共查询到19条相似文献，搜索用时 187 毫秒
1.
2.
《中国海洋大学学报(自然科学版)》2017,(12)
调谐液体阻尼器(TLD)是有效的结构减振装置。TLD在激励作用下内部液体运动属于晃荡问题。本文建立了求解二维不可压缩Navier-Stokes方程的数值模型。数值模型采用对时间积分的分步方法求解压力项,THINC格式捕捉自由面。利用晃荡试验数据验证了模型计算结果的正确性。模拟了不同深度的浅水TLD在不同频率激励作用下内部液体的运动,计算了TLD晃荡产生的阻尼力。分析激励频率对TLD中液体运动的形态和阻尼力的影响。浅水TLD中液体运动形态主要为行波。TLD产生的阻尼力受激励频率影响,在固有频率附近产生共振现象,阻尼力大,减振效果理想。 相似文献
3.
MPS方法数值模拟液舱晃荡问题 总被引：1，自引：0，他引：1
基于无网格粒子法MPS方法(moving particle semi-implicit method)研究了液舱晃荡问题。针对二维矩形液舱晃荡问题进行了数值验证,结果表明MPS方法能够很好地计算晃荡产生的拍击压力。同时将MPS方法应用到带隔板的液舱晃荡问题计算中,分析了二维和三维带隔板液舱晃荡问题。计算结果表明:隔板的存在很大程度地限制了流体的水平运动,隔板附近出现了自由面的翻卷、破碎和融合现象,MPS方法能够很好地模拟这些流动现象。计算得到的波高与实验测得的波高吻合较好,表明MPS方法模拟带隔板的晃荡问题具有一定的可靠性。 相似文献
4.
5.
6.
液舱晃荡是船舶与海洋工程领域的热点问题,有效地抑制液舱晃荡、减小壁面冲击载荷关系着船体结构的安全。使用内嵌隔板是抑制舱内晃荡,减小壁面冲击载荷的有效手段。实际工程中,内嵌隔板的最优设计的前提是对隔板抑制晃荡的机理有深入了解。CIP法具有高精度、低耗散等特点,以THINC格式捕捉自由液面,可以再现液面破碎、翻卷、涡旋以及液滴飞溅等现象。基于此法,建立了数值液舱,对比了单一隔板和组合隔板抑制晃荡的效果。结果表明,内嵌隔板的安装在水平位置上应尽量靠近舱底中线,在垂直位置上应尽量靠近自由液面,且液面附近安装的双垂直隔板抑制晃荡能力最佳。 相似文献
7.
基于黏性流理论,采用动网格技术和6自由度模型,以及动量源方法,建立了双浮板液舱晃荡的数值模型。分别采用3种不同空间步长的网格离散计算区域,进行了网格收敛性验证。通过光滑液舱晃荡的模型试验和解析得到的爬高最大值,验证了数值模型的精确性。在载液率为50%,激励幅值为2 mm条件下,对双浮板液舱晃荡进行了数值计算,与光滑液舱相比,双浮板液舱晃荡的最大爬高明显减小。通过一个激励周期内双浮板液舱晃荡的波面显示发现,液舱晃荡模式由光滑液舱的驻波模式变为U管模式,晃荡模式的改变起到了明显地抑制液舱晃荡的效果。 相似文献
8.
通过物理模型实验,对弹性侧壁液舱和刚性液舱内液体晃荡问题进行了研究。由于流固耦合的影响,弹性侧壁液舱内液体晃荡的最低阶固有频率稍小于同尺寸的刚性液舱内液体晃荡的最低阶固有频率。液舱模型处于纵向简谐激励作用下,其中激励频率在最低阶固有频率附近。实验分析两种相对液深比h/L=0.167和h/L=0.333,在二阶模态的次共振和一阶模态的共振状况下,对弹性侧壁液舱与刚性液舱内不同测点的波面、振幅谱和晃动波高进行对比分析。结果表明:在浅液深(h/L=0.167)一阶共振下,流固耦合对波面形态的影响比较明显,弹性侧壁液舱内测点晃动波高明显大于刚性液舱内对应测点波高;而在一般液深(h/L=0.333)一阶共振下,水弹性效应减弱,弹性侧壁液舱与刚性液舱内对应测点处波高差异较小。 相似文献
9.
