首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Esla tectonic unit lies along the southern boundary of the Cantabrian–Asturian Arc, a highly curved foreland fold-thrust belt that was deformed during the final amalgamation of the Pangea supercontinent. Previous structural and paleomagnetic analyses of the Cantabrian–Asturian Arc suggest a two-stage tectonic history in which an originally linear belt was bent into its present configuration, creating an orocline. The Esla tectonic unit is a particularly complex region due to the interaction of rotating thrust sheets from the southern limb of the arc and the southward-directed thrusts of the Picos de Europa tectonic domain during late-stage north–south shortening and oroclinal bending. These structural interactions resulted in intense modification of early-phase thin-skinned tectonic structures that were previously affected by a deeper out-of-sequence antiformal stack that passively deformed the early thrust stack. A total of 75 paleomagnetic sites were collected from the Portilla and Santa Lucia formations, two carbonate passive-margin reef platform units from the middle Devonian. Similar to other regions of the Cantabrian–Asturian Arc, Esla Unit samples carry a secondary remanent magnetization that was acquired after initial thrusting and folding of Variscan deformation in the late Carboniferous. Protracted deformation during late-stage oroclinal bending caused reactivation of existing thrust sheets that include the Esla and younger Corniero and Valbuena thrusts. When combined with existing structural data and interpretations, these data indicate that the present-day sinuosity of the Esla Unit is the consequence of both secondary rotation of originally linear features in the western Esla exposures (e.g., frontal thrusts), and secondary modification and tightening of originally curvilinear features in the eastern Esla exposures (e.g., hanging-wall lateral/oblique ramps). Differences in structural style between the Esla and other tectonic units of the arc highlight the complex kinematics of oroclinal bending, which at the orogen-scale buckled an originally linear, north–south (in present-day coordinates) trending Cantabrian–Asturian thrust belt during the final stages of Pangea amalgamation.  相似文献   

2.
The Asturian Arc was produced in the Early Permian by a large E–W dextral strike–slip fault (North Iberian Megashear) which affected the Cantabrian and Palentian zones of the northeastern Iberian Massif. These two zones had previously been juxtaposed by an earlier Kasimovian NW–SE sinistral strike–slip fault (Covadonga Fault). The occurrence of multiple successive vertical fault sets in this area favoured its rotation around a vertical axis (mille-feuille effect). Along with other parallel faults, the Covadonga Fault became the western margin of a proto-Tethys marine basin, which was filled with turbidities and shallow coal-basin successions of Kasimovian and Gzhelian ages. The Covadonga Fault also displaced the West Asturian Leonese Zone to the northwest, dragging along part of the Cantabrian Zone (the Picos de Europa Unit) and emplacing a largely pelitic succession (Palentian Zone) in what would become the Asturian Arc core. The Picos de Europa Unit was later thrust over the Palentian Zone during clockwise rotation. In late Gzhelian time, two large E–W dextral strike–slip faults developed along the North Iberian Margin (North Iberian Megashear) and south of the Pyrenean Axial Zone (South Pyrenean Fault). The block south of the North Iberian Megashear and the South Pyrenean Fault was bent into a concave, E-facing shape prior to the Late Permian until both arms of the formerly NW–SE-trending Palaeozoic orogen became oriented E–W (in present-day coordinates). Arc rotation caused detachment in the upper crust of the Cantabrian Zone, and the basement Covadonga Fault was later resurrected along the original fault line as a clonic fault (the Ventaniella Fault) after the Arc was completed. Various oblique extensional NW–SE lineaments opened along the North Iberian Megashear due to dextral fault activity, during which numerous granitic bodies intruded and were later bent during arc formation. Palaeomagnetic data indicate that remagnetization episodes might be associated with thermal fluid circulation during faulting. Finally, it is concluded that the two types of late Palaeozoic–Early Permian orogenic evolution existed in the northeastern tip of the Iberian Massif: the first was a shear-and-thrust-dominated tectonic episode from the Late Devonian to the late Moscovian (Variscan Orogeny); it was followed by a fault-dominated, rotational tectonic episode from the early Kasimovian to the Middle Permian (Alleghenian Orogeny). The Alleghenian deformation was active throughout a broad E–W-directed shear zone between the North Iberian Megashear and the South Pyrenean Fault, which created the basement of the Pyrenean and Alpine belts. The southern European area may then be considered as having been built by dispersal of blocks previously separated by NW–SE sinistral megashears and faults of early Stephanian (Kasimovian) age, later cut by E–W Early Permian megashears, faults, and associated pull-apart basins.  相似文献   

