Use of Sonication for Enhanced Sampling of Attached Microbes from Groundwater Systems     

Murray Close  Phil Abraham  Judith Webber  Eliza Cowey  Bronwyn Humphries  Graham Fenwick  Simon Howard  Kimberly Huynh  Travis Grace  Pierre-Yves Dupont  Louise Weaver 《Ground water》2020,58(6):901-912

The vast majority of microorganisms in aquifers live as biofilms on sediment surfaces, which presents significant challenges for sampling as only the suspended microbes will be sampled through normal pumping. The use of a down-well low frequency sonicator has been suggested as a method of detaching microbes from the biofilm and allowing rapid sampling of this community. We developed a portable, easy to use, low-frequency electric sonicator and evaluated its performance for a range of well depths (tested up to 42 m below ground level) and casing types. Three sonicators were characterized in laboratory experiments using a 1 m long tank filled with pea gravel. These included a commercially available pneumatic sonicator, a rotating flexible shaft sonicator, and the prototype electric sonicator. The electric sonicator detached between 56 and 74% of microbes grown on gravel-containing biobags at distances ranging between 2 and 50 cm from the sonicator. The field testing comprises of a total of 55 sampling events from 48 wells located in 4 regions throughout New Zealand. Pre- and post-sonication samples showed an average 33 times increase in bacterial counts. Microbial sequence data showed that the same classes are present in pre- and post-sonicated samples and only slight differences were seen in the proportions present. The sampling process was rapid and the significant increases in bacterial counts mean that microbial samples can be quickly obtained from wells, which permits more detailed analysis than previously possible.  相似文献   

LA‐ICP‐MS Pb isotope test of meteorite provenance: A terrestrial origin for Lovina     

Christopher R. J. Charles  Phil J. A. McCausland  Donald W. Davis 《Meteoritics & planetary science》2020,55(5):1093-1102

Lovina, classified as an ungrouped ataxite, is controversial and its identity as a meteorite has been questioned. In this work, we use Pb isotopes on targeted troilite nodules in Lovina as a test of its antiquity and provenance. Although precise ages cannot be obtained, LA‐ICP‐MS offers a rapid, straightforward procedure to establish the source of lead, whether ancient (meteoritic) or modern (terrestrial). For nine pristine, unweathered nodules in Lovina, we find a lead isotopic composition of: ²⁰⁶Pb/²⁰⁸Pb = 0.492 ± 0.003 (2σ, MSWD 0.79; 95%) and ²⁰⁷Pb/²⁰⁶Pb = 0.852 ± 0.003 (2σ, MSWD 1.09; 95%) with no detectable uranium. All lead compositions of the troilite fall in the range expected for modern environmental and mantle lead and are distinctly different from the primordial Canyon Diablo Troilite (CDT) composition of ancient meteoritic troilite. Although the origin of Lovina remains unknown, we conclude that lead in the Lovina troilite is unsupported by U decay and originated from a terrestrial source.  相似文献   

Natural resources and environmental justice: Australian perspectives     

Phil McManus 《The Australian geographer》2019,50(1):131-132

  相似文献   

Shapes of chondrules determined from the petrofabric of the CR2 chondrite NWA 801          下载免费PDF全文

Christopher R. J. Charles  Pierre-Yves F. Robin  Donald W. Davis  Phil J. A. McCausland 《Meteoritics & planetary science》2018,53(5):935-951

The approximately spherical shapes of chondrules has long been attributed to surface tension acting on ~1 mm melt droplets that formed and cooled in the microgravity field of the solar nebula. However, chondrule shapes commonly depart significantly from spherical. In this study, 109 chondrules in a sample of CR2 chondrite NWA 801 were imaged by X-ray computed tomography and best-fitted to ellipsoids. The analysis confirms that many chondrules are indeed not spherical, and also that the chondrules’ collective shape fabric records a definite 13% compaction in the host meteorite. Dehydration of phyllosilicates within chondrules may account for that strain. However, retro-deforming all chondrules shows that a large majority were already far from spherical prior to accretion. Possible models for these initial shapes include prior deformation of individual chondrules in earlier hosts, and, as suggested by previous authors, rotation of chondrules as they were solidifying, and/or “streaming” of molten chondrules by their differential velocities with their gaseous hosts after melting. More in situ 3-D work such as this study on a variety of unequilibrated chondrites, combined with detailed structural petrography, should help further constrain these models and refine our understanding of chondrite formation.  相似文献   

Estimating urban above ground biomass with multi-scale LiDAR     

Phil Wilkes  Mathias Disney  Matheus Boni Vicari  Kim Calders  Andrew Burt 《Carbon balance and management》2018,13(1):10

  相似文献   

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy          下载免费PDF全文

Luke Daly  Phil A. Bland  Svetlana Tessalina  David W. Saxey  Steven M. Reddy  Denis Fougerouse  William D.A. Rickard  Lucy V. Forman  Alexandre La Fontaine  Julie M. Cairney  Simon P. Ringer  Bruce F. Schaefer  Daniel Schwander 《Geostandards and Geoanalytical Research》2018,42(3):279-299

