共查询到20条相似文献，搜索用时 156 毫秒
1.
The synthetic fiber ropes such as the aramid and polyester ones applied to deepwater mooring systems always exhibit obvious time-dependent like creep and recovery behaviors due to the viscoelasticity and viscoplasticity of the materials, which affect not only the modulus evolution of mooring ropes but also the dynamic response and fatigue performance of the taut-wire mooring system. In the present work, the Schapery's theory combined with Owen's one-dimensional rheological model is proposed to describe both viscoelastic and viscoplastic behaviors of the aramid and polyester fiber ropes. In the viscoelastic part, the Prony series is chosen to describe the transient compliance, which is more accurate than other functions especially under complex loadings; in the viscoplastic part, the adopted viscoplastic function is more suitable for the strain hardening behaviors and the stable state of the materials under variable stress levels. Detailed methods for identifying the model parameters are proposed, which can be applied to any component of the fiber rope such as the fiber, yarn, sub-rope and rope. The present model is capable of quantitatively capturing the change-in-length properties of fiber ropes reported by Flory et al., and can be easily incorporated in the commercial software for mooring analysis. In order to examine the feasibility and precision of the model, the viscoelastic and viscoplastic strains are calculated and compared with experimental and other numerical simulation results. It is observed that there is a good agreement between the predicted and experimental data, and the physically irrational results caused by the key parameter DP previously noticed by Chailleux and Davies can be well eliminated. The present model provides a better tool to further understand the nonlinear behaviors of synthetic fiber ropes for deepwater moorings. 相似文献
2.
3.
4.
This paper focuses on the rate-dependent yield stress, undrained strength, and long-term undrained strength of clay. Various oedometer and triaxial tests were performed on Wenzhou marine clay. The uniqueness of rate-dependent and long-term yield stress and strength is discussed. A new anisotropic elastic viscoplastic model is proposed by adopting the concept of anisotropy and isotropy processes. The determination of model parameters is discussed, demonstrating how all model parameters can be determined in a straightforward way requiring the same basic tests as for the Modified Cam Clay model. Experimental verifications are carried out using the constant strain-rate and creep tests on the Wenzhou marine clay. 相似文献
5.
Hong-Jian Liao Li-Jun Su Wu-Chuan Pu Jian-Hua Yin 《Marine Georesources & Geotechnology》2003,21(3):183-200
A kind of diatomaceous soft rock and its constitutive model are studied in this article. Based on Yin and Graham's (1999) 3-D elastic viscoplastic constitutive model, the formulation under a triaxial stress state is established, and it is used to simulate the time-dependent stress-strain behavior and effective stress path of consolidated undrained triaxial tests of both normally consolidated and overconsolidated soft rock. The comparison between the model predictions and measured results shows that their agreement is good. This demonstrates that the constitutive equation established here can be used to simulate the time-dependent stress-strain behavior of the soft rock under triaxial stress condition. 相似文献
6.
《Marine Georesources & Geotechnology》2013,31(3-4):183-200
A kind of diatomaceous soft rock and its constitutive model are studied in this article. Based on Yin and Graham's (1999) 3-D elastic viscoplastic constitutive model, the formulation under a triaxial stress state is established, and it is used to simulate the time-dependent stress-strain behavior and effective stress path of consolidated undrained triaxial tests of both normally consolidated and overconsolidated soft rock. The comparison between the model predictions and measured results shows that their agreement is good. This demonstrates that the constitutive equation established here can be used to simulate the time-dependent stress-strain behavior of the soft rock under triaxial stress condition. 相似文献
7.
Static analysis of stiffened shells has been carried out using an eight-noded isoparametric element for the shell and a three-noded curved beam element for the stiffener. A same displacement function is used for the shell and the stiffener elements. A modified technique has been followed to analyse the shell, which is an improvement over the degenerated shell concept. The stiffness matrix of the curved beam element is generated irrespective of its position and orientation within the shell element. The stiffness matrix of the stiffener is then transferred to all the nodes of the shell element. Numerical examples of stiffened shells with concentric and eccentric stiffeners have been analysed and the results presented together with those available in published literature. 相似文献
8.
马氏珠母贝选群F1的表型性状的相关和通径分析 总被引：3，自引：0，他引：3
从7月龄的F1群体随机取样120个体,测量表型性状并进行相关和路径分析。所测量的表型性状包括壳长、壳高、壳宽、壳重和仝湿重共5个指标。结果表明：（1）壳长、壳高、壳宽、壳重和全湿重存在显著的相关性（P〈0．05）。全湿重与壳长、壳高、壳宽和壳重存在显著的正相关（P〈0．05）,相关系数分别为0．8970、0．6974、0．6521和0．5486。（2）壳重、壳高、壳宽和壳长对全湿重具有正直接影响,其值分别为0．6356、0．1872、0．1814和0．0599。结果说明了通过直接选择或间接选择可以改良马氏珠母贝选群F1的壳长、壳高、壳宽、壳重和全湿重等生长性状。 相似文献
9.
