首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 296 毫秒
1.
对青海东昆仑东山根矿区所采集的7个磷灰石样品进行分析,所获得的磷灰石裂变径迹年龄分布在136~67 Ma,具体分为136~112 Ma、101~95 Ma和74~67 Ma 3个年龄组,这较好地体现了该地区所经历的构造隆升事件。东山根矿区热历史可分为4个阶段：第1阶段(160~80 Ma),是羌塘地块与拉萨地块发生向欧亚板块挤压拼贴作用的响应阶段;第2阶段(120~80 Ma),经历了阿尔金断裂走滑,青藏高原北部隆升,以及燕山晚期冈底斯地体向北俯冲运动,直到早白垩世晚期发生快速冷却抬升;第3阶段(80~23 Ma),构造事件相对平稳,整体呈轻微抬升,样品随地质体隆升缓慢降温;第4阶段(23 Ma至今),快速冷却抬升,对应印度板块对欧亚板块的碰撞作用。  相似文献   

2.
通过对东昆仑西段野马泉地区所获得的5个磷灰石样品的裂变径迹分析, 探讨该地区构造演化特征.磷灰石裂变径迹年龄分为153.8 Ma、106.8~81.0 Ma、48.7~44.4 Ma 3个年龄组, 其中153.8 Ma记录了班公湖-怒江洋闭合事件; 106.8~81.0 Ma是拉萨地块与羌塘地块碰撞拼合事件对东昆仑地区的远程效应; 48.7~44.4 Ma是印度-欧亚大陆碰撞之后伸展事件的体现.野马泉地区热历史分为3个阶段:第1阶段(130~110 Ma)持续隆升, 对应班公湖-怒江洋闭合后拉萨地块与羌塘地块拼合事件; 第2阶段(110~14 Ma)持续隆升, 90 Ma之前隆升速度较快, 与阿尔金断裂走滑及西大滩断裂韧性变形有关, 90 Ma之后进入一个时间较长的平稳抬升期; 第3阶段(14 Ma至今)受青藏高原新近纪以来强烈构造活动的影响, 快速隆升.3个阶段的隆升速率和隆升量分别0.021 mm/a和0.42 km、0.01 mm/a和1.0 km、0.1 mm/a和1.43 km, 平均隆升速率为0.028 mm/a, 总隆升量为2.86 km.   相似文献   

3.
取自柴达木盆地北缘宗务隆构造带的5个变质岩样品、80颗锆石SHRIMP U-Pb测年结果表明:80颗岩浆成因锆石年龄分布在510~420Ma之间;5个测试样品的206Pb/238U平均年龄分别为437.8±2.7Ma(样品Qb-217)、440±3Ma(样品Qb-218)、433.2±3.6Ma(样品Qb-219)、497.1±3.5Ma(样品Qb-225)、464.1±4.2Ma(样品Qb-228),这5组206Pb/238U平均年龄均代表了锆石结晶年龄,即岩浆侵位年龄。加里东期锆石的大量存在说明宗务隆构造带早古生代存在与板块离散—聚合有关的岩浆活动,是介于中—南祁连地块与欧龙布鲁克地块之间的板块边界。宗务隆构造带是一条经历了漫长地质演化过程和多期造山运动的多旋回复合造山带,构造雏形形成的起始时限不晚于497.1±3.5Ma,构造格局奠定于海西—早印支期。这是对宗务隆带研究的突破,在该区域地质演化中具有重要意义。  相似文献   

4.
藏北纳木错西缘前寒武纪辉长岩变质变形年代学研究   总被引：3，自引：0，他引：3  
前寒武纪辉长岩出露于纳木错西缘逆冲推覆构造带中。辉长岩经历了早期角闪岩相变质和韧性推覆、晚期绿片岩相变质和脆性推覆。早期变形的斜长角闪质糜棱岩中变质矿物角闪石、斜长石和石榴石的 Rb-Sr等时线年龄为173±10Ma;角闪石~(40)Ar-~(39)Ar坪年龄和等时线年龄均显示174Ma的变质和变形年龄。受晚期构造-热事件的影响,斜长石的~(40)Ar-~(39)Ar坪年龄和等时线年龄分别为109Ma和110 Ma。综合上述结果,可以确定前寒武纪辉长岩早期角闪岩相变质作用的年龄是173～174 Ma,可能与羌塘地块和拉萨地块初始碰撞引起的深层次的韧性剪切变形有关;晚期绿片岩相变质作用年龄是109～110 Ma,指示了碰撞造山晚期的冲断构造变形时代。两期变质变形年龄的确定对研究羌塘地块与拉萨地块碰撞过程具有重要的意义。  相似文献   

5.
位于中央造山带西段的东昆仑造山带因多期次造山和复杂演化历史而备受关注,约束其中生代隆升剥露历史,对于理解青藏高原大规模隆升在东昆仑地区的扩展及影响颇具意义。东昆仑造山带内中生代侏罗系-白垩系地层缺失严重,体现中生代以来强烈的隆升剥露过程,也是该区热演化的研究难点。本文通过对东昆仑造山带样品的磷灰石、锆石裂变径迹分析和热演化史研究,并结合东昆仑及周缘地区现有低温热年代学研究,识别出东昆仑造山带所经历的五次隆升冷却事件,即201~193Ma（早侏罗世）、172~152Ma（中-晚侏罗世）、120~98Ma（早白垩世末-早白垩世初）、98~20Ma（晚白垩世-中新世）及20~0Ma（中新世至今）。所获5个年龄组响应东昆仑地区所经历的构造热事件,其中201~193Ma年龄组响应南部羌塘地块与昆仑地块的碰撞事件;172~152Ma年龄组为中-晚侏罗世古特提斯洋闭合后,造山后伸展的构造事件的记录;120~98Ma热事件吻合拉萨地块和羌塘地块碰撞事件;98~20Ma年龄组为东昆仑地区长期缓慢剥蚀去顶过程的印证;20~0Ma的快速隆升剥露事件则为东昆仑周缘断裂系活化相伴,多期隆升剥蚀事件均得到地层不整合及沉积记录等研究成果的证实。区内剥蚀起始时间从由南到北逐渐变老,体现东昆仑地区隆升剥蚀的不均一性。  相似文献   

