首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 328 毫秒
1.
Contact metamorphic marbles, affected by metasomatic fluids at the contact to the Bergell and Adamello Intrusives, contain various accessory minerals (zirconolite, allanite, titanite, rutile, geikielite, hoegbomite), which provide new evidence for the hydrothermal mobility of Ti and Zr. In both examples, Ti and Zr migrated along with U, Th, Y and REE in a metasomatic fluid rich in potassium. The composition of the main minerals (fluorine-rich phlogopite, pargasite and titanian clinohumite) and the abundance of fluor-apatite demonstrate that fluorine and phosphorus were important components of the fluid. The textural relationships indicate that the formation of the accessory phases is linked to the crystallization of the hydrous minerals.  相似文献   

2.
Zirconolite, aeschynite-(Ce), titanite and apatite have been found as minor or accessory minerals in a Ti-rich (TiO2=2.1–4.5 wt.%) hydrothermal vein occurring in dolomite marbles at the contact with a tonalite intrusion of the Tertiary Adamello batholith (northern Italy). The vein consists of four distinct mineral zones, comprising from margin to center: (1) forsterite+calcite, (2) pargasite+calcite+titanite+sulfides, (3) phlogopite +calcite+titanite+sulfides, and (4) titanian clinohumite +spinel+calcite+sulfides. Zirconolite occurs in two vein zones only: in the phlogopite zone it is invariably anhedral, often corroded, and exhibits complex chemical zonation patterns. In the titanian clinohumite zone zirconolite is idiomorphic and characterized by a pronounced discontinous chemical zoning, but shows no evidence of corrosion. The considerable compositional variation observed for zirconolite (in wt.%: (REE2O3)=0.74–16.8, UO2=0.59–24.0, ThO2=0.67–17.1) is due to the zoning, and may be attributed to four major substitutions described by the exchange vectors:
1.  (Th, U) (Mg, Fe2+) Ca-1 Ti-1
2.  REE Al Ca-1 Ti-1
3.  REE Fe2+ (Nb, Ta) Ca-1 Ti-1
4.  Hf Zr-1
Exchange vector (2) is effective at total REE2O3 contents up to approximately 5 wt.%, whereas vector (3) is operating at higher concentrations. Both titanite and aeschynite-(Ce) exhibit, like zirconolite, complex chemical zonation patterns which document that the trace element content of the metasomatic fluid was variable during the vein-forming process. As indicated by thermodynamic analysis of the phase assemblages, the vein zones containing the REE-bearing minerals formed at 500–600°C (Ptotal2 kbar) from a reducing fluid rich in H2S, HCl°, HF° and phosphorus, but relatively poor in CO2(XCO 2 0.2). Geochemical and isotopic data are consistent with the interpretation of the fluid as being derived from the nearby tonalite intrusion. The abundance of idiomorphic fluor-apatite as well as textural relations between apatite, the other REE-bearing minerals and the fluorine-bearing hydrous silicates suggest F- and PO 4 3- to be the most likely ligands for complexing REE, Ti, Zr and other high-field-strength elements in the veinforming fluid. The corrosive features observed for zirconolite demonstrate that hydrothermal fluids are able to dissolve zirconolite, which is one of the main components of SYNROC-C, the most promising disposal option for high-level nuclear waste. Therefore, immobilization of radioactive waste in zirconolite can be guaranteed only if an effective sealing material prevents any hydrothermal fluid from access to the final disposal site.  相似文献   

