共查询到20条相似文献，搜索用时 62 毫秒
1.
Scattered ground roll is a type of noise observed in land seismic data that can be particularly difficult to suppress. Typically, this type of noise cannot be removed using conventional velocity‐based filters. In this paper, we discuss a model‐driven form of seismic interferometry that allows suppression of scattered ground‐roll noise in land seismic data. The conventional cross‐correlate and stack interferometry approach results in scattered noise estimates between two receiver locations (i.e. as if one of the receivers had been replaced by a source). For noise suppression, this requires that each source we wish to attenuate the noise from is co‐located with a receiver. The model‐driven form differs, as the use of a simple model in place of one of the inputs for interferometry allows the scattered noise estimate to be made between a source and a receiver. This allows the method to be more flexible, as co‐location of sources and receivers is not required, and the method can be applied to data sets with a variety of different acquisition geometries. A simple plane‐wave model is used, allowing the method to remain relatively data driven, with weighting factors for the plane waves determined using a least‐squares solution. Using a number of both synthetic and real two‐dimensional (2D) and three‐dimensional (3D) land seismic data sets, we show that this model‐driven approach provides effective results, allowing suppression of scattered ground‐roll noise without having an adverse effect on the underlying signal. 相似文献
2.
奇异谱分析是一种近年兴起的时间序列分析方法,它利用降秩原理实现信号分离.该方法将数据空间投影到不同特征的子空间中,并用奇异值来表征这些子空间的性质,最后通过截取奇异值实现数据的重构.重磁位场分离可以看成一种多信号叠加的分离问题.不同特征的重磁异常具有不同特征的奇异谱,这是奇异谱分析用于解决位场分离问题的应用基础.本文通过建立理论模型,分析重磁异常的奇异谱特征,得出适用于重磁位场分离的最优参数选择方法,并与传统方法进行比较.对比发现,无论是横向叠加模型、垂向叠加模型还是斜向叠加模型,奇异谱分析都具有很好的分离效果.最后,将奇异谱分析用于鄂东南某矿区的重力资料处理中,实现弱异常的识别和分离. 相似文献
3.
Woodon Jeong Constantinos Tsingas Mohammed S. Almubarak 《Geophysical Prospecting》2020,68(6):1742-1757
We propose a workflow of deblending methodology comprised of rank-reduction filtering followed by a signal enhancing process. This methodology can be used to preserve coherent subsurface reflections and at the same time to remove incoherent and interference noise. In pseudo-deblended data, the blending noise exhibits coherent events, whereas in any other data domain (i.e. common receiver, common midpoint and common offset), it appears incoherent and is regarded as an outlier. In order to perform signal deblending, a robust implementation of rank-reduction filtering is employed to eliminate the blending noise and is referred to as a joint sparse and low-rank approximation. Deblending via rank-reduction filtering gives a reasonable result with a sufficient signal-to-noise ratio. However, for land data acquired using unconstrained simultaneous shooting, rank-reduction–based deblending applications alone do not completely attenuate the interference noise. A considerable amount of signal leakage is observed in the residual component, which can affect further data processing and analyses. In this study, we propose a deblending workflow via a rank-reduction filter followed by post-processing steps comprising a nonlinear masking filter and a local orthogonalization weight application. Although each application shows a few footprints of leaked signal energy, the proposed combined workflow restores the signal energy from the residual component achieving significantly signal-to-noise ratio enhancement. These hierarchical schemes are applied on land simultaneous shooting acquisition data sets and produced cleaner and reliable deblended data ready for further data processing. 相似文献
4.
