共查询到20条相似文献，搜索用时 52 毫秒
1.
2.
泡叶藻及海带藻渣中岩藻聚糖硫酸酯的提取及其抗氧化活性 总被引：1，自引：0，他引：1
采用超声波辅助提取方法提取泡叶藻(Ascophyllum mackaii)及海带(Laminaria japonica)藻渣中岩藻聚糖硫酸酯, 以均匀试验设计建立回归模型优化高效制备提取工艺。采用高效凝胶过滤色谱法(HPGPC)进行了相对分子质量检测及理化性质分析; 利用Fenton 反应检测法、邻苯三酚自氧化法等进行了抗氧化活性研究。结果表明, 优化的高效制备技术的超声波最佳条件为超声70 min, 温度为90℃,水提时间2 h, 料液比1︰ 80, 泡叶藻及海带藻渣中岩藻聚糖硫酸酯的高效提取率分别为4.49%和3.69%,分子质量分别为142 kDa 和136 kDa, 泡叶藻和海带藻渣中的岩藻聚糖硫酸酯均具有较好的清除超氧阴离子自由基、羟自由基能力及还原能力。海带的抗氧化活性总体略高于泡叶藻。 相似文献
3.
褐藻多糖硫酸酯是一种含有硫酸基的水溶性杂聚糖,其化学组成对抗氧化活性有较大的影响。本文对三种褐藻来源的褐藻多糖硫酸酯及其降解产物化学组成和抗氧化活性进行了研究,阐明了不同来源褐藻多糖硫酸酯体外抗氧化活性的构效关系。实验结果表明:1)分子量对抗氧化活性有较大影响,但是对不同褐藻来源的褐藻多糖硫酸酯的影响趋势并不一致。2)岩藻糖、硫酸基和糖醛酸含量对清除超氧阴离子自由基的影响与分子量有一定的关系。对于低分子量样品,岩藻糖和硫酸基含量与抗氧化活性成正相关。3)岩藻糖和硫酸根的比值对羟基自由基的清除能力有一定影响,比值越大,羟基自由基的清除能力越强。分子量、岩藻糖、硫酸基和糖醛酸的含量对褐藻多糖硫酸酯的抗氧化活性的影响依次减小。本研究为褐藻多糖硫酸酯在抗氧化剂保健品和功能食品中的应用提供了基础数据,也为裙带菜、羊栖菜和铜藻的高值化利用提供了理论依据。 相似文献
4.
采用离子交换纤维素色谱DE52柱对微波降解所得λ-卡拉胶(PC2)进行分级,得到3个λ-卡拉胶降解组分(CF1、CF2、CF3).同时,通过光度法研究了CF1、CF2和CF3清除羟基自由基(·OH)、超氧阴离子(O2-·)和H2O2的活性及体外免疫活性.结果表明,3个多糖组分均具有不同程度的清除自由基及促进淋巴细胞增殖的作用,其中,硫酸基含量高的CF3具有较好的抗氧化活性(CF1、CF2、CF3清除·OH、O2-·和H2O2的IC50值分别为:0.217、0.619、0.087 g/L,0.166、0.214、0.0190 g/L和0.602、1.060、0.261 g/L),而分子质量较小的CF1具有较好的体外免疫活性,说明λ-卡拉胶的生物活性不仅与硫酸基含量有关,还与分子质量大小有关. 相似文献
5.
前期研究采用离子交换柱层析和凝胶柱层析,制备到一种球等鞭金藻胞外纯多糖ECPSⅢ。在此基础上,采用化学比色法研究了 ECPSⅢ的体外抗氧化活性;同时,通过测定 ECPSⅢ中的硫酸基和糖醛酸含量,初步分析了ECPSⅢ的理化性质。结果表明, ECPSⅢ具有清除超氧阴离子(O2·ˉ)、羟基自由基(·OH)和过氧化氢(H2O2)等活性氧的能力和一定的还原力。其中, ECPSⅢ对O2·ˉ和·OH的清除能力较强。ECPSⅢ中的硫酸基和糖醛酸含量分别为76.90 mg/g和17.1%,是一种富含硫酸基和糖醛酸的酸性多糖。 相似文献
6.
以吩嗪硫酸甲酯-NADH为超氧阴离子自由基(O_2~(·-))产生、检测体系和EDTANa_2-Fe(Ⅱ)-H_2O_2为羟自由基(~·OH)产生、检测体系,对壳聚糖硫酸酯铜、锌配合物和不同分子质量壳聚糖进行了抗O_2~(·-)和~·OH自由基的活性研究.结果表明,壳聚糖硫酸酯金属配合物对于O_2~(·-)自由基的清除能力明显高于壳聚糖,在质量浓度为0.025 g/L时,壳聚糖硫酸酯铜配合物对O_2~(·-)自由基的清除能力达到94.18%,壳聚糖硫酸酯锌配合物达到93.19%;壳聚糖硫酸酯铜、锌配合物对~·OH自由基的清除能力(67.39%、60.46%)低于相同分子质量的壳聚糖(88.06%),而高于高分子质量壳聚糖761 ku(18.71%);壳聚糖分子质量大小对O_2~(·-)和~·OH自由基的清除能力有较大影响,质量浓度为1.6 g/L壳聚糖分子质量为20 ku时,对O_2~(·-)清除率达54.69%,而分子质量在761 ku时,对O_2~(·-)清除率仅为35.50%;各样品对O_2~(·-)和~·OH自由基的清除能力均随着质量浓度的增加而上升,壳聚糖硫酸酯铜、锌配合物在相当低的浓度下(0.025 g/L)就可以达到明显清除O_2~(·-)自由基的效果(≥90%). 相似文献
7.