3.
Paleoproterozoic carbonaceous shales in the Tim-Yastrebovskii ancient rift, which underwent zonal metamorphism at 350–550°C, contain REE mineralization of silicates (allanite, thorite, and Ce-P huttonite) fluorcarbonates (bastnaesite and synchysite), phosphates (monazite and xenotime), and REE-bearing apatite. The reason for the wide occurrence of bastnaesite and other REE minerals is relatively high REE concentrations in the sulfide-bearing carbonaceous shales, with these elements accumulated in the organic matter in the course of diagenesis. Reaction textures with REE-bearing chlorite, bastnaesite, and allanite suggest that REE-bearing chlorite and bastnaesite provided REE for the forming of higher temperature allanite and monazite. This is corroborated by the REE patterns of the monazite, allanite, and bastnaesite, which are almost identical and are characterized by the strong predominance of LREE. The replacements of REE minerals during metamorphism at 350–550°C took place via a number successive transitions: (1) Mnz → Aln, Chl REE → Bst, Chl REE → Aln, Bst → Aln and (2) Bst → Mnz and Ap LREE → Mnz. These replacements can be accounted for by prograde metamorphic reactions.  相似文献   

4.
  相似文献   

5.
Some of the most vanadium-rich silicate minerals known are present in green mica schist from the Hemlo gold deposit, Ontario, Canada. Vanadium-rich silicate minerals include green mica (up to 17.6 wt. % V2O3), phlogopite (10.1 wt. % V2O3), pumpellyite (25.7 wt. % V2O3), garnet (18.5 wt. % V2O3), epidote-group minerals (9.1 wt. % V2O3), antimonian vesuvianite (4.3 wt. % V2O3), and titanite (18.5 wt. % V2O5). In addition, minor amounts of V (<2 wt. % V2O3) are present in tourmaline, chlorite, talc and tremolite in other lithologies of the Hemlo deposit. The principal substitution that incorporates V into most of these silicate minerals is Al3+=V3+ in octahedral positions. Vanadium is incorporated into phlogopite mainly by the two substitutions: 3Mg2+ =2V3++ and VIMg2++IVSi4+=VIV3+ +IVAl3+, and all of the three substitutions Ti4++O2- =V3++(OH,F)-, Ti4+=V4+, and 5Ti4+=4V5+ + may have operated in titanite.Vanadium-enriched green mica schist from the Hemlo gold deposit is characterized by uniform Ti/Zr ratios, systematically low Ti, Ni, Co and Sc abundances, and low levels of incompatible elements Th, U, Hf and Zr and is distinct in these respects from its Cr-enriched counterpart. These geochemical features, along with textural evidence (relict quartz and oligoclase phenocrysts), indicate that the V-enriched green mica schist from Hemlo was most likely derived mainly from quartz-oligoclase porphyry. However, its anomalously high V and Cr contents were probably introduced metasomatically from local maficultramafic sources and were fixed in green mica and oxides during the waning of a second regional metamorphism. Vanadium was further remobilized, and its concentration probably enhanced, during the late hydrothermal alteration, which resulted in the formation of the characteristic V-rich calc-silicate minerals.  相似文献   

6.
The composition of accessory REE minerals (allanite, chevkinite, fergusonite, and REE carbonates) in alkaline metasomatic rocks of the Main Sayan Fault (quartz-albite-microcline-riebeckite-aegirine, quartzalbite-microcline-magnetite, and clinopyroxene-albite) was studied using back-scattered scanning electron microscopy. Chevkinite occurs only in quartz-albite-microline metasomatic rock. The paragenesis of allanite and titanite is stable in clinopyroxene-albite metasomatic rocks. Allanite and fergusonite are typical of all zones of the metasomatic column. Chevkinite and allanite are often altered due to interaction with hydrothermal fluid and lose some amount of LREE. Secondary bastnaesite, synchysite, and ancylite are formed after allanite, while secondary monazite is developed after chevkinite. Presumably, the low-temperature alteration of allanite and chevkinite under effect of F?, CO 3 2? , and P 4 3? -bearing fluids had not any significant manifestation in the total REE content in metasomatic rocks.  相似文献   

