共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
滇西地震重点监视防御区中强地震潜在震源区的综合图像识别 总被引：2，自引：0，他引：2
本文利用滇西地区近些年来的地震地质、地球物理及地壳形变等方面的资料，经深入研究分析，最终选定了１２个较理想的特征参数，通过综合图像识别，在６４个研究对象中得到了２８个Ｄ类对象，占研究区总面积的４３％。其中有１６个对象历史上已有６级以上地震的记载；１２个为新判定的中强地震潜在震源区；１个为判定不稳定对象。最后给出了云南滇西地震重点监视防御区中强地震潜在震源区预测图。 相似文献
3.
4.
Introduction With the model of double couple point source, both orientations of the T, B, and P axes of a single focal mechanism solution and parameters of the two nodal planes may be determined. The focal mechanism solution under ″the model of the best double couple″ can also be given by seis- mic moment tensor, such as those provided by Harvard CMT solutions. The orientations of the T, B, and P axes from one earthquake are associated with the released stress, but they cannot be re- gar… 相似文献
5.
基于震源断层面解的空间取向和断层滑动方向，写出相应力轴张量在地理坐标系中的表达式，进而给出计算平均力轴张量及主值的方法，即通过求解相应的本征方程得到. 对使用多个震源机制解的T，B，P轴参数计算平均应力场的方法，以用滑动方向拟合法反演富蕴、唐山地区平均应力场数据进行验证，二者结果一致. 选择具有地震构造意义的地块或地震带内大量地震的震源机制解研究区域平均应力场. 根据川滇13个地震带（区）的256次中强地震的震源机制解，给出了各带（区）应力张量的定量分析结果. 该方法算法简便，使由大量地震震源机制解资料分析构造应力场的方法走向定量化. 相似文献
6.
7.
8.
云南地区处于印度板块与欧亚板块中国大陆碰撞带的东缘,地壳运动剧烈,活动块体特征明显,中强以上地震频发,是研究大震活动规律的理想场所。通过过去一个世纪的6.7级以上地震活动的时空分布以及地震动力分析认为,云南地区存在的4个具东西交替活动特征的地震活跃期,可能是东、西部各自地震活跃与平静过程叠加的结果,100a左右可能出现1次东、西部同时爆发大震的时段;云南地区地震活动与外围地区存在较好的呼应关系,安达曼-缅甸弧形带的巨震活动对云南地区地震活跃期的启动有一定的指示意义,而云南东部强震也与四川西部大震密切相关,四川大震活动往往滞后于云南地区;中强地震连发—平静—首发大震可能是云南以东部为活动主体的地震活跃期的启动模式。这些认识对云南地区大震预测、地震机理以及板缘动力学研究会有所帮助 相似文献
9.
Analysis of stress state of faults is helpful to understand crustal mechanical properties and seismicity. In the paper, we invert the horizontal crustal stress field in the southeastern Tibetan plateau using focal mechanism solutions of small and medium-size earthquakes, and apply them to estimate the stability of regional major faults.
Firstly, we collect focal mechanism solutions of small and medium-sized earthquakes in the southeastern Tibetan plateau. The dataset includes more than 1 000 focal mechanism solutions in the past twenty years. Magnitudes of these earthquakes vary from M3.0 to M6.0. Most of the focal mechanism solutions were determined using waveform inversion technique. Although most of focal mechanism solutions in the southeastern Tibetan plateau are strike-slip faulting, their spatial pattern is different in sub-regions. Normal faulting earthquakes mainly occurred in the western Sichuan region, reverse faulting earthquakes mainly occurred in the boundary zone between the Tibetan plateau and the South China craton, and strike-slip faulting earthquakes mainly occurred in the central and southern Yunnan region.
Next, we settle on a mesh with grid spacing of 0.5° in longitude and latitude in the region and invert the horizontal crustal stress field at each grid point. Spatial variation of the maximum principal stress axis in the southeastern Tibetan plateau shows a clockwise rotation around the eastern Himalaya syntax. The azimuth of maximum compressional stress axis is about 88.1° in the western Sichuan region, about 124.6° in the South China craton, and about 21.6° in the western and southern Yunnan region. The azimuth of regional maximum compressional stress is nearly parallel to the direction of terrain elevation gradient, and that of the minimum compressional stress is nearly parallel to the tangential direction of the topographic elevation contours. The spatial pattern reflects the control role of gravity spreading of the Tibetan plateau on the regional horizontal stress field.