3.
In the Variscan foreland of SW-Sardinia (Western Mediterranean sea), close to the leading edge of the nappe zone, nappe emplacement caused folding and repetition of stratigraphic successions, km-scale offset of stratigraphic boundaries and an extensive brittle-ductile shear zone. Thrusts assumed a significant role, accommodating a progressive change of shortening direction and forming complicated thrust triangle zones. During thrust emplacement of the nappes, strong penetrative deformation affected rocks beneath the basal thrust of the nappe stack and produced coeval structures with both foreland-directed and hinterland-directed (backthrusting) shear sense. Cross-cutting and overprinting relationships clearly show that the shortening direction changed progressively from N–S to E–W, producing in sequence: (1) E–W trending open folds contemporaneous with early nappe emplacement in the nearby nappe zone; (2) recumbent, quasi-isoclinal folds with axial plane foliation and widespread, “top-towards-the-SW”, penetrative shearing; (3) N–S trending folds with axial plane foliation, contemporaneous with late nappe emplacement; (4) backthrusts and related asymmetrical folds developed during the final stages of shortening, postdating foreland-verging structures. Structures at (3) and (4) occurred during the same tectonic transport “top-towards-the-E” of the nappe zone over the foreland. The several generations of folds, thrusts, and foliations with different orientations developed, result in a complex finite structural architecture, not completely explicable by the theoretical model proposed up to date.  相似文献   

4.
The Siwaliks in the foothills of the Himalayas, containing molasse sediments derived from the rising mountain front, represent a foreland fold-thrust belt which was deformed during the continued northward convergence of the Indian plate following the continent-continent collision. In this contribution we present balanced and restored cross sections along a line from Adampur through Jawalamukhi to Palampur in the foothills of the Punjab and Himachal Himalayas using published surface/subsurface data. The cross section incorporates all the rock units of the Sub-Himalaya Zone as well as that of the northern Lesser Himalaya Zone. The structural geometry of the fold-thrust belt in this section is largely controlled by three buried thrusts within the Sundernagar Formation of the Lesser Himalaya Zone. Two of these buried thrusts splay from the basal detachment and delineate a buried horse. Three thrusts towards foreland, including the Main Frontal Thrust (inferred to be a blind thrust in this sector), splay from these buried thrusts. In the hinterland, an anticlinal fault-bend fold was breached by a sequence of break-back thrusts, one of which is the Main Boundary Thrust. A foreland propagating thrust system is inadequate to explain the evolution of the fold-thrust-belt in this section. We show that a “synchronous thrusting” model in whichin-sequence initiation of thrusts at depth combined with continued motion on all the thrusts leading toout-of-sequence imbrication at the upper structural levels better explains the evolution of the fold-thrust belt in the Jawalamukhi section. The estimated shortening between the two chosen pin lines is about 36% (about 72 km).  相似文献   

5.
This paper aims to discuss the structural evolution of the Iberian Pyrite Belt during the Variscan Orogeny. It provides new structural data, maps and cross sections from the eastern part of the Iberian Pyrite Belt. Regional geology of the South Portuguese Zone and lithostratigraphy of the Iberian Pyrite Belt are first briefly summarised. Three roughly homoaxial deformation phases are distinguished, and are mainly characterised by south-verging multi-order folds, axial planar cleavages and thrusts. Three structural units are distinguished: the La Puebla de Guzmán and Valverde del Camino antiforms are rooted units related to the propagation of southward-directed thrust systems that may branch onto the lower décollement level of the South Portuguese Zone; El Cerro de Andévalo is a structurally higher unit, mainly composed of allochthonous D1 thrust nappes. No evidence of sinistral transpression has been found in the transected cleavage and the strike of S3 with respect to S2. Better evidence of transpression is the moderately to steeply westerly plunging folds that show S-type asymmetry in down-plunge view. Variscan deformation in the Iberian Pyrite Belt is defined as the combination of a dominant southwards shear and a sinistral E-shear caused by oblique continental collision between the South Portuguese plate and the Iberian Massif.  相似文献   

