首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
SD卡是在多媒体领域被应用很广的外部存储介质.文中介绍了如何使用单片机的SPI接口对SD卡进行控制和数据的读写.鉴于PIC单片机的诸多优点,在设计中使用PIC单片机作为核心部件可以使得电路设计更简洁,数据采集系统的性能较好.  相似文献   

2.
SD卡在海洋数据存储中的应用   总被引:4,自引:0,他引:4       下载免费PDF全文
设计了一种新型海洋要素数据采集系统的SD卡存储方案.该方案选用与8051完全兼容的高性能单片机C8051F340作为主控制器,采用SPI总线与SD卡通信.介绍了SD卡以及C8051F340芯片中SPI接口的结构和工作原理,讨论了相关的设置、硬件连接和软件设计,实现了时SD卡的读写,解决了海洋数据采集过程中,数据存储量大、存储设备不易与PC机接口的问题.  相似文献   

3.
介绍了一种嵌入式存储系统的设计与实现方法。主要包括硬件设计和软件设计 2 部分:硬件设计部分以内核微处理器 STM32H743 为核心,完成了 SD 存储卡接口、调试串口、时钟模块等硬件电路设计以及 PCB 抗干扰设计;软件设计部分主要是利用 MDK 软件进行相关开发,通过移植 FatFS 文件系统,完成了在 SD 卡中创建并快速读写文件的程序设计。最后,通过 2 组试验对系统的基本功能、读写速度以及可靠性进行了测试,测试结果充分验证了整个系统的正确性。  相似文献   

4.
介绍一种水质监测仪器中,单片机与触摸屏之间应用Modbus协议进行串行通信的方法,简要介绍了Modbus协议,并给出了程序工作流程图.实际应用表明,该方案能够实现触摸屏与单片机之间稳定、可靠的连接.  相似文献   

5.
在航标灯应用研究中,为解决ATmega8L单片机在工作电压上升过程中,系统频率不稳定的问题,提出一种基于单片机电源管理技术(PWM)的校频方法.针对航标灯工作环境光照度变化缓慢的特点,提出过渡时间TINT的概念.利用AVR单片机PMT的空闲模式,结合看门狗唤醒功能,在不改动电路的前提下,实现了单片机系统时钟自动校频的功...  相似文献   

6.
一种新型便携式旋桨流速仪   总被引:1,自引:0,他引:1  
介绍了一种新型BH-1型便携式旋桨流速仪,主要由自主研制的流速传感器、手持式主机及微机数据回放处理软件三部分组成.其传感器采用独特的导流筒和导流罩结构设计,增加了系统的抗干扰能力,有效提高了测量准确性.应用单片机技术实现了数据的实时检测与处理,多路存储以及瞬时测量流量功能.通过静态试验标定,表明该流速仪测量范围(0.04~4)m/s,非线性误差为0.874%.该流速仪结构新颖、使用轻巧方便、稳定可靠,已广泛应用于国家海洋局对陆源入海排污口排污监测和海洋环境管理工作中.  相似文献   

7.
将具有体积小、低功耗、运行速度快等特点的C8051F单片机,应用于海洋现场监测的化学传感器数据处理中,为现场测量传感器要求的高可靠性、低功耗提供技术保证.简要介绍了C8051F单片机的性能特点,以及如何应用于负二价硫传感器数据处理.  相似文献   

8.
针对国内现有的基于单片机或PC/104的数据采集系统的不足,介绍了一种基于ARM(Advanced RISCMachines)平台和单片机平台的数据采集系统。它结合了国外先进的数据采集技术,具有功耗低、体积小、性能高,软、硬件扩充灵活的特点,其通用性、模块化和可扩展性能满足浮标、船用气象仪等海洋水文气象仪器设备研发的需求。  相似文献   

9.
本文主要介绍了HY-1200型双频测深的功能及其先进的终端技术。该系统采用了大量当今半导体和计算机领域的最新成果,技术含量高,在单片机控制技术应用中具有一定的代表性。系统一年多的无故障运行证明了其可靠性和实用性。  相似文献   

10.
介绍一种基于LabVIEW虚拟仪器技术的数据采集与处理系统。该系统以单片机和计算机为硬件平台,采用高精度16位Σ-ΔA/D转换器AD7705对采集到的信号进行A/D转换,通过串口进行数据通信,实现了叶绿素浓度的计算机自动采集、实时数据显示、分析和数据管理等功能。该实现方案还可用于温度、盐度等参数的高精度自动数据采集系统,在海洋环境监测中具有推广应用的现实前景。  相似文献   

11.
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.  相似文献   

12.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

13.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

14.
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

15.
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.  相似文献   

16.
17.
Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.  相似文献   

18.
19.
A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria ( 〉 99% ), but also between polar marine bacteria and bacteria from other aquatic environments ( ≥ 98.8% ), including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.  相似文献   

20.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号