共查询到20条相似文献，搜索用时 15 毫秒
1.
超短基线定位解算中的距离观测值是指换能器与水下应答器之间的直线距离,而海水声速的不均匀分布导致声波在海水中的实际传播路径为连续弯曲的曲线,需要结合实测声速剖面进行声线修正。根据声速在分层介质中的传播特性,本文提出了一种基于二次多项式拟合的声线跟踪算法,采用线性插值方法对声速剖面数据进行合理加密并按等深度进行分层,设定每层声速梯度是不断变化的,用二次多项式拟合声速,基于运动学原理建立了完整的数学解算模型。仿真结果表明,该方法修正后的水下目标分布具有明显的收敛性,且优于等梯度声线跟踪算法和等效声速剖面法,显著提高了超短基线水声定位系统的定位精度。 相似文献
2.
Optimal localization of a seafloor transponder in shallow water using acoustic ranging and GPS observations 总被引：2，自引：0，他引：2
This study utilized circular and straight-line survey patterns for acoustic ranging to determine the position of a seafloor transponder and mean sound speed of the water column. To reduce the considerable computational burden and eliminate the risk of arriving at a local minimum on least-squares inversion, the position of a seafloor transponder was estimated by utilizing optimization approaches. Based on the implicit function theorem, the Jacobian for this inverse problem was derived to investigate the constraints of employing circular and straight-line survey patterns to estimate the position of a transponder. Both cases, with and without knowledge of the vertical sound speed profile, were considered. A transponder positioning experiment was conducted at sea to collect acoustic and GPS observations. With significant uncertainties inherent in GPS measurements and the use of a commercial acoustic transponder not designed for precise ranging, experimental results indicate that the transponder position can be estimated accurately on the order of decimeters. Moreover, the mean sound speed of the water column estimated by the proposed optimization scheme is in agreement with that derived from conductivity, temperature, and density (CTD) measurements. 相似文献
3.
The accuracy of GPS/Acoustic positioning is crucial for monitoring seafloor crustal deformation. However, the slant range residual is currently the only indicator used to evaluate the precision of positioning seafloor transponders. This study employs a unique Seafloor Acoustic Transponder System (SATS) to evaluate the accuracy of GPS/Acoustic seafloor positioning. The SATS has three transponders and an attitude sensor in a single unit, which provides true lengths of transponder baselines and true attitude of the SATS to ensure assessment reliability and validity. The proposed approach was tested through a GPS/Acoustic experiment, in which an off-the-shelf acoustic system was used to collect range measurements. Using GPS/Acoustic geodetic observations, the positions of three transponders on the SATS were estimated by an optimization technique combined with ray-tracing calculations. The accuracy of the GPS/Acoustic seafloor positioning is assessed by comparing the true baselines and attitude with the results derived from the position estimates of the three transponders. A sensitivity analysis is conducted to investigate the robustness of the GPS/Acoustic positioning results to changes of sound speed. Experimental results demonstrate that the use of the SATS can help to assess the validity of the GPS and acoustic travel time measurements in the GPS/Acoustic seafloor positioning. 相似文献
4.
Traditional Global Navigation Satellite System-Acoustic (GNSS-A) positioning assumes the Layered Model in the sound speed structure, and any of horizontal perturbation of seawater degrades its accuracy. However, the use of the Gradient Model analytically demonstrated that the horizontal gradient of the sound speed structure and displacement can simultaneously be solved using multiple transponders for each of ping. We applied this technique to our observed data and found it unsuitable for real data. We confirmed that a horizontal perturbation with wavelength shorter than the horizontal extent of the transponder array significantly violates the linear approximation in the Gradient Model. Our vertical 2D numerical simulation of internal waves (IWs) forced by tidal oscillation showed that such small-scale IWs could effectively be generated by nonlinear cascade from large-scale IWs of the major tidal constituents. In addition, a small-scale IW in deep water typically has a period of 3–4 h, which degrades positioning accuracy significantly, whereas an IW of much shorter period in shallow water has less effect after removal of the fluctuation by time averaging within a typical observation period. Apparent array position obtained in the synthetic test based on the simulated IW-derived sound speed structure showed features quite similar to that observed in real surveys. To incorporate such deeper perturbation, we proposed a Disturbance Model using dual sea surface platforms, that can solve time-varying perturbation in the vicinity of each transponder.
