首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 466 毫秒
1.
青藏高原重力场与壳幔结构分析   总被引:1,自引:0,他引:1  
张健  陈石 《地震》2013,33(4):11-18
本文基于重力资料, 分析了青藏高原壳幔结构模型、 高原陆内形变动力学条件、 高原深部物质运动特征及动力学机制。 研究表明, 重力布格异常和自由空间异常除了分别反映大地水准面之下的“剩余”密度信息和大地水准面之上的“附加”密度信息之外, 还可以组合在一起反映壳幔结构的流变学信息。 在整体处于Airy 重力均衡状态下, 如果局部布格异常与空间异常同向减小, 则是弱地壳强地幔的反映; 如果布格异常减小空间异常增大, 则是强地壳弱地幔的反映。 笔者认为, 青藏高原南部多为强地壳弱地幔地段, 东部既有强地壳弱地幔地段, 也有下地壳柔性-上地幔脆性地段, 北部多为弱地壳强地幔地段。 高原南北两侧板块边界的挤压力对高原做功, 重力位能使高原物质向低位势转移, 产生流变变形, 导致南区和北区主要为挤压变形区, 东区主要为构造伸展-侧向挤出区。 由于壳幔结构的差异, 不同地区驱动变形所需位能大小不同。 相同位能条件下, 南部更易于隆升, 东部更易于流变伸展。  相似文献   

2.
青藏高原隆升及伸展变形中的重力位能   总被引:12,自引:5,他引:12       下载免费PDF全文
青藏高原在南侧印度板块和北侧欧亚板块的双向挤压下整体抬升,边界挤压力所作的功增加了高原内部重力位能.但高位能态的物质会不断向重力势能最小的平衡态转移,并产生流变变形.由于受南北边界的挤压力约束,高原内部的高位能驱使喜马拉雅山和昆仑山之间的地体产生东西向伸展变形.利用三种不同方法对青藏高原重力位能进行计算,结果表明,一定流变学条件下,青藏高原目前所具有的重力位能可以产生各地体中观测到的地表构造变形速率.  相似文献   

3.
为了清晰认识发生于青藏高原西北部2008年与2014年的两次于田MS7.3地震发震构造环境与构造地貌特征,本文利用DEM(数字高程模型)数据分析"喀喇昆仑—西昆仑—康西瓦地区"的地形地貌特征,结合区域活动断裂研究资料、相对于塔里木盆地的两期GPS速度场资料和区域运动学特征等讨论两次MS7.3地震所处的青藏高原西北部区域构造环境和地壳运动学特征,分析喀喇昆仑断裂、阿尔金断裂康西瓦段、龙木错-邦达错断裂及贡嘎错断裂所围限的西昆仑地块的地质构造背景、阿尔金断裂西南端发震断裂活动性及孕震环境等发震构造基本条件;进而利用"地形剖面"方法及断裂分布特征分析震源区的地形地貌特征,给出晚第四纪以来的地貌形态与发震构造的关系,从区域构造地貌学和GPS地壳运动学的角度探讨中上地壳变形特征及孕震过程;最后讨论区域孕震构造、克尔牙张性裂谷演化过程和地球动力学背景等。通过地形剖面及区域地貌综合分析新疆于田2008年MS7.3拉张型发震构造和2014年MS7.3走滑拉张型地震的发震构造特点的区别,认为2014年发生的地震可能与2008年MS7.3地震同震库伦应力变化、触发过程及震后变形过程密切相关,并且青藏高原西北部地区存在明显的东西向拉张性构造单元,可能与青藏高原10~15 Ma以来的地壳减薄过程有关。  相似文献   

