共查询到20条相似文献，搜索用时 21 毫秒
1.
Rubble mound breakwaters usually consist of armour, filter and core layers. The units used in the armour layer are natural rock or concrete. Although natural rock is usually preferred, it is not always possible to apply it. There are some advantages to using concrete units: they have a high stability coefficient under wave attack, and they are easily produced at work sites. Tetrapod and cube blocks are widely used in breakwaters as armour units.Rubble mound breakwaters are subjected not only to wave activity but also other types of environmental loading, such as earthquakes. Although rubble-mound breakwaters are most likely the most common type of breakwaters, they have received little attention regarding their response to seismic activity. The objective of this study is to present the dynamic response of a breakwater armoured by tetrapods placed by two different placement methods and armoured by cubes during seismic loadings experimentally and numerically. A shaking tank was developed for the experimental study. The breakwater models sit on a rigid bed, and the model scale is 1/50. A one-dimensional shaking tank was used to understand simple responses of the rubble mound breakwaters under seismic loads. The tank allows only one degree of freedom. A raining crane system was developed to achieve the same packing density and porosity for the core material. The shape of the model breakwater before and after the tests was measured using a profiler and was recorded by computer. However, crest lowering and the level of damage on slopes were determined from profiler records. The dynamic responses of the model breakwaters were also investigated using an image processing technique. For numerical simulation, software using finite element method was used.The results obtained from the experiment and numerical model may help designers build breakwaters armoured by artificial units. 相似文献
2.
Deformation of rubble-mound breakwaters under cyclic loads 总被引：1，自引：0，他引：1
Rubble-mound breakwaters usually consist of a core of small quarry-run rock protected by one or more intermediate layers or underlayers that separate the core from the cover layers, which are composed of large armor units. Failure of rubble-mound breakwaters may be due to effects such as removal or damage of the armor units, overtopping leading to scouring, toe erosion, loss of the core material, or foundation problems under waves. However, whether rubble mounds fail under seismic loads is unknown. High seismic activity can lead to large settlements and even to failure of the breakwaters. The design of coastal structures should take into account the most relevant factors in each case, including seismic loading. The objective of this study is to understanding the failure mechanisms of conventional breakwater structures under seismic loads on rigid foundations. Hence, an experimental study was carried out on conventional breakwater structures with and without toes, subjected to different dynamic loadings of variable frequencies and amplitudes, in a shaking tank. A shaking tank with a single degree of freedom was developed to study the simple responses of conventional rubble-mound breakwaters under cyclic loads. For each test, an automatic raining crane system was used to achieve the same relative density and porosity of the core material. The input motion induced horizontal accelerations of different magnitudes during the tests. The accelerations and the deformation phases of the model were measured by a data acquisition system and an image processing system. The experiments on the conventional rubble-mound type breakwater model were performed under rigid-bottom conditions. The model's scale was 1:50. Cyclic responses of breakwaters with toes and without toes were examined separately, and their behaviors were compared. The results were compared with a numerical study, and the material properties and failure modes were thus defined. 相似文献
3.
Berms deployed at the toe of conventional rubble mound breakwaters can be very effective in improving the stability of the armor layer. Indeed, their design is commonly tackled by paying attention to armor elements dimensioning. Past research studies showed how submerged berms can increase the stability of the armor layer if compared to straight sloped conventional breakwaters without a berm. To fill the gap of knowledge related to the interaction between breakwaters with submerged berm, waves and soil, this research aims to evaluate how submerged berms configuration influences the seabed soil response and momentary liquefaction occurrences around and beneath breakwaters foundation, under dynamic wave loading. The effects of submerged berms on the incident waves transformation have been evaluated by means of a phase resolving numerical model for simulating non-hydrostatic, free-surface, rotational flows. The soil response to wave-induced seabed pressures has been evaluated by using an ad-hoc anisotropic poro-elastic soil solver. Once the evaluation of the seabed consolidation state due to the presence of the breakwater has been performed, the dynamic interaction among water waves, soil and structure has been analyzed by using a one-way coupling boundary condition. A parametric study has been carried out by varying the berm configuration (i.e. its height and its length), keeping constant the offshore regular wave condition, the berm and armor layer porosity values, the water depth and the elastic properties of the soil. Results indicate that the presence of submerged berms tends to mitigate the liquefaction probability if compared to straight sloped conventional breakwater without a berm. In addition, it appears that the momentary liquefaction phenomena are more influenced by changing the berm length rather than the berm height. 相似文献
4.