6.
Recent works suggest Proterozoic plate convergence along the southeastern margin of India which led to amalgamation of the high grade Eastern Ghats belt (EGB) and adjoining fold-and-thrust belts to the East Dhrawar craton. Two major thrusts namely the Vellikonda thrust at the western margin of the Nellore Schist belt (NSB) and the Maidukuru thrust at the western margin of the Nallamalai fold belt (NFB) accommodate significant upper crustal shortening, which is indicated by juxtaposition of geological terranes with distinct tectonostratigraphy, varying deformation intensity, structural styles and metamorphic grade. Kinematic analysis of structures and fabric of the fault zone rocks in these intracontinental thrust zones and the hanging wall and footwall rocks suggest spatially heterogeneous partitioning of strain into various combinations of E-W shortening, top-to-west shear on stratum parallel subhorizontal detachments or on easterly dipping thrusts, and a strike slip component. Although relatively less prominent than the other two components of the strain triangle, non-orthogonal slickenfibres associated with flexural slip folds and mylonitic foliation-stretching lineation orientation geometry within the arcuate NSB and NFB indicate left lateral strike slip subparallel to the overall N-S trend. On the whole an inclined transpression is inferred to have controlled the spatially heterogeneous development of thrust related fabric in the terrane between the Eastern Ghats belt south of the Godavari graben and the East Dharwar craton.  相似文献   

7.
In a cross-section through the southern arm of the Cantabrian Zone, several duplexes have been identified below the Esla Nappe, which is the uppermost and main thrust sheet of the area. The folds deforming the Esla Nappe are culmination walls linked to frontal and lateral ramps belonging to the lower thrust sheets. The thrust sequence can be established on the basis of quantitative analysis of displacement transfer and out of sequence thrusting. The primitive footwall ramps of the Esla Nappe Region were often subsequently broken by décollements developed in successively lower stratigraphic levels of these footwalls. The kinematics of the lowest duplex are more complicated than those of typical duplexes described elsewhere: some thrusts transfer only part of their displacement to the roof thrust, while the remaining part is accommodated along the higher thrusts of previously emplaced duplexes, cutting out of sequence one or more floor or roof thrusts. Cumulative displacement of the thrusts in this region is about 90 km, giving a present thickness 3 times that of the original pre-orogenic sequence, together with a translation of at least 60 km, for the synorogenic basin.  相似文献   

8.

From the early Late Permian onwards, the northeastern part of the Sydney Basin, New South Wales, (encompassing the Hunter Coalfield) developed as a foreland basin to the rising New England Orogen lying to the east and northeast. Structurally, Permian rocks in the Hunter Coalfield lie in the frontal part of a foreland fold‐thrust belt that propagated westwards from the adjacent New England Orogen. Thrust faults and folds are common in the inner part of the Sydney Basin. Small‐scale thrusts are restricted to individual stratigraphic units (with a major ‘upper decollement horizon’ occurring in the mechanically weak Mulbring Siltstone), but major thrusts are inferred to sole into a floor thrust at a poorly constrained depth of approximately 3 km. Folds appear to have formed mainly as hangingwall anticlines above these splaying thrust faults. Other folds formed as flat‐topped anticlines developed above ramps in that floor thrust, as intervening synclines ahead of such ramp anticlines, or as decollement folds. These contractional structures were overprinted by extensional faults developed during compressional deformation or afterwards during post‐thrusting relaxation and/or subsequent extension. The southern part of the Hunter Coalfield (and the Newcastle Coalfield to the east) occupies a structural recess in the western margin of the New England Orogen and its offshore continuation, the Currarong Orogen. Rocks in this recess underwent a two‐stage deformation history. West‐northwest‐trending stage one structures such as the southern part of the Hunter Thrust and the Hunter River Transverse Zone (a reactivated syndepositional transfer fault) developed in response to maximum regional compression from the east‐northeast. These were followed by stage two folds and thrusts oriented north‐south and developed from maximum compression oriented east‐west. The Hunter Thrust itself was folded by these later folds, and the Hunter River Transverse Zone underwent strike‐slip reactivation.  相似文献   