4.
利用青藏高原东北缘2011-2015年期间的流动重力观测资料,系统分析了区域重力场变化及其与2016年1月21日青海门源MS6.4地震发生的关系,结合GNSS、水准观测成果和区域地质构造动力环境,进一步研究了区域重力场变化的时空分布特征及其机理.结果表明:(1)测区内重力场异常变化与祁连山断裂带在空间上关系密切,反映沿祁连山断裂带(段)在2011-2015年期间发生了引起地表重力变化效应的构造活动或变形.(2)门源MS6.4地震前,测区内先出现了较大空间范围的区域性重力异常,到临近发震前显示出相对闭锁的现象,且围绕震中区周围出现四象限分布特征的局部重力变化,地震发生在重力反向变化过程中,并出现显著的四象限分布特征的重力异常变化,其中,青海门源与甘肃天祝一带重力差异变化达100×10-8m·s-2以上.(3)区域重力场动态演化大体反映了青藏高原东北缘物质北东流的动态效应,门源震中附近区域地壳受挤压变形显著、面压缩率和重力剧烈变化的特征最为显著.(4)重力场的空间分布及其随时间变化与地壳垂直与水平运动及地质构造活动等观测结果有一定的对应关系,强震易发生在重力变化四象限分布中心地带或正、负异常区过渡的高梯度带上.  相似文献   

5.
唐山地震前后区域重力场变化机制   总被引:14,自引:0,他引:14       下载免费PDF全文
李瑞浩  黄建梁 《地震学报》1997,19(4):399-407
系统地分析了唐山地震前后34期的重力测量数据,讨论了地面沉降、采矿和地下水位变化对重力观测的影响.论证了观测资料的可靠程度,并在此基础上结合地质构造、形变测量和测震结果分析了重力变化的物理机制,讨论了这次强烈地震前后重力变化的全过程,演绎出3个特征阶段重力变化的物理机制:① 1971~1975年期间,震区附近区域重力场具有显著的上升趋势,它与莫霍界面的上隆有关;② 1975~1976年期间,根据形变、地震波的震源机制解正演的唐山点的重力变化表明,这期间的重力变化主要由震前的蠕滑、膨胀和同震位错引起.重力观测表明,蠕滑和膨胀是发生在震前的;③ 1976年8月以后的重力变化呈恢复趋势,地壳的均衡下沉和引张恢复是这一期间重力变化的主要原因.   相似文献   

6.
汶川地震震后短期青藏高原东北缘地壳变形特征成因讨论   总被引:1,自引:0,他引:1  
2007—2009年时段GPS数据资料显示青藏高原东北缘地区地壳运动较前期(1999-2007年时段)发生明显变化.本文分别对汶川地震同震影响、震后粘弹性松弛影响和震后余滑影响进行了分析.结果表明,同震对该区域地壳变形特征的形成存在一定影响,而震后粘弹性松弛和余滑产生的影响均可忽略不计.分析认为,对于中国大陆这种多块体系统而言,现有的震后变形机制并不能充分解释震后短期某些区域地壳运动变形特征的形成,汶川地震震后短期青藏高原东北缘的地壳变形特征的形成可能主要与震后块体运动调整有关.  相似文献   

7.
利用江苏重力测网2014-2017年重力场观测资料,采用绝对重力控制与相对重力联测相结合的平差方法,获取2016年射阳MS 4.4地震前后重力场变化图。根据射阳MS 4.4地震前后射阳地区各测线重力段差变化特点,绘制重力场等值线并进行对比分析,结合相关机理,探讨重力场变化与该地震的内在联系。同震观测数据显示:射阳MS 4.4地震发生在重力异常值高梯度带附近,发震时震中地区位于NS挤压正异常、EW张拉负异常状态,震后区域重力梯度变化量开始减小,是一种典型的重力异常调整现象。  相似文献   

8.
汶川Ms8.0震前区域重力场变化与震质中研究   总被引:2,自引:1,他引:1  
青藏高原东缘地区地震灾害频发,2008年汶川M8.0地震给我国人民带来了巨大的灾难.汶川地震发震构造位于龙门山断裂带上,该断裂带在发震前长期闭锁,在汶川震中附近没有明显的小震活动和地表位移等前兆现象.本文以1998年至2005年的四期流动重力测网资料为基础,应用重力位场方法反演下地壳密度变化,开展深部孕震过程研究,结果...  相似文献   