Finally, we analyzed regional fault stability based on these collected focal mechanism solutions. The fault instability parameter (I) is defined based on the Mohr-Coulomb criterion and indicates the degree of fault approximating to rupture. The instability parameters on fourteen major faults in the southeastern Tibetan plateau were calculated. Our results show that the stability of the Lianfeng-Zhaotong Fault is the lowest before 2014 in the region, which indicates the fault zone is close to rupture at that time. Our results provide a new useful tool to assess regional seismic potential using dense focal mechanism solutions. 相似文献
10.
利用双差定位方法对2018年松原MS5.7地震序列中ML≥1.0地震重新定位,之后使用CAP方法求解松原MS5.7地震序列中强地震的震源机制解,再借助MSATSI软件包反演得到松原地区的区域应力场。综合分析以上研究结果得到如下结论:① 松原MS5.7地震序列发生在NW走向的第二松花江断裂与NE走向的扶余—肇东断裂交会处,将地震精定位结果沿两条断层走向作剖面分析,NW向剖面主轴长度约为5 km,震中分布均匀,NE向剖面主轴长度亦约为5 km,震中呈倾向NE的高倾角分布;② 该序列中的4次ML≥3.7地震的震源机制解具有良好的一致性:节面Ⅰ走向为NE向,节面Ⅱ走向为NW向,均为高倾角走滑断层。中强地震的震源机制节面解与第二松花江断裂性质基本一致,由此推断第二松花江断裂是本次松原地震的发震断层;③ 松原地区的主压应力方位角为N86°E,倾角为7°,主张应力方位角为N24°E,倾角为71°。松原地区的区域应力场既受到大尺度的板块构造运动的控制,又受到区域构造运动的影响。在太平洋板块对北东亚板块向西俯冲作用下,东北地区产生了近EW向的主压应力,受周边地质构造控制,松辽盆地内NE向断裂与NW向断裂交会处易发生走滑型地震,2018年松原MS5.7地震正是在这种构造作用控制下发生的中强地震。 相似文献
11.
利用云南区域数字地震台网46个地震台的记录资料,将2002-2008年间云南区域数字地震台网速报的、震中位于云南省界外300 km以内邻省(国)的中强震速报定位参数,与中国地震台网中心正式速报结果(M≥5.0)(中国地震台网大震速报目录,2002-2007年)及云南地震台网正式速报结果作比较(M＜5.0),总结速报分析... 相似文献
12.
In this paper,we collect 6 361 waveform data to calculate the shear wave splitting parameters from a regionalseismic network of 22 digital stations in Yunnan and its adjacent area from July 1999 to June 2005.By using thecross-correlation method,64 splitting events of 16 stations are processed.We also collect the splitting results ofeight earthquake sequences to present the characteristics of shear wave splitting in Yunnan and its adjacent areas.The orientations of maximum principal compressive stress of three sub-regions in this area are derived from theCMT focal mechanism solutions of 43 moderate-strong earthquakes provided by Harvard University by the P axisazimuth-averaging method.The principal strain rate at each observatory is deduced from the observations ofCrustal Movement Observation Network of China during the period from 1999 to 2004.In addition,the data of Pnaniso-tropy and SKS splitting of Yunnan and its adjacent areas are also collected.We have discovered from thisstudy that the continental lithosphere,as a main seismogenic environment for strong earthquake,can be dividedinto blocks laterally;the mechanical behavior of lithosphere varies with depth and can be divided into differentlayers in the vertical orientation;the information of crustal deformation obtained from GPS might be affected bythe type of blocks,since there are different types of active blocks in Yunnan and its adjacent areas;the shear wavesplitting in this region might be affected mainly by the upper crust or even the surface tectonics. 相似文献
13.
利用云南及邻区遥测台网记录到的6 361条近震数据，采用互相关系数法计算16个台站共64条S波分裂事件，同时收集了8个序列的S波分裂研究结果，初步给出了云南及邻区横波分裂的分布特征；应用哈佛大学给出的43个中强震震源机制解，利用其P轴方位角平均结果，给出了云南及邻区3个主要分区地壳应力场的最大主压应力方位；根据ldquo;中国地壳运动观测网络rdquo;基本网1999——2004年的观测资料，按观测点给出了云南及邻区的主应变率分布；此外，还搜集到云南及邻区的SKS分裂结果和Pn波各向异性资料.通过研究发现: ① 作为强震孕育主体环境的大陆岩石圈在横向上具有明显的分块特点 ② 大陆岩石圈的力学行为随深度而变化，具有明显的分层特性；③云南及邻区所含的各活动地块可能具有不同类型，GPS所反映的地壳变形信息可能受到块体类型控制；④云南及邻区的地壳S波分裂可能受其上地壳甚至地表构造影响较大. 相似文献
14.
