共查询到20条相似文献，搜索用时 15 毫秒
2.
富锦－绥滨松花江大桥基础采用直径2.0 m的钻孔灌注桩。通过数据采集,由锚桩法测得的45 m试桩和自平衡测得的70 m试桩上段桩的荷载-沉降关系、竖向承载特性、桩侧摩阻力等进行对比分析。分析结果表明：在极限状态下,两者位移相差14.97 mm,侧阻力相差7.30%;长、短试桩各土层桩侧阻力的实测值都满足要求。在桩-土体系破坏之前、相同荷载条件下,两者位移的差值有变大的趋势,相同土层的桩侧摩阻力相吻合 相似文献
3.
This paper presents the results from a pile load testing program for a bridge construction project in Louisiana. The testing includes two 54-in. open-ended spun cast concrete cylinder piles, one 30-in. open-ended steel pile and two (30- and 16-in.) square prestressed concrete (PSC) piles driven at two locations with very similar soil conditions. Both cone penetration tests (CPTs) and soil borings/laboratory testing were used to characterize the subsurface soil conditions. All the test piles were instrumented with vibrating wire strain gauges to measure the load distribution along the length of the test piles and measure the skin friction and end-bearing capacity, separately. Dynamic load tests were performed on all test piles at different times after pile installations to quantify the amount of setup with time. Static load tests were also performed on the PSC and open-ended steel piles. Due to expected large pile capacities, the statnamic test method was used on the two open-ended cylinder piles. The pile capacities of these piles were evaluated using various CPT methods (such as Schmertmann, De Ruiter and Beringen, LCPC, Lehane et al. methods). The result showed that all the methods can estimate the skin friction with good accuracy, but not the end-bearing capacity. The normalized cumulative blow counts during pile installation showed that the blow count was always higher for the PSC piles compared to the large-diameter open-ended cylinder pile, regardless of pile size and hammer size. Setup was observed for all the piles, which was mainly attributed to increase in skin frictions. The setup parameters “ A” were back-calculated for all the test piles and the values were between 0.31 and 0.41. 相似文献
4.
In this paper research was presented on the development of a growth-rate-dependent model for pile set-up prediction using the restrike and static/statnamic load testing data collected from different projects. The data included: a) restrike records from ninety-five production piles and restrike and load test results of nine instrumented piles driven in soft clays from the relocation project of Highway No. 1 in Louisiana (LA-1); and b) restrike and static load testing data of five fully instrumented square PPC piles driven at four different bridge sites in various soil layers from sands to clays in Florida. Research effort was focused on the prediction of the ultimate shaft resistances with pile set-up formulated using the pile resistance growth rate-dependent model. The timeframe of interest was studied for a practical set-up magnitude such as 90% of the ultimate shaft resistance (Q 90). As an application of the rate-dependent model, it was found that piles at the LA-1 relocation project, in general, reached about 95% of the ultimate shaft resistances at the time of 2 weeks after pile installation. The strategy of incorporation of pile set-up in adjusting pile driving criteria or/and design during pile construction, such as the experience-based plan of a two-week waiting period adopted by Louisiana DOTD, was investigated and justified. 相似文献
5.
通过在多层软粘土地基中静力压入单桩的室内模型试验,对模型桩在整个沉桩过程中压桩力、桩动端阻力及桩动侧阻力随桩贯入深度的变化情况进行了研究,获得了桩在贯入不同土层分界面时阻力的变化规律以及桩周土体应力的分布特征。并对开口管桩和闭口管桩贯入试验情况进行了比较分析,揭示了不同桩端形式桩在贯入过程中桩动侧摩阻力的发展规律,以及分层土体中开口管桩贯入过程中土塞的变化情况。试验结果表明：在粘性土中沉桩时,压桩阻力主要来自桩端向下穿越土体产生的端阻力,而侧摩阻力较小;由于桩侧水平应力的释放使得同一深度点上的动摩阻力随着桩的下沉表现出不同程度的降低,出现摩擦疲劳。 相似文献
6.
The present study investigates the increasing in ultimate pile capacity and studied the soil plugging phenomenon and the incremental filing ratio for a modified type of open-ended pipe pile. The modification performed by adding steel plates as wings with special dimensions and fixed on the exterior face of the pipe pile wall at a location near the pile tip with specified dimensions. Five wings have used for each new model of pipe pile. These wings distributed in equal spacing along with the circumstances of the exterior wall of the open-ended pipe piles. The efficiency of the proposed type studied by modelling and manufacturing twelve piles (40 mm diameter, L/D = 15 and L/D = 20). Complete setup manufactured for installing and loading the piles in a constant rate of penetration. The model piles installed in poorly graded loose dry sand. The obtained results show that the proposed type has a higher ultimate bearing capacity. The percentage of increase reaches more than 50%. The development of the load capacity is due to the three effects. The first is increases of the exterior shaft friction, and the second effect creates a new end-bearing capacity under the constrained soil between the exterior wings. And the third effect is developing the end-bearing capacity under the soil plug inside open-ended pipe pile due to the first and the second effects. 相似文献
7.
