共查询到20条相似文献，搜索用时 85 毫秒
1.
滇西北中甸普朗斑岩铜矿流体包裹体初步研究 总被引：23，自引：0，他引：23
普朗斑岩铜矿位于三江地区义敦岛弧南端的中甸弧,是在晚三叠世甘孜.理塘洋盆向西俯冲过程中形成的一个大型.超大型矿床.通过显微测温学和激光拉曼谱学研究,发现普朗斑岩铜矿含矿石英脉中广泛发育富液相包裹体、含CO2三相/两相包裹体、含子晶多相包裹体.子晶种类复杂,盐类矿物主要有石盐、钾盐、方解石、石膏.金属矿物主要为黄铜矿和赤铁矿.流体包裹体中发现有4种流体,即高盐度岩浆流体、含CO2低盐度流体、中等盐度流体以及少量低盐度水溶液.高盐度岩浆流体的均一温度范围457～245℃,均一压力范围(259.33-25.43)×105 Pa,盐度为34%-54%NaCI,密度为1.12-1.07 g/cm3,富含Na、K、Ca、Cu、Fe、CO2、Cl、S等成分.原始岩浆流体可能是由中酸性岩浆上升至中间岩浆房后直接出溶而成,并汇聚在岩浆房的顶部.在甘孜.理塘洋盆的俯冲过程中,岩浆流体在流体内压和洋盆俯冲所产生的主压应力场的共同作用下,可以间歇性地从岩浆房上涌,为早期岩浆活动(226±3)～(228±3)Ma所形成的岩浆.热液系统提供了持续的矿质和热源.含CO2低盐度流体与高盐度岩浆流体的相分离作用是导致普朗斑岩铜矿主成矿期网脉状.浸染状矿化的主要原因. 相似文献
2.
西藏冈底斯三处斑岩铜矿床流体包裹体及成矿作用研究 总被引：22，自引：6，他引：16
对西藏冈底斯斑岩铜矿带中的驱龙、冲江斑岩铜矿床和与斑岩有关的帮浦铜多金属矿床进行了流体包裹体岩相学、显微测温和激光拉曼探针分析。对斑岩中斑晶石英、硅化脉石英和热液矿物硬石膏内流体包裹体的观测表明,与成矿有关的流体包裹体可以分为气相包裹体、液相包裹体、含子晶的多相包裹体等3类。它们的均一温度变化较大（191～550℃）,气相包裹体与含子晶多相包裹体的均一温度相近,主要集中于300～550℃之间。流体的盐度ω（NaCleq）为1．91％～66．75％,含石盐子晶包裹体的盐度ω（NaCleq）范围为32．70％～66．75％。激光拉曼光谱分析表明,子晶以石盐为主,并有较多的黄铜矿;气相包裹体和液相包裹体的气相中含有CO2。低密度的气相包裹体与高密度的液相包裹体、高盐度的含子晶包裹体共生,其均一温度范围一致,但盐度相差较大,指示成矿流体有不混溶作用或沸腾作用。成矿流体来自于岩浆的出溶;金属硫化物直接来源于岩浆。斑晶石英内流体包裹体中的不混溶作用与岩浆的初始沸腾有关;硅化脉石英捕获的流体包裹体与岩浆的二次沸腾有关;而硬石膏内流体包裹体的不混溶与两种不同性质流体的混合作用有关。斑晶石英中包裹体内的黄铜矿子晶是岩浆流体高金属含量的表征而不是矿化开始的标志。冈底斯成矿带内斑岩铜矿的成矿始于岩浆期后高温阶段,随后的高-中温热液阶段是流体大量沉淀矿质的重要时期。 相似文献
3.