基于搜集到的2000—2018年滇西北地区MS≥3.0地震的震源机制解,运用线性叠加反演法进行应力场反演,分析了滇西北地区现今的构造应力状态,进一步探讨了应力张量方差的时空分布与地震活动的关系。结果显示:① 滇西北地区地震的震源机制解类型复杂,主要以走滑型（46%）为主,正断型（27%）次之;② 研究区的构造应力场具有整体的一致性和局部的非均匀性,呈现为NNW向挤压和ENE向拉张的走滑型应力结构,说明研究区受到来自NNW向的水平挤压作用,对该地区上地壳运动和断裂活动起主导作用;③ 滇西北地区的应力张量方差大都小于0.2,除北部一些地区外,应力场基本处于均匀状态。根据应力张量方差随时间的变化和后续地震可知,中强地震大都发生在应力张量方差值低于0.2的情形,且主要发生在应力张量方差减小即震源机制解趋于一致的过程中。空间上这些地震基本都发生在应力张量方差的低值分布区及其边缘,这一结果有助于判定发震地点和了解区域应力集中增强过程。 相似文献
15.
16.
青藏块体近期地震活动特征 总被引：4，自引：0，他引：4
本文研究了青藏块体近期地震活动两个显著的现象;中强地震自印度板块北部由南向北的地震扩展迁移现象和中强震空间分布的北东向地震条带及其相关现象,探讨了其形成的物理机制,分析了它们的发展趋势,据此对本区地震活动趋势进行了预测。 相似文献
17.
IntroductionYunnanProvinceislocatedinthesouthofNorth-SouthseismiczoneinChina.ItisoneofthehighseismicactiveregionsinChinesemainland.Morethanonehundredstrongearthquakeswithmagnitude6ormoreoccurredinthisregioninhistory.AsanimportantsoutheasternmarginofTibetanPlateau,YunnanregionisahotspotinstudyonthedynamicsofTibetanPlateau.Theactionsofcompressivestressinnorth-southorientationandgravitationalpotentialcausedlateralextrusionofmaterialintheplateauwiththeupliftingofTibetanPlateau.Severalblocksa… 相似文献
18.
Using the seismic waveform data recorded by regional seismic network of Yunnan and Sichuan and the method of CAP, we calculate and obtain the focal mechanism of 268 earthquakes with the magnitude of ML≥4.0 occurring in Yunnan during Jan. 1999 to Aug. 2014; then, we analyze the types and the regional feature of the focal mechanism of earthquakes in Yunnan, on the basis of the focal mechanism of 109 earthquakes analyzed by Harvard University. Based on the data of the above focal mechanism solutions, we adopt the method of damped regional-scale stress inversion to calculate the best-fitting tectonic stress tensor of every grid in Yunnan; and adopt the method of maximum principal stress to calculate the direction of maximum horizontal principal stress in Yunnan. The result shows that: (1)the strike-slip type is the most principal type of the earthquake focus in the study area and the second is the normal faulting type; while, the reverse-fault type is relatively small. The spatial distribution of focal mechanism is obvious. This reflects that the dynamic source and acting force are different in different parts of the study area. (2)The direction of the stress field in Yunnan shows a certain spatial continuity. Maximum horizontal principal compressive stress is mainly clockwise from north to south and counterclockwise from the west to the east. The direction of stress field shows inhomogeneity in space. There exist two stress conversion zones respectively in EW and NS direction. The inversion result of stress field shows that the stress field in Yunnan is complex and the principal stress direction changes greatly; and there are obvious differences in different regions. 相似文献
19.
本文收集了1976—2018年发生在中国大陆及其周边地区(15°~55°N, 65°~125°E)的4303个地震震源机制解, 分析了该区震源机制解和P、 T轴空间分布特征, 并使用这些震源机制解, 反演得到了中国大陆及周边地区二维构造应力场分布。 应力场反演结果表明, 云南大部、 青藏高原大部以及华北华南大部以走滑型应力性质为主, 印度洋板块与欧亚板块的强烈碰撞控制着中国西部地区, 大量的逆断型地震集中分布在青藏高原周缘和西域活动地块的天山地区。 青藏高原内部也存在正断型地震, 且应力场方向在26°N发生了很大的变化。 位于青藏高原东构造线以南的滇缅活动块体, 最大主压应力σ1方向在大致100°E发生突变, 由以西的NNE方向偏转到NNW方向。 中国东部的东北块体到华北块体再到华南块体, 最大主压应力方向有一个从NE向逐渐转变成EW向再变化到NW向的旋转趋势。 应力场总体结果表明, 中国东部应力场主要受到太平洋板块和菲律宾板块对欧亚大陆俯冲的作用, 中国西部主要受印度板块向北碰撞欧亚大陆的影响, 块体内部相互作用、 块体与断裂带相互作用也对应力场变化产生影响。 相似文献