共查询到20条相似文献，搜索用时 56 毫秒
1.
鸡笼山夕卡岩金(铜)矿床分带及流体演化 总被引：1，自引：0，他引：1
鸡笼山金铜矿床产于燕山期钙碱性花岗闪长斑岩与下三叠统大冶组灰岩接触带。夕卡岩分带从内向外依次为花岗闪长斑岩→蚀变花岗闪长斑岩→透辉石-石榴石夕卡岩→石榴石夕卡岩→硅灰石或石榴石-硅灰石夕卡岩一大理岩。矿化分带序列为Cu(M。)→Cu(Au)→Au(Cu)→Au-Pb-Zn。与早期夕卡岩阶段有关的流体包麦体表现为高温高盐度。温度范围400~680℃ ,平均456℃ 。大约有18%所测石榴石中的流体包裹体含石盐子晶,盐度为20.6%~51%NaCl,平均43.2%NaCl。石英、方解石中的包裹体代表成矿期的流体,温度范围126~386℃ ,平均286℃,盐度为8.7%~21.2%,平均15%。成矿深度为2 km,静水压力20 MPa。 相似文献
2.
内蒙古克什克腾旗长岭子铅锌矿床是大兴安岭南段新发现的一个矿床,矿体赋存于下二叠统大石寨组海相火山岩建造中,矿体受夕卡岩控制。根据手标本中脉体穿插关系和岩石薄片中观察的矿物共生组合特征,文中将长岭子铅锌矿的成矿过程划分为4个阶段：干夕卡岩阶段、湿夕卡岩磁铁矿阶段、石英硫化物阶段和石英碳酸盐阶段,分别以石榴子石±透辉石±硅灰石、石英+绿帘石+电气石+磁铁矿、石英+黄铁矿±磁黄铁矿±黄铜矿±方铅矿±闪锌矿和石英±方解石的矿物组合为标志。长岭子矿床主要发育水溶液包裹体(W型)和含子矿物多相包裹体(S型),前者可进一步划分为富液相(WL型)和富气相(WV型)两个亚类。干夕卡岩阶段辉石中主要发育S型和WL型包裹体,湿夕卡岩磁铁矿阶段绿帘石和石英中主要发育WL型、WV型和S型包裹体,石英硫化物阶段石英中可见所有类型的包裹体,石英碳酸盐阶段的石英±方解石脉中仅见WL型包裹体。干夕卡岩阶段辉石中流体包裹体的均一温度和盐度分别为387~524 ℃和10.7%~52%(NaCleqv.);湿夕卡岩磁铁矿阶段包裹体均一温度为312~533 ℃,盐度为11.3%~60%(NaCleqv.);石英硫化物阶段包裹体均一温度介于182~329 ℃,盐度介于4.7%~38%(NaCleqv.);石英碳酸盐阶段包裹体均一温度为124~199 ℃,盐度介于3.1%~22.4%(NaCleqv.)。上述矿床地质和成矿流体特征表明长岭子铅锌矿为夕卡岩型矿床。成矿流体经历了自夕卡岩阶段高温、高盐度岩浆热液向石英碳酸盐阶段低温、低盐度大气降水热液的转变。石英硫化物阶段发育沸腾包裹体组合,表明成矿流体发生了沸腾作用,这可能是成矿物质沉淀的主要机制。 相似文献
3.