斑岩铜矿是主要的铜资源,是矿床研究和勘查的重要目标。斑岩铜矿按其与板块构造的关系可分为2种:俯冲带斑岩铜矿和碰撞造山带斑岩铜矿,它们在成矿流体方面有很多区别,其中较大的差别是碰撞造山带斑岩铜矿的钾化蚀变带比俯冲带斑岩铜矿的钾化蚀变带强得多,且范围也相对较宽。文章简述了这2种斑岩矿床的主要地质特征,着重从流体包裹体、蚀变作用和稳定同位素研究来探讨斑铜矿床成矿流体的主要特征,包括成矿流体的成分、形成温度和压力,氢、氧、碳和硫稳定同位素组成。这两种类型的斑岩铜矿中主要发育5种包裹体:M熔体包裹体;Ⅰ液体包裹体;Ⅱ气体包裹体;Ⅲ含子矿物的多相包裹体和CO2_H2O包裹体。Ⅱ类和Ⅲ类包裹体常共存,且均一温度相似,表明成矿流体经历了不混溶和沸腾作用。在Ⅲ类含子矿物的包裹体中发现了含金属硫化物(黄铜矿、黄铁矿)和氧化物(赤铁矿、磁铁矿)子矿物。在斑岩金矿和碰撞造山带的斑岩铜矿中出现CO2_H2O包裹体,在斑岩的斑晶和一些早期石英脉的石英中可见到熔体包裹体以及熔体_流体包裹体,它们代表斑岩岩浆的样品,说明斑岩铜矿的形成经历了岩浆和热液阶段。最近的研究表明,斑岩铜矿的初始流体是中等盐度和密度的岩浆流体。这种流体在上升过程中因压力释放而发生沸腾,形成气体包裹体和含子矿物的高盐度包裹体。 相似文献
4.
为了探讨西藏冈底斯斑岩铜矿带帮浦铜多金属矿床流体的来源及演化过程,对矿体中的石英斑晶、辉钼矿石英脉、铅锌矿石英脉及方解石脉中所含的流体包裹体进行了岩相学、显微测温和激光拉曼探针以及硫同位素研究。结果表明:与成矿有关的流体包裹体可以分为富气相包裹体、富液相包裹体、含子晶多相包裹体3个类型。流体包裹体的均一温度、盐度及密度测定值均可分为两个区间,分别为300~350℃、390~440℃,6.96~11.63 wt%NaCl、16.76~23.7wt%NaCl及1.05~1.15g/cm3、0.40~1.00 g/cm3。含石盐子晶包裹体所对应的盐度范围是39.38~56.1wt%NaCl。激光拉曼光谱分析表明,含子晶流体包裹体中子矿物为石盐、黄铜矿、白铁矿等,气相包裹体和液相包裹体中气相中含有CO2。石英斑晶与辉钼矿石英脉中低密度气相包裹体与高密度液相包裹体、高盐度含子晶包裹体共生,其均一温度范围一致,但盐度相差较大,指示成矿流体有不混溶作用或沸腾作用,成矿流体来自于岩浆的出熔,金属硫化物直接来源于岩浆;而铅锌矿石英脉与两种不同性质流体的混合作用有关。 相似文献
5.
滇西北雪鸡坪斑岩铜矿流体包裹体初步研究 总被引：11，自引：2，他引：9
雪鸡坪中型斑岩铜矿床位于三江地区义敦岛弧南端的中甸弧,成矿斑岩为石英闪长玢岩和石英二长斑岩,属于印支期产物。含矿岩体蚀变分带明显,由中心向外发育强硅化带→石英绢云母化带→粘土化-石英绢云母化带→青磐岩化带,工业矿体赋存于斑岩体中心强硅化和石英绢云母化带内。矿化类型以网脉状矿化为主,细脉浸染状矿化不发育。本文对主要矿化阶段石英脉中的流体包裹体系统进行了包裹体岩相学、显微测温学和激光拉曼谱学研究,发现与成矿有关的流体包裹体可以分为水溶液包裹体、CO2包裹体和含子矿物包裹体3类,子矿物主要为石盐、方解石、赤铁矿和少量CaCl2水合物及不透明硫化物。其中含子矿物包裹体均一温度为230～420℃,盐度为33．48％～75．40％NaCl equiv．,密度为1．01～1．09g／cm^3。激光拉曼光谱分析表明,包裹体的液相成分主要为H2O,气相成分为H2O和CO2。早期水溶液包裹体和CO2包裹体共生,其均一温度相近,以及纯CO2包裹体的发现,指示成矿流体存在不混溶现象,这种不混溶是由原始岩浆流体“二次沸腾”作用产生的。CO2相分离、温压条件降低和pH值升高是雪鸡坪斑岩铜矿硫化物沉淀的主要原因。晚期低温、低盐度的流体可能来源于大气降水与岩浆流体的混和,对矿化的意义不大。 相似文献
6.