9.
赵瑞斌  沈军  李军 《地震地质》2001,23(4):493-500
在收集、分析前人资料及野外考察的基础上 ,重点研究了 190 2年阿图什 8 级地震形变特征与区域地震构造环境的关系 ,并结合震中区的地球物理探测成果 ,对该地震的发震模式进行了探讨。认为 ,阿图什大震的发生是塔里木与南天山两大块体相向对冲挤压的结果。较大的震源深度 ,使得震中区变形以较大规模和范围的崩塌、滑坡、地裂缝等重力地质现象为主 ,浅部薄皮活动构造亦发生了同震破裂及褶皱变形  相似文献   

10.
针对2015年4月25日尼泊尔Mw7.8地震的孕震特征,本文首先对覆盖尼泊尔及周边地区的5套GPS水平速度场结果进行了融合,得到了近似统一参考框架下的速度场结果;在此基础上通过对此次地震震源区及周边地区的速度场、应变率场、基线时间序列分析,识别了震前变形特征.GPS应变率场结果显示,喜马拉雅主边界断裂存在大范围挤压应变积累,震源区处于近南北向应变积累高值过渡区.跨喜马拉雅构造带的GPS基线时间序列结果表现为持续缩短现象,表明印度板块与欧亚板块之间的持续挤压变形特征,2012年以来的缩短增强现象反映了印度板块对青藏块体的推挤增强作用明显.距离震中较近的西藏南部GPS同震位移结果以南向运动为主且指向震中,反映了青藏高原存在逆冲应变释放现象.综合此次尼泊尔地震前变形和同震应变释放特征,认为此次地震的孕震区域和同震应变释放区域均较大,将会对青藏高原的地壳变形与强震孕育产生深远影响.  相似文献   

11.
This paper uses plate tectonics and satellite-derived gravity data to further discussion of crustal deformation under the Tibetan Plateau. The first of our three contributions is a spherical harmonic analysis of the global plate boundary system. A distribution of 470 Dirac delta functions is applied to describe the generating forces according to the rates of crustal creation and destruction on the plate boundaries. Analysis of the extensional and compressional forces in the spreading and subducting zones shows that the present global plate motion causes compressional stresses in the N-S direction under the Tibetan Plateau. The second contribution is the calculation of the crustal stresses in Tibet as inferred from satellite gravity data. By applying solutions to the problem of the spherical shells, the satellite-determined stresses indicate that the up-welling mantle material under Tibet induce N-S and E-W extension. Finally, a superimposed stress system is constructed. This stress system shows that the present crustal deformation in Tibet does not produce N-S shortening but generates E-W extension.The results of this paper have provided geodynamical explanations for geological field observations in Tibet and fault plane solutions of earthquakes in the Tibetan side of the India-Eurasia collision. The stress patterns reveal that the cold downwelling mantle convection flow beneath southern Tibet pulls the Indian plate down but applies a bending moment on the end of the plate to uplift and support the mass of the Himalayas.  相似文献   