随着薄膜型LNG运输船的需求量不断增加,晃荡载荷已成为船舶安全性研究的重要内容之一。本文结合中国船级社规范所推荐的公式,对薄膜型LNG船晃荡水平的载荷进行研究,提出载荷计算方法和流程,在MSC.patran的基础上结合二次开发语言PCL,设计了一套晃荡载荷计算与校核系统。该系统对有限元模型进行前后处理,设计了舱室识别算法来搜索晃荡载荷的作用域,实现薄膜型LNG船晃荡载荷的自动计算与施加,完成屈服强度评估。通过算例测试证明本系统自动计算结果的有效性和准确性,可以为工程设计人员大大节约工作量,大幅度提高工作效率。 相似文献
10.
独立B型LNG液舱内部设置舱壁板材及多种桁材,有效缓解了液舱晃荡效应。针对晃荡载荷下的独立B型LNG液舱结构多目标优化,利用规范中的公式计算晃荡载荷,并引入液舱晃荡系数,以期综合反映液舱内部构件对晃荡特性的影响,在此基础上进一步建立以液舱结构重量和液舱晃荡系数为目标的多目标优化模型,采用多目标遗传算法(NCGA),计算得到改进的独立B型LNG液舱结构设计方案。 相似文献
11.
R.D. Firouz-Abadi 《Ocean Engineering》2011,38(1):11-21
This paper aims at developing a modal approach for the non-linear analysis of sloshing in an arbitrary-shape tank under both horizontal and vertical excitations. For this purpose, the perturbation technique is employed and the potential flow is adopted as the liquid sloshing model. The first- and second-order kinematic and dynamic boundary conditions of the liquid-free surface are used along with a boundary element model which is formulated in terms of the velocity potential of the liquid-free surface. The boundary element model is used to determine the natural mode shapes of sloshing and their corresponding frequencies. Using the modal analysis technique, a non-linear model is presented for the calculation of the first- and second-order potential which can be used to obtain a reduced-order model for the sloshing dynamics. The results of the presented model are verified with the analytical solution for the second-order analysis of sloshing in a rectangular tank and very good results were obtained. Also, the second-order sloshing in some other example tanks with complex bed shapes is studied. The second-order resonance conditions of liquid sloshing in the example tanks are investigated and some conclusions are drawn. 相似文献
12.
Three-dimensional liquid sloshing in a tank with baffles 总被引：1，自引：0，他引：1
Dongming Liu 《Ocean Engineering》2009,36(2):202-52
A numerical model has been developed to study three-dimensional (3D) liquid sloshing in a tank with baffles. The numerical model solves the spatially averaged Navier-Stokes equations, which are constructed on a non-inertial reference frame having six degree-of-freedom (DOF) of motions. The large-eddy-simulation (LES) approach is employed to model turbulence by using the Smagorinsky sub-grid scale (SGS) closure model. The two-step projection method is employed in the numerical solutions, aided by the Bi-CGSTAB technique to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate volume-of-fluid (VOF) method is used to track the distorted and broken free surface. The baffles in the tank are modeled by the concept of virtual boundary force (VBF) method. The numerical model is first validated against the available analytical solution and experimental data for two-dimensional (2D) liquid sloshing in a tank without baffles. The 2D liquid sloshing in tanks with baffles is then investigated. The numerical results are compared with other results from available literatures. Good agreement is obtained. Finally, the model is used to study 3D liquid sloshing in a tank with vertical baffles. The effect of the baffle is investigated and discussed. 相似文献
13.