7.
Geochemical and mineralogical studies were conducted on the 12-m-thick weathering profile of the Kata Beach granite in Phuket, Thailand, in order to reveal the transport and adsorption of rare earth elements (REE) related to the ion-adsorption type mineralization. The parent rock is ilmenite-series biotite granite with transitional characteristics from I type to S type, abundant in REE (592 ppm). REE are contained dominantly in fluorocarbonate as well as in allanite, titanite, apatite, and zircon. The chondrite-normalized REE pattern of the parent granite indicates enrichment of LREE relative to HREE and no significant Ce anomaly. The upper part of the weathering profile from the surface to 4.5 m depth is mostly characterized by positive Ce anomaly, showing lower REE contents ranging from 174 to 548 ppm and lower percentages of adsorbed REE from 34% to 68% compared with the parent granite. In contrast, the lower part of the profile from 4.5 to 12 m depth is characterized by negative Ce anomaly, showing higher REE contents ranging from 578 to 1,084 ppm and higher percentages from 53% to 85%. The negative Ce anomaly and enrichment of REE in the lower part of the profile suggest that acidic soil water in an oxidizing condition in the upper part mostly immobilized Ce4+ as CeO2 and transported REE3+ downward to the lower part of the profile. The transported REE3+ were adsorbed onto weathering products or distributed to secondary minerals such as rhabdophane. The immobilization of REE results from the increase of pH due to the contact with higher pH groundwater. Since the majority of REE in the weathered granite are present in the ion-adsorption fraction with negative Ce anomaly, the percentages of adsorbed REE are positively correlated with the whole-rock negative Ce anomaly. The result of this study suggests that the ion-adsorption type REE mineralization is identified by the occurrence of easily soluble REE fluorocarbonate and whole-rock negative Ce anomaly of weathered granite. Although fractionation of REE in weathered granite is controlled by the occurrence of REE-bearing minerals and adsorption by weathering products, the ion-adsorption fraction tends to be enriched in LREE relative to weathered granite.  相似文献   

8.
The Na Son deposit is a small‐scale Pb–ZnPb–Zn–Ag deposit in northeast Vietnam and consists of biotite–chlorite schist, reddish altered rocks, quartz veins and syenite. The biotite–chlorite schist is intruded by syenite. Reddish altered rocks occur as an alteration halo between the biotite–allanite‐bearing quartz veins and the biotite–chlorite schist. Allanite occurs in the biotite–allanite‐bearing quartz veins and in the proximal reddish altered rocks. Rare earth element (REE) fluorocarbonate minerals occur along fractures or at rim of allanite crystals. The later horizontal aggregates of sulfide veins and veinlets cut the earlier reddish altered rocks. The earlier Pb–Zn veins consist of a large amount of galena and lesser amounts of sphalerite, pyrite and molybdenite. The later Cu veins cutting the Pb–Zn veins include chalcopyrite and lesser amounts of tetrahedrite and pyrite. The occurrences of two‐phase H2O–CO2 fluid inclusions in quartz from biotite–allanite‐bearing quartz veins and REE‐bearing fluorocarbonate minerals in allanite suggest the presence of CO2 and F in the hydrothermal fluid. The oxygen isotopic ratios of the reddish altered rocks, biotite–chlorite schist, and syenite range from +13.9 to +14.9 ‰, +11.5 to +13.3 ‰, and +10.1 to +11.6 ‰, respectively. Assuming an isotopic equilibrium between quartz (+14.6 to +15.8 ‰) and biotite (+8.6 ‰) in the biotite–allanite‐bearing quartz vein, formation temperature was estimated to be 400°C. At 400°C, δ18O values of the hydrothermal fluid in equilibrium with quartz and biotite range from +10.5 to +11.7 ‰. These δ18O values are consistent with fluid that is derived from metamorphism. Assuming an isotopic equilibrium between galena (+1.5 to +1.7 ‰) and chalcopyrite (+3.4 ‰), the formation temperature was estimated to be approximately 300°C. The formation temperature of the Na Son deposit decreased with the progress of mineralization. Based on the geological data, occurrence of REE‐bearing minerals and oxygen isotopic ratios, the REE mineralization is thought to result from interaction between biotite–chlorite schist and REE‐, CO2‐ and F‐bearing metamorphic fluid at 400°C under a rock‐dominant condition.  相似文献   