In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the sea level in the protected area, which is relevant to the whole shadow zone circulation, including alongshore currents and seaward flows through the gaps. This study examines such a leading hydraulic parameter under the simplified hypothesis of 2D motion and presents a prediction model that has been validated by a wide ensemble of experimental data. Starting from an approach originally proposed by Dalrymple and Dean [(1971). Piling-up behind low and submerged permeable breakwaters. Discussion note on Diskin et al. (1970). Journal of Waterways and Harbors Division WW2, 423–427], the model splits the rise of the mean water level into two contributions: one is due to the momentum flux release forced by wave breaking on the structure, and the other is associated with the mass transport process. For the first time, the case of random wave trains has been explicitly considered. 相似文献
5.
A first approach to the behaviour, flow characteristics and stability, of mound breakwaters under oblique wave attack is undertaken by assuming that oblique incidence only affects the slope angle. For run-up and run-down this approach shows a reasonable degree of agreement with experimental data for small incidence angles (say up to 45°) becoming unreliable for large incidence angles. 相似文献
6.
7.
The main idea concerned with the design of berm breakwaters is to construct a less expensive structure with reshaping berm. An experimental study on the front slope stability of homogeneous berm breakwaters has been carried out in a large number of 2D model tests at Tarbiat Modares University. In this paper, the results of this experimental study are presented conjointly with a formula for estimation of berm recession as the most important parameter for describing the reshaping. This includes the influence of wave height and period, storm duration, berm width and elevation variations on the stability of berm breakwater with different armor stone sizes. A total of 222 tests have been performed to cover the impact of these parameters. According to the present research, one can observe that considering different armor stone sizes, berm width is a significant parameter concerning reshaping of a berm breakwater that has not been covered in previous works, so that as the berm width increases the amount of berm recession decreases. To assess the validity of the present formula, comparisons are made between the estimated berm recessions by this formula and formulae given by other researchers, showing that the estimation procedure foretells berm recession well according to the present data. It is observed that the recession estimated by the present formula has comparatively better correlation with the present experimental data, and also with other experimental results within the range of parameters tested. 相似文献
8.
This study presents a probabilistic neural network (PNN) technique for predicting the stability number of armor blocks of breakwaters. The PNN is prepared using the experimental data of Van der Meer. The predicted stability numbers of the PNN are compared with those of previous studies, i.e. by an empirical formula and a previous neural network model. The agreement index between the measured and predicted stability numbers by PNN are better than those by the previous studies. The PNN offers a way to interpret the network's structure in the form of a probability density function and it is easy to implement. Therefore, it can be an effective tool for designers of rubble mound breakwaters. 相似文献
9.
This paper presents the development of an Artificial Neural Network for the prediction of the wave reflection coefficient from a wide range of coastal and harbor structures. The Artificial Neural Network is trained and validated against an extensive database of about 6000 data, including smooth, rock and armor unit slopes, berm breakwaters, vertical walls, low crested structures, oblique wave attacks. The structure and data included in this database, as well as the approach used in this paper, follow the work done on wave overtopping within the CLASH project.In this new Artificial Neural Network 13 input elements are used to represent the physics of the reflection process taking into account the structure geometry (height, submergence, straight or non-straight slope, with or without berm or toe), the structure type (smooth or covered by an armor layer, with permeable or impermeable core) and the wave attack (water depth, wave height, wave length, wave obliquity, directional spreading).The selection of the input elements and of the algorithms used in the network is described based on an in-depth sensitivity analysis of the network performance.The accuracy of the network is quite satisfactory, being the average root mean squared error lower than 0.04. This value is consistent between the Artificial Neural Network calibrated on the original dataset and the one calibrated on boot-strapped datasets in which data reliability and structure complexity are considered.The performance of the network is compared for limited datasets with selected available literature formulae proving that this approach is able to estimate the experimental reflection coefficients with greater accuracy than the empirical formulae calibrated on these same datasets. 相似文献
10.
