共查询到20条相似文献，搜索用时 31 毫秒
1.
V. A. Petrov Niu Anfu V. B. Smirnov A. O. Mostryukov Li Zhixiong A. V. Ponomarev Jiang Zaisen Shen Xuhui 《Izvestiya Physics of the Solid Earth》2008,44(10):846-855
Orientations of the principal axes of the tectonic stress field reconstructed from seismological data on focal mechanisms of earthquakes and strain fields determined from GPS measurements in China are compared. The data of GPS measurements used in the paper were obtained by the Crustal Movement Observation Network of China (about 1000 stations) in the period of 1998–2004. On the basis of information on the recent horizontal crustal motions, the strain field is calculated for the study territory by the finite element method. Calculations of the strain tensor using GPS data were carried out with a step of 1° in latitude and longitude. A catalog of earthquake focal mechanisms was used for the reconstruction of tectonic stress field components. Focal mechanisms of earthquakes were calculated with the use of seismological data on signs of first arrivals from the bulletin of the International Seismological Center. To estimate characteristics of the regional stress field, an approach based on the kinematic method proposed by O.I. Gushchenko was applied. The tectonic stress field was reconstructed in depth intervals of 0 < H < 35 km and 35 km < H < 70 km from data on focal mechanisms of earthquakes over the periods of 1998–2004 and 1985–2004. Comparison of directions of the principal strain axes at the surface (according to GPS measurements) and directions of the principal stress axes (reconstructed from focal mechanisms of earthquakes) showed their good convergence. Seismotectonic strains and GPS measurements coincide within a larger part of the territory. The coincidence is best in a depth interval of 0 < H < 35 km. Maximum misfit values are confined to areas of high 3-D gradients of strain axis directions and are possibly related to the structural heterogeneity of the region, zones with strains of the same type along both horizontal axes (compression or extension along all directions), or areas of small absolute values of recent horizontal movements. Areas with invariable directions of the stress axes are recognizable regardless of the depth of initial data. Good reproducibility of results obtained by two different methods made it possible to check the method of stress field reconstruction using data on focal mechanisms of earthquakes. 相似文献
2.
Shahrokh Pourbeyranvand 《Acta Geophysica》2018,66(6):1273-1290
The Alborz is one of the most important seismotectonic provinces in Iran. Furthermore, emplacement of Tehran as a mega city in southern part of the Alborz intensifies the seismic vulnerability in this area. In this study, the focal mechanism data from teleseismic and local seismic networks are used for stress tensor inversion. The earthquake focal mechanisms in the Central Alborz are divided into several groups with respect to their location. Two different stress tensor inversions, linear and nonlinear, are used for obtaining the principal stress orientations. The results show spatial variations in tectonic stress field, consistent with fault orientations and faulting mechanisms. The maximum compressional stress directions obtained in this study are confirmed by fast S-wave polarization axes reported by a previous shear wave splitting study. The maximum horizontal stress directions are also compared with GPS strain rates. The results indicate a partitioning of deformation in the area due to regional stresses along preexisting faults. 相似文献
3.
On the basis of the GPS data obtained from repeated measurements carried out in 2004 and 2007,the horizontal principal strain of the Chinese mainland is calculated,which shows that the direction of principal compressive strain axis of each subplate is basically consistent with the P-axis of focal mechanism solution and the principal compressive stress axis acquired by geological method.It indicates that the crustal tectonic stress field is relatively stable in regions in a long time.The principal compressive stress axes of Qinghai-Tibet and Xinjiang subplates in the western part of Chinese mainland direct to NS and NNE-SSW,which are controlled by the force from the col-lision of the Eurasia Plate and India Plate.The principal compressive strain axes of Heilongjiang and North China subplates in the eastern part direct to ENE-WSW,which shows that they are subject to the force from the collision and underthrust of the Eurasia Plate to the North America and Pacific plates.At the same time,they are also af-fected by the lateral force from Qinghai-Tibet and Xinjiang subplates.The principal compressive strain axis of South China plate is WNW-ESE,which reflects that it is affected by the force from the collision of Philippine Sea Plate and Eurasia Plate and it is also subject to the lateral force from Qinghai-Tibet subplate.It is apparent from the comparison between the principal compressive strain axes in the periods of 2004～2007 and 2001～2004 that the acting directions of principal compressive stress of subplates in both periods are basically consistent.However,there is certain difference between their directional concentrations of principal compressive stress axes.The sur-face strain rates of different tectonic units in both periods indicate that the events predominating by compressive variation decrease,while the events predominating by tensile change increase. 相似文献
4.
