共查询到20条相似文献，搜索用时 328 毫秒
1.
对中国大陆地壳水平变形的初步探索 总被引：13，自引：0，他引：13
根据全国ＧＰＳ网１９９４和１９９６年两期观测资料的处理结果,讨论了中国大陆地区现阶段应变场和应力场。青藏亚板块的西部和东部张应变起主导作用,中部压应变占优势,主压应变方向为北北东向;青藏亚板块东南部东南段云南地区的主压应变方向为北西向,压应变和张应变量级相当。新疆亚板块的主压应役北北东向至北东向为主,应变量存在差别。华北亚板块的主压应变方向是北东至近东西向为主导,局部地段存在差别,大部分地区压应变 相似文献
2.
8.1级震后青藏块体东北部水平形变态势与地震有序活动研究 总被引：2，自引：0，他引：2
青藏块体东北部2003年最新GPS复测揭示：昆仑山口西8．1级地震后本区水平运动变形较前变异显,以甘青块体西部出现的与NE向挤压背景相反的张性运动变形为主要标志,且区域总体应变幅度增大。结合地震有序活动分析认为：本区目前的水平运动变形态势,与8．1级大震及随后青藏块体中西部发育的NE向中强以上地震条带在较短时间内释放了大量的压应变,使得青藏块体北部区域NE向推挤的应力场失衡(西侧的区域应力场强度衰减、东侧的应力场增强)密切相关;因而青藏块体北部大区域应力场趋于平衡过程将有利于块体东北边缘应力应变加速积累和破裂错动。 相似文献
3.
根据近十年来区域台网的P波初动方向观测资料,得到了鄂尔多斯地块周围13个分区的综合地震节面解;结合已有的结果进行分析,地块周围确实存在有别于华北地区地壳应力场基本情况的小区域应力场:地块西南边缘的六盘山褶皱带处于北东东向的水平挤压应力状态;地块边缘的断陷盆地处于北西向的水平拉张应力状态,尤其是渭河盆地到临汾盆地的主压应力轴已近于直立;地块西北角和东北角处于北西向的水平拉张与北东向的水平挤压共同作用的应力状态;在地块的西面与北面,从北到南和由西往东,主压应力轴的走向由北北东向逐渐转变为近东西向。 此外,还对本文结果在板内动力学中的意义进行了简要的讨论。 相似文献
4.
On the basis of the GPS data obtained from repeated measurements carried out in 2004 and 2007,the horizontal principal strain of the Chinese mainland is calculated,which shows that the direction of principal compressive strain axis of each subplate is basically consistent with the P-axis of focal mechanism solution and the principal compressive stress axis acquired by geological method.It indicates that the crustal tectonic stress field is relatively stable in regions in a long time.The principal compressive stress axes of Qinghai-Tibet and Xinjiang subplates in the western part of Chinese mainland direct to NS and NNE-SSW,which are controlled by the force from the col-lision of the Eurasia Plate and India Plate.The principal compressive strain axes of Heilongjiang and North China subplates in the eastern part direct to ENE-WSW,which shows that they are subject to the force from the collision and underthrust of the Eurasia Plate to the North America and Pacific plates.At the same time,they are also af-fected by the lateral force from Qinghai-Tibet and Xinjiang subplates.The principal compressive strain axis of South China plate is WNW-ESE,which reflects that it is affected by the force from the collision of Philippine Sea Plate and Eurasia Plate and it is also subject to the lateral force from Qinghai-Tibet subplate.It is apparent from the comparison between the principal compressive strain axes in the periods of 2004～2007 and 2001～2004 that the acting directions of principal compressive stress of subplates in both periods are basically consistent.However,there is certain difference between their directional concentrations of principal compressive stress axes.The sur-face strain rates of different tectonic units in both periods indicate that the events predominating by compressive variation decrease,while the events predominating by tensile change increase. 相似文献
5.