相似文献5.
The Relationship between Propagation Time and Sound Velocity Profile for Positioning Seafloor Reference Points 总被引：2，自引：0，他引：2
This paper focuses on the relationship between the propagation time and the integral of the sound velocity profile (SVP) with respect to depth (SVP area for short) for positioning seafloor reference points. We proved a linear relationship between the propagation time and the SVP area and defined its mathematical expression (ST law). We showed in three simulations of possible variations in SVPs (random errors, internal waves, or a combination of both) that this ST law is verified. Using this new law in a simulated experiment, the ranging residuals due to sound velocity change through time are significantly improved. With this method, monitoring the SVP while acquiring travel times to a submerged transponder can significantly reduce the positioning errors of the transponder. 相似文献
6.
One goal of seafloor geodesy is to measure horizontal deformation of the seafloor with millimeter resolution. A common technique precisely times an acoustic signal propagating between two points to estimate distance and then repeats the measurement over time. The accuracy of the distance estimate depends upon the travel time resolution, sound speed uncertainty, and the degree to which the path computed from propagation equations replicates the actual path traveled by the signal. In this paper, we address the error from ray propagation equations by comparing three approximations to Snell's Law with ellipsoidal geometry. 相似文献
7.
8.
海洋中声速起伏导致水声信道发生变化,进而引起声线到达结构的变化,对水声传播及定位精度产生一定影响。为讨论这一效应,基于TDOA体制建立了考虑声线弯曲的水下目标无源定位模型,分析了声速起伏对水下声传播路径及传播时间的影响,进而研究了声速起伏对水下无源定位测量精度影响程度。结果表明:当水平传播距离较大时,声速剖面起伏对声传播路径及传播时间的影响更为显著;以典型四元阵为例,若基线长度为20 km,接收阵位于水下5 km处,在不考虑其它随机误差影响下,海洋声速起伏造成的声源定位误差量级在0.5 m以内。分析结果有助于更好地利用环境特征优化无源定位测量方案,可为高精度水下无源定位系统设计及精度评估提供依据。 相似文献
9.
针对多波束测量声速剖面采样间隔合理选取问题,首先介绍了常声速分层声线跟踪法与常梯度分层声线跟踪法基本原理及实现方式,其次基于两种声线跟踪方法分析了声速剖面采样间隔对多波束测深的影响规律,并利用三次样条插值法对声速剖面进行了层化处理以获取不同采样间隔声剖数据,最后结合限差要求,对采样间隔进行了优化选取,实验结果表明,常声速分层声线跟踪法较常梯度分层声线跟踪法对声剖采样间隔更为敏感,在给定限差范围内合理确定采样间隔,既能保证测量的精度又能提高算法运行效率,分析结果对多波束测深数据采集质量的实时监控和实时声线跟踪具有一定指导作用。 相似文献
10.
11.
A new method of positioning underwater static objects is presented based on Global Positioning System (GPS) acoustics. It adopts a model in which the ranging errors follow a quadratic relation with the travel time of acoustic signals. A least squares technique is used to estimate the effective sound speed. The precise location of an object can then be made. The simulation shows that the method is capable of determining the three-dimensional position with an accuracy of 5 cm in a water depth of 500 m. The operating time is respectively 5–10 minutes in 50–100 m depth and 20–30 minutes in 500 m depth. 相似文献
12.
C. Ranz-Guerra 《Geo-Marine Letters》1991,11(3-4):172-173
Mud is a complex mixture of water and solid particles and acoustics can help on its control. The mud layer, as an acoustic
channel, is characterized by its propagation constant relating the wave frequency, the sound velocity, and the energy absorption.
