首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
  相似文献   

2.
An earthquake with a magnitude of 5.7 $(\text{ M}_{\mathrm{L}})$ has struck Simav, Kutahya located in the western part of Turkey on May 19, 2011. The ground motion caused observable damage within 25 km radius from the epicenter. Although the earthquake is moderate, its effects on the structures are serious. This paper presents the observations on seismic damages of reinforced concrete (RC) and masonry structures. Common reasons of damage in RC buildings are: low quality of concrete, detailing mistakes of reinforcement, short column, pounding, overhangs and misconstructed gable and outer infill wall parts. Interesting cases related to these deficiencies are reported. Damages in the masonry buildings are due to lack of connection between orthogonal walls and unsuitable location and dimension of openings. The damages at structures are more noticeable at regions with unfavorable soil conditions like plain regions or foothills. However, on stiffer soils at hilly sides, the damages seem to be more limited and masonry structures are observed to be less affected compared to the RC ones. The damages in RC buildings found to be increasing with story number for light damage states. However, for heavier damage states, 4–5 story buildings are observed to be the most damaged.  相似文献   

3.
The city of Lorca (Spain) was hit on May 11th, 2011, by two consecutive earthquakes of magnitudes 4.6 and 5.2 M \(_\mathrm{w}\) , causing casualties and important damage in buildings. Many of the damaged structures were reinforced concrete frames with wide beams. This study quantifies the expected level of damage on this structural type in the case of the Lorca earthquake by means of a seismic index \(I_{v}\) that compares the energy input by the earthquake with the energy absorption/dissipation capacity of the structure. The prototype frames investigated represent structures designed in two time periods (1994–2002 and 2003–2008), in which the applicable codes were different. The influence of the masonry infill walls and the proneness of the frames to concentrate damage in a given story were further investigated through nonlinear dynamic response analyses. It is found that (1) the seismic index method predicts levels of damage that range from moderate/severe to complete collapse; this prediction is consistent with the observed damage; (2) the presence of masonry infill walls makes the structure very prone to damage concentration and reduces the overall seismic capacity of the building; and (3) a proper hierarchy of strength between beams and columns that guarantees the formation of a strong column-weak beam mechanism (as prescribed by seismic codes), as well as the adoption of counter-measures to avoid the negative interaction between non-structural infill walls and the main frame, would have reduced the level of damage from \(I_{v}\) \(\,=\,\) 1 (collapse) to about \(I_{v}\) \(\,=\,\) 0.5 (moderate/severe damage).  相似文献   

4.
  相似文献   

5.
This paper describes the observations made by a reconnaissance team following the 22nd February 2011, Mw 6.3, Christchurch, New Zealand earthquake (GNS Science, 2011). The team comprised of members of the UK based Earthquake Engineering Field Investigation Team who spent 5 days collecting observations on damage resulting from the earthquake. Although the magnitude of this earthquake was not particularly high (Mw 6.3), the shallow focus and close proximity resulted in locally very high ground motions, widespread damage and 182 fatalities. The earthquake is also particularly notable for the widespread liquefaction it caused, landslides and rockfalls in the hills south of Christchurch, and the significant damage suffered by unreinforced masonry and historic structures. Over wide areas of central Christchurch, recorded accelerations were in excess of those required by the current New Zealand seismic loadings standard (NZS1170.5:2004: Standards New Zealand 2004) and therefore the earthquake presented a valuable opportunity to assess performance of modern buildings under code-level ground acceleration.  相似文献   

6.
In this paper a recently developed multimode pushover procedure for the approximate estimation of structural performance of asymmetric in plan buildings under biaxial seismic excitation is evaluated. Its main idea is that the seismic response of an asymmetric multi-degree-of-freedom system with \(N\) degrees of freedom under biaxial excitation can be related to the responses of \(N\) ‘modal’ equivalent single-degree-of-freedom (E-SDOF) systems under uniaxial excitation. The steps of the proposed methodology are quite similar to those of the well-known modal pushover analysis. However, the establishment of the (E-SDOF) systems is based on a new concept, in order to take into account multidirectional seismic effects. The proposed methodology does not require independent analysis in the two orthogonal directions and therefore the application of simplified superposition rules for the combination of seismic component effects is avoided. After a brief outline of the theoretical background and the application process, an extensive evaluation study is presented, which shows that, in general, the proposed methodology provides a reasonable estimation for the vast majority of the calculated response parameters.  相似文献   