Zhou Cuiying 《中国地震研究》2005,19(4):442-457
INTRODUCTIONThere exist many methods for studying recent crustal stress field.One of the most commonmethodsis to use focal mechanismsolution data of earthquakes to deduce the recent crustal stressfield.The method is simple and feasible and the data obtained is reliable.Yan Jiaquan,et al.(1979)usedthe method to study the recent tectonic stress field in China and its adjacent areas andgave a rough configuration and regional characteristics of the stress field.Li Qinzu(1980),WeiGuangxing,e… 相似文献
6.
本文收集了1976—2018年发生在中国大陆及其周边地区(15°~55°N, 65°~125°E)的4303个地震震源机制解, 分析了该区震源机制解和P、 T轴空间分布特征, 并使用这些震源机制解, 反演得到了中国大陆及周边地区二维构造应力场分布。 应力场反演结果表明, 云南大部、 青藏高原大部以及华北华南大部以走滑型应力性质为主, 印度洋板块与欧亚板块的强烈碰撞控制着中国西部地区, 大量的逆断型地震集中分布在青藏高原周缘和西域活动地块的天山地区。 青藏高原内部也存在正断型地震, 且应力场方向在26°N发生了很大的变化。 位于青藏高原东构造线以南的滇缅活动块体, 最大主压应力σ1方向在大致100°E发生突变, 由以西的NNE方向偏转到NNW方向。 中国东部的东北块体到华北块体再到华南块体, 最大主压应力方向有一个从NE向逐渐转变成EW向再变化到NW向的旋转趋势。 应力场总体结果表明, 中国东部应力场主要受到太平洋板块和菲律宾板块对欧亚大陆俯冲的作用, 中国西部主要受印度板块向北碰撞欧亚大陆的影响, 块体内部相互作用、 块体与断裂带相互作用也对应力场变化产生影响。 相似文献
7.
自Global CMT和前人文献中搜索了1973～2015年间的34条中小地震震源机制解并进行分析,根据震级对每个地震震源机制解进行加权处理,采用网格搜索法反演了川滇菱形块体中部区域现今构造应力场。结果表明,川滇菱形块体中部区域整体以走滑断层类型为主,而西部呈现正断层类型;整个区域应力场受到近NW向挤压,NE向拉张,应力形因子为0.1。该区域应力场主张应力轴方向近水平,表明有横向的拉张作用。较低的应力形因子表明几乎处于NW-SE向和垂直向的双轴挤压及NE-SW向拉张的应力状态。这种应力状态来源于2种动力作用:(1)在青藏高原物质东流和华南块体阻挡作用下呈现NW-SE向挤压和NE-SW向拉张的走滑应力状态;(2)印度板块缅甸弧对该地区深部的NEE向低角度俯冲作用导致浅部地壳物质具有NEE-SWW向的拉张分量。这2种动力的共同作用导致该地区既出现走滑型地震,又出现正断型地震。 相似文献
8.
2008年3月21日新疆于田发生MS7.3级地震,2014年2月12日于田再次发生MS7.3级地震,两次地震相距约110 km.但是,前者震源机制为正断层,后者震源机制为左旋走滑断层.为进一步探讨这两次地震的孕育应力环境、发震机制及其动力学成因,本文进行三维有限元数值试验分析,计算了该区域在GPS约束条件下的速度场、应力和应变场变化,并与实际观测资料进行对比.数值计算得到的区域内几条主要大的走滑断层错动性质,与实际地质观察到的断层左旋或右旋性质吻合,验证了计算结果的可靠性.结果表明于田及其临近区域整体上处于北东-南西向挤压和北西-南东向拉张状态.在GPS速度约束条件下,2008年于田地震震中区域最大主张应变率大于最大主压应变率,处于以拉张为主的应力状态,NE走向断层受到北东-南西方向的拉应力作用,从而形成正断层;2014年于田地震处于拉张应变率与压应变率几乎一致的区域,NEE走向断层在NE-SW主压应力和NW-SE主张应力作用下发生左旋走滑. 相似文献
9.