云南羊拉铜矿床位于金沙江构造带中部,是中-晚三叠世金沙江洋盆向西俯冲闭合碰撞造山过程中形成的一个大型铜矿床。矿体多呈层状、似层状顺层产出,但明显受层间破碎带和滑脱带控制。从流体包裹体研究入手,讨论了该矿床成矿流体的特征、演化以及流体不混溶(沸腾)作用与成矿的关系。流体包裹体研究表明,干夕卡岩阶段(Ⅰ)、湿夕卡岩磁铁矿阶段(Ⅱ)、石英硫化物阶段(Ⅲ)以及方解石硫化物阶段(Ⅳ)中发育多种类型的包裹体,主要为气液水两相包裹体和含子矿物多相包裹体,纯液相水包裹体次之,少见纯气相有机质包裹体。其中,含子矿物多相包裹体发育于Ⅰ阶段石榴石、Ⅱ阶段绿帘石,尤其是Ⅲ阶段石英中。Ⅰ、Ⅱ阶段成矿流体具有高温、高盐度特征,均一温度分别为413~593 ℃和336~498 ℃,盐度分别为19.1%~49.7% NaCleq和15.7%~53.3% NaCleq;Ⅲ阶段成矿流体均一温度为148~398 ℃,并具有低盐度(2.1%~9.6% NaCleq)与高盐度(35.5%~65.3% NaCleq)共存的特征;Ⅳ阶段成矿流体具有低温(132~179 ℃)、低盐度(3.4%~10.4% NaCleq)特征。根据流体包裹体的微观特征并结合矿区的宏观地质特征,认为流体不混溶(沸腾)是导致本矿区金属沉淀成矿的主要机制。 相似文献
4.
辽宁肖家营子矽卡岩型钼(铁)矿床高盐度流体特征及演化 总被引：2，自引：1，他引：1
肖家营子矿床是一个与中-基性侵入岩有关的矽卡岩型钼（铁）矿床,矿体主要赋存于矽卡岩体中。流体包裹体研究表明,辉钼矿化阶段以含子矿物包裹体和气液两相包裹体为主,含子矿物包裹体通过子矿物最终消失而均一,均一温度为203-440℃,盐度（NaCleq）为32．0％～52．0％,气液两相包裹体通过气泡消失而均一,均一温度为146～340℃,盐度（NaCleq）为4．3％-18．4％;石榴石矽卡岩阶段和磁铁矿化阶段主要为含子矿物包裹体,含子矿物包裹体通过气泡消失而均一,包裹体均一温度分别为505～560℃和435-541％,盐度（NaCleq）分别为43．4％-50．0％和44．9％～56．9％。流体包裹体特征和氢氧同位素分析表明,肖家营子矿床含矿流体由含一定金属成矿元素的高温、高盐度的岩浆热液和低温、低盐度的地层水或大气水组成。成矿早期为含一定金属成矿元素的高温、高盐度流体,这类流体是在降压、降温的过程中由岩浆热液演化而成;辉钼矿阶段流体为中温、高盐度流体和中．低温、低盐度的混合流体。含矿流体在演化的过程中,高温、高盐度流体由于压力和密度的转化对磁铁矿沉淀富集具有重要影响;中温、高盐度与低盐度流体的混合有利于辉钼矿富集成矿。 相似文献
5.
西藏冈底斯铜矿带甲马夕卡岩型铜多金属矿床与驱龙斑岩型铜矿流体包裹体特征对比研究 总被引：5，自引：1，他引：5
对甲马铜多金属矿床流体包裹体研究表明与成矿有关的流体包裹体主要有富液相、富气相和含子矿物多相包裹体三类,包裹体的均一温度范围变化大,从240℃到＞500℃.矿床形成早期干夕卡岩阶段,矿物形成温度大于500℃,湿夕卡岩阶段均一温度区间集中在270℃～360℃之间,该时期为硫化物矿物形成的主要沉淀阶段.矿床的矿物组合、包裹体类型及包裹体激光拉曼探针分析表明成矿流体以高盐度、富含Na、K、Ca、Si、Cl-、SO42-、CO32-等成分为特点,流体来源以岩浆作用为主.甲马矿床属与岩浆作用有关的典型夕卡岩型多金属矿床.根据甲马矿床与附近驱龙斑岩铜矿流体包裹体和同位素特征对比分析,提出二者应属于同一成矿系列. 相似文献
6.