7.
At present, the seismic vulnerability assessment of reinforced concrete (RC) buildings is made considering fixed base conditions; moreover, the mechanical properties of the building remain intact in time. In this study we investigate whether these two fundamental hypotheses are sound as aging and soil-structure interaction (SSI) effects might play a crucial role in the seismic fragility analysis of RC structures. Among the various aging processes, we consider the chloride-induced corrosion based on probabilistic modeling of corrosion initiation time and corrosion rate. Different corrosion aspects are considered in the analysis including the loss of reinforcement cross-sectional area, the degradation of concrete cover and the reduction of steel ultimate deformation. SSI is modeled by applying the direct one-step approach, which accounts simultaneously for inertial and kinematic interactions. Two-dimensional incremental dynamic analysis is performed to assess the seismic performance of the initial uncorroded ( \(\hbox {t}=0\) years) and corroded ( \(\hbox {t}=50\) years) RC moment resisting frame structures, having been designed with different seismic code levels. The time-dependent fragility functions are derived in terms of the spectral acceleration at the fundamental mode of the structure \(\hbox {S}_{\mathrm{a}}(\hbox {T}_{1}\) , 5 %) and the outcropping peak ground acceleration for the immediate occupancy and collapse prevention limit states. Results show an overall increase in seismic vulnerability over time due to corrosion highlighting the important influence of deterioration due to aging effects on the structural behavior. Moreover, the consideration of SSI and site effects may significantly alter the expected structural performance leading to higher vulnerability values.  相似文献   

8.
  相似文献   

9.
In a companion article Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4, 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) present a new ground-motion prediction equation (GMPE) for estimating 5 %-damped horizontal pseudo-acceleration spectral (PSA) ordinates for shallow active crustal regions in Europe and the Middle East. This study provides a supplementary viscous damping model to modify 5 %-damped horizontal spectral ordinates of Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) for damping ratios ranging from 1 to 50 %. The paper also presents another damping model for scaling 5 %-damped vertical spectral ordinates that can be estimated from the vertical-to-horizontal (V/H) spectral ratio GMPE that is also developed within the context of this study. For consistency in engineering applications, the horizontal and vertical damping models cover the same damping ratios as noted above. The article concludes by introducing period-dependent correlation coefficients to compute horizontal and vertical conditional mean spectra (Baker in J Struct Eng 137:322–331, 2011). The applicability range of the presented models is the same as of the horizontal GMPE proposed by Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b): as for spectral periods $0.01 \hbox { s}\le \,\hbox {T}\le \,4\hbox { s}$ as well as PGA and PGV for V/H model; and in terms of seismological estimator parameters $4\le \hbox {M}_\mathrm{w} \le 8, \hbox { R} \le 200 \hbox { km}, 150\hbox { m/s}\le \hbox { V}_\mathrm{S30}\le $ 1,200 m/s, for reverse, normal and strike-slip faults. The source-to-site distance measures that can be used in the computations are epicentral $(\hbox {R}_\mathrm{epi})$ , hypocentral $(\hbox {R}_\mathrm{hyp})$ and Joyner–Boore $(\hbox {R}_\mathrm{JB})$ distances. The implementation of the proposed GMPEs will facilitate site-specific adjustments of the spectral amplitudes predicted from probabilistic seismic hazard assessment in Europe and the Middle East region. They can also help expressing the site-specific design ground motion in several formats. The consistency of the proposed models together with the Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) GMPE may be advantageous for future modifications in the ground-motion definition in Eurocode 8 (CEN in Eurocode 8, Design of structures for earthquake resistance—part 1: general rules, seismic actions and rules for buildings. European Standard NF EN 1998-1, Brussels, 2004).  相似文献   