1 .IntroductionEpicontinental sea or land could formfromcontinental shelf because of the decreasing sea levelduring Quaternary.There is a large-area shell sand deposit more than ten meters thick in the neriticzone of China .To use the abundant marine shell sandresource as engineering material for ocean engi-neering and port engineeringis veryimportant .Sand (Gred and Bjorn,1999) ,fine sand (Zhangetal .,2002) , mediumand coarse sand (Qiuet al .,1995) ,highly weathered stone ballast (Zhanetal… 相似文献
10.
以马氏珠母贝(Pinctada fucata martensii)黄壳色作为选育指标构建了黄壳家系,对其4个生长性状和黄壳色性状分离比进行了统计分析,并测定了黄壳家系中黄壳、褐壳色个体不同组织中的总抗氧化能力(TAC)。结果发现:黄壳色性状能遗传并发生分离,其分离不完全符合孟德尔遗传分离定律;褐壳色亲本不会产生黄壳色子代,推测褐壳色是纯合子;第一代黄壳家系5、7月龄贝仅壳宽值显著小于褐壳家系(P0.05),壳高、壳长、总质量差异不显著, 11月龄贝仅壳长和壳宽值显著小于褐壳家系, 14、20月龄贝的壳高、壳长、壳宽、总质量这4个生长性状均极显著小于褐壳家系(P0.01);在第一代6个黄壳家系内,黄壳、褐壳色个体的4个生长性状差异不显著;黄壳色贝在足、心、性腺中的TAC显著低于褐壳色贝(P0.05);在鳃、闭壳肌、消化腺组织中TAC高于褐壳色贝,但差异不显著。 相似文献
11.
为探讨形态性状对体质量的影响,指导毛蚶的选育,以毛蚶天津群体为研究对象,测量壳长、壳宽、壳高、体质量,并进行统计分析。结果表明,壳宽是体质量的主要影响因子,其与体质量的相关系数为0.953,直接作用为0.505,间接作用为0.448,壳长、壳高间接作用分别为0.483、0.480,综合决定系数为0.706 6。毛蚶体质量多元回归方程为Y=-40.8+0.438X1+1.124X2+0.469X3,R2=0.924;以壳宽为自变量,体质量回归方程为:Y=5.443×10-3X22.519,R2=0.937。 相似文献
12.
A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive. 相似文献
13.
不同贝龄毛蚶壳形态性状对体质量的影响 总被引：4，自引：0，他引：4
选取毛蚶(Scapharca subcrenata Lischke)1龄、2龄和3龄个体各100粒,分别测量壳长、壳高和壳宽等壳形态性状,并称其体质量,采用多元分析的方法分析了各表型性状间的相关性,以及壳形态性状对体质量的影响效果。结果表明,各性状间呈正相关,且达到极显著水平(P0.001);通径分析与决定程度分析的结果相似,不同贝龄期影响毛蚶体质量的主要因素是不同的,壳长是影响1龄毛蚶体质量的主要因素,壳长和壳宽是影响2龄毛蚶体质量的主要因素,且两者的共同决定系数最大(0.244),壳宽是影响3龄毛蚶体质量的主要因素,其与壳高的共同决定系数最大(0.230)。 相似文献
14.
王文正 《海洋地质与第四纪地质》2001,21(4):117-119
利用X射线衍射物相分析方法，对不同生长阶段的中国皱纹盘鲍壳体矿物组成进行了分析，结果表明，中国皱纹盘鲍壳体矿物成分包括文石、方解石、白云石3种，文石属于主要成分，另两者属于次要组分；从皱纹盘鲍生长的幼体到成体，壳体的矿物组成中文石所占的比例逐渐降低，方解石的比例逐渐增加，而白云石含量基本保持恒定。 相似文献
15.