8.
以海带岩藻聚糖硫酸酯粗多糖为原料,采用Cu2+-H2O2自由基氧化体系结合超滤技术制备低分子量岩藻聚糖硫酸酯.通过比较粗糖质量和H2O2浓度对产物的分子量和化学组成的影响,确定制备高硫酸根高岩藻糖的低分子量岩藻聚糖硫酸酯的最佳条件是:4.5％ H2O2与0.026 7 mol/L Cu2+降解4.5g岩藻聚糖硫酸酯,得到Fa3(Mw7.68kDa)和Fb3(Mw 3.89kDa)2个组分,其硫酸根含量较高,为30.32％和32.48％.Fa3组分主要由岩藻糖(64.25％)和半乳糖(30.74％)组成,而Fb3的硫酸根和半乳糖含量高于Fa3,但岩藻糖含量下降.比较发现,H2O2浓度由4.5％上升为9％时,制备的低分子量岩藻聚糖硫酸酯的分子量、岩藻糖含量和硫酸根含量都下降.研究发现Fa3和Fb3对流感病毒神经氨酸酶具有较强的抑制作用,尤其是Fa3组分活性较高.说明分子量对岩藻聚糖硫酸酯的神经氨酸酶抑制活性影响要大于硫酸根含量,而且Fa3组分对流感病毒神经氨酸酶的抑制活性也可能与其单糖组成较均一有关. 相似文献
9.
海水螺旋藻C-藻蓝蛋白富硒及其抗氧化特性 总被引：1，自引：0，他引：1
对海水钝顶螺旋藻Spirulina platensis C-藻蓝蛋白的富硒能力及含硒c-藻蓝蛋白对超氧阴离子(O2·)和羟基自由基(·OH)的清除作用进行了研究.结果表明,在添加低浓度硒(40-80mg·L-1)培养时,海水钝顶螺旋藻c.藻蓝蛋白对硒的富集效果显著强于淡水螺旋藻C-藻蓝蛋白.硒浓度为40mg·L-1时,C-藻蓝蛋白对硒的利用率最高,富硒系数最大(O.9%);硒浓度为60mg·L-1时,C-藻蓝蛋白含硒量最高(402mg·kg-1).含硒C-藻蓝蛋白比CJ藻蓝蛋白对超氧阴离子和羟基自由基的清除作用都有所加强,清除效应与C-藻蓝蛋白的含硒量及蛋白浓度呈正相关.C-藻蓝蛋白含硒量最高组(402mg·kg-1)在浓度为180μg·ml-1时,对超氧阴离子和羟基自由基的清除率分别可达到83%和35%,远高于同样条件下其他淡水种类相应蛋白的清除作用.研究结果显示,利用海水培养的螺旋藻能显著提高C-藻蓝蛋白的富硒能力和含硒C-藻蓝蛋白清除超氧阴离子的活性.此研究对开发具有抗氧化功能的含硒C-藻蓝蛋白显示出独特的技术优势和较大的应用潜力. 相似文献
10.
采用人肠道微生物体外厌氧发酵技术,研究人肠道微生物对不同分子量岩藻聚糖硫酸酯的降解利用。分别将五个志愿者的肠道微生物接种到以高分子量和低分子量岩藻聚糖硫酸酯为唯一碳源的培养基中,酵解48h后,采用TLC和PAGE分析分子量变化,PMP-HPLC分析单糖组成变化,GC分析短链脂肪酸的生成情况。结果发现:在人肠道微生物体外降解岩藻聚糖硫酸酯的体系中,岩藻聚糖硫酸酯寡糖和低分子量组分(10—20k Da)含量显著降低,而且酵解产物的单糖组成没有变化,说明被人肠道微生物彻底降解利用;而人肠道微生物对高分子量岩藻聚糖硫酸酯(20k Da)的降解和利用度很低,产物的半乳糖和甘露糖的比例明显下降。低分子量和高分子量岩藻聚糖硫酸酯在酵解后均生成短链脂肪酸乙酸、丙酸和丁酸,但在高分子量岩藻聚糖硫酸酯发酵液中还生成了支链脂肪酸(异丁酸、异戊酸)和戊酸。研究结果表明,人肠道微生物能够彻底降解利用复杂的海带岩藻聚糖硫酸酯寡糖和低分子量组分,但是对高分子量岩藻聚糖硫酸酯的降解率很低。单糖分析说明人肠道微生物能够降解和利用多糖中的所有单糖,产生有利于肠道健康的短链脂肪酸,但是只有低分子量岩藻聚糖硫酸酯能够抑制支链脂肪酸生成。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
13.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
14.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
15.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
16.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.