Jing Liu Youcai Tang Kai Tao Chunquan Yu Jie Chen Jieyuan Ning Yongshun John Chen Yongge Feng 《地震科学（英文版）》2010,23(6):627-636
We have developed a new stacking technique in ambient noise tomography to obtain high-quality dispersion curves of Rayleigh waves.This technique is used to stack the vertical components of the Estimated Green Functions(EGFs) obtained respectively from cross correlation of the ambient noise data recorded by a remote seismic station and one of the short distance seismic stations of a seismic array.It is based on a phase-matched filter and is implemented by a four-step iterative process:signal compression,stacking,signal extraction and signal decompression.The iterative process ends and gives the dispersion curve of Rayleigh wave when the predicted one and the processing result converge.We have tested the method using the vertical components of synthetic Rayleigh wave records.Results show that this new stacking method is stable and it can improve the quality of dispersion curves.In addition,we have applied this method to real data.We see that the results given by our new technique are obviously better than the ones employing the traditional method which is a three-step process:signal compression,signal extraction and signal decompression.In conclusion,the new method proposed in this paper can improve the signal to noise ratio of EGFs,and can therefore potentially improve the resolution of ambient noise tomography. 相似文献
5.
地球物理信号中普遍含有噪声，消除噪声是地球物理信号处理中的关键技术之一.奇异功率谱分析（SSA）是在状态空间（又称相空间）中研究（系统）动力学、非线性科学与混沌现象的方法.本文在状态空间中通过SSA分解，研究、应用地球物理序列的尺度不变性进行多维分形滤波：通过在状态空间的SSA分解，构造了经验正交函数系（EOF）；在EOF子空间中定义了两种尺度与测度后，发现了两种测度与尺度皆在多个尺度范围内存在尺度不变性；利用这种尺度~测度的尺度不变性，设计、实现了多维分形奇异功率谱(MSSA)滤波模型；处理解释了大洋钻探（ODP）1143A孔岩芯自然反射性（NGR）资料；Fourier功率谱分析结果证明，MSSA能有效地压制噪声，提取有用信号.研究得出，嵌入维数对MSSA基本无影响（小于1/1000），多维分形滤波器（MSSA）能有效压制噪声或提取有用信号. 相似文献
6.
C.A.F. Marques J.A. Ferreira A. Rocha J.M. Castanheira P. Melo-Gonçalves N. Vaz J.M. Dias 《Physics and Chemistry of the Earth》2006,31(18):1172-1179
The singular spectrum analysis (SSA) technique is applied to some hydrological univariate time series to assess its ability to uncover important information from those series, and also its forecast skill. The SSA is carried out on annual precipitation, monthly runoff, and hourly water temperature time series. Information is obtained by extracting important components or, when possible, the whole signal from the time series. The extracted components are then subject to forecast by the SSA algorithm. It is illustrated the SSA ability to extract a slowly varying component (i.e. the trend) from the precipitation time series, the trend and oscillatory components from the runoff time series, and the whole signal from the water temperature time series. The SSA was also able to accurately forecast the extracted components of these time series. 相似文献
7.
随钻地震(SWD)的波场十分复杂,对钻头有效信号和地表机械干扰成分的分析是SWD重要的资料预处理步骤.本文利用有效信号和噪声带有周期性或时延差异等时间结构特征,引入相关域小波变换进行SWD信号检测和分析.有效信号在钻柱内往复多次传播,因而带有严格的周期性,泥浆泵等机械发出的噪声也是周期性的,这些成分在自相关域内可以得到很好的凸显.SWD波场的各种成分,由于到达各个接收道的时延不同,在互相关域的特定时延处也能够得到凸显.利用小波变换对这些在相关域内得到凸显的成分进行多分辨分析,能够获得优势频率范围、周期、衰减等主要特征.根据这些信息,设计出合理的SWD处理方法,初步得到了有效信号的直达波.数据试处理结果表明,相关域小波变换是随钻地震的一个有效的预处理方法. 相似文献
8.