依据2002——2006年的中小地震资料,利用格点尝试法分析计算了华北北部4个应力小区的平均主应力轴,讨论了华北北部地区的现今应力场特征.在此基础上,对1977——1998年研究区内的单个地震震源机制解进行了进一步的分析计算,并结合以往的研究结果,研究了华北北部地区现今应力场随时间的变化特征,结果印证了唐山地震前后,唐山震源区及其邻近地区应力场主应力方向出现的转动和变化的现象:1976年唐山发生7.8级地震后,唐山震源区及其邻近的北京地区和邢台地区震源机制解的平均P轴可能顺时针转动了约15deg;——30deg;。北京地区和邢台地区近期（2002——2006年）的平均主应力轴与唐山地震前的综合断层面解较为一致,这两个地区应力场似乎转回到唐山地震前的状态. 而唐山区震源机制解的平均P轴在地震后则一直稳定在EW向上。位于张家口——渤海断裂带西段的京西北地区,其现今应力场则相对比较稳定,唐山地震前后主应力方向没有太大变动。鉴于数据资料等方面的原因,本文的研究结果仅仅是初步给出了华北北部地区应力场近几十年来一种可能的调整变化图象。 相似文献
5.
From focal mechanism solutions of the earthquakes in the northern part of North China during the period of 2002～2006,the directions of principal stress axes in 4 stress sub-districts are analyzed using a grid test method.The characteristic of present crustal stress directions is discussed.Based on this result and on the focal mechanism solutions calculated for some events in the period of 1977～1998,in combination with some other study results,the temporal variation of present crustal stress directions in the northern part of North China is investigated.The re-sults confirm that the direction of crustal principal stress in some regions had somewhat rotated after the 1976 Tangshan M7.8 earthquake.The mean P axes of the focal mechanism solutions rotated clockwise not only in Tangshan sub-district,but also in Beijing and Xingtai sub-districts after the Tangshan earthquake.In Beijing and Xingtai sub-districts the orientations of principal stress axes in the period of 2002～2006 are consistent with that before the Tangshan earthquake,implying that the stress orientations has rotated back to the state before the Tang-shan earthquake in these two sub-districts.The directions of the mean P axes are nearly E-W in Tangshan sub-dis-trict since the M7.8 earthquake.The present stress field in the sub-district northwest to Beijing,or in the western part of the Zhangjiakou-Bohai fault zone,is relatively stable during the time period concerned in this study.Because of the limitation of data,this paper only states a possible variation of stress field in the northern part of North China in the recent decades. 相似文献
6.
根据2004年和2007年GPS复测资料,计算出中国大陆的水平主应变数据,显示出各亚板块的主压应变轴方向与震源机制解的P轴和用地质方法得到的主压应力轴基本一致,表明在区域上和长时期中,地壳的构造应力场是相对稳定的．中国大陆西部的青藏亚板块和新疆亚板块的主压应力轴,为南北向及北北东-南南西向,受欧亚板块和印度板块相互碰撞而产生的作用力的控制;东部的黑龙江亚板块和华北亚板块的主压应变轴,为北东东-南西西向,显示出受欧亚板块与北美板块、太平洋板块碰撞俯冲产生的作用力影响,同时也受青藏亚板块和新疆亚板块侧向作用力的影响;华南亚板块的主压应变轴,为北西西-南东东向,反映出受菲律滨海板块与欧亚板块碰撞产生的作用力影响,同时也受青藏亚板块侧向作用力的影响．通过比较2004-2007年与2001-2004年的主压应变轴方向,反映出两个时间段各亚板块的主压应力作用方向基本一致,只是主应力轴方向集中程度有一定差别．前后两个时间段不同单元的面应变率显示,压性变化为主的数量减少,张性变化为主的数量有所增多． 相似文献
7.
Introduction Analyzing tectonic stress field based on focal mechanism data is an important way to the study tectonic evolvement of lithosphere and associated dynamic process. Such studies growrapidly in China and abroad (Zoback, 1992; Plenefisch, Bonjer, 1997; XU, 1985; CUI, XIE, 1999). At present most of the studies focus on the inversion of focal mechanism data for the direction and relative magnitude of stress tensor, and few on absolute stress. Using focal mechanism and fault scratch,… 相似文献
8.