Open-ended piles such as tubular piles or I-beams are used as foundations for offshore and nearshore construction. After the pile installation a load test to estimate the bearing capacity of these open-ended piles is necessary. Due to the offshore conditions and the high bearing capacity of the installed piles a static load test is not normally feasible. Therefore, dynamic load tests are carried out where the wave propagation due to an dynamic impact at the pile head is measured. The methods to estimate the bearing capacity from the measured signal of the dynamic tests were derived for solid pile profiles. It is questionable whether these evaluation techniques are applicable for open-ended piles. Hence, the influence of various important system parameters as well as the differences between static and dynamic load tests on open-ended piles is investigated in this paper. 相似文献
8.
Unlike conventional grouted micropiles, screw micropiles have been recently introduced to the foundation industry. Full-scale field tests of screw micropiles were carried out at a cohesive soil site. The screw micropiles have a diameter varying from 76 to 114 mm and a length varying from 1.6 to 3 m, and spiral threads welded on the lower half of the steel tubular shaft. Site investigation from cone penetration tests (CPT) and laboratory testing implies that the soil was medium to stiff, low plasticity clay. Six axial monotonic and three axial cyclic load tests were performed on three micropiles. One micropile was instrumented with strain gauges to investigate the shaft load distribution during loading. The axial cyclic loading was intended to simulate cyclic inertia load during vertical ground motions. Results showed that the micropiles behave as frictional piles during monotonic tests; the unit shaft resistance and adhesion coefficient were calculated and compared with results in the literature. The end installation torque was estimated using CPT shaft resistance and was shown to agree reasonably with the measured torque. Under axial cyclic loading, the micropiles underwent small cumulative displacements and the magnitude of the displacement decreased with increasing pile length and diameter. Cyclic loading redistributed the load transfer along different segments of the micropile. Negative skin resistance was observed along the smooth pile shaft when the pile underwent decreasing axial loading. 相似文献
9.
刚-柔性桩复合地基中刚性桩的荷载传递规律及变形性状明显不同于自由状态下的单桩,由于复合地基中刚性桩、柔性桩、土的互相作用,桩的工作性状要复杂得多。为了比较两者的承载变形特性,在温州地区进行同根桩在不同状态下静荷载对比试验,在静荷载试验过程中同步检测桩身应力情况,结合测试数据对桩沉降特性、荷载传递机理、压缩量特性进行了分析,分析结果对工程设计施工有一定的借鉴价值。 相似文献
10.
This paper presents the results of field tests performed to investigate the compressive bearing capacity of pre-bored grouted planted (PGP) pile with enlarged grout base focusing on its base bearing capacity. The bi-directional O-cell load test was conducted to evaluate the behavior of full scale PGP piles. The test results show that the pile head displacements needed to fully mobilize the shaft resistance were 5.9% and 6.4% D (D is pile diameter), respectively, of two test piles, owing to the large elastic shortening of pile shaft. Furthermore, the results demonstrated that the PHC nodular pile base and grout body at the enlarged base could act as a unit in the loading process, and the enlarged grout base could effectively promote the base bearing capacity of PGP pile through increasing the base area. The normalized base resistances (unit base resistance/average cone base resistance) of two test piles were 0.17 and 0.19, respectively, when the base displacement reached 5% Db (Db is pile base diameter). The permeation of grout into the silty sand layer under pile base increased the elastic modulus of silty sand, which could help to decrease pile head displacement under working load. 相似文献
11.
珊瑚地层是钙质砂和礁灰岩的统称。在珊瑚地层中开展预应力高强度混凝土管桩（PHC桩）的原位堆载测试,分析了桩?珊瑚地质的相互作用规律。采用光纤光栅传感技术采集加载过程中的试桩桩身应变,由计算获取桩身轴力,分析加载过程中珊瑚地层中PHC桩基础的承载特性。试验结果表明,（1）桩?土响应处于线弹性阶段;（2）桩的承载发挥状态与入土深度显著相关,且入土深度超过15倍桩径时桩端阻力发挥峰值;（3）桩的安装方式几乎不影响其在珊瑚地层中的承载性能,但贯入能量的大小则显著影响;（4）入土深度和贯入能量的大小,影响珊瑚地质的破碎程度,颗粒破碎显著影响珊瑚地质中桩的承载发挥特性。通过原位测试可知在珊瑚地质中在贯入深度在15倍桩径以内,入土深度与桩端阻力正相关,与桩侧摩阻力反相关。 相似文献
12.