9.
The paper discusses the mineralogy and geochemistry of altered rocks associated with calcite and dolomite–ankerite carbonatites of the Onguren dyke–vein complex in the Western Transbaikal Region. The alteration processes in the Early Proterozoic metamorphic complex and synmetamorphic granite hosting carbonatite are areal microclinization and riebeckitization; carbonates, phlogopite, apatite, and aegirine occur in the near-contact zones of the dolomite–ankerite carbonatite veins; and silicification is displayed within separated zones adjacent to the veins. In aluminosilicate rocks, microclinization was accompanied by an increasing content of K, Fe3+, Ti, Nb (up to 460 ppm), Th, Cu, and REE; Na, Ti, Fe3+, Mg, Nb (up to 1500 ppm), Zr (up to 2800 ppm), Ta, Th, Hf, and REE accumulated in the inner zone of the riebeckitization column. High contents of Ln Ce (up to 11200 ppm), U (23 ppm), Sr (up to 7000 ppm), Li (up to 400 ppm), Zn (up to 600 ppm), and Th (up to 700 ppm) are typical of apatite–phlogopite–riebeckite altered rock; silicified rock contains up to (ppm): 2000 Th, 20 U, 13000 Ln Ce, and 5000 Ва. Ilmenite and later rutile are the major Nb carriers in alkali altered rocks. These minerals contain up to 2 and 7 wt % Nb2O5, respectively. In addition, ferrocolumbite and aeschynite-(Ce) occur in microcline and riebeckite altered rocks. Fluorapatite containing up to 2.7 wt % (Ln Ce)2O3, monazite-(Ce), cerite-(Ce), ferriallanite-(Ce), and aeschynite-(Ce) are the REE carriers in riebeckite altered rock. Bastnäsite-(Ce), rhabdophane-group minerals, and xenotime-(Y) are typical of silicified rock. Thorite, monazite-(Ce), and rhabdophane-group minerals are the Th carriers.  相似文献   

10.
Paleoproterozoic metapelites of the Vorontsovskaya structure contain accessory REE phosphates (monazite, xenotime, and REE-apatite), fluorine-carbonates (bastnaesite and synchysite), and silicate (allanite). Analysis of phase equilibria involving REE-bearing minerals indicates that bastnaesite is stable only in the greenschist facies and decomposes with the synthesis of monazite at temperatures below the staurolite isograde (490–500°C) at a pressure of 3 kbar. Monazite first appears in the greenschist facies, and its stability expands with increasing temperature, including the granulite facies. A diversity of reaction textures suggests that the mineral is formed in the garnet zone by a reaction of bastnaesite with apatite and by the partial decomposition of REE-bearing chlorite. Monazite is produced in the garnet and staurolite zones by a reaction of allanite with apatite and by a decomposition reaction of REE-bearing apatite.  相似文献   

11.
The fault-line REE-bearing carbonatites of the Arshan deposit were described for the first time twenty years ago (Bulnaev, 1985, 2000). The elevated REE contents were explained by the occurrence of bastnaesite and allanite. Fine parisite grains after bastnaesite phenocrysts were noted as well (Ripp et al., 2000). In the present study, parisite and allanite replacing bastnaesite were examined with SEM/EDS. The investigation has shown the metasomatic origin of both minerals and their essentially cerium composition. Sm, Eu, Gd, Dy, and Yb in amounts of n(0.001–0.1)% were detected with spectrochemical analysis.  相似文献   