If the input acoustic pulse is known, it is feasible to easily characterize the mud layer as a low pass filter (absorption);
if it is also possible to insonify the mud with sound of both low and high frequencies, the sound speed of the mud mixture
can be evaluated, and the propagation constant is then known. 相似文献
13.
随着我国远海地形测量的日益频繁,进一步提高测量的效率和精度成为研究的热点。利用WOA18数据,对远海地形测量所涉及海域温盐等海洋要素时空分布规律展开预先分析,由此得到该海域声速垂直和水平分布规律,再利用层内常梯度的声线跟踪方法,对相关海域声速剖面获取频次和线性变化开始深度展开定量研究。结果表明,WOA18数据不但能较好优化远海多波束地形测量声速剖面,还能对声速剖面获取的频次和线性变化开始深度做出较好预测,研究结果对提高远海地形测量的精度和效率具有较高价值。 相似文献
14.
GNSS/声纳定位精度主要取决于GNSS浮标阵列构型和测距精度。优化水面GNSS浮标阵列对提高定位精度和可靠性有重要意义。本文提出了基于高度角约束条件的GNSS浮标阵列优化搜索算法。基于GNSS浮标位于海平面和高度角约束条件,本文提出了优化PDOP算法。我们以5个浮标为例对该算法进行了验证,并且获得了完整解。最后,为了在PDOP最小的解中搜索到最优构型,我们提出了一个用来获取最小GDOP解的搜索算法。算法表明：在区域范围内,区域中心点处GDOP最小与区域PDOP均值最小是等价的。我们用中国南海实测数据阐明了5枚浮标情况下定位图形与定位精度的关系。 相似文献
15.
16.
海洋声速剖面严重影响着水下声传播特性,近实时地获取声速剖面对水下声通信、水下定位、鱼群探测等都有重要意义。单经验正交函数回归（single Empirical Orthogonal Function regression,sEOF-r）方法通过建立声速剖面的经验正交系数与海面遥感数据之间的线性回归关系来反演声速剖面。但是,海洋是一个复杂的动力系统,声速与海面遥感数据并不是简单的线性关系,因此,本文基于Argo历史网格数据,通过自组织映射（Self-Organizing Map,SOM）生成海平面高度异常（Sea Level Anomaly,SLA）、海表面温度（Sea Surface Temperature,SST）等海表遥感数据以及表层声速仪测量的表层声速与声速剖面异常之间的非线性映射;然后利用近实时的海表遥感数据和表层声速反演三维海洋声速场。声速剖面反演的结果表明,在多源信息融合的优势下,本文方法的反演性能最稳定且精度最高,声速剖面的平均反演精度比经典sEOF-r方法提高约2 m/s,比未考虑表层声速的经典SOM方法提高约1 m/s。 相似文献
17.
Narumi Takahashi Yasuhisa Ishihara Hiroshi Ochi Tatsuya Fukuda Jun’ichiro Tahara Yosaku Maeda Motoyuki Kido Yusaku Ohta Katsuhiko Mutoh Gosei Hashimoto Satoshi Kogure Yoshiyuki Kaneda 《Marine Geophysical Researches》2014,35(3):243-253
We have developed a new system for real-time observation of tsunamis and crustal deformation using a seafloor pressure sensor, an array of seafloor transponders and a Precise Point Positioning (PPP ) system on a buoy. The seafloor pressure sensor and the PPP system detect tsunamis, and the pressure sensor and the transponder array measure crustal deformation. The system is designed to be capable of detecting tsunami and vertical crustal deformation of ±8 m with a resolution of less than 5 mm. A noteworthy innovation in our system is its resistance to disturbance by strong ocean currents. Seismogenic zones near Japan lie in areas of strong currents like the Kuroshio, which reaches speeds of approximately 5.5 kt (2.8 m/s) around the Nankai Trough. Our techniques include slack mooring and new acoustic transmission methods using double pulses for sending tsunami data. The slack ratio can be specified for the environment of the deployment location. We can adjust slack ratios, rope lengths, anchor weights and buoy sizes to control the ability of the buoy system to maintain freeboard. The measured pressure data is converted to time difference of a double pulse and this simple method is effective to save battery to transmit data. The time difference of the double pulse has error due to move of the buoy and fluctuation of the seawater environment. We set a wire-end station 1,000 m beneath the buoy to minimize the error. The crustal deformation data is measured by acoustic ranging between the buoy and six transponders on the seafloor. All pressure and crustal deformation data are sent to land station in real-time using iridium communication. 相似文献
18.