In this paper, we present a model for studying aftershock sequences that integrates Coulomb static stress change analysis, seismicity equations based on rate-state friction nucleation of earthquakes, slip of geometrically complex faults, and fractal-like, spatially heterogeneous models of crustal stress. In addition to modeling instantaneous aftershock seismicity rate patterns with initial clustering on the Coulomb stress increase areas and an approximately 1/t diffusion back to the pre-mainshock background seismicity, the simulations capture previously unmodeled effects. These include production of a significant number of aftershocks in the traditional Coulomb stress shadow zones and temporal changes in aftershock focal mechanism statistics. The occurrence of aftershock stress shadow zones arises from two sources. The first source is spatially heterogeneous initial crustal stress, and the second is slip on geometrically rough faults, which produces localized positive Coulomb stress changes within the traditional stress shadow zones. Temporal changes in simulated aftershock focal mechanisms result in inferred stress rotations that greatly exceed the true stress rotations due to the main shock, even for a moderately strong crust (mean stress 50 MPa) when stress is spatially heterogeneous. This arises from biased sampling of the crustal stress by the synthetic aftershocks due to the non-linear dependence of seismicity rates on stress changes. The model indicates that one cannot use focal mechanism inversion rotations to conclusively demonstrate low crustal strength (≤10 MPa); therefore, studies of crustal strength following a stress perturbation may significantly underestimate the mean crustal stress state for regions with spatially heterogeneous stress. 相似文献
9.
利用俄罗斯堪察加地区1995～2005年的GPS观测数据,研究了该区现今地壳水平运动速度场特征.在球坐标系中解算了各应变率分量,分析了应变率场的空间分布特征,并与地震学和地质学研究结果进行了综合对比分析.结果表明,堪察加半岛北部的微板块边界并不明显,堪察加南部测站运动速度大于中部和北部地区,愈靠近东部板块汇聚区,测站速度越大.从东海岸到西海岸,测站水平速度存在明显的梯度衰减特征,水平运动方向与太平洋板块向西北的俯冲方向基本一致.各应变率分量具有东部海岸大于中部和西海岸、从东至西呈梯度衰减的特点.堪察加大部分地区处于EW和NS向压缩状态,局部存在拉张.面应变率结果显示绝大部分为压缩区;刚性转动结果表明大部分地区表现为顺时针转动,北部地区和南端顺时针旋转性明显.东部有效应变率明显大于西部地区,东西向梯度衰减关系明显.主压应变率明显大于主张应变率,特别是在东海岸地区.主压应变率方向与中等以上地震的主压应力轴在水平方向的投影方向基本一致.地壳变形场在空间分布上的不一致性主要与太平洋板块在堪察加半岛东南侧的俯冲深度、俯冲方位角、俯冲倾角和俯冲带的耦合强度有关. 相似文献
10.
分析研究了南黄海和东海地区18口石油勘探钻井的井孔崩落特征，结合对琉球岛弧和冲绳海槽地区浅源地震震源机制解的分析，确认了南黄海地区与我国华北地区有类似的现代构造应力场特征；并得出东海地区的最大水平压应力方向为NEE-SWW，最小水平压应力方向为NNW-SSE，它们分别与冲绳海槽地区的最大和最小主压应力方向接近;东海地区地壳上层的水平差应力可能不强，这与该地区没什么地震活动的特点是一致的．根据应力场特征推断，我国东部地区并未受到菲律宾海板块俯冲的推挤作用，而是可能受到垂直于冲绳海槽走向的拉伸作用的影响． 相似文献
11.
通过对山西数字地震台网2000年6月—2012年12月的波形记录资料的分析, 使用剪切波分裂系统分析方法, 即SAM综合分析方法, 获得了山西地区18个数字地震台站的快剪切波偏振结果. 结果表明: 位于活动断裂上的台站的快剪切波偏振优势方向与活动断裂的走向基本一致; 个别距离断裂较远的台站的快剪切波偏振优势方向与震源机制解及GPS主压应变方向完全一致; 少数位于几条断裂交汇处的台站的快剪切波偏振优势方向则较为复杂, 与活动断裂的走向和GPS主压应变方向均不一致, 反映了该地区断裂背景和应力分布特征的复杂性. 相似文献
12.