12.
Paleoproterozoic kimberlite from the Kimozero area in Karelia is the oldest rock of this type in Russia. It is strongly tectonized, metamorphosed, and it finally transformed into metakimberlite of the prehnite-pumpellyite facies with widespread lanthanide minerals: allanite-(Ce), bastnaesite-(Ce), bastnaesite-(La), parisite-(Ce), and monazite-(Ce). The contacts between their crystals and other metamorphic minerals, e.g., titanite, antigorite, and tremolite, are characterized by induction surfaces of concerted growth. Among lanthanide minerals, allanite-(Ce) is the most abundant. It occurs close to clinochlore pseudomorphs after phlogopite or as intergrowths with titanite in aggregates of tremolite–actinolite, calcite, and dolomite. Allanite crystals from the Kimozero area are not zonal, but vary in lanthanide contents and the Fe3+/Fe2+ ratio in grains no more than tens of microns from one another. Kimozero allanite mostly belongs to the allanite–ferriallanite series (up to 30% of ferriallanite endmember); the lesser amount corresponds to the allanite–Cr-bearing allanite series. At the late stage of metamorphism, allanite was partly replaced with parisite, bastnaesite, or monazite.  相似文献   

13.
In situ U-Pb isotopic measurements were carried out by ion microprobe on the Zr-rich accessory minerals zirconolite [CaZrTi2O7], tranquillityite [Fe82+(ZrY)2Ti3Si3O24] and baddeleyite [ZrO2] in low-K, high-Ti mare basalt 10047 collected during the Apollo 11 mission. The analysed minerals are concentrated in pockets of late-stage mesostasis that comprises an intergrowth of silica, barian K-feldspar and Si-Al-K glass, from a phaneritic, subophitic, basalt comprising mainly pyroxene, plagioclase, ilmenite, cristobalite and troilite. Most Zr-rich minerals are unaltered, however, some tranquillityite is replaced by a complex intergrowth of zirconolite, baddeleyite, ilmenite and fayalite, suggesting that the mineral became unstable during crystallization. Several baddeleyite crystals have also undergone alteration to secondary zircon. Zirconolite was analysed in thin section 10047,11 and tranquillityite and baddeleyite in 10047,227, using a ∼6 μm primary ion beam. Both zirconolite and tranquillityite have significant U and low initial Pb contents, and are highly suitable for Pb/Pb dating. Fifteen analyses of zirconolite give a 207Pb/206Pb age of 3708 ± 7 Ma (207Pb/206Pb:204Pb/206Pb isochron; 95% confidence, including renormalisation of ratios) and twenty-five analyses of tranquillityite give 3710 ± 6 Ma. The 207Pb/206Pb dates are consistent with each other and refine results from an earlier study. Baddeleyite data were less precise, mainly due to lower secondary ionisation efficiency. Our results show that zirconolite and tranquillityite can provide precise isotopic dates and, given their presence in other samples, they represent important U-Pb chronometers for refining lunar geology.  相似文献   

14.
Thermochemical properties have been either measured or estimated for synthetic monazite, LaPO4, and dissakisite, CaLaMgAl2(SiO4)3OH, the Mg-equivalent of allanite. A dissakisite formation enthalpy of ?6,976.5 ± 10.0 kJ mol?1 was derived from high-temperature drop-solution measurements in lead borate at 975 K. A third-law entropy value of 104.9 ± 1.6 J mol?1 K?1 was retrieved from low-temperature heat capacity (C p) measured on synthetic LaPO4 with an adiabatic calorimeter in the 30–300 K range. The C p values of lanthanum phases were measured in the 143–723 K range by differential scanning calorimetry. In this study, La(OH)3 appeared as suitable for drop solution in lead borate and represents an attractive alternative to La2O3. Pseudo-sections were calculated with the THERIAK-DOMINO software using the thermochemical data retrieved here for a simplified metapelitic composition (La = ∑REE + Y) and considering monazite and Fe-free epidotes along the dissakisite-clinozoïsite join, as the only REE-bearing minerals. Calculation shows a stability window for dissakisite-clinozoïsite epidotes (T between 250 and 550°C and P between 1 and 16 kbar), included in a wide monazite field. The P–T extension of this stability window depends on the bulk-rock Ca-content. Assuming that synthetic LaPO4 and dissakisite-(La) are good analogues of natural monazite and allanite, these results are consistent with the REE-mineralogy sequence observed in metapelites, where (1) monazite is found to be stable below 250°C, (2) around 250–450°C, depending on the pressure, allanite forms at the expense of monazite and (3) towards amphibolite conditions, monazite reappears at the expense of allanite.  相似文献   