本文从信号与系统的角度讨论了同步大地电磁时间序列信号之间的依赖关系,选取高信噪比的时间序列信号作为先验数据,用最小二乘法估算依赖关系;结合参考道的数据,合成本地道含噪声时段的数据,最后用合成数据替代噪声段数据,组成新数据,从而在时域中去除大地电磁噪声.西藏地区高信噪比实测数据的试算结果表明,无论电场还是磁场,信号之间的依赖关系是相对稳定的,只与先验数据的长度有关,与时间无关;虽然不同参考点之间的依赖关系不同,但都可以精确合成本地点数据,与参考点地下电性结构和参考距离无关.仿真实验显示,去噪后的信号与原始信号基本一致.实测数据处理结果表明,该方法可以有效去除强噪声干扰,抑制中高频段的近场源效应,同时保留了微弱的有效信号,保证了处理结果的正确性.最后针对方差比方法无法识别的方波噪声,提出了一种简单的平移方法,成功去除了持续时间大于窗口长度的方波噪声;将该方法与远参考技术结合,可以有效抑制近场源噪声干扰,获得光滑连续并且可信的测深资料. 相似文献
9.
The prospecting of densely urbanized areas by the measurement of magnetic and electric natural fields is severely hampered by electromagnetic (EM) noise. Active man-made EM noise sources can generally be considered fixed in space, thus affecting the magnetotelluric (MT) signals of a measuring site mainly along their polarization directions. Taking advantage of the impulsive nature of polarized EM noise, a time-domain directional noise cancelling (DNC) technique is proposed. The comparison of noisy data with data predicted, using a low noise reference signal or with data interpolated whenever no reference is available, allows the detection of the most likely noise sources with prevailing directional patterns using a Bayes's criterion. The DNC approach is general and can be adapted, depending on the reference signal used (single-site or remote-reference). In field data, hodograms of the prediction residuals basically confirm the directional noise model assumed in DNC. An example is presented in which the DNC technique has been applied to a single-site MT survey carried out in northern Italy, where the signal was heavily corrupted by noise with prevailing directional properties due to the densely urbanized area. MT apparent resistivities and phases obtained at the site of the survey before and after DNC are presented and discussed. 相似文献
10.
Sean E. Walker Leonard R. Pasion Douglas W. Oldenburg Stephen D. Billings 《Journal of Applied Geophysics》2007,61(3-4):254-278
Using field data and numerical simulations we investigate the effect of data quality on time domain electromagnetic discrimination. Data quality decreases when measurements contain responses not accounted for by our mathematical modelling. This can include instrument noise, inaccurately reported position and orientation information, geologic contributions to the signal, and loss of validity of the forward modelling. Survey design is critical to data quality in order to have sufficient sampling of data anomalies, and also to ensure that each target is illuminated such that both the axial and transverse components of the polarization can be excited and measured. For dipole model based discrimination algorithms, success is contingent upon the accuracy with which the components of the polarization tensor can be estimated. Field data from different survey modes are analysed to identify noise sources and provide quantitative estimates of the noise in each survey. Inversion results show that increased noise levels lead to greater spread in recovered parameters. Monte Carlo simulations are performed in order to investigate the importance of other data quality factors. Analysis of inversion results from the simulations show that anomaly size, signal to noise ratio, positioning error, line spacing and station spacing all play a role in the spread of recovered parameters. Through the analysis of our simulation results we propose a figure of merit as a means of quantifying different data quality factors with a single number and relate this number to the accuracy with which parameters can be estimated. 相似文献
11.
为压制大地电磁信号中的强人文干扰,提出一种基于压缩感知重构算法的大地电磁信号去噪方法.通过构建与常见典型强干扰相匹配而对有用信号不敏感的冗余字典原子,利用改进的正交匹配追踪算法,分离出大地电磁信号中的强干扰成分.为了验证所述方法的强干扰分离效果,首先通过在实测大地电磁信号中加入理想的强干扰信号进行了仿真分离实验,然后从大量实测数据中选取三种含有不同类型强干扰的时间域片段,用所述方法对实测数据中的强干扰进行分离,最后将所述方法应用于青海试验点以及庐枞矿集区某测点实测数据的综合处理.仿真实验结果表明,该方法在分离出强干扰的同时,能够较好地保留有用信号.实测数据处理结果表明,该方法能够有效压制强干扰,改善强干扰区大地电磁数据的质量. 相似文献
12.