江西德兴朱砂红斑岩铜矿流体包裹体研究 总被引：1，自引：0，他引：1
内容提要：朱砂红斑岩铜矿位于德兴斑岩铜矿矿集区的西北方向,紧邻铜厂铜矿。本文在前人有关德兴铜矿研究基础上,以铜矿流体包裹体为研究内容,通过野外详细的岩芯采样,室内石英斑晶、石英脉和方解石脉中包裹体测试及数据整理分析后初步发现：朱砂红斑岩铜矿流体包裹体大致可以分成五大类型（富液型包裹体、富气型包裹体、含CO2气液两相型包裹体、含子矿物多相型和固液两相型）;相比铜厂整体成矿温度略低,盐度略高;由成矿流体压力47.27~184.47MPa,推导出成矿深度达2~4km,以及激光拉曼测试结果—流体中含有CO2、H2S和CH4等挥发分气体,它们可能与Au等元素的运移成矿有关。因此,从包裹体性质推测朱砂红铜矿不只是斑岩铜矿,可能是浅成热液斑岩型铜金矿床。此外,朱砂红矿区成矿流体来源至少有两种：高温岩浆流体和大气降水。伴随流体演化期次大致可以划分出三个成矿阶段：硅酸盐硫化物阶段、石英-硫化物阶段（即主成矿阶段,温度：200~340℃,盐度：2.0~15wt.%NaCl）、碳酸盐-硫酸盐硫化物阶段。同时,均一温度、盐度及压力等暗示在流体演化和成矿过程中岩浆流体发生过沸腾或不混溶作用。 相似文献
7.
江西德兴朱砂红斑岩铜矿流体包裹体特征及其成矿意义 总被引：1，自引：0，他引：1
朱砂红斑岩铜矿位于德兴斑岩铜矿矿集区的西北方向,紧邻铜厂铜矿.本文在前人有关德兴铜矿研究基础上,以铜矿流体包裹体为研究内容,通过野外详细的岩芯采样,室内石英斑晶、石英脉和方解石脉中包裹体测试及数据整理分析后初步发现:朱砂红斑岩铜矿流体包裹体大致可以分成五大类型(富液型包裹体、富气型包裹体、含CO2气液两相型包裹体、含子矿物多相型和固液两相型);相比铜厂整体成矿温度略低,盐度略高;由成矿流体压力47.27～184.47 MPa,推导出成矿深度达2～4 km,以及激光拉曼测试结果——流体中含有CO2、H2S和CH4等挥成份气体,它们可能与Au等元素的运移成矿有关.因此,从包裹体性质推测朱砂红铜矿不只是斑岩铜矿,可能是浅成热液斑岩型铜金矿床.此外,朱砂红矿区成矿流体来源至少有两种:高温岩浆流体和大气降水.伴随流体演化期次大致可以划分出3个成矿阶段:硅酸盐硫化物阶段、石英-硫化物阶段(即主成矿阶段,温度:200～340℃,盐度:2.0％～15％NaCl)、碳酸盐-硫酸盐硫化物阶段.同时,均一温度、盐度及压力等暗示在流体演化和成矿过程中岩浆流体发生过沸腾或不混溶作用. 相似文献
8.
西藏甲玛铜多金属矿床成因研究——来自流体包裹体的证据 总被引：1，自引：0，他引：1
甲玛铜多金属矿床位于西藏冈底斯斑岩铜矿带东段,是近年来勘探发现的超大型斑岩-矽卡岩型铜多金属矿床。通过冷热台显微观察与测温、扫描电镜、激光拉曼探针测试,对甲玛矿床各成矿阶段典型矿物的流体包裹体研究表明,成矿流体富含挥发分,临界相均一的流体来自岩浆超临界流体出溶,主成矿阶段具有沸腾包裹体组合特征,有机质包裹体荧光效应显著。显微测温结果显示,岩浆-热液阶段斑岩中石英斑晶的流体包裹体均一温度范围为250～540℃,含石盐子晶高盐度包裹体盐度范围为35～61(wt%)NaCl.eq,中等盐度的临界均一的气液包裹体盐度范围为3～29(wt%)NaCl.eq,岩浆期后热液阶段斑岩、角岩中石英脉的流体包裹体均一温度范围为210～410℃,盐度范围为33～41(wt%)NaCl.eq,与其不混溶共生的中低盐度气液两相流体包裹体盐度范围为5～25(wt%)NaCl.eq。矽卡岩阶段矿物均一温度范围为130～360℃,盐度范围为3～41(wt%)NaCl.eq,从岩浆热液过渡阶段到石英-硫化物阶段均一温度与盐度呈阶梯式降低趋势。斑岩体石英的流体包裹体中含有较多黄铜矿子矿物,岩浆结晶分异过程中已经具成矿元素的富集。激光拉曼探针测试结果显示,成矿早期至主成矿期矿物流体包裹体气相成分主要为CO2、CH4和N2,各阶段矿物流体包裹体气相成分具有继承性。成矿流体为高温度高盐度,富含CO2、CH4的流体。成矿流体主要源于岩浆,后期混有大气降水。当岩浆热液上升时因压力的突然释放造成高温含矿热流体发生减压沸腾,CO2和CH4等气体大量逃逸,导致成矿物质快速沉淀。矿床在成因上与岩浆-热液成矿作用密切相关。 相似文献
9.