东亚大陆大地震的活动带走向、活动方式、震源主压应力方向、总迁移方向,沿纬度的分布和发震频度随时间的变化,均与地球自转速率变化有成因联系。本文从地球自转加速、减速、匀速的变化趋势进行这方面的观测资料分析,证明地球速率变化是东亚大陆地震的基本动力来源 相似文献
10.
ZHU ShouBiao & SHI YaoLin Institute of Crustal Dynamics China Earthquake Administration Beijing China Department of Geophysics Peking University Beijing China Laboratory of Computational Geodynamics Graduate University of Chinese Academy of Sciences Beijing China 《中国科学D辑(英文版)》2007,50(1):67-74
Based on data of principal stress orientation from focal mechanism and of geological features in China, we made pseudo-3D genetic algorithm finite element (GA-FEM) inversion to investigate the main forces acting on the Chinese continent and adjacent areas which form the Chinese tectonic stress field. The results confirm that plate boundary forces play the dominant role in forming the stress field in China, as noticed by many previous researchers. However, we also find that topographic spreading forces, as well as basal drag forces of the lower crust to the upper crust, make significant contribution to stresses in regional scale. Forces acting on the Chinese continent can be outlined as follows: the collision of the India plate to the NNE is the most important action, whereby forces oriented to the NW by the Philippine plate and forces oriented to the SWW by the Pacific plate are also important. Topographic spreading forces are not negligible at high topographic gradient zones, these forces are perpendicular to edges of the Tibetan Plateau and a topographic gradient belt running in the NNE direction across Eastern China. Basal drag forces applied by the ductile flow of the lower crust to the base of upper crust affect the regional stress field in the Tibetan Plateau remarkably, producing the clockwise rotation around the eastern Himalaya syntax. 相似文献
11.
The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau. 相似文献
12.
13.
中国大陆地壳的应变应力场研究 总被引：5，自引：0，他引：5
根据全国ＧＰＳ网１９９４年和１９９６年两期测量结果,研究了中国大陆地壳现阶段的水平形变应力场。结果显示,西部青藏块体与新疆块体主压应力场为近南北至北 北东向,而南北地震带以东、长江以及北地区为北东东至近东西向,华南块体上为北 北西至北西向,与滑线场理论模型基本吻合。反映出中国大陆地壳变形的压应力主要来自印度板块与欧亚板块的俯冲碰撞。而太平洋板块与菲律宾板块对欧亚板块的作用力以及地幔向上的作用力总体 相似文献
14.
15.
基于2015年尼泊尔地震序列的破裂模型及均匀弹性半空间模型,计算了该地震序列传递到中国西藏境内发生在定日县地震和聂拉木县地震的应力.2015年尼泊尔地震序列导致定日县地震和聂拉木地震节面和滑动方向的库仑应力增加(2~3)×103 Pa和(2.4~3.1)×105 Pa,表明这两个地震受到尼泊尔地震序列的触发.其次,我们计算了2015年尼泊尔地震序列在中国大陆及其附近主要活动断层上产生的库仑应力变化.喜马拉雅主山前逆冲断裂和青藏高原内部的拉张正断层上的库仑应力有较大的增加,而青藏高原的走滑断裂,如阿尔金断裂、东昆仑断裂、玉树玛曲断裂、班公错断裂西部、嘉黎断裂的库仑应力有较大的降低.天山南北两侧的断裂库仑应力降低.而华北及东北、华南地区的库仑应力变化几乎可以忽略不计.最后,计算了该地震序列造成的水平应力变化.水平面应力在2015年尼泊尔地震序列北向(青藏高原大部和新疆区域)增加(拉张),而在地震序列东侧的西藏南部和川滇地区南部降低(压缩),在华北和东北仅有少许增加,在华南地区有少许降低.在中国西部,主压应力表现为以2015年地震序列为圆心的向外辐射状,而主张应力方向与同心圆切线方向大体一致.水平主压应力方向在东北地区为北东向,在华北地区为北东东向,在华南地区为南东东向.这种模式与现今构造应力场方向相似,表现了2015尼泊尔地震序列所代表的印度板块和欧亚板块的碰撞是中国大陆构造变形的主要动力来源. 相似文献
16.