9.
The amalgamation of Pangea during the Carboniferous produced a winding mountain belt: the Variscan orogen of West Europe. In the Iberian Peninsula, this tortuous geometry is dominated by two major structures: the Cantabrian Orocline, to the north, and the Central Iberian curve (CIC) to the south. Here, we perform a detailed structural analysis of an area within the core of the CIC. This core was intensively deformed resulting in a corrugated superimposed folding pattern. We have identified three different phases of deformation that can be linked to regional Variscan deformation phases. The main collisional event produced upright to moderately inclined cylindrical folds with an associated axial planar cleavage. These folds were subsequently folded during extensional collapse, in which a second fold system with subhorizontal axes and an intense subhorizontal cleavage formed. Finally, during the formation of the Cantabrian Orocline, a third folding event refolded the two previous fold systems. This later phase formed upright open folds with fold axis trending 100° to 130°, a crenulation cleavage and brittle–ductile transcurrent conjugated shearing. Our results show that the first and last deformation phases are close to coaxial, which does not allow the CIC to be formed as a product of vertical axis rotations, i.e. an orocline. The origin of the curvature in Central Iberia, if a single process, had to be coeval or previous to the first deformation phase.  相似文献   

10.
玉东-玛东构造带位于塔里木盆地,是在中寒武统膏盐层上滑脱的大规模褶皱冲断带,内部发育多种断层相关褶皱。目前对此构造带的研究,多关注了构造带的局部以及断裂变形。本文根据断层相关褶皱理论,利用地震资料,分析了玉东-玛东构造带内构造样式上的差异性,并通过二维构造正演模拟,建立了典型构造样式的运动学模式。认为研究区内玉东、玛东、塘北3个分区,具有不同的构造样式。玉东地区主要发育和铲式逆断层相关的断弯褶皱,玛东、塘北地区则发育断层突破的滑脱褶皱,突破断层在玛东地区为铲式断裂,而在塘北地区为坪-坡-坪式断裂。根据上奥陶统变形特征及其顶面不整合面之上的地层年代,认为玉东-玛东构造带的变形始于晚奥陶世,主要断裂及其相关褶皱形成于晚奥陶世末期。玉东地区在晚奥陶世早期,形成基底-盖层的低幅褶皱,在晚奥陶世末,形成铲式断裂及断弯褶皱;玛东和塘北地区变形发生在上奥陶统沉积之后,经历了滑脱褶皱和断层突破阶段。通过对比分析认为,断层相关褶皱样式的差异,与膏盐层岩性、厚度,上奥陶统岩性、厚度及构造转换作用有关。本研究有助于完善对塔里木盆地早古生代末期构造变形及演化的认识。  相似文献   

11.
库车再生前陆盆地冲断构造楔特征   总被引：60，自引：4，他引：56  
库车再生前陆盆地冲断构造楔由一系列向南运动的逆冲断层和相关褶皱组成。冲断楔的北部以断层转折褶皱、断层传播褶皱、双重逆冲构造为主。断层楔的前缘发育了很好的滑脱膝折背斜,全为盲断层控制,形成隐蔽式前锋。冲断层的就位从中新世开始,自北向南迁移,前锋的构造形成在第四纪。造成逆冲断层的地壳水平缩短作用速度在中新世较慢,平均为0．355mm/a,上新世中期达0．82mm/a,而到上新世晚期和第四纪速度增大了约一个数量级,达到1．29－3mm/a。  相似文献   

12.
In northwest Spain thrust sheets occur in an arcuate fold belt. The fault style consists of an array of thrusts, merging downdip into a single décollement surface. Most of the thrust sheets were initiated as thrusts cutting across flat lying beds. Folds above the hanging-wall ramps and some minor structures indicate that the body of the nappes has been subjected to an inhomogeneous simple shear parallel to bedding (y = 1.15), with slip concentrated along bedding planes. This allows the rocks forming the nappe to remain unstrained. At the base of the nappes a thin zone of deformed rock exists. The thrust sheets die out laterally against an anticline-syncline couple, oblique to the thrust direction. A geometrical analysis shows that if anticline and syncline axes are oblique, the thrust sheet was emplaced with a rotational movement, which can be evaluated. As deformation progressed two sets of folds were formed: a circumferential set, following the arc, and a radial set. An arcuate trace of the thrust structures remains after unfolding the radial folds. With a rotational emplacement, the displacement vector for successive points has a progressively greater length, and forms a progressively lower angle with the thrust. The main thrust units are broken into several slices with rotational movements, so that each unit was curved as it was being emplaced, producing a first tightening of the arc. Later folding increased the arc curvature to its present shape. The palaeomagnetic data available support the above conclusions.  相似文献   