The plugging of pipe piles is an important phenomenon, which is not adequately accounted for in the current design recommendations. An open-ended pipe pile is said to be plugged when the soil inside the pile moves down with the pile, resulting in the pile becoming effectively closed-ended. Plugging is believed to result in an increase in the horizontal stresses between the pile and the surrounding soil, which results in an increase in skin friction. A total number of 60 model pile tests are carried out to investigate the behavior of plugs on the pile load capacity and the effects of plug removal. Different parameters are considered, such as pile diameter–to–length ratio, types of installation in sands of different densities, and removal of the plug in three stages (50, 75, and 100 %) with respect to the length of plug. The changes in the soil plug length and incremental filling ratio (IFR) with the penetration depth during pile driving show that the open-ended piles are partially plugged from the outset of the pile driving. The pile reached a fully plugged state for pressed piles in loose and medium sand and partially plugged (IFR = 10 %) in dense sand. For driven piles, the IFR is about 30 % in loose sand, 20 % in medium sand, and 30 % in dense sand. The pile load capacity increases with increases in the length of the plug length ratio (PLR). The rate of increase in the value of the pile load capacity with PLR is greater in dense sand than in medium and loose sand. Based on test results, new empirical relation for the estimation of the load carrying capacity of open-ended piles based on the IFR is proposed. 相似文献
13.
原位试验是获取桩基设计参数和了解桩基力学性能的最客观、最可靠方法。基于现有疲劳机和千斤顶等试验设备,研制了桩顶静载和动载组合加载装置,为现场静、动载试验解决了一个技术性难题。利用该装置对某工程混凝土预制静压桩进行了模拟交通荷载的现场静、动载试验。通过单桩竖向抗压静载试验和动载试验,分析了静动载对桩身轴力分布、桩身侧摩阻力和基桩沉降的影响及其变化规律。试验结果表明：在静动载作用下桩身侧摩阻力的分布规律基本一致,并且随着振动次数的增加,桩身上部侧摩阻力减小、下部略有增加,但动载循环超过30万次后,侧摩阻力趋于稳定。 相似文献
14.
为了研究软岩地基桥桩的荷载传递性状、破坏机理,并获取在该地质条件下更为可靠的桩基计算参数,对秦巴山区软岩地基3根钻孔灌注试桩进行竖向静载试验。结果表明：秦巴山区软岩地基桥桩试桩荷载沉降曲线呈陡降型,实测竖向极限承载力为20 500kN,桩的破坏方式为桩身材料强度破坏;淤泥质亚黏土地层中的碎石起到一定的骨架作用,增强了此地层桩极限侧阻力,发挥极限侧阻力所需的桩土（岩）相对位移为4～8mm;强风化砾岩表现为加工软化型,发挥极限侧阻力所需的桩土（岩）相对位移为3～8mm;中风化砂砾岩表现为明显的加工硬化型,所需的桩岩相对位移大,且桩极限侧阻力的特征点不明显;淤泥质亚黏土地层桩侧阻力占总荷载的60%～70%,随着桩顶荷载的逐步加大,该地层桩侧阻力所占比例不断下降,而嵌岩段桩侧阻力所占比例逐渐上升,达到55%～65%,嵌岩段桩侧阻力沿桩深的分布曲线表现出非线性的特征;试桩为端承摩擦桩,桩端阻力约占桩顶荷载的20%左右,且未充分发挥,在上部结构允许的沉降范围内,适当增加桩端的沉降有利于端阻力的发挥;桩侧阻力先于端阻力发挥,建议单桩承载力设计时分别采用不同的端阻力和侧阻力安全系数。 相似文献
15.
通过机场—西华高速大直径超长钻孔灌注桩大吨位竖向单桩静载试验,分析了该地区大直径超长钻孔灌注桩的承载性状以及荷载传递机理。试验结果表明:试桩的Q-S曲线呈缓变型,桩端承载力占总荷载的比例均<10%,即均表现为摩擦桩特性;试桩的侧摩阻力自上而下逐步发挥,侧摩阻力和桩端阻力异步发挥且互相耦合;大直径超长钻孔灌注桩桩侧摩阻力的发挥与土层性质、土层埋深及桩顶荷载水平有关;在高荷载作用下桩侧上部土层摩阻力具有不同程度的软化现象,而中下部土层侧摩阻力具有不同程度的强化现象,甚至即使在最大加载情况下,桩身下部土层的侧摩阻力也并未完全发挥,因此在根据规范计算超长桩承载力时,不同深度土层的侧摩阻力应乘以相应不同的修正系数。 相似文献
16.