12.
As the most basic geophysical field, the earth gravity field has achieved wide attention, and its spatial anomaly characteristics and dynamic variation can provide important scientific basis for studying the internal structure and dynamics of the Earth. Based on the mobile gravity observation data of the southeastern Tibetan plateau from 2013 to 2016, the dynamic variation tendency and anomaly characteristics of the regional gravity field in different temporal resolutions are obtained before and after the Ludian and Jinggu earthquakes in the study area respectively. The method of wavelet multi-scale decomposition is used to analyze the relationships of gravity field variation with the earth movement, material density change, and strong earthquake preparation. The deep material variation, dynamic process and the mechanism of earthquake inoculation in the southeastern Tibetan plateau are further discussed. Results indicate that the gravity field variation in the source region before the Ludian and Jinggu earthquake respectively is characterized by obvious positive and negative anomalous transition zone and gradient zone that are consistent with the direction of fault tectonics, suggesting the strong crustal movement and mass migration during the earthquake incubation period. The result of wavelet multi-scale decomposition of the gravity field during the period from September 2013 to April 2014 shows that the gravity field variation at different depth and space scale in the crust and upper mantle of the southeastern Tibetan plateau is significantly correlated with seismic distribution and the location of active fault zone. This indicates that the earthquake inoculation in the study area is closely related to the fault movement and the distribution of material density in the crust and upper mantle, which may be affected by the complex deep dynamic process of the material migration in the crust and mantle. The characteristic that strong earthquakes always occur near positive and negative anomaly transition zones and gradient zones of gravity field change is preliminarily explained, based on the dynamic process of material migration in the crust and upper mantle of the southeastern Tibetan plateau. The research results of this paper have some reference value to the study on the earth movement and seismogenic mechanism.  相似文献   

13.
The active convergence between the northwest corner of the Philippine Sea Plate and the southeast margin of the Eurasian Plate has given rise to the Taiwan mountain-building and produced numerous earthquakes. Among the earthquakes, the 1999 Chi-Chi earthquake is the largest one recorded in the century. In this study, we examine the crustal gravitational potential energy (GPE) change in the Taiwan orogen caused by the Chi-Chi earthquake sequence, which was catalogued by the regional broadband seismometer array for a whole year. As a result, we find that the crust was going up and down randomly during the earthquake sequence, but an overall cumulative gain of the crustal GPE, +1.82×1016 J, was rapidly achieved in 1 month after the main shock. The crustal GPE was nearly still afterwards and reached +1.90×1016 J in 1 year. Spatially, although the main surface faulting has occurred in western Taiwan, the crustal GPE gain is mainly distributed in central Taiwan at the area where the existing crustal GPE is high and the existing lithospheric GPE is relatively low. The crustal GPE loss by the Chi-Chi earthquake sequence can also be observed and is generally distributed at both sides of the crustal GPE gain area. The crustal GPE gain mainly found in central Taiwan corroborates that the uplift of the Taiwan orogen is principally taking place in central Taiwan, rather than in the more hazardous western Taiwan.  相似文献   

14.
Information about topography, the shape of the geoid, seismicity, Neogene deformation and volcanism in the region of Altiplano-Puna of western South America is used to analyse the state of stress across the convergent plate margin in terms of the effects of topography and simple models of its compensation. An average elevation near 4 km is consistent with compensation by a yet unresolved combination of crustal root and hot uppermost mantle producing a geoid high of 22–27 meters, average horizontal compressive stress (in excess of a reference sea level lithostatic value) of 390 bars in a 150 km thick lithosphere, and an average shear stress of 170 bars along a 30° dipping interplate boundary. The basis for these estimates is evidence for a neutral to extensional stress regime within the high plateau contrasted with a compressional regime on the eastern slopes and along the interplate boundary itself. Comparison with other plateaus in a convergent plate tectonic setting suggests an evolutionary sequence from compressional to extensional tectonics as elevation of the plateau increases.  相似文献   