13.
The Variscan nappe stack of SE Sardinia originated as a result of several stages of nappe imbrication during the Lower Carboniferous phases of the Variscan orogeny. The crustal shortening caused regional SSW-and W-directed thrusting, greenschist facies metamorphism and open-to-isoclinal polyphase folding. The final stage of shortening produced large-scale antiforms and synforms.
Post-collisional deformation resulted in inversion of earlier thrusts as normal faults, development of low-angle normal faults, and refolding of earlier foliation and thrust planes by asymmetric folds with subhorizontal axial planes. Facing directions of these latest folds are directed horizontally outward from the hinge zones of main antiforms, suggesting that they cannot be regarded as parasitic folds of the latest thickening phase, but instead are the consequence of vertical shortening during gravitational collapse of dome-like km-scale antiforms, leading to denudation of antiformal culminations.  相似文献   

14.
Active deformation in the South Caspian region demonstrates the enormous variation in kinematics and structural style generated where a rigid basement block lies within a collision zone. Rigid basement to the South Caspian Basin moves with a westward component relative both to stable Eurasia and Iran, and is beginning to subduct at its northern and western margins. This motion is oblique to the approximately north–south Arabia–Eurasia convergence, and causes oblique shortening to the south and northeast of the South Caspian Basin: thrusting in the Alborz and Kopet Dagh is accompanied by range-parallel strike–slip faults, which are respectively left- and right-lateral. There are also arcuate fold and thrust belts in the region, for two principal reasons. Firstly, weaker regions deform and wrap around the rigid block. This occurs at the curved transition zone between the Alborz and Talysh ranges, where thrust traces are concave towards the foreland. Secondly, a curved fold and thrust belt can link a deformation zone created by movement of the basement block to one created by the regional convergence: west-to-east thrusts in the eastern Talysh represent underthrusting of the South Caspian basement, but pass via an arcuate fan of fold trains into SSW-directed thrusts in the eastern Greater Caucasus, which accommodates part of the Arabia–Eurasia convergence. Each part of the South Caspian region contains one or more detachment levels, which vary dependent on the pre-Pliocene geology. Buckle folds in the South Caspian Basin are detached from older rocks on thick mid-Tertiary mudrocks, whereas thrust sheets in the eastern Greater Caucasus detach on Mesozoic horizons. In the future, the South Caspian basement may be largely eliminated by subduction, leading to a situation similar to Archaean greenstone belts of interthrust mafic and sedimentary slices surrounded by the roots of mountain ranges constructed from continental crust.  相似文献   

15.
The present study provides new magnetic and microstructural data for the Eaux-Chaudes granodioritic massif (Western Axial Zone, Pyrenees) and contributes to the understanding of its geometry, internal structure and emplacement mechanism. Moreover, the geological cross-sections and field data allow to reconstruct the evolution of the whole area from Variscan to Alpine times and to integrate the emplacement of the igneous body in the context of the Variscan orogeny. The Eaux-Chaudes pluton (301?±?9?Ma) is mainly composed by granodiorite, describing a normal compositional zoning and an approximately concentric arrangement that is consistent with the zonation of the low-field magnetic susceptibility. Magnetic foliation is subhorizontal in the inner part of the intrusion and becomes parallel to the petrographical contacts along pluton margins, roughly describing the geometry of the intrusion. Magnetic lineations are dominantly subhorizontal, with E–W to ENE–WSW directional maximum. The general parallelism between Variscan structures of the host rock and the geometry and magmatic fabric of the intrusion reveals a late syn-Variscan emplacement. The tectonic regime registered during magma emplacement is in agreement with an N–S shortening and an E–W stretching direction, consistent with the transpressive regime deduced for other Pyrenean intrusions. Alpine overprint produced a slight tilting in the southern part of the intrusion, but it can be considered that the original Variscan structure is basically unchanged.  相似文献   

