共查询到20条相似文献,搜索用时 68 毫秒
1.
富钴结壳矿区申请需要解决的两个重要问题 总被引:2,自引:0,他引:2
讨论了我国富钴结壳矿区申请需要解决的两个重要问题:①资源量评价方法;②结壳调查测站的位置和水深.认为在资源量评价中,应采用“平均含矿覆盖率”与“见矿率”综合使用的方法,同时必须对所有准备申请的拖网、海底摄像/海底照相有效测站的位置和水深进行校正,对我国准备申请的富钴结壳调查海山的资源量进行重新计算. 相似文献
2.
海山富钴结壳的圈矿方法 总被引:5,自引:0,他引:5
对海山富钴结壳的圈矿方法进行了分析和探讨,指出海山富钴结壳圈矿的主要方法和步骤为:(1)挑选富钴结壳发育良好的海山。除大片连续厚层板状分布的结壳发育良好的大型平顶海山是重点调查的目标海山外,规模较小的尖顶海山是近年来新的圈矿目标海山。(2)确定矿块的边界位置。对选定的海山进行深海摄像、电视抓斗、拖网和浅钻等多种手段的调查,通过所取得的综合结果对矿块边界进行判断,确定准确的矿块边界。(3)计算结壳的覆盖率。利用调查所获得的矿块相关的数据和信息对矿块内结壳厚度和结壳覆盖率以及矿区资源量进行评估。 相似文献
3.
利用电感耦合等离子体原子发射光谱仪(ICP-AES)和重量法,对麦哲伦海山链西北端M海山9个站位、17个富钴结壳样品的主要元素和稀土元素进行了分析,分析结果显示,该海山富钴结壳是水成成因的,且多数富钴结壳在生长过程中没有受到磷酸盐化作用的影响.推广富钴结壳Co地层学年代计算公式的应用范围,并基于此建立了研究区富钴结壳的... 相似文献
4.
中太平洋富钴结壳Co元素地球化学特征 总被引:1,自引:0,他引:1
对在中太平洋研究区5座海山调查时获取的38个富钴结壳样品中主要金属元素的含量进行了化学分析,探讨了不同海山富钴结壳中Co元素含量的变化规律及结壳中元素间的相关关系,结果表明:(1)5座海山富钴结壳中的各主要金属元素含量相近,38个富钴结壳样品中Co元素的平均含量为0.67%,具有一定的开发前景。(2)不同海山富钴结壳中Co元素含量有一定变化,其变化与富钴结壳的类型、海水水深、地形地貌以及成矿作用等有密切的关系。Co元素在板状结壳中的含量为最高,在钴结核中的含量次之,而在砾状结壳中的含量为最低;富钴结壳中Co元素含量与海水水深呈负相关,浅水区富钴结壳中Co元素的含量明显高于深水区;海山地形地貌对Co元素的含量及富钴结壳的发育有一定影响,海山的椭圆状分支、支脉及边缘部分,Co元素的含量相对较高,富钴结壳发育得较好;Co元素富集成矿作用还主要受锰、铁水成成矿作用的控制。(3)富钴结壳中金属元素之间存在不同程度的相关性。Mn元素分别与Co、Ni、Cu、Zn、Mg、Na、Ba、Ti等元素呈强烈的正相关,而分别与Al、Si、Ca、P、Fe、Sr等元素呈负相关;Co元素分别与Cu、Al、P、Ca等元素呈负相关;Ca元素与P元素呈强烈正相关。 相似文献
5.
6.
针对"蛟龙"载人潜水器深海探测中利用超声波对富钴结壳进行原位探测的问题,在实验室模拟不同地区的富钴结壳与各类型基岩,使用2.25 MHz超声波探头发射的的高频超声波信号对采用地质拖网采集的富钴结壳进行测量。首先,对不同海山的富钴结壳进行了声速的测量与回波强度的测试。然后,对富钴结壳样品的下伏基岩进行测试,通过数字示波器得到反射波形数据,并分析得到其回波强度,通过回波强度对富钴结壳下的基岩种类进行分类。实验结果表明,样品的下伏基岩蚀变玄武岩、碳酸盐沉积物、钙质远洋沉积与泥质块的反射波形不同,回波强度存在差异,高频声波能够有效地区分富钴结壳下基岩的种类,为载人潜水器的水下原位测厚提供了可能。 相似文献
7.