《Coastal Engineering》2006,53(5-6):395-417
This paper is the second part of the work presented by Garcia et al. [Garcia, N., Lara, J.L., Losada, I.J., 2004. 2-D numerical analysis of near-field flow at low-crested breakwaters. Coastal Engineering 51 (10), 991–1020]. In the mentioned paper, flow conditions at low-crested rubble-mound breakwaters under regular wave attack were examined, using a combination of measured data of free surface, bottom pressure and fluid velocities from small-scale experiments and numerical results provided by a VOF-type model (COBRAS) based on the Reynolds-Averaged Navier–Stokes (RANS) equations. This paper demonstrates the capability of the COBRAS model to reproduce irregular wave interaction with submerged permeable breakwaters. Data provided by the numerical model are compared to experimental data of laboratory tests, and the main processes of wave–structure interaction are examined using both experimental and numerical results. The numerical model validation is carried out in two steps. First, the procedure of irregular wave generation is verified to work properly, comparing experimental and numerical data of different cases of irregular wave trains propagating over a flat bottom. Next, the validation of the numerical model for wave interaction with submerged rubble-mound breakwaters is performed through the simulation of small-scale laboratory tests on different incident wave spectra. Results show that the numerical model adequately reproduces the main aspects of the interaction of random waves with submerged porous breakwaters, especially the spectral energy decay at the structure and the spectrum broadening past the structure. The simulations give good results in terms of height envelopes, mean level, spectral shape, root-mean-square height for both free surface displacement and dynamic pressure inside the breakwater. Moreover, large-scale simulations have been conducted, on both regular and irregular incident wave conditions. The overall pattern of the wave interaction with a large-scale submerged breakwater is adequately reproduced by the numerical model. The processes of wave reflection, shoaling and breaking are correctly captured. The good results achieved at a near prototype scale are promising regarding the use of the numerical model for design purposes. 相似文献
11.
12.
Stability formulae for armour layers of rubble mound breakwaters are usually being applied assuming perpendicular wave attack. Often the effects of oblique waves are neglected. This is however a conservative assumption since the stability of armour slopes generally increases for oblique waves. New wave basin tests have been performed to assess the effects of oblique waves on the stability of rock slopes and the stability of cube armoured rubble mound breakwaters. The physical model tests were focussed on wave directions between perpendicular (0°) and parallel (90°). The test programme included tests with long-crested waves and tests with short-crested waves. The results show that for rock slopes the influence of oblique waves is larger for long-crested waves. Based on the test results a design guideline is provided to account for effects of oblique waves on the stability of rock slopes, armour layers with a double layer of cubes, and armour layers with a single layer of cubes. 相似文献
13.
In this study, a mathematical model has been developed that can compute various hydrodynamic characteristics of a multiple-row curtainwall-pile breakwater. To examine the validity of the developed model, laboratory experiments have been conducted for double- and triple-row breakwaters with various combinations of drafts of curtain walls, porosities between piles, and distances between rows. Comparisons between measurement and prediction show that the mathematical model adequately reproduces most of the important features of the experimental results. As a whole, the transmission coefficient decreases with an increase in relative water depth, whereas the reflection coefficient, normalized run-up and force exhibit an opposite trend in their variations. With fixed values of the draft of the curtain wall and the porosity of lower perforated part of the first row of a double-row breakwater, as these values of the second row increase and decrease, respectively, the transmission coefficient decreases, as expected. On the other hand, their effects on wave reflection, run-up, and wave force change with the relative depth. As for the distance between the rows, the transmission coefficient becomes a maximum when it is about one half of the wave length, suggesting that this condition should be avoided to achieve the advantage of the breakwater in reducing wave transmission. It is shown that for prototype breakwaters, on an average, the transmission coefficient would be smaller than 0.3 for wave periods less than 6.0 s, and it would be about 0.45 even for the wave period of 9.0 s, although there would be a variation depending on the geometry of the breakwater. It is also shown that wave transmission is significantly reduced by multiple-row breakwaters compared with a single-row breakwater, while the difference between double-row and triple-row breakwaters is marginal. Finally, engineering monograms are provided for double-row breakwaters to be used in practical engineering applications of the breakwaters. 相似文献
14.
Performance of solid and perforated U-type breakwaters under regular and irregular waves 总被引：1，自引：0，他引：1
An experimental investigation of U-type breakwaters was carried out in a laboratory channel. Both regular and irregular waves were used during testing. Two types of breakwaters such as solid and perforated were studied to analyse the porosity effect of structures. In order to investigate performance of these breakwaters for different immersion depths, four depths of immersions of the solid and perforated breakwaters were selected. Different wave groups were generated over these breakwaters, and the transmission, reflection and energy dissipation characteristics of each breakwater were determined. Three coefficients such as transmission, reflection and energy dissipation coefficients, which were named as Ct, Cr, and Cl, respectively, were used during the evaluation of the test results. The most important parameters governing performance of these breakwaters were determined by using earlier investigations and experimental results. These parameters were expressed as a dimensionless group by using π theory. Based on the test results, empirical expressions were formulated to describe the Ct, Cr, and Cl for different immersion depths of solid and perforated breakwaters under regular and irregular waves. 相似文献
15.