15.
The paper presents mineralogical features and EPMA results of the Khamambettu carbonatites. The mineralogical data suggest that these rocks have been generated in magmatic and hydrothermal stages. Mineral geothermometer for carbonatite give temperatures of 790°–980°C. Fluid inclusion measurements in monazite (hydrothermal stage) give temperatures of 220°–290°C. One of the features of the carbonatites is high content of magnesia that is defined by the presence of dolomite, olivine, spinel, phlogopite, Mg-rich ilmenite. Chloritization, serpentinization, amphibolization, silicification processes and occurrence of barite, monazite-(Ce), strontianite, celestine are related to hydrothermal stage. Hydrothermal minerals at the Khamambettu were formed by recrystallization of primary carbonatite minerals in the presence of Ba, (SO4)2?, REE and Si carried in solution by the hydrothermal fluid.  相似文献   

16.
The Benjamin River apatite prospect in northern New Brunswick, Canada, is hosted by the Late Silurian Dickie Brook plutonic complex, which is made up of intrusive units represented by monzogranite, diorite and gabbro. The IOA ores, composed mainly of apatite, augite, and magnetite at Benjamin River form pegmatitic pods and lenses in the host igneous rocks, the largest of which is 100 m long and 10–20 m wide in the diorite and gabbro units. In this study, 28 IOA ore and rock samples were collected from the diorite and gabbro units. Mineralogical observations show that the apatite–augite–magnetite ores are variable in the amounts of apatite, augite, and magnetite and are associated with minor amounts of epidote‐group minerals (allanite, REE‐rich epidote and epidte) and trace amounts of albite, titanite, ilmenite, titanomagnetite, pyrite, chlorite, calcite, and quartz. Apatite and augite grains contain small anhydrite inclusions. This suggests that the magma that crystallized apatite and augite had high oxygen fugacity. In back scattered electron (BSE) images, apatite grains in the ores have two zones of different appearance: (i) primary REE‐rich zone; and (ii) porous REE‐poor zone. The porous REE‐poor zones mainly appear in rims and/or inside of the apatite grains, in addition to the presence of apatite grains which totally consist of a porous REE‐poor apatite. This porous REE‐poor apatite is characterized by low REE (<0.84 wt%), Si (<0.28 wt%), and Cl (<0.17 wt%) contents. Epidote‐group minerals mainly occur in grain boundary between the porous REE‐poor apatite and augite. These indicate that REE leached from primary REE‐rich apatite crystallized as allanite and REE‐rich epidote. Magnetite in the ores often occurs as veinlets that cut apatite grains or as anhedral grains that replace a part of augite. These textures suggest that magnetite crystallized in the late stage. Pyrite veins occur in the ores, including a large amount of quartz and calcite veins. Pyrite veins mainly occur with quartz veins in augite. These textures indicate pyrite veins are the latest phase. Apatite–augite–magnetite ore, gabbro–quartz diorite and feldspar dike collected from the Benjamin River prospect contain dirty pure albite (Ab98Or2–Ab100) under the microscope. The feldspar dikes mainly consist of dirty pure albite. Occurrences of the dirty pure albite suggest remarkable albitization (sodic alteration) of original plagioclase (An25.3–An60 in Pilote et al., 2012) associating with intrusion of monzogranite into gabbro and diorite. SO42? bearing magma crystallized primary REE‐rich apatite, augite and anhydrite reacted with Fe in the sodic fluids, which result in oxidation of Fe2+ and release of S2? into the sodic fluids. REE, Ca and Fe from primary REE‐rich apatite, augite and plagioclase altered by the sodic fluids were released into the fluids. Then Fe3+ in the sodic fluids precipitated as Fe oxides and epidote‐group minerals in apatite–augite–magnetite ores. Finally, residual S2? in sodic fluids crystallized as latest pyrite veins. In conclusion, mineralization in Benjamin River IOA prospect are divided into four stages: (1) oxidized magmatic stage that crystallized apatite, augite and anhydrite; (2) sodic metasomatic stage accompanying alteration of magmatic minerals; (3) oxidized fluid stage (magnetite–epidote group minerals mineralization); and (4) reduced fluid stage (pyrite mineralization).  相似文献   