This study considers the coupling effects of ship motion and sloshing. The linear ship motion is solved using an impulse-response-function (IRF) method, while the nonlinear sloshing flow is simulated using a finite-difference method. The IRF method requires the frequency-domain solution prior to conversion to time domain, but the computational effort is much less than that of direct time-domain approaches. The developed scheme is verified by comparing the motion RAOs between the frequency-domain solution and the solution obtained by the IRF method. Furthermore, a soft-spring concept and linear roll damping are implemented to predict more realistic motions of surge, sway, yaw, and roll. For the simulation of sloshing flow in liquid tanks, a physics-based numerical approach adopted by Kim [2001. Numerical simulation of sloshing flows with impact load. Applied Ocean Research 23, 53–62] and Kim et al. [2004. Numerical study on slosh-induced impact pressures on three-dimensional prismatic tanks. Applied Ocean Research 26, 213–226] is applied. In particular, the present method focuses on the simulation of the global motion of sloshing flow, ignoring some local phenomena. The sloshing-induced forces and moments are added to wave-excitation forces and moments, and then the corresponding body motion is obtained. The developed schemes are applied for two problems: the sway motion of a box-type barge with rectangular tanks and the roll motion of a modified S175 hull with rectangular anti-rolling tank. Motion RAOs are compared with existing results, showing fair agreement. It is found that the nonlinearity of sloshing flow is very important in coupling analysis. Due to the nonlinearity of sloshing flow, ship motion shows a strong sensitivity to wave slope. 相似文献
14.
This study investigates the coupling effects of six degrees of freedom in ship motion with fluid oscillation inside a three-dimensional rectangular container using a novel time domain simulation scheme. During the time marching, the tank-sloshing algorithm is coupled with the vessel-motion algorithm so that the influence of tank sloshing on vessel motions and vice versa can be assessed. Several factors influencing the dynamic behavior of tank–liquid system due to moving ship are also investigated. These factors include container parameters, environmental settings such as the significant wave height, current velocity as well as the direction of wind, wave and flow current acting on the ship. The nonlinear sloshing is studied using a finite element model whereas nonlinear ship motion is simulated using a hybrid marine control system. Computed roll response is compared with the existing results, showing fair agreement. Although the two hull forms and the sea states are not identical, the numerical result shows the same trend of the roll motion when the anti-rolling tanks are considered. Thus, the numerical approach presented in this paper is expected to be very useful and realistic in evaluating the coupling effects of nonlinear sloshing and 6-DOF ship motion. 相似文献
15.
Sloshing, or liquid free surface oscillation, in containers has many important applications in a variety of engineering fields. The modal method can be used to solve linear sloshing problems and is the most efficient reduced order method that has been used during the previous decade. In the present article, the modal method is used to solve a nonlinear sloshing problem. The method is based on a potential flow solution that implements a two-phase analysis on sloshing in a rectangular container. According to this method, the solution to the mass conservation equation, with a nonpenetration condition at the tank walls, results in velocity potential expansion; this is similar to the mode shapes used in modal method. The kinematic and dynamic boundary conditions create a set of two-space-dimensional differential equations with respect to time. The numerical solution of this set of differential equations, in the time domain, predicts the time response of interfacial oscillations. Modal method solutions for the time response of container sloshing due to lateral harmonic oscillations show a good agreement with experimental and numerical results reported in the literature. 相似文献
16.