Physical model tests have been performed in two different wave flumes to analyse the threshold of stone movement and quantify the frequency and length of displacements due to head-on wave attacks at a reshaping breakwater. Data on stone movements were obtained from the observation of cumulative displacements at the end of each wave attack and from video records during the attack. Threshold conditions, frequency of movement and displacement length are expressed as function of a suitably modified stability number.A simple model is defined relating longshore transport due to oblique wave attack to stone mobility. The transport model is based on the assumption that movement statistics is affected by obliquity only through the appropriate mobility index and that stones move during up- and down-rush in the direction of incident and reflected waves. Without any calibration, results compare favourably with experimental data available in literature in the range of low mobility conditions where movement statistics was observed. A calibration is provided in order to obtain an accurate transport formula valid in a wide mobility range i.e. for reshaping breakwaters and up to gravel beaches. 相似文献
16.
Reflection of Oblique Incident Waves by Breakwaters with Partially-Perforated Wall 总被引：11，自引：6，他引：11
The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity poten-tials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed. 相似文献
17.
Berm breakwaters are rubble mound structures in which the seaward slope of the initial profile may be reshaped to become more stable under severe wave attack. The stones in the seaward slope move from the initial slope to an equilibrium profile. A 2D experimental study has been carried out in a wave flume at a hydraulic laboratory of Tarbiat Modares University to study the effects of sea state and structural parameters on the reshaped profile parameters of such breakwaters. A series of 287 tests have been performed to cover the effect of various sea state conditions such as wave height, wave period, number of waves and water depth at the toe of the structure, and structural parameters such as berm width, berm elevation above still water level and armor stone size. All the tests have been done employing irregular waves with a JONSWAP spectrum. In this paper, first the reshaped profiles are schematized, and then the key parameters of the reshaped seaward profiles such as step height, step length and depth of intersection point of initial and reshaped profile are investigated, using results of this experimental work. Eventually, formulae that include some sea state and structural parameters are derived for estimation of the reshaped profile parameters. To assess the validity of the proposed formulae, comparisons are made between the estimated parameters of reshaped profiles by these formulae and earlier formulae given by other researchers. The comparisons show that the estimation procedure foretells reshaping parameters well and with less scatter according to the present data and also other experimental results within the range of parameters tested. 相似文献
18.
Yao Guoquan Ma Zhixiong Ding Bingcan Prof. Senior Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing Senior Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing 《中国海洋工程》1993,(3)
This paper proposes ten types of improved floating breakwaters for experiment with regular waves, based on the experience in the development and manufacture of existing floating breakwaters both at home and abroad, and on the results of experimental studies on the hydraulic characteristics of several types of floating breakwaters. The wave heights before and behind the breakwaters are measured, the movements of floating breakwaters are observed and the chain forces of the floating breakwaters are measured. The paper studies and compares the hydraulic characteristics of the improved rectangular floating breakwaters of which the internal and external structures and their installation methods are changed. Finally the optimal type of structure is selected through experiments. 相似文献
19.
This paper presents a mathematical model which computes the hydrodynamic characteristics of a curtainwall–pile breakwater (CPB) using circular piles, by modifying the model developed for rectangular piles by Suh et al. [2006. Hydrodynamic characteristics of pile-supported vertical wall breakwaters. Journal of Waterway, Port, Coastal and Ocean Engineering 132(2), 83–96]. To examine the validity of the model, laboratory experiments have been conducted for CPB with various values of draft of curtain wall, spacing between piles, and wave height and period. Comparisons between measurement and prediction show that the mathematical model adequately reproduces most of the important features of the experimental results. The mathematical model based on linear wave theory tends to over-predict the reflection coefficient as the wave height increases. As the draft of the curtain wall increases and the porosity between piles decreases, the reflection and transmission coefficient increases and decreases, respectively, as expected. As the relative water depth increases, however, the effect of porosity disappears because the wave motion is minimal in the lower part of a water column for short waves. 相似文献
20.
The short communication presents application of the conventional Van der Meer stability formula for low-crested breakwaters for the prediction of front slope erosion of statically stable berm breakwaters with relatively high berms. The method is verified (Burcharth, 2008) by comparison with the reshaping of a large Norwegian breakwater exposed to the North Sea waves. As a motivation for applying the Van der Meer formula a discussion of design parameters related to berm breakwater stability formulae is given. Comparisons of front erosion predicted by the use of the Van der Meer formula with model test results including tests presented in Sigurdarson and Van der Meer (2011) are discussed. A proposal is presented for performance of new model tests with the purpose of developing more accurate formulae for the prediction of front slope erosion as a function of front slope, relative berm height, relative berm width, method of armour stone placement, and hydraulic parameters. The formulae should cover the structure range from statically stable berm breakwaters to conventional double layer armoured breakwaters. 相似文献