岩石拖网是一种获取结壳和岩石样品的常规地质取样设备,广泛应用于富钴结壳调查和海洋区域地质调查。重点了阐述岩石拖网工作方法、位置精度控制和安全措施,并通过实例说明岩石拖网的成功应用。探讨了进一步高岩石拖网的安全性、成功率和定位精度,使其成为富钴结壳调查中浅钻调查的补充,弥补浅钻调查获取样品量少的不足。 相似文献
8.
西太平洋Lamont海山中新世以来富钴结壳成矿环境的演化 总被引:5,自引:0,他引:5
分析了西太平洋Lamont海山12个站位33个富钴结壳样品的主元素和稀土元素,结果表明,该海山富钴结壳成因类型属于水成成因,并且在形成过程中基本未受到磷酸盐化作用的影响。Lamont海山的一个富钴结壳样品剖面的电子探针数据显示,该海山富钴结壳的成矿环境在新第三纪以来至少存在2个演化阶段:第1阶段,23~15 Ma,富钴结壳中Mn相对富集,成矿环境以富氧贫硅为特征;第2阶段,15~0 Ma,富钴结壳中Fe相对富集,成矿环境以贫氧富硅为特征。成矿环境的氧化能力总体上呈现下降的趋势。联系新生代世界大洋,尤其是西太平洋的地质演化背景,认为引起成矿环境演变的原因主要是西太平洋大洋板块的WNW向漂移和新第三纪以来全球水道开合,造成了Lamont海山所处海区最低含氧带逐渐减薄。 相似文献
9.
10.
全球三大洋海山钴结壳资源量估算 总被引:8,自引:0,他引:8
钴结壳具有Co、Ni、Cu和Mn及其他金属的潜在矿产资源和储存在结壳层中古环境信息的双重意义。与深海多金属结核和热液硫化物矿床相比,具有较高Co、Ni和Pt含量的海山钴结壳有可能成为商业勘探的潜在目标。为合理地估算出全球三大洋海山钴结壳资源量,基于我国西太平洋海山钴结壳拖网采样调查资料和对太平洋海山钴结壳资源分布规律和钴结壳矿区圈定参数指标的深入研究,按海山不同高度、不同洋壳年龄赋予不同结壳厚度,进而计算出全球三大洋海山钴结壳分布面积为3 039 452.14km2和干结壳资源量为(1 081.166 1~2 162.332 2)×108 t。太平洋海山钴结壳分布面积为2 123 087.12km2和干结壳资源量为(513.244~1 026.488)×108 t,大西洋海山钴结壳分布面积为512 509.74km2和干结壳资源量为(116.503 2~233.006 4)×108 t,印度洋海山钴结壳分布面积为403 855.28km2和干结壳资源量为(81.484 9~162.969 8)×108 t。三大洋海山钴结壳的Mn、Co、Ni和Cu金属量分别为(138.848 0~277.696 0)×108 t,(3.967 6~7.935 2)×108 t、(2.793 6~5.587 2)×108 t和(0.825 1~1.650 2)×108 t。根据钴结壳的Co含量、Co通量和厚度相关分析,所赋予的钴结壳厚度占理论推测厚度的6.10%~12.20%,这与Ku等得出"钴结壳生长时间约占其整个生命史4%"的认识非常相近。三大洋海山钴结壳实测厚度与赋值厚度对比分析表明,太平洋海山钴结壳赋值厚度平均值为1.87cm,实测厚度平均值为1.77cm,相对误差为5.35%,大西洋和印度洋相对误差分别为18.18%和23.23%。研究数据表明按海山高度和洋壳年龄所赋的钴结壳厚度基本合理,估算出的钴结壳资源量基本可靠。本文首次估算出三大洋海山钴结壳资源量,为整个海盆和三大洋海山钴结壳资源量估算提供了新方法。 相似文献
11.
12.