15.
Analysis of stress state of faults is helpful to understand crustal mechanical properties and seismicity. In the paper, we invert the horizontal crustal stress field in the southeastern Tibetan plateau using focal mechanism solutions of small and medium-size earthquakes, and apply them to estimate the stability of regional major faults. Firstly, we collect focal mechanism solutions of small and medium-sized earthquakes in the southeastern Tibetan plateau. The dataset includes more than 1 000 focal mechanism solutions in the past twenty years. Magnitudes of these earthquakes vary from M3.0 to M6.0. Most of the focal mechanism solutions were determined using waveform inversion technique. Although most of focal mechanism solutions in the southeastern Tibetan plateau are strike-slip faulting, their spatial pattern is different in sub-regions. Normal faulting earthquakes mainly occurred in the western Sichuan region, reverse faulting earthquakes mainly occurred in the boundary zone between the Tibetan plateau and the South China craton, and strike-slip faulting earthquakes mainly occurred in the central and southern Yunnan region. Next, we settle on a mesh with grid spacing of 0.5° in longitude and latitude in the region and invert the horizontal crustal stress field at each grid point. Spatial variation of the maximum principal stress axis in the southeastern Tibetan plateau shows a clockwise rotation around the eastern Himalaya syntax. The azimuth of maximum compressional stress axis is about 88.1° in the western Sichuan region, about 124.6° in the South China craton, and about 21.6° in the western and southern Yunnan region. The azimuth of regional maximum compressional stress is nearly parallel to the direction of terrain elevation gradient, and that of the minimum compressional stress is nearly parallel to the tangential direction of the topographic elevation contours. The spatial pattern reflects the control role of gravity spreading of the Tibetan plateau on the regional horizontal stress field. Finally, we analyzed regional fault stability based on these collected focal mechanism solutions. The fault instability parameter (I) is defined based on the Mohr-Coulomb criterion and indicates the degree of fault approximating to rupture. The instability parameters on fourteen major faults in the southeastern Tibetan plateau were calculated. Our results show that the stability of the Lianfeng-Zhaotong Fault is the lowest before 2014 in the region, which indicates the fault zone is close to rupture at that time. Our results provide a new useful tool to assess regional seismic potential using dense focal mechanism solutions.  相似文献   

16.
This paper presents a study of the tectonic stresses in central Asia based on an interpretation of satellite gravity data for mantle convection and supplemented with published fault plane solutions of earthquakes. Northwest-southeast to north-south compressional stresses exist in the Tien Shan region where reverse faulting dominates. The maximum compressive stress is oriented approximately northeast-southwest in the regions of Altai and southern Mongolia. Farther north, compressive stress gives way to tensional stress which causes normal faulting in the Baikal rift system. It is also shown that all of the tectonic stresses in the Tibetan plateau and Himalayan frontal thrust are related to the convection-generated stress patterns inferred from satellite gravity data. These results suggest that the complex crustal deformation in central Asia can be convincingly described by the deformation of the lithosphere on top of the up- and down-welling asthenospheric material beneath it. This observational fact may not only upset the simple view of the fluid crustal model of the Tibetan plateau, but also provide some useful constraints for the future development of deformation theory of continental crust.  相似文献   

17.
刘同振  高原 《中国地震》2023,39(2):225-242
青藏高原东北缘是青藏块体与华北块体的接触前缘部位,是研究青藏高原隆升扩张和深部动力学问题的重要区域。本文收集了青藏高原东北缘及其邻区由不同方法和不同资料获得的地壳地震各向异性结果,介绍了中上地壳和全地壳各向异性特征;结合区域地质构造、地表运动、构造应力和深部结构,分析了研究区域地壳各向异性的区域分布特征及其与地质构造的关系。结果表明,青藏高原东北缘地震各向异性存在明显的横向区域差异性,体现区域深部构造和地壳介质变形的复杂性;上地壳与全地壳的垂向差异性,反映出该区域可能存在各向异性分层现象。由于青藏高原隆升在其东北缘的伸展边界、物质运移及深部动力模式等尚处在探讨之中,结合多种数据并综合多种方法分析,有助于获得精细、准确的地震各向异性信息,为研究青藏高原隆升演化机制和深部动力模式提供有效的约束。  相似文献   