10.
A damaging seismic sequence hit a wide area mainly located in the Emilia-Romagna region (Northern Italy) during 2012 with several events of local magnitude \(\hbox {M}_\mathrm{l} \ge 5\) , among which the \(\hbox {M}_\mathrm{l}\) 5.9 May 20 and the \(\hbox {M}_\mathrm{l}\) 5.8 May 29 were the main events. Thanks to the presence of a permanent accelerometric station very close to the epicentre and to the temporary installations performed in the aftermath of the first shock, a large number of strong motion recordings are available, on the basis of which, we compared the recorded signals with the values provided by the current Italian seismic regulations, and we observed several differences with respect to horizontal components when the simplified approach for site conditions (based on Vs30 classes) is used. On the contrary, when using the more accurate approach based on the local seismic response, we generally obtain a much better agreement, at least in the frequency range corresponding to a quarter wavelength comparable with the depth of the available subsoil data. Some unresolved questions still remain, such as the low frequency behaviour ( \(<\) 1 Hz) that could be due either to complex propagation at depth larger than the one presently investigated or to near source effects, and the behaviour of vertical spectra whose recorded/code difference is too large to be explained with the information currently available.  相似文献   

11.
On August 21st, 2017, an earthquake with duration magnitude Md?=?4.0 and epicentre in Casamicciola Terme hit Ischia island, in the South of Italy. This event caused two fatalities and dozens of injured people. Moreover, despite the low magnitude, the earthquake produced significant damages to masonry and reinforced concrete (RC) buildings, with some partial or complete collapse of structures, in a very limited area close to the epicentre, while even at small distance from the most damaged zone the earthquake was just felt by local people and tourists. In the days after the event, discussions concerning the destructive effects of such an earthquake arose in the scientific community—as also reported by local and national media. In this paper, the seismic history of Ischia island is recalled to show and explain the peculiarity of the August 21st earthquake, which is also described in terms of ground motion and response spectra characteristics. The results of the first surveys carried out in Casamicciola Terme are reported, together with appropriate pictures, to introduce and explain the observed damage state of masonry and RC buildings in the epicentral zone. Then, data from the 15th general census of the population and dwellings (ISTAT) is used to define vulnerability classes according to the classification of the European Macrosismic Scale (EMS-98) (Grünthal, 1998). Seismic damage scenarios are then evaluated combining macro-seismic intensity values obtained using an interpolation method starting from QUEST macro-seismic survey data (Azzaro et al., 2017 ) and fragility curves for A-to-D vulnerability classes and for five damage states, from DS0 (no damage) to DS5 (collapse) trough a Monte Carlo simulation technique. The distributions of Usable, Temporarily or Partially Unusable, and Unusable buildings, which are obtained by using relationships between damage and usability judgments obtained through post-earthquake damage data collected after past seismic events, result in very good accordance with those published in September 1st, 2017 by the Department of Civil Protection, regarding a dataset of about 600 buildings.  相似文献   

12.
Located at the North-Eastern part of Algeria (Tellian Atlas), Constantine has crucial administrative, economic, scientific and cultural importance. It has continuously experienced significant urban evolutions during the different periods of its history. The city is located in an active seismic region within Algeria and has been struck in the past by several moderate and strong earthquakes. The strongest earthquake recorded since the beginning of instrumental seismology took place on October 27, 1985 with a magnitude M \(_\mathrm{S}=\) 5.9. Constantine presents a high seismic risk, because of its dense housing and high population density (2,374 inhabitants/km \(^{2})\) . This requires a risk assessment in order to take preventive measures and reduce the losses in case of potential major earthquake. For this purpose, a scenario based approach is considered. The building damage assessment methodology adopted for the Algerian context is adapted from HAZUS approach. In the present case, the effective Algerian seismic code response spectrum (RPA 99/2003) is considered as a seismic hazard model. The prediction of the expected damages is performed for a set of almost 29,000 buildings.  相似文献   

