首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
对地面三维激光扫描仪所获取的海量点云进行建筑物立面数据的提取,有利于提高后续分割拟合、三维建模及变化检测等处理的效率和稳定性。因此本文针对建筑立面点云数据的特点,提出了一种基于相邻扫描点角度间隔直方图的提取方法。首先介绍了固定式三维激光扫描获取的数据特点,然后对基于扫描线的建筑物立面数据提取方法应用于固定式三维激光扫描数据的局限性进行了分析,在此基础上提出了统计扫描角度范围内指定大小(如1°×1°)格网内扫描点的个数,以生成相邻扫描点角度间隔的二维直方图并转换成灰度图像,通过二值化和连通区域标记方法提取了建筑立面数据。试验证明本文方法是行之有效的。  相似文献   

2.
以地面三维激光扫描建筑物数据为对象,提出一种快速提取建筑物平面边界线算法。将点云数据先进行目标分割,然后转化为二维的深度图像,探测深度图像的边界,利用深度值与点云坐标的对应关系提取建筑物点云边界线。通过实际数据的实验,验证了算法的可行性。  相似文献   

3.
孟敏  李嘉  陈小浩  田建 《测绘工程》2013,22(1):31-34
针对三维激光扫描数据处理过程中的数据拼接、纹理映射、目标识别等问题,提出一种新的三维激光扫描距离图像的角点提取算法,旨在为相邻测站问数据拼接提供粗配准的对应点.文中通过把三维激光扫描仪获得的单站距离图像转化为二维深度图像,利用已有的SUSAN算子提取出深度图像的角点,反算深度图像的角点到距离图像坐标系下实现角点的提取.利用2站间4个公共角点作为粗配准进行2站数据的ICP配准,利用配准的准确度验证该角点提取算法的有效性.  相似文献   

4.
三维激光扫描技术能够快速、有效地获取隧道点云数据,可用于提取地铁隧道的形变信息,但隧道点云数据中包含着噪声点、离群点,需要滤波去除,目前已有滤波算法不适用于隧道环境。文中采用统计特征去除部分噪声点,利用区域增长方法初步提取隧道壁部分点云作为RANSAC算法种子点,进一步利用RANSAC算法拟合数学模型提取隧道壁全部点云数据,并利用RANSAC点云拟合模型对隧道盾构体施工精度进行评估。实验结果表明了方法的有效性。  相似文献   

5.
ICP算法及其在建筑物扫描点云数据配准中的应用   总被引:5,自引:1,他引:4  
郑德华 《测绘科学》2007,32(2):31-32
ICP算法是三维激光扫描数据处理中点云数据配准的一种高水平的数学方法。本文全面地回顾了ICP算法的研究背景,并重点阐述了迭代最近点法ICP的计算过程及其主要的改进算法;通过建筑物三维激光扫描数据的采集,对基于ICP算法的点云数据配准过程进行了详细地分析。实验分析表明三维激光扫描数据配准后的点云数据质量较大程度上依赖于专业技术人员的数据处理经验和专业知识。  相似文献   

6.
地基三维激光扫描数据具有高精度、高空间分辨率的特点,能够改变传统的单点变形观测模式,使传统的点测量向“形测量”转化,因而大量的变形监测数据使得通过数学统计的方法探测变形量小于测量精度的微小变形成为可能。利用高分辨率三维激光扫描数据的微小变形统计分析方法,提出了基于反射值影像和BaySAC的拼接方法提高拼接精度;通过拟合方式提高整体分析精度,而影响拟合精度的主要因素为粗差,因此采用RanSAC算法剔除粗差,提高拟合的精度;然后利用格网化方法消弱偶然误差、修正拼接误差,最终得到变形量。采用建筑墙面及地铁隧道的点云数据进行了微小变形检测的实验,证明了该方法的有效性。  相似文献   

7.
点云数据直接缩减方法及缩减效果研究   总被引:1,自引:0,他引:1  
郑德华 《测绘工程》2006,15(4):27-30
分析了国外点云数据处理中数据缩减方法的研究现状,针对实际工程中三维激光扫描数据采集的过密情况,提出利用扫描间隔进行点云数据直接缩减的方法,并编程实现所提出的算法。通过对真实的三维激光扫描点云数据的缩减处理,建立点云数据直接缩减的预测模型。  相似文献   

8.
利用车载激光扫描系统对实验区域进行三维地籍测量,针对基于MLS(车载激光扫描系统)数据的三维地籍建模进行了精度分析。实验结果表明,MLS数据能够精确提取建筑物的外部结构以及特征点三维信息,且相对于传统的测量模式具有高效便捷的优点,精度指标能够满足城市加速发展引起的地物地貌变化更新的要求,在三维地籍测量中具有很好的适用性。  相似文献   

9.
从激光扫描数据中进行建筑物特征提取研究   总被引:42,自引:4,他引:42  
提出了一套基于建筑物几何特征的信息挖掘方案,并具体介绍了研究中采用的一些原理、方法与实用算法,从而可以直接从激光扫描数据中提取建筑物的平面外轮廓信息。利用本方案对车载激光扫描系统获取的城市建筑物试验数据进行了具体的处理,并给出了三维建模和可视化表达结果。  相似文献   

10.
三维激光扫描技术使传统的工程测量从静态的单点测量发展到动态的跟踪测量与三维立体测量领域。从用户角度出发,简要介绍了地面固定式三维激光扫描仪的基本原理、主要特点、性能指标,阐述了获取高精度三维扫描数据成果的过程。不是利用详尽的公式和实验进行精度分析,而是着重分析从采集数据到点云数据处理过程中数据质量的误差来源,详细分析其中原因,并且在已有研究分类的基础上,重新进行归类,最后介绍了国内外产品。  相似文献   