新疆富蕴县蒙库铁矿地质地球化学特征 总被引：6，自引：3，他引：6
蒙库是新疆境内目前发现的最大的磁铁矿矿床,矿体赋存在下泥盆统康布铁堡组角闪变粒岩、斜长角闪岩(原岩为火山岩)中.探明铁储量1.1亿吨,全铁平均品位44%.矽卡岩广泛发育并与矿体关系密切,矽卡岩阶段主要发育钙铁榴石、透辉石等矿物,晚期矽卡岩阶段则以大量阳起石、绿泥石、透辉石并伴随磁铁矿的出现为特征.矽卡岩阶段石榴石中原生包裹体类型复杂,均一温度为348℃～500℃,盐度为9.6～12.85wt%;晚期矽卡岩阶段透辉石中富液包裹体的均一温度为241℃～490℃,盐度为10.73～12.9wt%;含子晶的石英包裹体均一温度为348℃～458℃,盐度为38.2～57.1wt%,石英气液包裹体的均一温度在166℃～382℃之间,盐度为9.6～13.04wt%,平均11.31wt%;方解石中富液包裹体的均一温度为145℃～265℃,盐度1.23%～9.6%,流体表现为矽卡岩化过程的中高温中等盐度到中温中等盐度流体再到低温低盐度的演化历程.δ34S的值显示硫的来源于均一的硫的储库,有少量地层硫加入.碳、氢、氧同位素组分表明交代火山岩的流体主要为岩浆晚期的热水溶液,在演化的晚期有大气降水的加入. 相似文献
7.
箭猪坡矿床是广西丹池成矿带南段五圩矿田中最大的Pb-Zn-Sb多金属矿床。矿床主要由早阶段特富大脉状闪锌矿-脆硫锑铅矿矿化和晚阶段脆硫锑铅矿-闪锌矿-碳酸盐-石英脉状矿化组成。本文分析了箭猪坡矿床两种不同矿化类型石英、闪锌矿中的流体包裹体特征、均一温度及盐度,探讨特富矿体形成的控制因素。两种矿化类型包裹体主要由含CO_2包裹体和水溶液包裹体组成。早阶段特富大脉状矿化流体包裹体均一温度为120~290℃,集中在220~290℃之间,盐度为3.6%~13.6%。晚阶段脉状矿化流体包裹体均一温度为150~350℃,集中在240~310℃之间,盐度为1.4%~12.0%。富CO_2成矿流体主要来自变质、有机质中低温热降解、有机质还原、岩浆出溶及夕卡岩化。箭猪坡矿化产于泥盆系破碎带中,晚于华南地区变质作用;矿床成矿温度(220~310℃)远大于有机物热降解释放大量CO_2的温度(约150℃);矿床深部发育Sn矿化,表明成矿流体具还原性,不太可能含有大量而区内非夕卡岩化岩浆热液矿床成矿热液只含有少量CO_2。因此,初步认为箭猪坡矿床富CO_2流体主要与深部夕卡岩化作用有关,成矿流体主要来源于岩浆热液。成矿流体含少量甲烷、沥青质等有机质,表明成矿过程有盆地卤水混入。早阶段特富矿体成矿流体在温度–盐度图上显示中高温中高盐度和低温低盐度流体混合特征,而晚阶段脉状矿化成矿流体温度–盐度分布较为分散,暗示晚阶段脉状矿化成矿过程主要经历了冷却降温,流体混合较弱。这表明成矿流体大规模混合是形成特富矿体的关键控制因素。依据富CO_2流体可能主要来源于深部夕卡岩化作用,初步推测五圩矿田深部有寻找夕卡岩型矿床良好前景。 相似文献
8.
云南省文山县官房钨矿床矿床地质和流体包裹体研究 总被引：1，自引：1，他引：0
云南省文山县官房钨矿床是华南西部右江成矿带新近发现的大型钨矿床之一,产于滇东南褶皱带文山-富宁褶皱束薄竹山穹窿南翼。该矿床的形成与薄竹山S类花岗岩有关,形成于燕山期陆内碰撞体制。矿体产于燕山期花岗岩与寒武系碎屑岩-碳酸盐建造的外接触带,矿石构造主要是浸染状和网脉状。围岩蚀变类型复杂、蚀变分带明显,自花岗岩体向外依次为金云母-绿帘石化带→透辉石-透闪石化带→镁橄榄石化带。成矿过程包括矽卡岩阶段(早阶段)、石英-硫化物阶段(中阶段)和石英-碳酸盐(晚阶段)阶段。早阶段矽卡岩矿物(透辉石、石榴石)中发育含CH4的水溶液包裹体和含子矿物包裹体,中阶段石英中发育含CO2、CH4、N2的水溶液包裹体和含子矿物包裹体,晚阶段石英中发育含CO2的水溶液包裹体。各阶段矿物中不发育含石盐子晶包裹体。早阶段流体包裹体均一温度集中于379～550℃,盐度为3.17%～9.86%NaCleqv;中阶段包裹体均一温度集中于250～370℃,盐度为8.95%～10.61%NaCleqv;晚阶段流体包裹体均一温度为115～221℃,盐度为1.74%～5.71%NaCleqv。估算的早、中阶段流体捕获压力分别为45～90MPa和10～30MPa,推测最大成矿深度为3km。上述流体包裹体研究表明成矿流体由早阶段高温、低NaCl的H2O-CH4-NaCl岩浆热液,演化为中阶段中温、低NaCl的H2O-CH4-CO2-NaCl热液体系,最终转化为晚阶段低温、含CO2的大气降水。 相似文献
9.