This paper presents the analyses of twelve prestressed concrete (PSC) instrumented test piles that were driven in different bridge construction projects of Louisiana in order to develop analytical models to estimate the increase in pile capacity with time or pile setup. The twelve test piles were driven mainly in cohesive soils. Detailed soil characterizations including laboratory and in situ tests were conducted to determine the different soil properties. The test piles were instrumented with vibrating wire strain gauges, piezometers, pressure cells that were monitored during the whole testing period. Several static load tests (SLTs) and dynamic load tests were conducted on each test pile at different times after end of driving (EOD) to quantify the magnitude and rate of setup. Measurements of load tests confirmed that pile capacity increases almost linearly with the logarithm of time elapsed after EOD. Case pile wave analysis program was performed on the restrikes data and was used along with the load distribution plots from the SLTs to evaluate the increase in skin friction capacity of individual soil layers along the length of the piles. The logarithmic linear setup parameter “A” for unit skin friction was calculated of the 70 individual clayey soil layers and was correlated with different soil properties such as undrained shear strength (Su), plasticity index, vertical coefficient of consolidation (cv), over consolidation ratio and sensitivity (St). Nonlinear multivariable regression analyses were performed, and three different empirical models are proposed to predict the pile setup parameter “A” as a function of soil properties. For verification, the subsurface soil conditions and setup information for additional 18 PSC piles collected from local database were used to compare the measured versus predicted “A” parameters from the proposed models, which showed good agreement. 相似文献
17.
根据超长桩的现场静载荷试验资料,分析了超长桩的单桩荷载传递特性。结果表明,超长桩表现出端承摩擦桩的特性,桩顶以下l/3桩长及桩端以上l/6范围内的桩侧摩阻力极限值接近规范推荐值,而中间部分的桩侧摩阻力远远大于规范值,表现出强化效应,桩端注浆桩的侧摩阻力强化效应更加明显。根据其荷载传递特性,提出了单桩极限承载力的估算公式,实例计算结果和实测结果较吻合。 相似文献
18.
Cone penetration test (CPT) is one of the most common in situ tests which is used for pile design because it can be realized as a model pile. The measured cone resistance ( qc) and sleeve friction ( fs) usually are employed for estimation of pile unit toe and shaft resistances, respectively. Thirty three pile case histories have been compiled including static loading tests performed in uplift, or in push with separation of shaft and toe resistances at sites which comprise CPT or CPTu sounding. Group method of data handling (GMDH) type neural networks optimized using genetic algorithms (GAs) are used to model the effects of effective cone point resistance ( qE) and cone sleeve friction ( fs) as input parameters on pile unit shaft resistance, applying some experimentally obtained training and test data. Sensitivity analysis of the obtained model has been carried out to study the influence of input parameters on model output. Some graphs have been derived from sensitivity analysis to estimate pile unit shaft resistance based on qE and fs. The performance of the proposed method has been compared with the other CPT and CPTu direct methods and referenced to measured piles shaft capacity. The results demonstrate that appreciable improvement in prediction of pile shaft capacity has been achieved. 相似文献
19.
A total of 27 piles were installed at the Engineering and Physical Science Research Council soft clay test site at Bothkennar, Scotland using the continuous-flight-auger boring technique. Twelve of the piles of different lengths and diameters were tested in axial compression, using the others as reaction piles. Various testing programmes were employed to investigate relationships between axial load, movement and rate of movement. Strain measurements were facilitated by installing exten"someters in the piles, thus enabling the distributions of load and shaft resistance down each pile to be evaluated. Shaft resistances were found to be approximately constant even though the clay is known to increase in strength with depth. Peak shaft resistances were found to be dependent on rate of movement while ultimate shaft resistances were dependent only on magnitude of movement. 相似文献
20.
由于基桩纵向截面形式的差异,竖向荷载作用下桩侧摩阻力和桩端阻力发挥存在明显的差异,尽管纵向截面异形桩在工程中得到了一定的应用,然而针对极限荷载下桩端和桩侧土体破坏形式的研究却相对较少。基于透明土材料和粒子图像测速（particle image velocimetry）技术,针对等体积的扩底楔形桩、楔形桩和等截面桩的承载特性及破坏形式进行对比模型试验,测得桩顶荷载-沉降曲线,研究了各级荷载下桩端和桩侧土体位移场的变化规律以及极限荷载下桩端和桩侧土体的破坏形式;同时分析了不同桩长情况下各类型桩的承载力特性。研究结果表明,在此试验条件下,扩底楔形桩的极限承载力约为常规楔形桩的3.5倍和等截面桩的2.5倍;极限荷载作用下各类型纵向截面异形桩桩端的破坏形式规律基本一致。 相似文献
|