11.
 采用Landsat TM数据分析了阿克苏河—塔里木河断面水质污染状况,通过波段的DN值和常规监测数据建立能反映水质状况的 污染物监测模型。结果发现,将2000年常规监测数据代入模型后,与遥感数据的结果基本吻合| 重建阿克苏河—塔里木河的连续水体 污染变化曲线,得出污染物浓度随着远离上游而增加。  相似文献   

12.
13.
The hard-rock hilly Aravalli terrain of Rajasthan province of India suffers with frequent drought due to poor and delayed monsoon, abnormally high summer-temperature and insufficient water resources. In the present study, detailed analysis of meteorological and hydrological data of the Aravalli region has been carried out for the years 1984–2003. Standardised Precipitation Index (SPI) has been used to quantify the precipitation deficit. Standardised Water-Level Index (SWI) has been developed to assess ground-water recharge-deficit. Vegetative drought indices like Vegetation Condition Index (VCI) and Temperature Condition Index (TCI) and Vegetation Health Index (VHI) have been computed using NDVI values obtained from Global Vegetation Index (GVI) and thermal channel data of NOAA AVHRR satellite. Detailed analyses of spatial and temporal drought dynamics during monsoon and non-monsoon seasons have been carried out through drought index maps generated in Geographic Information Systems (GIS) environment. Analysis and interpretation of these maps reveal that negative SPI anomalies not always correspond to drought. In the Aravalli region, aquifer-stress shifts its position time to time, and in certain pockets it is more frequent. In comparison to hydrological stress, vegetative stress in the Aravalli region is found to be slower to begin but quicker to withdraw.  相似文献   

14.
因受机场工程设计软件的测量数据容量限制,基于LiDAR采集、点云分类后得到的地面点云数据LAS不能完整应用于目前设计软件进行设计计算。本文通过对拟选技术方案的筛选,提出了利用FME Workbench数据处理功能,结合VBA编程获取外部方格网平面数据的方法。该方法在FME Workbench中实现了地面点云数据构建TIN、采用逐点内插方法从TIN中提取方格网高程数据、等高线生成及相应图形处理与成果输出。最终通过实际算例证明了该方法的有效性。  相似文献   

15.
The area around Sataun in the Sirmur district of Himachal Pradesh, India (falling between the rivers Giri and Tons; both tributaries of the Yamuna River) was studied for landslide vulnerability on behalf of the inhabitants. The study was made using extensive remote sensing data (satellite and airborne). It is well supported by field evidence, demographic and infrastructural details and aided by Geographic Information System (GIS) based techniques. Field observations testify that slope, aspect, geology, tectonic planes, drainage, and land use all influence landslides in the region. These parameters were taken into consideration using the statistical approach of landslide hazard zonation. Using the census data of 1991, vulnerability of the populace to the landslide hazard was accessed. As most of the infrastructure in the region is concentrated around population centres, population data alone was used for vulnerability studies.  相似文献   

16.
Although it is well known that coseismic gravity changes take place during an earthquake, previous research has not yielded convincing evidence demonstrating that significant gravity changes occur before large earthquakes. Furthermore, even if we suspect that gravity changes occur before large earthquakes, we have yet to demonstrate how to consistently observe these changes for useful earthquake forecast that would bring benefits to society. We analyzed ground gravity survey data obtained in 1998, 2000, 200...  相似文献   

17.
GNSS系统及其技术的发展研究   总被引:3,自引:1,他引:2  
阐述了国际上卫星导航系统的总体发展,对美、俄、欧、中的四大全球系统,以及相关的区域系统和增强系统进行了简单的介绍,研究分析了GNSS系统及其技术的发展趋势,同时分析了我国Compass全球系统面临的机遇和挑战,并提出了我国未来工作的建议.  相似文献   

18.
“4D”技术及其应用   总被引:13,自引:0,他引:13  
介绍“4D”(即数字地面模型、数字正射影像、数字栅格地图和数字线划地图)系列产品的生产流程、关键技术、及其在耕地保护、防灾减灾救灾和城市规划等方面的应用方法。  相似文献   

19.
Abstract

Virtual Australia is not a well-defined or agreed concept. This discussion paper conceptualises Virtual Australia as a ‘virtual [digital] model containing and representing all non-trivial objects and their contextual environment – from blue sky to bedrock – in real world Australia’. It describes a scenario for Virtual Australia, one or two decades from now, in which the locations and conditions of non-trivial objects and their environment are updated automatically through a combination of remote sensing and wireless communication technologies in support of a ‘Supranet’. It then examines the concept of the ‘Supranet’ – a pervasive information network based largely on wireless technology linking the physical world to a virtual model in real time – and develops and discusses three principal characteristics of the Supranet: the ability to have or collect specific information (know); the ability to process information (think); and the ability to communicate that information. If, in the near future, any or all non-trivial devices are to some extent able to know, think and communicate, the potential for object autonomy will be realised.  相似文献   

20.
自动车辆定位导航系统中传感器的误差分析   总被引:1,自引:0,他引:1  
徐爱功 《测绘工程》1997,6(1):36-39
对国界定位导航系统中几种常见的辅助传感器所产生的误差进行了分析,导出了不同传感器的误差模型。这些误差模型是估计车辆位置的扩展卡尔曼滤波器的基础,同时也为选择适当的传感器提供了理论根据。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号