Wathiq Abdulnaby Hanan Mahdi Haydar Al-Shukri Nazar M. S. Numan 《Pure and Applied Geophysics》2014,171(9):2137-2153
The collision zone between the Arabian and Eurasian plates is one of the most seismically active regions. Northern Iraq represents the northeastern part of the Arabian plate that has a suture zone with the Turkish and Iranian plates called the Bitlis–Zagros suture zone. The orientations of the principal stress axes can be estimated by the formal stress inversion of focal mechanism solutions. The waveform moment tensor inversion method was used to derive a focal mechanism solution of 65 earthquakes with magnitudes range from 3.5 to 5.66 in the study area. From focal mechanism solutions, the direction of slip and the orientations of the moment stress axes (P, N, and T) on the causative fault surface during an earthquake were determined. The dataset of the moment stress axes have been used to infer the regional principal stress axes (σ 1, σ 2, and σ 3) by the formal stress inversion method. Two inversion methods, which are the new right dihedron and the rotational optimization methods, were used. The results show that six stress regime categories exist in the study area. However, the most common tectonic regimes are the strike-slip faulting (43.94 %), unspecified oblique faulting (27.27 %), and thrust faulting (13.64 %) regimes. In most cases, the strike-slip movement on the fault surfaces consists of left-lateral (sinistral) movement. The normal faulting is located in one small area and is due to a local tensional stress regime that develops in areas of strike-slip displacements as pull-apart basins. The directions of the horizontal stress axes show that the compressional stress regime at the Bitlis–Zagros suture zone has two directions. One is perpendicular to the suture zone near the Iraq–Iran border and the second is parallel in places as well as perpendicular in others to the suture zone near the Iraq–Turkey border. In addition, the principal stress axes in the Sinjar area near the Iraq–Syria border have a E–W direction. These results are compatible with the tectonic setting of the Arabian–Eurasian continental collision zone and the anticlockwise rotation of the Arabian plate that is evidently responsible for the strike-slip displacements on fault surfaces. 相似文献
13.
台湾是菲律宾海板块与欧亚板块会聚、碰撞的产物,区内地质构造复杂,地震频发,变形强烈.为定量研究台湾地区变形特征及其动力学成因,文中运用二维不连续变形体弹性力学的有限单元计算方法,利用台湾地区1995—2005年GPS的观测结果作为边界约束,对台湾地区地壳变形场进行了模拟.计算结果显示,台湾中部地区主要呈压缩状态,但在台湾的东北部及南部地区出现了拉张的变形环境.变形程度最大的区域位于台湾东部海岸山脉及其附近海域,同时,计算给出台湾纵谷断裂滑移速率约为13.8~23.5mm/yr,由于纵谷断裂对变形的吸收,因此变形在纵谷断裂以西及西北地区迅速衰减.此外,计算结果还发现,计算给出的台湾岛上的速度值与GPS观测结果吻合得较好;计算给出的主应力方位与地应力观测及震源机制解结果也颇为一致.由此说明文中的有限元模型是合理的.此外,计算结果还表明,菲律宾海板块向北西方向的推挤,板块边界形状,观音、北康高地的抵阻,冲绳海槽扩张及琉球海沟的向南后撤以及断裂作用等,共同造成了台湾地区现今变形场的主要格局. 相似文献
14.
对中国大陆地壳水平变形的初步探索 总被引：13，自引：0，他引：13
根据全国ＧＰＳ网１９９４和１９９６年两期观测资料的处理结果,讨论了中国大陆地区现阶段应变场和应力场。青藏亚板块的西部和东部张应变起主导作用,中部压应变占优势,主压应变方向为北北东向;青藏亚板块东南部东南段云南地区的主压应变方向为北西向,压应变和张应变量级相当。新疆亚板块的主压应役北北东向至北东向为主,应变量存在差别。华北亚板块的主压应变方向是北东至近东西向为主导,局部地段存在差别,大部分地区压应变 相似文献
15.
The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau. 相似文献
16.
Yanxing Li Guohua Yang Zhi Li Liangqian Guo Cheng Huang Wenyao Zhu Yang Fu Qi Wang Zaisen Jiang Min Wang 《中国科学D辑(英文版)》2003,46(2):82-117
The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90°E is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2 ± 1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1 ± 0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8 ± 1.3 mm/a in the central part of Altun fault and 9.8 ± 2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau. 相似文献
17.