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.  相似文献   

Shocked quartz in polymict impact breccia from the Upper Cretaceous Yallalie impact structure in Western Australia     

Morgan A. Cox  Aaron J. Cavosie  Ludovic Ferrire  Nicholas E. Timms  Phil A. Bland  Katarina Miljkovi&#x;  Timmons M. Erickson  Brian Hess 《Meteoritics & planetary science》2019,54(3):621-637

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia.  相似文献   

A multi‐proxy record of changing environments from ca. 30 000 to 9000 cal. a BP: Onepoto maar palaeolake,Auckland, New Zealand     

Paul Augustinus  Donna D'costa  Yanbin Deng  Joseph Hagg  Phil Shane 《第四纪科学杂志》2011,26(4):389-401

We present a high‐resolution record of lacustrine sedimentation spanning ca. 30 000 to 9000 cal. a BP from Onepoto maar, northern North Island, New Zealand. The multi‐proxy record of environmental change is constrained by tephrochronology and accelerator mass spectrometric ¹⁴C ages and provides evidence for episodes of rapid environmental change during the Last Glacial Coldest Period (LGCP) and Last Glacial–Interglacial Transition (LGIT) from northern New Zealand. The multi‐proxy palaeoenvironmental record from Onepoto indicates that the LGCP was cold, dry and windy in the Auckland region, with vegetation dominated by herb and grass in a beech forest mosaic between ca. 28 500 and 18 000 cal. a BP. The LGCP was accompanied by more frequent fires and influx of clastic sediment indicating increased erosion during the LGCP, with a mid‐LGCP interstadial identified between ca. 25 000 and 23 000 cal. a BP. Rapid climate amelioration at ca. 18 000 cal. a BP was accompanied by increased terrestrial biomass exemplified by the expansion of lowland podocarp forest, especially Dacrydium cupressinum. Increasing biomass production is reversed briefly by LGIT perturbations which are apparent in many of the proxies that span ca. 14 000–10 500 cal. a BP, suggesting generally increased wetness and higher in situ aquatic plant productivity with reduced terrestrial organic matter and terrigenous detrital influx. Furthermore, conditions at that time were probably warmer and frosts rare based on the increasing importance of Ascarina. The subsequent early Holocene is characterised by podocarp conifer forest and moist mild conditions. Postglacial sea‐level rise breached the crater rim and deposited 36 m of estuarine mud after ca. 9000 cal. a BP. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Late Quaternary tephra layers around Raoul and Macauley Islands,Kermadec Arc: implications for volcanic sources,explosive volcanism and tephrochronology     

Phil Shane  Ian C. Wright 《第四纪科学杂志》2011,26(4):422-432

A suite of deep‐sea cores were collected along transects up to 100 km across the fore‐arc and back‐arc regions of the predominantly submarine Kermadec arc near Raoul and Macauley islands, southwest Pacific. The cores reveal a macroscopic tephra record extending back >50 ka. This is a significant addition to the dated record of volcanism, previously restricted to fragmented late Holocene records exposed on the two islands. The 27 macroscopic tephra layers display a wide compositional diversity in glass (～50–78 wt% SiO₂). Many tephra layers comprise silicic shards with a subordinate mafic shard population. This could arise from magma mingling and may reflect mafic triggering of the silicic eruptions. Broadly, the glass compositions can be distinguished on diverging high‐K and low‐K trends, most likely arising from different source volcanoes. This distinction is also reflected in the tephra records exposed on Raoul (low‐K) and Macauley (high‐K) islands, the likely source areas. Heterogeneous tephra comprising shards of both high‐ and low‐K affinity, silicic and mafic compositions, and more homogeneous tephra with subordinate outlier shard compositions, are best explained by post‐depositional mixing of separate eruption deposits or contemporaneous eruptions. Evidently, the slow sedimentation rates of the calcareous oozes (～10¹–10² mm ka^?1) were insufficient to adequately separate and preserve closely spaced eruption deposits. This exemplifies the difficulty in assessing eruption frequencies and magmatic trends, and erecting a tephrostratigraphy, using geochemical fingerprinting in such environments. Despite these difficulties, the ca. 5.7 ka Sandy Bay Tephra erupted from Macauley Island can be correlated over a distance of >100 km, extending east and west of the island, showing that the mostly submerged volcanoes are capable of wide tephra dispersal. Hence there is potential for developing chronostratigraphies for the southwest Pacific beyond the region covered by the extensive rhyolite marker beds from the Taupo Volcanic Zone. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

An analytical description of three-dimensional heliocentric solar sail orbits     

Brian Stewart  Phil Palmer  Mark Roberts 《Celestial Mechanics and Dynamical Astronomy》2017,128(1):61-74

  相似文献