Comparative study of monthly inflow prediction methods for the Three Gorges Reservoir 总被引：3，自引：1，他引：2
Yun Wang Shenglian Guo Hua Chen Yanlai Zhou 《Stochastic Environmental Research and Risk Assessment (SERRA)》2014,28(3):555-570
Due to the complexity of influencing factors and the limitation of existing scientific knowledge, current monthly inflow prediction accuracy is unable to meet the requirements of various water users yet. A flow time series is usually considered as a combination of quasi-periodic signals contaminated by noise, so prediction accuracy can be improved by data preprocess. Singular spectrum analysis (SSA), as an efficient preprocessing method, is used to decompose the original inflow series into filtered series and noises. Current application of SSA only selects filtered series as model input without considering noises. This paper attempts to prove that noise may contain hydrological information and it cannot be ignored, a new method that considerers both filtered and noises series is proposed. Support vector machine (SVM), genetic programming (GP), and seasonal autoregressive (SAR) are chosen as the prediction models. Four criteria are selected to evaluate the prediction model performance: Nash–Sutcliffe efficiency, Water Balance efficiency, relative error of annual average maximum (REmax) monthly flow and relative error of annual average minimum (REmin) monthly flow. The monthly inflow data of Three Gorges Reservoir is analyzed as a case study. Main results are as following: (1) coupling with the SSA, the performance of the SVM and GP models experience a significant increase in predicting the inflow series. However, there is no significant positive change in the performance of SAR (1) models. (2) After considering noises, both modified SSA-SVM and modified SSA-GP models perform better than SSA-SVM and SSA-GP models. Results of this study indicated that the data preprocess method SSA can significantly improve prediction precision of SVM and GP models, and also proved that noises series still contains some information and has an important influence on model performance. 相似文献
13.
First-break picking of microseismic data is a significant step in microseismic monitoring. There is a great error in conventional first-break picking methods based on time domain analysis in low signal to noise ratio. S-transform may provide a novel approach, it can extract the time–frequency features of the signal and reduce the picking error because of its high time–frequency resolution and good time–frequency clustering; however, the S-transform is not well suited for microseismic data with high noise. For applications to array data where the weak signal has spatial coherency as well as some distinct temporal characteristics, we propose to combine the shearlet transform with a time–frequency transform. In the proposed method, the shearlet transform is used to capture spatial coherency features of the signal. The information of the signal and noise in shearlet domain is represented by shearlet coefficients. We use the correlation of signal coefficients at adjacent fine scales to give prominence to signal features to accurately discriminate the signal from noise. The prominent signal coefficients make the signal better gathered in time–frequency spectrum of the S-transform. Finally, we can get reliable and accurate first breaks based on the change of energy. The performance of the proposed method was tested on synthetic and field microseismic data. The experimental results indicated that our method is outstanding in terms of both picking precision and adaptability to noise. 相似文献
14.