Fataneh Taghizadeh-Farahmand Forough Sodoudi Narges Afsari Mohammad R. Ghassemi 《Journal of Seismology》2010,14(4):823-836
We computed P and S receiver functions to investigate the lithospheric structure beneath the northwest Iran and compute the Vp/Vs ratio within the crust of this seismologically active area. Our results enabled us to map the lateral variations of the Moho as well as those of the lithosphere–asthenosphere boundary (LAB) beneath this region. We selected data from teleseismic events (Mb?>?5.5, epicentral distance between 30° and 95° for P receiver functions and Mb?>?5.7, epicentral distance between 60° and 85° for S receiver functions) recorded from 1995 to 2008 at 8 three-component short-period stations of Tabriz Telemetry Seismic Network. Our results obtained from P receiver functions indicate clear conversions at the Moho boundary. The Moho depth was firstly estimated from the delay time of the Moho converted phase relative to the direct P wave. Then we used the H-Vp/Vs stacking algorithm of Zhu and Kanamori to estimate the crustal thickness and Vp/Vs ratio underneath the stations with clear Moho multiples. We found an average Moho depth of 48 km, which varies between 38.5 and 53 km. The Moho boundary showed a significant deepening towards east and north. This may reveal a crustal thickening towards northeast possibly due to the collision between the Central Iran and South Caspian plates. The obtained average Vp/Vs ratio was estimated to be 1.76, which varies between 1.73 and 1.82. The crustal structure was also determined by modeling of P receiver functions. We obtained a three-layered model for the crust beneath this area. The thickness of the layers is estimated to be 6–11, 18–35, and 38–53 km, respectively. The average of the shear wave velocity was calculated to be 3.4 km/s in the crust and reaches 4.3 km/s below the Moho discontinuity. The crustal thickness values obtained from P receiver functions are in good agreement with those derived by S receiver functions. In addition, clear conversions with negative polarity were observed at ~8.7 s in S receiver functions, which could be related to the conversion at the LAB. This may show a relatively thin continental lithosphere of about 85 km implying that the lithosphere was influenced by various geodynamical reworking processes in the past. 相似文献
18.
Guo Liangqian 《中国地震研究》2000,14(4):312-322
In the paper, the current strain field and stress field in Chinese continent have been discussedbased on the processed data from two GPS campaigns of national GPS network carried out inthe years of 1994 and 1996. With a principal compressional strain direction of NNE, thewestern and castern parts of Qinghai-Xizang subplate are dominated by extensional straiu andthe central Part by compressional strain. Along the southwestern segment of southeastern partof Qinghai-Xizang subplate, i. e. Yunnan area, the princiPal compressional strain direction isNW and the compressional strain is equivalent to the extensional strain in magnitude. Theprincipal compressional strain of Xinjiang subplate is mainly NNE and NE with a difference inthe strain magnitude. The principal compressional strain in North China subplate is quite effective in NE and nearly EW directions with differences along some segments. However, thecompressional strain is corresponding to the extensional strain in magnitude in most areas. Theprincipal 相似文献
19.
Yoichiro Fujii 《Pure and Applied Geophysics》1995,144(1):19-37
In order to study characteristics of horizontal crustal strains, we divide the Japanese Islands into 14 tectonic provinces
consistent with the suggestion given byMatsuda (1990). We calculate frequency distribution of strain rates using the results of the Precise Control Survey initiated by
the Geographical Survey Institute in 1973. This survey is a revision of old first- and second-order triangulation networks
by trilateration. The principal axes and principal strains inside all the geodetic triangles are deduced from the comparison
of the old triangulation and the new trilateration networks. The maximum shear strain rates are calculated by dividing the
accumulated strains with the time intervals. The frequency distribution of strain rates is counted for each tectonic province
and for the entire Japanese Islands.
It is proved that the maximum shear strain rate with highest frequency ranges from 0.10–0.15 microstrain/a for 4409 data in
the Japanese Islands. The mean value of the strain rates throughout the Japanese Islands is deduced to be 0.18 microstrain/a.
We also calculated a mean value of strain rates for each tectonic province. Comparison is made between mean geodetic strain
rates in the provinces and Quaternary strain rates estimated by geomorphic data. It is found that 0.3–0.4 microstrain/a of
the highest order strain rate is now prevailing in the Izu province, the south Fossa-Magna collision zone, and some special
provinces along the eastern part of the Japan Sea coast. 相似文献
20.
本文采用摩尔圆模型推导出中国和美国3种不同类型的四分量不同布设的两套钻孔应变的5组观测组合公式,随机选取了25个台站多年的观测资料计算5组最大、最小主应变及主方向,并采用两两相关和回归分析的方法对其一致性进行了检核.计算结果显示:经过大致1—2年时间后,应变不变量变化稳定,主应变及主方向越来越接近;大多数台站5组最大、最小主应变数值之间的相关系数和回归系数接近于1,表明这些仪器记录的应变数据具有客观真实性.5组主方向数值相差较大,本文对此进行了分析,并给出了5组观测组合公式的误差估计,发现主应变计算值的最大均方根误差是有上限的,主方向没有上限.最后对影响钻孔应变5组不变量一致性的一些因素进行了初步探讨.研究结果表明钻孔应变观测技术有其特殊的困难,在经历了半个世纪实践后,取得了重要进展,但仍有一些技术问题亟待解决. 相似文献