探讨了壳寡糖及全乙酰壳寡糖的制备方法,通过正交实验考察了原料、温度、时间对降解产物的影响.制备了八种寡糖(八乙酰壳二糖、十一乙酰壳三糖、十四乙酰壳四糖和十七乙酰壳五糖,以及N,N′-二乙酰壳二糖、N,N′,N″-三乙酰壳三糖、N,N′,N″,N′′′四乙酰壳四糖和N,N′,N″,N′′′,N′′′′-五乙酰壳五糖),并通过IR、NMR及MS等确定了其化学结构. 相似文献
13.
14.
Coastal and estuarine habitat mapping, using LIDAR height and intensity and multi-spectral imagery 总被引:3,自引:1,他引:2
Guillem Chust Ibon Galparsoro ngel Borja Javier Franco Adolfo Uriarte 《Estuarine, Coastal and Shelf Science》2008,78(4):633-643
The airborne laser scanning LIDAR (LIght Detection And Ranging) provides high-resolution Digital Terrain Models (DTM) that have been applied recently to the characterization, quantification and monitoring of coastal environments. This study assesses the contribution of LIDAR altimetry and intensity data, topographically-derived features (slope and aspect), and multi-spectral imagery (three visible and a near-infrared band), to map coastal habitats in the Bidasoa estuary and its adjacent coastal area (Basque Country, northern Spain). The performance of high-resolution data sources was individually and jointly tested, with the maximum likelihood algorithm classifier in a rocky shore and a wetland zone; thus, including some of the most extended Cantabrian Sea littoral habitats, within the Bay of Biscay. The results show that reliability of coastal habitat classification was more enhanced with LIDAR-based DTM, compared with the other data sources: slope, aspect, intensity or near-infrared band. The addition of the DTM, to the three visible bands, produced gains of between 10% and 27% in the agreement measures, between the mapped and validation data (i.e. mean producer's and user's accuracy) for the two test sites. Raw LIDAR intensity images are only of limited value here, since they appeared heterogeneous and speckled. However, the enhanced Lee smoothing filter, applied to the LIDAR intensity, improved the overall accuracy measurements of the habitat classification, especially in the wetland zone; here, there were gains up to 7.9% in mean producer's and 11.6% in mean user's accuracy. This suggests that LIDAR can be useful for habitat mapping, when few data sources are available. The synergy between the LIDAR data, with multi-spectral bands, produced high accurate classifications (mean producer's accuracy: 92% for the 16 rocky habitats and 88% for the 11 wetland habitats). Fusion of the data enabled discrimination of intertidal communities, such as Corallina elongata, barnacles (Chthamalus spp.), and stands of Spartina alterniflora and Phragmites australis, which presented misclassification when conventional visible bands were used alone. All of these results were corroborated by the kappa coefficient of agreement. The high classification accuracy found here, selecting data sources, highlights the value of integrating LIDAR data with multi-spectral imagery for habitat mapping in the intertidal complex fringe. 相似文献
15.
Adsorption and desorption of proteins and polyamino acids by clay minerals and marine sediments 总被引:1,自引:0,他引:1
The adsorption and desorption of proteins and polyamino acids on illite, montmorillonite, goethite, and marine sediments was investigated. Three 14C-labeled hydrophilic proteins, Rubisco from C. reinhardtii, and GroEL and GroES from genetically modified Escherichia coli, were synthesized and purified for this study. The proteins were strongly and rapidly adsorbed by the clay minerals and marine sediments, and much of the adsorbed protein was not readily desorbed. Sodium dodecyl sulfate (SDS) extraction and separation by SDS-polyacrylamide gel electrophoresis (PAGE) and sucrose density gradients showed that Rubisco and GroEL were adsorbed on illite and sediments in their original forms. The apparent adsorption partition coefficients of the proteins were on the order of 102 l/kg on illite, 103–104 l/kg on goethite and montmorillonite, and 200 and 75 l/kg on Skan Bay and Resurrection Bay (Alaska) sediments, respectively. These partition coefficients are sufficiently large to permit sedimentary protein preservation via an adsorptive mechanism. Generally, basic polyamino acids had greater adsorption partition coefficients than acidic polyamino acids. Molecular size did not affect the electrostatic interaction between polyamino acids and mineral surfaces. Adsorption of bovine serum albumin (BSA) and negatively charged polyamino acids inhibited Rubisco adsorption, while positively charged cytochrome c and polyamino acids increased Rubisco adsorption. These results indicate that electrostatic interactions dominated in protein adsorption. 相似文献