Yih Jeng Chun-Hung Lin Yi-Wei Li Chih-Sung Chen Hung-Ming Yu 《Journal of Applied Geophysics》2011,73(3):251-260
Fourier-based algorithms originally developed for the processing of seismic data are applied routinely in the Ground-penetrating radar (GPR) data processing, but these conventional methods of data processing may result in an abundance of spurious harmonics without any geological meaning. We propose a new approach in this study based essentially on multiresolution wavelet analysis (MRA) for GPR noise suppression. The 2D GPR section is similar to an image in all aspects if we consider each data point of the GPR section to be an image pixel in general. This technique is an image analysis with sub-image decomposition. We start from the basic image decomposition procedure using conventional MRA approach and establish the filter bank accordingly. With reasonable knowledge of data and noise and the basic assumption of the target, it is possible to determine the components with high S/N ratio and eliminate noisy components. The MRA procedure is performed further for the components containing both signal and noise. We treated the selected component as an original image and applied the MRA procedure again to that single component with a mother wavelet of higher resolution. This recursive procedure with finer input allows us to extract features or noise events from GPR data more effectively than conventional process.To assess the performance of the MRA filtering method, we first test this method on a simple synthetic model and then on experimental data acquired from a control site using 400 MHz GPR system. A comparison of results from our method and from conventional filtering techniques demonstrates the effectiveness of the sub-image MRA method, particularly in removing ringing noise and scattering events. Field study was carried out in a trenched fault zone where a faulting structure was present at shallow depths ready for understanding the feasibility of improving the data S/N ratio by applying the sub-image multiresolution analysis. In contrast to the conventional methods, the MRA sub-image filtering technique provides an overall improvement in image quality of the data as shown in the field study. 相似文献
15.
Three‐dimensional seismic survey design should provide an acquisition geometry that enables imaging and amplitude‐versus‐offset applications of target reflectors with sufficient data quality under given economical and operational constraints. However, in land or shallow‐water environments, surface waves are often dominant in the seismic data. The effectiveness of surface‐wave separation or attenuation significantly affects the quality of the final result. Therefore, the need for surface‐wave attenuation imposes additional constraints on the acquisition geometry. Recently, we have proposed a method for surface‐wave attenuation that can better deal with aliased seismic data than classic methods such as slowness/velocity‐based filtering. Here, we investigate how surface‐wave attenuation affects the selection of survey parameters and the resulting data quality. To quantify the latter, we introduce a measure that represents the estimated signal‐to‐noise ratio between the desired subsurface signal and the surface waves that are deemed to be noise. In a case study, we applied surface‐wave attenuation and signal‐to‐noise ratio estimation to several data sets with different survey parameters. The spatial sampling intervals of the basic subset are the survey parameters that affect the performance of surface‐wave attenuation methods the most. Finer spatial sampling will reduce aliasing and make surface‐wave attenuation easier, resulting in better data quality until no further improvement is obtained. We observed this behaviour as a main trend that levels off at increasingly denser sampling. With our method, this trend curve lies at a considerably higher signal‐to‐noise ratio than with a classic filtering method. This means that we can obtain a much better data quality for given survey effort or the same data quality as with a conventional method at a lower cost. 相似文献
16.
Woodon Jeong Constantinos Tsingas Mohammed S. Almubarak 《Geophysical Prospecting》2020,68(5):1523-1539
A number of deblending methods and workflows have been reported in the past decades to eliminate the source interference noise recorded during a simultaneous shooting acquisition. It is common that denoising algorithms focusing on optimizing coherency and weighting down/ignoring outliers can be considered as deblending tools. Such algorithms are not only enforcing coherency but also handling outliers either explicitly or implicitly. In this paper, we present a novel approach based on detecting amplitude outliers and its application on deblending based on a local outlier factor that assigns an outlier-ness (i.e. a degree of being an outlier) to each sample of the data. A local outlier factor algorithm quantifies outlier-ness for an object in a data set based on the degree of isolation compared with its locally neighbouring objects. Assuming that the seismic pre-stack data acquired by simultaneous shooting are composed of a set of non-outliers and outliers, the local outlier factor algorithm evaluates the outlier-ness of each object. Therefore, we can separate the data set into blending noise (i.e. outlier) and signal (i.e. non-outlier) components. By applying a proper threshold, objects having high local outlier factors are labelled as outlier/blending noise, and the corresponding data sample could be replaced by zero or a statistically adequate value. Beginning with an explanation of parameter definitions and properties of local outlier factor, we investigate the feasibility of a local outlier factor application on seismic deblending by analysing the parameters of local outlier factor and suggesting specific deblending strategies. Field data examples recorded during simultaneous shooting acquisition show that the local outlier factor algorithm combined with a thresholding can detect and attenuate blending noise. Although the local outlier factor application on deblending shows a few shortcomings, it is consequently noted that the local outlier factor application in this paper obviously achieves benefits in terms of detecting and attenuating blending noise and paves the way for further geophysical applications. 相似文献
17.