17.
Sapphirine/kornerupine-bearing rocks occur within the anorthosites of the Messina layered intrusion in the Limpopo mobile belt of Zimbabwe. The XMg range of the major minerals is as follows: cordierite (0.98-0.93); enstatite (0.97-0.86); chlorite (0.98-0.92); phlogopite (0.98-0.90); sapphirine (0.98-0.86); kornerupine (0.94-0.88); gedrite (0.96-0.85); spinel (0.92-0.78). There are four rock types, the constituent minerals of which have different values, which decrease in the above mineral order; other minerals are corundum, sillimanite and relict kyanite. We recognise twenty reactions without phlogopite and nine reactions involving phlogopite. The textural relations and the plots of the microprobe data of coexisting minerals in the MgO-Al2O3-SiO2-(H2O) system are consistent with the following sequence of main reactions: (1) enstatite+corundum cordierite+sapphirine; (4) sapphirine+sillimanite cordierite+corundum; (8) kornerupine+corundum cordierite+sapphirine; (13) kornerupine cordierite+sapphirine+enstatite; (15) enstatite+spinel chlorite+sapphirine; (18) cordierite+sapphirine chlorite+corundum; (20) sapphirine chlorite+corundum+spinel. The early reactions are shown by coarse-grained reaction intergrowths, kornerupine and gedrite breakdown is shown by finer-grained symplectites, and the latest reactions by very fine-grained products in micro-fractures. These selected reactions illustrate a remarkably steep trajectory from thePT peak close to 10 kbar and 800° C to the minimum observable at 3.5–4.5 kbar and 700° C as indicated by the pure MASH system. Very rapid uplift took place under nearly isothermal conditions. The protolith of this material was possibly sedimentary, derived from altered volcanic rocks. The bulk composition is close to the composition of kornerupine or to a mixture of alunite, chlorite and pyrophyllite. These texturally and mineralogically complex rocks contain a wealth of relevant data for documenting crustal uplift history.  相似文献   

18.
The Jiangzhuang ultrahigh‐pressure (UHP) metamorphic peridotite from south Sulu, eastern China occurs as a layer within gneiss with eclogite blocks, and consists of coarse‐grained garnet porphyroblasts and a fine‐grained matrix assemblage of garnet + forsterite + enstatite + diopside ± phlogopite ± Ti‐clinohumite ± magnesite. Both types of garnet are characterized by high MgO content and depletion of light rare earth element (LREE) and enrichment of heavy rare earth element, but the matrix garnet has lower MgO, TiO2 and higher Cr2O3 and REE contents. Diopside displays LREE enrichment, and has low but variable large‐ion lithophile element (LILE) contents. Phlogopite is a major carrier of LILE. Ti‐clinohumite contains high Nb, Ta, Cr, Ni, V and Co contents. The P–T conditions of 4.5–6.0 GPa and 850–950 °C were estimated for matrix mineral assemblages. Most peridotites are depleted in Al2O3, CaO and TiO2, and enriched in SiO2, K2O, REE and LILE. In contrast to phlogopite‐free peridotites, the phlogopite‐bearing peridotites have higher K2O, Zr, REE and LILE contents. Zircon occurs only in the phlogopite‐bearing peridotites, shows no zoning, with low REE contents and Th/U ratios, and yields tight U–Pb ages of 225–220 Ma, indicating the peridotites experienced consistent Triassic UHP metamorphism with subducted supercrustal rocks. These data demonstrate that the Jiangzhuang peridotites were derived from the depleted mantle wedge of the North China Craton, and experienced various degrees of metasomatism. The phlogopite‐free peridotites may have been subjected to an early cryptic metasomatism at UHP conditions of the mantle wedge, whereas the phlogopite‐bearing peridotites were subjected to a subsequent strong metasomatism, characterized by distinctly enrichment in LILE, LREE, Zr and K as well as the growth of zircon and volatile‐bearing minerals at UHP subduction conditions. The related metasomatism may have resulted from the filtration of fluids sourced mainly from deeply subducted supracrustal rocks.  相似文献   