18.
The eastern Tibetan plateau has been getting more and more attention because it combines active faults, uplifting, and large earthquakes together in a high-population region. Based on the previous researches, the most of Cenozoic tectonic activities were related to the regional structure of the local blocks within the crustal scale. Thus, a better understanding of the crustal structure of the regional tectonic blocks is an important topic for further study. In this paper, we combined the simple Bouguer gravity anomaly with the Moho depths from previous studies to investigate the crustal structure in this area. To highlight the crustal structures, the gravity anomaly caused by the Moho relief has been reduced by forward modeling calculations. A total horizontal derivative (THD) had been applied on the gravity residuals. The results indicated that the crustal gravity residual is compatible with the topography and the geological settings of the regional blocks, including the Sichuan basin, the Chuxiong basin, the Xiaojiang fault, and the Jinhe fault, as well as the Longmenshan fault zone. The THD emphasized the west margin of Yangtze block, i.e., the Longriba fault zone and the Xiaojiang fault cut through the Yangtze block. The checkboard pattern of the gravity residual in the Songpan-Garze fold belt and Chuandian fragment shows that the crust is undergoing a southward and SE-directed extrusion, which is coincident with the flowing direction indicated from the GPS measurements. By integrating the interpretations, the stepwise extensional mechanism of the eastern Tibetan plateau is supported by the southeastward crustal deformation, and the extrusion of Chuandian fragment is achieved by Xianshuihe fault.  相似文献   

19.
沈旭章 《地球物理学报》2013,56(6):1895-1903
地壳和岩石圈变形特征研究对于深入了解中强地震的深部孕震环境具有重要科学意义.本文联合P和S波远震接收函数偏移成像结果,对发生过芦山7.0地震和汶川8.0地震的龙门山断裂带及附近区域地壳和岩石圈结构进行分析.结果揭示出在青藏高原向四川盆地过渡的龙门山断裂带,Moho面和岩石圈底界面(LAB)呈现出强烈变形,特别是芦山地震和汶川地震震源区下方地壳出现了错断、下凹,岩石圈也呈现下凹变形特征.这种地壳及岩石圈变形所代表的高应力的积累可能是汶川和芦山地震发生的重要深部地球动力学背景.  相似文献   

20.
海原一六盘山构造带是青藏高原东北缘地区的一条重要边界,在海原断裂带和六盘山断裂带接触区形成了特殊的马东山挤压阶区,本文对跨过该挤压阶区一条密集测点大地电磁剖面数据进行了处理和二维反演,获得的深部电性结构图像揭示在马东山挤压阶区深部电性结构表现为在高阻背景下镶嵌多个向西南倾斜的低阻条带电阻率结构样式,并在深度约25 km汇聚到中下地壳低阻层内,共同组成"正花状"结构;海原一六盘山构造带西南侧到陇中盆地区间呈现高、低阻相互"楔合"的深部结构特征,而其东北侧的鄂尔多斯西缘带自地表到中下地壳为较完整的高阻块体.另外结合跨过海原断裂带中段和西秦岭造山带的大地电磁探测结果,对海原一六盘山构造带分段性及其两侧的陇中盆地和鄂尔多斯地块的接触关系进行了研究分析.大地电磁探测成果佐证了在海原断裂带中段为具有走滑特点的断裂,而其尾端与六盘山断裂带斜交区域的马东山地区发生了强烈的逆冲推覆与褶皱变形;活动构造研究发现沿海原断裂带所产生的左旋走滑位移被其尾端的马东山、六盘山以东西向的地壳缩短调节吸收,GPS观测表明青藏高原东北缘地区现今构造变形分布在海原一六盘山构造带以西上百公里的范围内,陇中盆地一海原一六盘山构造带和鄂尔多斯地块一线的深部电性结构图像也很好地解释了该区变形状态:海原一六盘山构造带带及西南盘的陇中盆地的中下地壳非常破碎,在青藏高原向北东方向的推挤下容易发生变形,而北东盘鄂尔多斯地块地壳结构完整,很难发生构造变形.对海原一六盘山构造带马东山阶区和龙门山构造带的深部电性结构及变形特征等进行了比较分析,发现该区有与2008年汶川地震相似的深部构造背景,应重视该区强震孕育环境的探测研究.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号