16.
The Ruhr coal basin is part of the external fold and thrust belt of the Variscan orogen in Central Europe. Information from extensive coal mining, outcrops in the south of the Ruhr district, reflection seismic surveys and about 800 exploration boreholes in the north, support the interpretation of a mostly molasse-type sequence, more than 6000 m thick, of Namurian and Westphalian age. Both the southwest-northeast trending sedimentary basin structures and the fold structures of the Ruhr Carboniferous were caused by the compressive regime of the Variscan folding in its hinterland, but there is no direct relationship between sedimentary basin structures and the later folding structures. Coal formation started in the Namurian C, reached its maximum during the Westphalian A and B and ended during the Westphalian D. In total, about 250 coal seams were formed, but only 50 of them are of economic importance at present.Strata thicknesses and coal content are generally greater in the southeast of the Ruhr coalfield than in the northwest. An important exception can be observed in the lower part of the Westphalian A, where, in contrast, strata thicknesses are greatest in the northwest (in the Münsterland region), although the coal content remains the greatest in the southeast.Detailed isopach maps covering 100–200 m thick stratigraphic intervals reveal the existence of a southwest-northeast trending zone of reduced subsidence in the Ruhr coalfield that moved from southwest-northeast during the Westphalian. This structure can be interpreted as a peripheral bulge. Coal seems are purer and thicker in the area of this structure, which therefore must have been a paleogeographic element within the Ruhr basin.The general effect of a general decrease in the coal content of the Upper Carboniferous towards the northwest is superimposed on the migration of the coal content maxima of individual formations towards the northwest. During the Namurian C and Westphalian A the coal content maxima were situated in the area of the River Ruhr and during the Westphalian B and C in the area of the River Lippe.The deformation of the Ruhr coal basin is of post-Westphalian age, as demonstrated by the concordant folding of the Devonian and Carboniferous strata. The tectonic structure is mainly characterised by the following elements: stockwerk tectonics, axial elevations and a succession of compressional and extensional tectonics.Due to the general dip of the Ruhr coal basin towards the north, different structural levels (“stockwerks”) can be observed. The southern area displays the lowermost stockwerk, with many minor folds of about constant wavelength and low amplitudes. Thrusts are mainly small and some of them show increasing displacement upwards. The central part of the mining area displays the intermediate stockwerk with large, tight anticlinoria with minor folds separated by open synclines. These are accompanied by folded northwest- and southeast-vergent thrusts. In the northern Ruhr district, high anticlines and broad, trough-shaped synclinoria with only few thrusts represent the uppermost stockwerk. Large fold controlled thrusts die out at this level. Axial culminations and depressions have strongly influenced the structural style of the folding as well.According to this model of stockwerk tectonics, excess volume created by disharmonic folding is redistributed by thrusts. Thrusts dying out downwards at different stratigraphic and structural levels give evidence that there is no regional basal detachment below the Ruhr coal basin. This interpretation fits very well to new results achieved by the deep seismic reflection profile DEKORP 2-N. The section clearly shows thick-skinned tectonics in the Rhenish massif, with a shortening of the whole thickness of crust. The Ruhr coal basin can, therefore, be interpreted in terms of an autochthonous foreland basin in front of a buried thrust front to the south.Investigations on the post-Carboniferous strata of the Ruhr basin indicate different periods of active faulting. Cross and diagonal faults were formed partly at the end of the Variscan folding and partly before and during deposition of the Zechstein strata. A further important period of tectonic movements occurred during the early Kimmerian phase in the Late Triassic. Furthermore, earlier extensional faults in the Ruhr basin have been affected by Late Cretaceous transpression.  相似文献   

17.
In southwest Ireland an Upper Devonian to Lower Carboniferous clastic succession was deposited in an ENE–WSW trending half-graben, known as the South Munster Basin. Across the Galley Head peninsula on the south coast, this stratigraphical succession is attenuated due to the presence of a palaeogeographical feature called the Glandore High. Evidence suggests that the Glandore High was an east–west feature, faulted to the north and east, which was part of the southern flank (hangingwall rollover) of the South Munster Basin. During post-Carboniferous Variscan deformation the relatively thin stratigraphy of Galley Head underwent prolonged folding, causing a local periclinal fold pair to develop within the hinge zone of a regional syncline. The main cleavage then developed parallel to bedding on the overturned south limb of the anticline of this fold pair. The local enhanced shortening caused the development of a structural culmination, and south facing, tight to isoclinal folds. The culmination was enhanced and tightened by a fault system of contractional, strike-parallel faults linked by cross faults. Secondary folds occur across the hinges of regional anticlines and also on major fold limbs as isolated fold pairs and in monoclinal fold zones, some of which may have nucleated on irregular sandstone bodies. Local crenulation cleavages are related to late fault movements. Syn-cleavage, conjugate, wrench faults record 10 per cent to 15 per cent strike-parallel extension in the culmination. The deformation chronology of the Galley Head area is somewhat anomalous for the Irish Variscides in that the folds were well established before the onset of the main cleavage development. The enhanced shortening across the area was compartmentalized by major cross faults and a minor component of north–south sinistral shear was also active across the area causing a swing in strike and a late set of minor cross faults. Structural facing directions in southwest Ireland appear to be directly linked with the geometry of the deformed basins. Hence the southward facing along the south coast is due to the proximity of the southern margin of the South Munster Basin. Structural facing directions fan northwards across the basin and major folds are overturned to the north at the northern margin of the basin.  相似文献   

