was derived for regular waves. In the model of Lee et al., all the parameters of random waves such as wave number, shoaling coefficient, diffraction effects, and higher-order bottom effects are approximated with an accuracy of O(ω − ω¯). This approximation is because the model of Lee et al. was developed using the Taylor series expansion technique for random waves. The result of dispersion relation analysis suggests the use of the peak and weighted-average frequencies as a carrier frequency for Suh et al. and Lee et al. models, respectively. All the analytical results are verified by numerical experiments of shoaling of random waves over a slightly inclined bed and diffraction of random waves through a breakwater gap on a flat bottom. 相似文献
14.
One-dimensional numerical models of higher-order Boussinesq equations with high dispersion accuracy 总被引：3，自引：0，他引：3
Abstract-Nonlinear water wave propagation passing a submerged shelf is studied experimentally andnumerically. The applicability of the wave propagation model of higher-order Boussinesq equations de-rived by Zou(2000, Ocean Engneering, 27, 557～575) is investigated. Physical experiments areconducted; three different front slopes (1:10, 1:5 and 1:2) of the shelf are set-up in the experimentand their effects on the wave propagation are investigated. Comparisons of the numerical results withtest data are made and the higher-order Boussinesq equations agree well with the measurements since thedispersion of the model is of high accuracy. The numerical results show that the good results can also beobtained for the steep-slope cases although the mild-slope assumption is employed in the derivation of thehigher-order terms in the higher-order Boussinesq equations. 相似文献
15.
A numerical irregular wave flume with active absorption of re-reflected waves is simulated by use of volume of fluid （VOF） method. An active ＇absorbing wave-maker based on linear wave theory is set on the left boundary of the wave flume. The progressive waves and the absorbing waves are generated simultaneously at the active wave generating-absorbing boundary. The absorbing waves are generated to eliminate the waves coming back to the generating boundary due to reflection from the outflow boundary and the structures. SIRW method proposed by Frigaard and Brorsen （1995） is used to separate the incident waves and reflected waves. The digital filters are designed based on the surface elevation signals of the two wave gauges. The corrected velocity of the wave-maker paddle is the output from the digital filter in real time. The numerical results of regular and irregular waves by the active absorbing-generating boundary are compared with the numerical results by the ordinary generating boundary to verify the performance of the active absorbing-generator boundary. The differences between the initial incident waves and the estimated incident waves are analyzed. 相似文献
16.
With growing computational power, the first-order wave-maker theory has become well established and is widely used for numerical wave flumes. However, existing numerical models based on the first-order wave-maker theory lose accuracy as nonlinear effects become prominent. Because spurious harmonic waves and primary waves have different propagation velocities, waves simulated by using the first-order wave-maker theory have an unstable wave profile. In this paper, a numerical wave flume with a piston-type wave-maker based on the second-order wave-maker theory has been established. Dynamic mesh technique was developed. The boundary treatment for irregular wave simulation was specially dealt with. Comparisons of the free-surface elevations using the first-order and second-order wave-maker theory prove that second-order wave-maker theory can generate stable wave profiles in both the spatial and time domains. Harmonic analysis and spectral analysis were used to prove the superiority of the second-order wave-maker theory from other two aspects. To simulate irregular waves, the numerical flume was improved to solve the problem of the water depth variation due to low-frequency motion of the wave board. In summary, the new numerical flume using the second-order wave-maker theory can guarantee the accuracy of waves by adding an extra motion of the wave board. The boundary treatment method can provide a reference for the improvement of nonlinear numerical flume. 相似文献
17.
基于非静压单相流模型NHWAVE建立了高精度二维数值波浪水槽,采用日本2011年实测真实海啸波型系统研究了海啸波在岛礁上传播变形的规律,并且分析了波高、礁坪淹没水深和礁前斜坡坡度等因素对孤立波和真实海啸传播变形的影响。结果表明,相比孤立波,类海啸波的波长明显大于孤立波波长,在测点处引起的水面变化持续时间更长,同等波高情况下真实海啸波型比孤立波能够携带更多的能量,与岛礁的相互作用也更为复杂,在礁坪上形成的淹没水深约为孤立波的两倍。礁前斜坡坡度和礁坪淹没水深均对类海啸波的反射和透射系数有显著影响。随着礁前斜坡坡度的增加,反射系数和透射系数均逐渐增加。随着礁坪淹没水深的增加,反射系数逐渐减小,而透射系数逐渐增大。但是,反射系数和透射系数均随着入射波高的增加而逐渐减小。 相似文献
18.
19.
The run-up on offshore structures induced by the steep regular wave is a highly nonlinear flow with a free surface.This article focuses on the investigation of the steep regular wave run-up on a single vertical cylinder by solving the Navier-Stokes equations. A numerical wave tank is established based on the open-source package to simulate the wave scattering induced by a vertical cylinder. The VOF method is applied to capture the large deformation and breaking of the free surface. The numerical model is validated by experimental results. The relative wave run-ups on the front face and the back face along the centerline of a cylinder are analyzed. The changes of the relative run-ups with the wave steepness, the relative diameter and the relative depth are studied. It is found that the relative run-ups on the front face and the back face of the cylinder depend mainly on the wave steepness and the relative diameter,while the dependence on the relative depth is weak. The empirical formulae are proposed to calculate the relative run-ups in terms of the wave steepness of incident regular waves and the relative diameter of a cylinder. 相似文献
20.
以现代沉积考察为基础,结合粒度分析资料,对湖泊中沙坝的沉积特征进行了详细的探讨。研究认为峡山湖沙坝微相分为坝前、坝主体、坝后3个沉积单元。坝前受湖浪作用明显,沉积物以湖浪作用形成的浪成沙和冲洗沙为主,发育滩脊和席状沙沉积体。坝主体沉积物以厚度较大、受湖水及风改造明显的中细沙为主,可进一步细分为坝-滩复合体和坝-沙丘复合体。坝后受坝主体阻隔,丰水期为局限湖湾沉积,枯水期发育沼泽沉积。湖泊中沙坝的形成是在滨浅湖环境中水动力和岸线、地貌等因素的影响下,受湖浪、湖流以及暴露环境下风的改造等共同作用的结果,湖浪所派生的沿岸流对沙坝的演化起着至关重要的作用;丰水期沙坝体接受湖水动力的改造,枯水期沙坝体接受风的改造。 相似文献