长牡蛎的壳色有很多种,其中壳色较深个体(黑壳)比较浅个体(白壳)的外套膜中含有更多的黑色素。本研究采用高效液相色谱-质谱法(HPLC-MS/MS)测定天然海水中白壳与黑壳长牡蛎外套膜双酚A (BPA)含量,发现黑壳长牡蛎外套膜中的BPA含量较白壳长牡蛎低(P0.05)。由于黑色素合成过程中的关键——酶酪氨酸酶是一种酚氧化酶,可以通过对氧化酚类或芳胺类等多种底物的氧化起催化作用,推测其在BPA等酚类毒物的降解中也发挥重要作用。为了进一步研究不同黑色素含量牡蛎对BPA降解能力和对BPA损伤抵抗能力的差异,本实验进行了浓度为1 mg/L,1.5 mg/L和2 mg/L的BPA亚慢性暴露实验:通过对暴露后长牡蛎外套膜组织中BPA含量分析发现,白壳与黑壳长牡蛎外套膜中BPA含量均随着暴露浓度的升高而升高,且3种浓度BPA亚慢性暴露后,黑壳长牡蛎外套膜BPA含量均低于白壳长牡蛎,但是差异不显著(P0.05)。采用3种浓度BPA亚慢性暴露后,黑壳长牡蛎外套膜组织中活性氧(ROS)荧光值均显著低于白壳长牡蛎(P0.01)。通过对外套膜组织学观察发现,2 mg/L的高浓度BPA暴露使白壳长牡蛎外套膜组织发生了明显的病理变化,黑壳长牡蛎外套膜未发生明显的病理变化。可见,黑壳长牡蛎对BPA暴露可能具有更强的抵抗能力。 相似文献
16.
采用LS-DYNA软件,对装药半径为0.15m、0.42m、0.55m的战斗部有、无壳体的爆炸特性进行数值模拟研究,分析了炸药在有无壳体的水下爆炸时的冲击波压力、气泡脉动压力等特性参数,对比总结了不同当量、不同装药半径及有无壳体的数值计算结果。结果表明:壳体对水下爆炸气泡脉动的影响是较为显著的。壳体厚度对气泡形成时间没有太多影响,但对气泡压力峰值影响较大。因此,研究战斗部水下爆炸威力时必须考虑壳体因素,不能简化。 相似文献
17.
本文研究了舟山沿岸四种藤壶（三角藤壶Ｂａｌａｎｕｓｔｒｉｇｏｎｕｓ，纹藤壶Ｂ．ａｍｐｈｉｔｒｉｔｅａｍｇｈｉｔｒｉｔｅ，白脊藤壶Ｂ．ａｌｂｉｃｏｓｔａｔｕｓ及日本笠藤壶Ｔｅｔｒａｃｌｉｔａｊａｐｏｎｉｃａ）壳板的亚显微结构。结果表明，壳板表面的亚显微结构主要有生长脊（包括毛脊、大脊、微脊）和放射脊。其中，大脊和放射脊系本文首次报道。大脊于蔡壶蜕皮后毛脊（刚毛）形成的同时或其后形成，与蜕度周期有关。放射脊的形成可增加壳板的坚固度。各种生长脊的数量及强弱变化反映了藤壶的生理代谢状况及环境对藤壶成长的影响。本文比较了四种藤壶之间壳板表面的亚显微结构，发现它们有很大的差异。通过比较四种藤壶成体和幼体之间壳板表面的亚显微结构，发现藤壶壳板表面结构与年龄有密切关系，尤以生活于潮间带中上区的白脊藤壶和日本笠藤壶为显著。环境，尤其是潮区，对藤壶壳板的生长有很大影响。日本笠藤壶、白脊藤壶、纹藤壶壳板结构明显受其生活的潮区影响。 相似文献
18.
19.
贝类种群壳形态性状多态性研究进展 总被引：1，自引：1，他引：0
贝类壳形态具有丰富、复杂的多态性。壳形态作为贝类重要的数量性状是一种环境适应的进化,是不同生理功能适应其生活方式的结果,受环境和遗传因素影响,与贝类的生长、存活、代谢及繁殖等生态、生理行为密切相关。通过贝类可量可数性状建立的壳形态数值分类学方法已在贝类种群形态学比较及群体亲缘关系研究中广泛应用。本文对贝类种群壳形态性状的多态性研究进行了综述,并对壳形态分析方法在贝类种质资源评估（种群识别）及遗传育种（壳宽型/深凹型品系选育）中的应用提出展望,旨在为研究者较全面了解壳形态性状的多态性和分析方法提供参考。 相似文献
20.
青蛤(Cyclina sinensis)贝壳形态性状对软体部重的影响分析 总被引：2，自引：0，他引：2
随机抽取中国及日本海域的1龄青蛤(Cyclina shiensis)245个,分别测量其壳高、壳长、壳宽、韧带长、壳重及软体部重等形态学和生产性状,采用相关分析、通径分析、决定系数分析和多元回归分析方法,讨论了贝壳各形态性状对软体部重的影响.结果表明,青蛤的壳高对软体部重相关系数r1y和直接影响通径系数Pi分别达到了0.953和0.938,统计检验均达到了极显著水平(P<0.01).此外,壳高对软体部重的决定系数R12为0.9080,多元回归分析亦显示出青蛤的壳高与软体部重具有显著的相关性(P<0.01).实验结论认为,壳高对青蛤的生产性状影响最大,可以作为青蛤种质选育的重要甄别性状. 相似文献