基于非稳态多项式拟合的地震噪声衰减方法研究(英文) 总被引：1，自引：0，他引：1
基于非稳态多项式拟合理论,针对地震数据中同相轴振幅变化这一特征,我们提出了一种地震噪声衰减的新方法。非稳态多项式拟合系数是时变的,通过整形正则化约束多项式拟和系数的光滑性,自适应的估计地震数据的相干分量。基于动校正后的共中心点道集(CMP)中地震信号的相干性,利用非稳态多项式拟合估计有效信号,从而衰减随机噪声。对于线性相干噪声,如地滚波,首先利用径向道变换(RadialTraceTransform,RTT)将地震数据变换到时间一视速度域,在时间—视速度域利用非稳态多项式拟合估计出相干噪声,然后减去相干噪声。该方法可以有效的估计振幅变化的相干分量,不需要相干分量振幅为常量的假设。模拟和实际资料处理结果表明,与传统的稳态多项式拟合和低切滤波相比,该方法可以更为有效的衰减地震噪声,同时保真了地震有效信号。 相似文献
18.
19.
针对地震勘探随机噪声的压制,本文应用拉伸厄米特高斯函数设计出方向可控滤波器.根据时空域上随机噪声的无方向性与有效信号的有向性的区别,通过局部数字特征,对数据进行选择后重组信号.方向选择性的增加,使得滤波过程能与不同方向的轴进行匹配,噪声被压制的同时保持信号的幅度;方向可调性,使得计算效率提高,且所需存储空间减少.仿真实验表明,采用此方法,信号保幅性和去噪效果均比传统的小波算法以及Curvelet变换好,在-5db信噪比下,本文方法保幅度为92.99%,信噪比提升221.774%,在实际地震信号处理中有明显的抑制噪声、保持有用信号的效果. 相似文献
20.
地震数据本质上是时变的,不仅有效同相轴表现出确定性信号的时变特征,而且复杂地表和构造条件以及深部探测环境总是引入时变的非平稳随机噪声.标准的频率-空间域预测滤波只适合压制平面波信号假设下的平稳随机噪声,而处理非平稳地震随机噪声时,需要将数据体分割为小窗口进行分析,但效果不够理想,而传统非预测类随机噪声压制方法往往适应性不高,因此开发能够保护地震信号时变特征的随机噪声压制方法具有重要的工业价值.压缩感知是近年出现的一个新的采样理论,通过开发信号的稀疏特性,已经在地震数据处理中的数据插值以及噪声压制中得到了应用.本文系统地分析了压缩感知理论框架下的地震随机噪声压制问题,建立了阈值消噪的数学反演目标函数;针对时变有效信息具有的可压缩性,利用有限差分算法求解炮检距连续方程,构建有限差分炮检距连续预测算子(FDOC),在seislet变换框架下,提出一种新的快速稀疏变换域———FDOC-seislet变换,实现地震数据的高度稀疏表征;结合非平稳随机噪声不可压缩的特征,提出了一种整形迭代消噪方法,该方法是一种广义的迭代收缩阈值(IST)算法,在无法计算稀疏变换伴随算子的条件下,仍然能够对强噪声环境中的时变有效信息进行有效恢复.通过对模型数据和实际数据的处理,验证了FDOC-seislet稀疏变换域随机噪声迭代压制方法能够在保护复杂构造地震波信息的前提下,有效地衰减原始数据中的强振幅随机噪声干扰. 相似文献