The coupling and interactions between ship motion and inner-tank sloshing are investigated by a time-domain simulation scheme. For the time-domain simulation, the hydrodynamic coefficients and wave forces are obtained by a potential-thoery-based three-dimensional (3D) diffraction/radiation panel program in frequency domain. Then, the corresponding simulations of motions in time domain are carried out using convolution integral. The liquid sloshing in a tank is simulated in time domain by a Navier–Stokes solver. A finite difference method with SURF scheme is applied for the direct simulation of liquid sloshing. The computed sloshing force and moment are then applied as external excitations to the ship motion. The calculated ship motion is in turn inputted as the excitation for liquid sloshing, which is repeated for the ensuing time steps. For comparison, we independently developed a coupling scheme in the frequency domain using a sloshing code based on the linear potential theory. The hydrodynamic coefficients of the inner tanks are also obtained by a 3D panel program. The developed schemes are applied to a barge-type FPSO hull equipped with two partially filled tanks. The time-domain simulation results show similar trend when compared with MARIN's experimental results. The most pronounced coupling effects are the shift or split of peak-motion frequencies. It is also found that the pattern of coupling effects between vessel motion and liquid sloshing appreciably changes with filling level. The independent frequency-domain coupled analysis also shows the observed phenomena. 相似文献
17.
Zeki Demirbilek 《Ocean Engineering》1983,10(5):375-382
The hydrodynamic aspects of the motion of a viscous fluid having a free surface in a rolling tank have been investigated. In a sequence of three papers, an analytical technique together with a numerical solution method will be presented to describe the sloshing phenomenon accurately and efficiently. This first paper introduces a linear theory of viscous liquid sloshing and formulates a boundary value problem subject to appropriate conditions. Viscosity is included in the problem formulation and its effects are properly accounted for. The second paper will describe a solution of the problem in function space by the truncation of infinite series. Boundary conditions are satisfied through the use of Fourier series expansions. However, the no-slip condition at the side walls can also be treated in a least-squares sense.Among the results that will be reported in the third paper are the effects of viscosity on liquid sloshing phenomenon and the dependence of viscous dissipation on the Reynolds and Froude numbers. Furthermore, the influence of the tank aspect ratio on viscous dissipation has been explored. These results demonstrate some unknown features of the functional relationships that exist between the dissipated energy and the Reynolds and Froude numbers. Similarly, the dependence of the dissipated energy on the aspect ratio has been analytically studied. The results obtained agree with the physical laws for the range of parameters investigated. 相似文献
18.
Zeki Demirbilek 《Ocean Engineering》1983,10(5):347-358
The hydrodynamic aspects of the motion of a viscous fluid having a free surface in a rolling tank have been investigated. In a sequence of three papers, an analytical technique together with a numerical solution method will be presented to describe the sloshing phenomenon accurately and efficiently. This first paper introduces a linear theory of viscous liquid sloshing and formulates a boundary value problem subject to appropriate conditions. Viscosity is included in the problem formulation and its effects are properly accounted for. The second paper will describe a solution of the problem in function space by the truncation of infinite series. Boundary conditions are satisfied through the use of Fourier series expansions. However, the no-slip condition at the side walls can also be treated in a least-squares sense.Among the results that will be reported in the third paper are the effects of viscosity on liquid sloshing phenomenon and the dependence of viscous dissipation on the Reynolds and Froude numbers. Furthermore, the influence of the tank aspect ratio on viscous dissipation has been explored. These results demonstrate some unknown features of the functional relationships that exist between the dissipated energy and the Reynolds and Froude numbers. Similarly, the dependence of the dissipated energy on the aspect ratio has been analytically studied. The results obtained agree with the physical laws for the range of parameters investigated. 相似文献
19.
Effects of perforated baffle on reducing sloshing in rectangular tank: Experimental and numerical study 总被引：1，自引：1，他引：0
A liquid sloshing experimental rig driven by a wave-maker is designed and built to study liquid sloshing problems in a rectangular liquid tank with perforated baffle. A series of experiments are conducted in this experimental rig to estimate the free surface fluctuation and pressure distribution by changing external excitation frequency of the shaking table. An in-house CFD code is also used in this study to simulate the liquid sloshing in three-dimensional （3D） rectangular tank with perforated baffle. Good agreements of free surface elevation and pressure between the numerical results and the experimental data are obtained and presented. Spectral analysis of the time history of free surface elevation is conducted by using the fast Fourier transformation. 相似文献