13.
On May 11, 2011 an earthquake of magnitude 5.1 ( \(M_{w}\) ) struck Murcia region causing nine casualties and damage to buildings and infrastructures. Even if the main characteristics of the event would classify it as a moderate earthquake, the maximum Peak Ground Acceleration (PGA) registered (equal to 0.37 g) exceeded significantly local code provisions in terms of hazard at the site. This high PGA was a result of directivity effects in the near source region. An overview of earthquake characteristics and damage observed is provided. Notwithstanding the lack of proper structural design characterizing building stock in the area, most of the losses were caused by non-structural damage. According to in field observations, it emerges that masonry infills provided additional, “not designed”, strength to reinforced concrete (RC) buildings. Observed damage data, collected after the earthquake, are shown and compared to the results of a simplified approach for nonstructural damage assessment of RC infilled structures (FAST vulnerability approach). The latter comparison provided a fair accordance between observed data and analytical results.  相似文献   

14.
The Lorca Basin has been the object of recent research aimed at studying the phenomena of earthquake-induced landslides and its assessment in the frame of different seismic scenarios. However, it has not been until the 11th May 2011 Lorca earthquakes when it has been possible to conduct a systematic approach to the problem. In this paper we present an inventory of slope instabilities triggered by the Lorca earthquakes which comprises more than 100 cases, mainly rock and soil falls of small size (1–100  \(\hbox {m}^{3}\) ). The distribution of these instabilities is here compared to two different earthquake-triggered landslide hazard maps: one considering the occurrence of the most probable earthquake for a 475-years return period in the Lorca Basin \((\hbox {M}_{\mathrm{w}}=5.0)\) based on both low- and high-resolution digital elevation model (DEM); and a second one matching the occurrence of the \(\hbox {M}_{\mathrm{w}}=5.2\) 2011 Lorca earthquake, which was performed using the higher resolution DEM. The most frequent Newmark displacements related to the slope failures triggered by the 2011 Lorca earthquakes are lower than 2 cm in both the hazard scenarios considered. Additionally, the predicted Newmark displacements were correlated to the inventory of slope instabilities to develop a probability of failure equation. The fit seems to be very good since most of the mapped slope failures are located on the higher probability areas. The probability of slope failure in the Lorca Basin for a seismic event similar to the \(\hbox {M}_{\mathrm{w}}\) 5.2 2011 Lorca earthquake can be considered as very low (0–4 %).  相似文献   

15.
A complex seismic sequence characterised by two thrust earthquakes of magnitudes M \(_\mathrm{L}\) 5.9 and M \(_\mathrm{L}\) 5.8 occurred on May 20 and 29, 2012, respectively, and activated the central portion of the Ferrara Arc structure beneath the Po Plain in northern Italy. The sequence, referred to as Emilia 2012, was recorded by the Italian Strong Motion Network, the Irpinia Network, the Friuli Venezia Giulia Network and 15 temporary stations installed by the Civil Protection Department. In this study, we compile and analyse a large dataset that contains 3,273 waveforms from 37 \(M_\mathrm{L} \ge 4.0\) seismic events. The main aim of this paper is to characterise the ground motion induced by the Emilia 2012 seismic sequence and compare it with other data in the Italian strong motion database and to the recent Ground Motion Prediction Equations (GMPEs) developed for northern Italy, all of Italy and Europe. This is achieved by (1) the computation and analysis of the strong motion parameters of the entire Emilia Strong Motion Dataset (ESMD) and (2) a comprehensive investigation of the May 29 event recordings in terms of time–frequency analysis, the ground motion parameters and the response spectra. This detailed analysis was made possible by the temporary Civil Protection Department stations that were installed soon after the May 20 event at several municipalities in the epicentral area. Most of the recordings are characterised by low-frequency content and long durations, which is a result of the thick sedimentary cover that is typical of the Po Plain. The distributions of the observed horizontal peak ground accelerations and velocities (PGAs and PGVs) with distance are generally consistent with the GMPEs. This is particularly true for the data from M \(_\mathrm{L} \ge \) 5.0 (M \(_\mathrm{W}\ge \) 5.0) events, though the data are scattered at distances beyond approximately 60–70 km and show faster attenuation than the European GMPEs. The horizontal components for the May 29 event at two near-fault stations (Mirandola and San Felice sul Panaro) are overestimated by all of the analysed GMPEs. In contrast, the vertical components, which played an important role in the shaking near the source, are underestimated. The May 29 event produced intense velocity pulses on the horizontal components and the highest peak ground acceleration ever recorded in Italy on the vertical component of the Mirandola near-fault station. The ground motion recordings contained in the ESMD significantly enrich the Italian strong motion database. They contribute new information about (1) the possibility of exceeding the largest recorded PGA in Italy, (2) the development of a spectral design that takes into account the role of the vertical component and the extreme variability of the near-fault ground shaking, and (3) the characterisation of the ground motions in deep sedimentary basins.  相似文献   