19.
Hoegbomite occurs sparingly in minute (mostly 0.1 mm) grains with fine-grained hercynite, magnetite, and rutile in two coarse-grained kornerupine-cordierite-sillimanite rocks from Ellammankovilpatti, Tamil Nadu, India. The hoegbomite is Ti-poor (2.5 wt% TiO2), Fe-rich (25–26% Fe as FeO), and contains 6.2–6.8% MgO, 59.8–60.1% Al2O3, 1.0–1.3% ZnO, 0.3–0.7% Cr2O3 and 0.02% Li2O. Minor amounts (estimated not to exceed 0.2 wt% oxide) of V, Co, Ni, Ga, and Sn were detected on the electron microprobe, but Be, Nb, and Zr were not detected with the ion microprobe mass analyser. Assuming the crystal structure refined by Gatehouse and Grey (1982) to be applicable to the Ellammankovilpatti hoegbomite, the analyses were recalculated on a basis of 22 cations, 30 oxygens, and two hydroxyls, resulting in 49 to 53% of the iron being ferric. Identification of hoegbomite was confirmed by X-ray powder diffraction. Associated cordierite (Fe/(Fe+Mg)=0.14) and kornerupine (Fe/(Fe+Mg)= 0.27) contain 0.02 weight % Li2O and 0.05–0.07% BeO, while only the kornerupine contains B2O3 — 1.57% (ion microprobe analyses). Hoegbomite and the other oxides may have crystallized at temperatures between 680 and 720° C (P6.5 kbar) following attainment of peak conditions by the reaction: kornerupine+sillimanite±rutile+ZnO+H2O+O2 =cordierite+chlorite+hercynite+hoegbomite +magnetite+B2O3.The conditions for hoegbomite formation at Ellammankovilpatti appear to be characteristic of many hoegbomite parageneses. Critical for hoegbomite are silica undersaturation and relatively high oxygen and water activities at fairly high temperatures, conditions which are most commonly attained in later phases of a metamorphic cycle in upper amphibolite- and granulite-facies terrains.  相似文献   

20.
Kyzylkumite has been found in Cr-V-bearing metamorphic rocks of the Sludyanka Complex, Southern Baikal region; it has been identified by X-ray powder diffraction method. This is a late secondary mineral developed after Ti-V-oxides (schreyerite, berdesinskiite) and V-bearing rutile and titanite. Kyzylkumite represents a new structural type with composition Ti4V 2 3+ O10(OH)2 corresponding to octahedral coordination of Ti4+ and V3+. Its unit-cell dimensions are: a = 8.4787(1), b = 4.5624(1), c = 10.0330(1) Å, β = 93.174(1)°. The ideal formula of kyzylkumite Ti4V 2 3+ O10(OH)2 corresponds to composition, wt %: 65.56 TiO2, 30.75 V2O3, 3.69 H2O. Indeed, the contents (wt %) of these constituents range from 62 to 70 TiO2 and from 23 to 33 V2O3. Variations in contents and the Ti/V value are caused by partial substitution V3+ for V4+, isovalent substitutions Ti4+ and V3+ for V4+ and Cr3+, respectively, and coupled substitution V3+ + OH? ? Ti4+ + O2?. Smyslova et al. (1981)—the discovereres of kyzylkumite—assumed its composition to be the same as for schreyerite V 2 3+ Ti3O9 that principally different from kyzylkumite from the Sludyanka Complex. Therefore, re-examination of the kyzylkumite holotype or cotype from its type locality is needed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号