河南省栾川南泥湖斑岩型钼钨矿床流体包裹体研究 总被引：20，自引：11，他引：9
河南省栾川县南泥湖超大型钼钨矿床形成于秦岭造山带的燕山期大陆碰撞体制,流体成矿过程包括早、中、晚3个阶段,分别以石英+钾长石±辉钼矿±黄铁矿、石英+多金属硫化物±碳酸盐和石英+碳酸盐+萤石组合为标志,矿石矿物主要沉淀于中阶段.早、中阶段石英中可见纯CO_2包裹体、CO_2-H_2O型包裹体、水溶液包裹体和含子晶多相包裹体,但晚阶段萤石中只发育水溶液包裹体.早阶段流体包裹体均一温度集中于350～460℃,盐度为5.68 wt%～17.87 wt% NaCl.eqv.中阶段包裹体均一温度集中在250～380℃,盐度为3.00 wt%～38.16 wt% NaCl.eqv;中阶段多相包裹体中常见石盐、黄铜矿和未知种类的子矿物,指示流体具有沸腾所致的还原性、过饱和特征;盐度相差悬殊的含子晶多相包裹体、富气相水溶液包裹体和富液相水溶液包裹体共存,在相近温度下异相均一,表明流体沸腾的存在.晚阶段流体包裹体均一温度集中在115～265℃,盐度介于0.53 wt%～1.23 wt%NaCl.eqv之间.估算早、中阶段流体捕获压力分别为70～300MPa和30～150MPa,推测成矿深度约为3km.总之,成矿流体具高温、高盐度、高氧逸度、富CO_2的特征;流体沸腾导致CO_2逃逸,氧化性降低,成矿物质沉淀. 相似文献
10.
地堡那木岗铜(金)矿床位于西藏多龙矿集区,探明储量达大型规模;矿床的成矿过程分为岩浆作用阶段、钾长石-硫化物阶段、石英-多金属硫化物阶段、碳酸盐-黄铁矿阶段和氧化作用阶段,其中石英-多金属硫化物阶段和碳酸盐-黄铁矿阶段为主要成矿阶段;为查明成矿流体特征,确定矿床成因类型,对取自深部矿石中的碳酸盐脉(均为碳酸盐-黄铁矿成矿阶段含黄铁矿黄铜矿石英脉)开展流体包裹体的岩相学观察和显微测温分析。分析结果表明,上述矿物中主要发育富液相、富气相和含子矿物三相包裹体。其中,富液相包裹体的均一温度与盐度分别为:t=80~600℃、w(NaCl,eq)=4.48%~18.79%;富气相包裹体的均一温度和盐度分别为:t=240~560℃、w(NaCl,eq)=5.09%~9.73%;含子矿物三相包裹体的均一温度与盐度分别为:t=240~560℃、w(NaCl,eq)=36%~72%。综合分析认为,地堡那木岗铜(金)矿床成矿流体发生了强烈的沸腾作用,流体沸腾作用是该矿床的重要成矿机制。通过与国内外典型斑岩型矿床与高硫化型浅成低温热液矿床的流体包裹体特征进行对比,其与斑岩型矿床的中高温、高盐度流体特征相似。因此,推测地堡那木岗矿床的成因类型为斑岩型铜(金)矿床。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
18.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
19.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献