西藏南木斑岩铜钼矿床的流体包裹体研究 总被引：15，自引：2，他引：15
南木斑岩铜钼矿床是西藏冈底斯东段铜多金属成矿带中的典型斑岩矿床。流体包裹体研究显示与成矿有关的包裹体可以分为液相包裹体、气相包裹体和含子晶多相包裹体三类，它们的均一温度为315～526℃，盐度变化大，含石盐子矿物包裹体的盐度ω(NaCleq)33．1％～52．98％。激光拉曼探针成分分析表明，黄铜矿等子矿物相存在于高盐度包裹体中，部分液相包裹体和气相包裹体含有一定量的CO2。含子矿物包裹体与液相包裹体、气相包裹体共存．且均一温度相近，盐度相差很大，表明成矿流体经历了沸腾作用。成矿流体是富含成矿金属元素的高盐度、高温岩浆流体，岩浆热液提供了主要金属物质。 相似文献
10.
西藏多不杂斑岩铜矿床高温高盐度流体包裹体及其成因意义 总被引：22，自引：1，他引：22
多不杂铜矿为班公湖—怒江缝合带上发现的第一处大型斑岩铜矿床,矿床位于羌塘—三江复合板片南缘的多不杂构造岩浆带中。多不杂斑岩铜矿总体上具有典型的斑岩铜矿矿石特征和蚀变分带特点,围绕斑岩体从岩体中心向外,可以划分出三个主要的蚀变带,依次为钾硅化 绢英岩化带、绢英岩化带和黄铁矿化—角岩化带。矿床以岩体内部和外部均发育强烈的磁铁矿化蚀变、而外围青磐岩化带不发育等特征有别于国内其他斑岩铜矿。对斑岩铜矿的流体包裹体特征和均一测温结果表明斑岩铜矿石英含有丰富的流体包裹体,包裹体类型众多,而以大量发育含子矿物多相包裹体为突出特征。子矿物种类有石盐、钾盐、赤铁矿、红钾铁盐、石膏、黄铜矿等,有时一个包裹体含有多达5~6个子矿物,在我国其他斑岩铜矿中是不多见的。金属子矿物大量发育表明流体成矿金属元素含量很高。成矿流体由来自岩浆的高温、高盐度流体和以天水成因为主的中低温、低盐度流体两个流体端员组份组成。高温、高盐度流体为主要成矿流体,以含子矿物多相流体包裹体为代表,其形成温度>450℃,盐度在28%~83%NaClequ.,平均达到58%~60%NaClequ.,流体组分主要属于H2O-NaCl-KCl-FeCl2体系。高温高盐度流体是在浅成条件下于岩浆结晶的最后阶段从浅部岩浆中直接出溶形成的。中低温、低盐度流体主要来源于天水或天水与晚期岩浆热液的混合,温度在360℃以下,盐度3.71%~14.15%NaClequ.。含矿硫化物主要在300~420℃温度区间沉淀,沉淀富集主要与温度降低有关,多不杂斑岩铜矿为与浅成斑岩体侵入有关的高温岩浆热液型斑岩铜矿。与世界上其他斑岩铜矿相比,多不杂斑岩铜矿具有与Bingham和Grasberg等世界级超大型斑岩铜矿相似的流体包裹体和蚀变分带特征,暗示该矿床具备形成超大型斑岩铜矿的潜力。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
20.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献