18.
We constructed a geological map, a 3D model and cross-sections, carried out a structural analysis, determined the stress fields and tectonic transport vectors, restored a cross section and performed a subsidence analysis to unravel the kinematic evolution of the NE emerged portion of the Asturian Basin (NW Iberian Peninsula), where Jurassic rocks crop out. The major folds run NW-SE, normal faults exhibit three dominant orientations: NW-SE, NE-SW and E-W, and thrusts display E-W strikes. After Upper Triassic-Lower Jurassic thermal subsidence, Middle Jurassic doming occurred, accompanied by normal faulting, high heat flow and basin uplift, followed by Upper Jurassic high-rate basin subsidence. Another extensional event, possibly during Late Jurassic-Early Cretaceous, caused an increment in the normal faults displacement. A contractional event, probably of Cenozoic age, led to selective and irregularly distributed buttressing and fault reactivation as reverse or strike-slip faults, and folding and/or offset of some previous faults by new generation folds and thrusts. The Middle Jurassic event could be a precursor of the Bay of Biscay and North Atlantic opening that occurred from Late Jurassic to Early Cretaceous, whereas the Cenozoic event would be responsible for the Pyrenean and Cantabrian ranges and the partial closure of the Bay of Biscay.  相似文献   

19.
The northern Pilot Mountains of west-central Nevada, consist of a complexly deformed terrane of imbricate thrust nappes composed of rocks of Permian(?), Triassic through Jurassic, and possible Cretaceous ages. Three episodes of fold and thrust generation are recognized on the basis of folded thrusts and thrusted folds, and deformation and emplacement of the nappes is constrained as having occurred during the late Mesozoic. Folds are apparently coeval with thrust faults, and fold geometry is used in determining approximate directions of thrust displacement. The history of thrust displacement is complex and involves three directions of motion on a regionally extensive detachment surface, the Luning thrust. The first motion, from NW to SE, results in displacements of the order of several tens of kilometres and is the probable result of NW-SE regional compression. The final two episodes of motion are NE-SW followed by E-W; they result in small displacements and are possibly the product of gravity sliding of the thrust sheet into depressions in the autochthon. Sites of downwarp in the autochthon may have been formed either by load induced subsidence or regional compression.  相似文献   

20.
Abstract

The structure of the Pyrenean pre-Hercynian rocks involved in the “Axial Zone” antiformal stack, results from the association of Hercynian cleavage-related folds and Hercynian and Alpine thrusts. Some of these Alpine and Hercynian thrusts separate thrust sheets in which Upper Paleozoic rocks, Devonian and pre-Hercynian Carboniferous, exhibit different lithostratigraphy and internal structure.

In order to know both, the original Devonian facies distribution and the structural characteristics, the effects of the Alpine and the Hercynian thrusts must be considered. If a conceptual restored cross-section is constructed taking into account both the Alpine and Hercynian thrusts, a different Devonian facies distribution is achieved. Devonian carbonatic successions were originally located in a northernmost position, whereas sequences made by alternations of slates and limestones lie in southernmost areas. Moreover, a N-S variation of the Hercynian structural style appears. In the northern units thrusts are synchronous to folding development and they are the most conspicuous structures. In the intermediate units, thrust postdate cleavage-related folds, and in the southernmost units several folding episodes, previous to the thrusts, are well developed.

We present some examples which enable us to discuss the importance of the Hercynian and Alpine thrusts in the reconstruction of the Pyrenean pre-Alpine geology.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号