To observe sound penetration into a sandy sediment, a buried acoustic receiving array was insonified by a wide band sound source carried by a remotely operated vehicle. A slanting array design was used to avoid scattering artifacts. This design overcame possible problems in previous experiments, in which scattering artifacts from the array structure could be mistaken for a propagating wave. The experiments took place in a sandy sediment off the West coast of Florida, as part of the sediment acoustics experiment, which is a multidisciplinary effort to study sediment acoustics. A coherent angle, speed, and height estimation process searched through a four-dimensional search space, of source height and elevation angle, wave speed, and propagation delay to find spherical acoustic wave fronts. Three main categories of waves were found: first refracted, dominant nonrefracted and evanescent. Later acoustic arrivals, a fourth category, remain to be analyzed. Their relative intensities effectively characterize the sediment penetrating acoustic energy. The acoustic sound pressure level of penetrating waves below the critical grazing angle was found to be greater than expected for a flat interface. 相似文献
19.
Lei Sun Xiangmei Meng Guanbao Li Guangming Kan Baohua Liu 《Marine Georesources & Geotechnology》2020,38(5):595-603
AbstractThe high-frequency acoustic properties of seafloor sediments are very significant in seafloor study and underwater acoustic study field. In order to measure the sound speed and the attenuation for the small-scale sediment cores more accurately, this study developed a water coupled acoustic laboratory measurement system based on Richardson-Briggs technique. This method used the correlation comparison of waveforms received in sediment core and in identical reference tubes filled with water to measure sound speed and attenuation. The sound speed and attenuation of a clayey silt sediment sample were measured using the water coupled acoustic laboratory measurement system. This frequency dependence of the sound speed and attenuation showed that the clayey silt sediment has a weak positive sound speed dispersion, while the attenuation increases with a strong positive gradient within the measurement frequency range. This study also noted that the measured sound speed ratio match well with the empirical equations from literature. The measured attenuation factor data can fall in the Hamilton’s empirical prediction range. 相似文献
20.
Absolute positioning of an autonomous underwater vehicle using GPS and acoustic measurements 总被引：2，自引：0，他引：2
Kinematic global positioning system (GPS) positioning and underwater acoustic ranging can combine to locate an autonomous underwater vehicle (AUV) with an accuracy of /spl plusmn/30cm (2-/spl sigma/) in the global International Terrestrial Reference Frame 2000 (ITRF2000). An array of three precision transponders, separated by approximately 700 m, was established on the seafloor in 300-m-deep waters off San Diego. Each transponder's horizontal position was determined with an accuracy of /spl plusmn/8 cm (2-/spl sigma/) by measuring two-way travel times with microsecond resolution between transponders and a shipboard transducer, positioned to /spl plusmn/10 cm (2-/spl sigma/) in ITRF2000 coordinates with GPS, as the ship circled each seafloor unit. Travel times measured from AUV to ship and from AUV to transponders to ship were differenced and combined with AUV depth from a pressure gauge to estimate ITRF2000 positions of the AUV to /spl plusmn/1 m (2-/spl sigma/). Simulations show that /spl plusmn/30 cm (2-/spl sigma/) absolute positioning of the AUV can be realized by replacing the time-difference approach with directly measured two-way travel times between AUV and seafloor transponders. Submeter absolute positioning of underwater vehicles in water depths up to several thousand meters is practical. The limiting factor is knowledge of near-surface sound speed which degrades the precision to which transponders can be located in the ITRF2000 frame. 相似文献