Yanxing Li Guohua Yang Zhi Li Liangqian Guo Cheng Huang Wenyao Zhu Yang Fu Qi Wang Zaisen Jiang Min Wang 《中国科学D辑(英文版)》2003,46(2):82-117
The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90°E is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2 ± 1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1 ± 0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8 ± 1.3 mm/a in the central part of Altun fault and 9.8 ± 2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau. 相似文献
17.
藏东应力场分析 总被引：1，自引：0，他引：1
利用GPS观测结果、震源机制解及地应力测试分析藏东地区的应力场特征。根据GPS资料得到了藏东地区的地壳应变状态,而拉萨地块内部,最大主压应变的方位为NE41．21°,羌塘地块内部的最大主压应变方位为NEl9．88°。而在川滇和羌塘地块交界的三江地区,GPS计算得到的最大主压应变方位为SE47．76°;在滇缅地块区内部,最大主压应变方位为NE46．13°根据震源机制解资料得到了藏东地壳应力状态,拉萨地块最大主压应力方位为NE78．33。,羌塘地块最大主压应力方位为NE36．24°三江地区最大主压应力方位为NE81．54°滇缅地块最大主压应力方位为NE47．000。由钻孔地应力测试得到的藏东拉萨地块主应力方位在NE65～75。之间。 相似文献
18.
Present-day horizontal deformation status of continental China and its driving mechanism 总被引：2，自引：0，他引：2
CHEN XiaoBin Institute of Geology China Earthquake Administration Beijing China 《中国科学D辑(英文版)》2007,50(11):1663-1673
Based on velocity data of 933 GPS sites and using the methods of Ordinary Kriging interpolation and shape function derivation, this study has obtained the strain rate field of continental China in the spherical coordinates. In comparison with previous research results, it is found that such a strain rate field can be described by both the continuous deformation and block motions in the continent. The Tibetan Plateau and Tianshan region are characterized by continuous deformation which is distributed across the whole area. Within the blocks of South China, Tarim, Ordos, and Northeast China, little crustal deformation and deformation occurs primarily on the faults along their boundaries, which can be explained by the model of block motion. In other regions, such as the Yinshan-Yanshan block, North China block, and East Shandong-Yellow Sea, deformation patterns can be explained by both models. Besides, from southwest to northeast of continental China, there are three remarkable extensional zones of NW trending. These results imply that the NNE directed push of the India plate is the primary driving force accounting for the internal deformation of continental China. It produces the uplift, hori-zontal shortening and vertical thickening of the Tibetan Plateau as well as radiation-like material extru-sion. Of these extruded materials, one part accommodates the eastward "escape" of other blocks, generating convergence and compression of western China and widespread extension and local com-plicated deformation in eastern China under the joint action of the surrounding settings. The other part opens a corridor between the South China block and Tibetan Plateau, flowing toward southeast to the Myanmar range arc and filling the gap there which is produced by back-arc extension due to plate subduction. 相似文献
19.
Ｐｏｓｓｉｂｌｅｄｙｎａｍｉｃｓｏｆｎｏｒｍａｌ－ｆａｕｌｔｅａｒｔｈｑｕａｋｅｓｉｎｔｈｅｕｐｐｅｒｃｒｕｓｔｏｆｔｈｅｓｏｕｔｈｐａｒｔｏｆｔｈｅＱｉｎｇｈａｉ－ＸｉｚａｎｇＰｌａｔｅａｕ张东宁，许忠淮Ｄｏｎｇ－ＮｉｎｇＺＨＡＮＧａｎｄＺｈｏｎｇ... 相似文献
20.
本文通过近年来,在京津唐地区取得的大地测量资料,研究本区现代构造运动,指出了北北东—北东向、北西向及东西向三组构造最为活动。它们是受近于水平方向北北西—南南东向主张应力和北东东—南西西向主压应力的应力场所控制,并以主张应力大于主压应力的作用方式出现;而又受深部构造的断块上拱和断陷的影响 相似文献