6.
欧亚与印度大陆的碰撞使得印度大陆的北东角强烈挤入欧亚大陆内部,形成东构造结,其引发的强烈变形将南羌塘地块、北羌塘地块、拉萨地块、保山地块、兰坪-思茅地块以及地块之间的缝合带挤压于很窄的范围内,造成青藏高原腹地与其东南缘之间构造单元划分、对比困难。滇西福贡地区位于青藏高原东南缘,东构造结影响范围内,是三江造山带及青藏高原相关地块的汇聚处。福贡地区石炭系岩石组合表明其形成于较为稳定的浅海相沉积环境中,具有被动大陆边缘沉积特征。三件石炭系二云母石英片岩碎屑锆石表面年龄数据(194个有效分析点)形成五个主要年龄区间:2550~2400Ma、1800~1550Ma、1200~1080Ma、1000~850Ma和600~480Ma,峰值分别为~2502Ma、~1724Ma、~1120Ma、~886Ma和~512Ma。对比其他地块同时代地层的碎屑锆石年龄谱表明,福贡地区石炭系可能是拉萨地块的一部分,与腾冲地块一样,属于其南延部分。结合中新生代岩浆岩带的构造连续性,我们认为,印度板块东北角向北、北东方向的强烈挤压导致拉萨地块及冈底斯岩浆岩带弯曲、缩颈、并发生分离与旋转。  相似文献   

7.
西藏羌塘盆地白垩纪中期构造事件的磷灰石裂变径迹证据   总被引：4，自引：1，他引：3  
王立成  魏玉帅 《岩石学报》2013,29(3):1039-1047
拉萨与羌塘地块于白垩纪中期的碰撞造山对羌塘原型盆地的热体制和构造演化有着重要影响.运用磷灰石裂变径迹方法,对羌塘盆地隆鄂尼夏里组和托纳木雪山组砂岩分析表明,裂变径迹年龄集中在120～ 80Ma之间,表明在白垩纪中期,羌塘盆地普遍发生了一次构造抬升事件,该期构造事件的年龄与盆地内早白垩世的岩浆热事件、主要构造变形作用发生在晚白垩世以及雪山组和阿布山组角度不整合的时代(125～75Ma)较一致,是拉萨与羌塘地块碰撞造山事件的记录.热历史模拟表明,白垩纪中期构造事件对羌塘盆地南部和北部的热演化历史有着差异影响,羌塘盆地南部降温速率相对不大,抬升剥蚀厚度约1500m,而北部古地温迅速降温到近地表温度,抬升剥蚀厚度近4000m.这种差异抬升剥蚀可能与班公湖-怒江洋壳向南俯冲使得因拉萨地块构造负载而导致羌塘地块的挠曲有关.  相似文献   

8.
南天山南缘前陆褶皱冲断带在独库公路范围内出露于铁力买提达坂一带,其构造岩片主体向南逆掩于塔里木盆地之上,构造样式以双向逆冲为特征。相关韧性剪切带中白云母矿物~(40)Ar/~(39)Ar同位素测年获坪年龄368±1Ma和等时线年龄368±6Ma。结合区域构造分析,这条作为南天山中央地块南部构造边界的大型复合式构造带,主要形成发育时限为晚泥盆世-早石炭世,并在二叠纪重新活动。前者可能是是南天山洋盆向北俯冲于伊犁地块之下的构造变形过程的痕迹,后者则可能是由伊犁-塔里木复合地体与北天山地块在晚石炭世-早二叠世发生碰撞而导致的构造变形。  相似文献   

9.
对临沧地体泥盆纪—石炭纪南段组的沉积岩开展碎屑锆石LA-ICP-MS U-Pb定年研究结果表明,所有样品的U-Pb年龄谱存在3个主要峰值:泛非期(530~680Ma)、晚格林威尔期(900~980Ma)和早格林威尔期(1100~1300Ma)。次要峰值年龄为1550~1730Ma和2350~2630Ma,反映了物源区构造-岩浆事件的复杂性。南段组碎屑岩锆石年龄图谱明显区别于思茅地块泥盆纪—石炭纪碎屑锆石年龄图谱,临沧地块南段组碎屑锆石的年龄表明其物源来自东冈瓦纳超大陆,临沧地体应该是来自东冈瓦纳北缘的微地块,这也与其生物特征相吻合。  相似文献   

10.
野外地质和室内岩相学、岩石地球化学特征研究表明,东昆仑造山带存在大量后造山期花岗岩.在此基础上,对其重要地段的典型样品进行了40Ar/39Ar同位素年龄测定,分别得到142.14±1.98 Ma,207.35±0.86 Ma和223.6±1.3 Ma三个坪年龄.结果表明,本地区印支末期已经进入后造山作用阶段,该阶段延续时间可能较长,一直延续到燕山期--典型的陆内碰撞时期.本文从岩石地球化学和同位素年代学角度对本区酸性岩浆活动的构造环境和时限进行了制约.  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

13.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

20.
岩石密度和超高压岩石折返速率   总被引：1，自引：3，他引：1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号