16.
We estimate the corner frequencies of 20 crustal seismic events from mainshock–aftershock sequences in different tectonic environments (mainshocks 5.7 < M W < 7.6) using the well-established seismic coda ratio technique (Mayeda et al. in Geophys Res Lett 34:L11303, 2007; Mayeda and Malagnini in Geophys Res Lett, 2010), which provides optimal stability and does not require path or site corrections. For each sequence, we assumed the Brune source model and estimated all the events’ corner frequencies and associated apparent stresses following the MDAC spectral formulation of Walter and Taylor (A revised magnitude and distance amplitude correction (MDAC2) procedure for regional seismic discriminants, 2001), which allows for the possibility of non-self-similar source scaling. Within each sequence, we observe a systematic deviation from the self-similar \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - 3} \) line, all data being rather compatible with \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - (3 + \varepsilon )} \) , where ε > 0 (Kanamori and Rivera in Bull Seismol Soc Am 94:314–319, 2004). The deviation from a strict self-similar behavior within each earthquake sequence of our collection is indicated by a systematic increase in the estimated average static stress drop and apparent stress with increasing seismic moment (moment magnitude). Our favored physical interpretation for the increased apparent stress with earthquake size is a progressive frictional weakening for increasing seismic slip, in agreement with recent results obtained in laboratory experiments performed on state-of-the-art apparatuses at slip rates of the order of 1 m/s or larger. At smaller magnitudes (M W < 5.5), the overall data set is characterized by a variability in apparent stress of almost three orders of magnitude, mostly from the scatter observed in strike-slip sequences. Larger events (M W > 5.5) show much less variability: about one order of magnitude. It appears that the apparent stress (and static stress drop) does not grow indefinitely at larger magnitudes: for example, in the case of the Chi–Chi sequence (the best sampled sequence between M W 5 and 6.5), some roughly constant stress parameters characterize earthquakes larger than M W ~ 5.5. A representative fault slip for M W 5.5 is a few tens of centimeters (e.g., Ide and Takeo in J Geophys Res 102:27379–27391, 1997), which corresponds to the slip amount at which effective lubrication is observed, according to recent laboratory friction experiments performed at seismic slip velocities (V ~ 1 m/s) and normal stresses representative of crustal depths (Di Toro et al. in Nature in press, 2011, and references therein). If the observed deviation from self-similar scaling is explained in terms of an asymptotic increase in apparent stress (Malagnini et al. in Pure Appl Geophys, 2014, this volume), which is directly related to dynamic stress drop on the fault, one interpretation is that for a seismic slip of a few tens of centimeters (M W ~ 5.5) or larger, a fully lubricated frictional state may be asymptotically approached.  相似文献   

17.
It has been observed that post-critically reflected S-waves and multiples from the Moho discontinuity could play a relevant role on the ground motion due to medium to strong size earthquakes away from the source. Although some studies investigated the correlation between the Moho reflections amplitudes and the damage in the far field, little attention was given to the frequency content of these specific phases and their scaling with magnitude. The 2012 Emilia seismic sequence in northern Italy, recorded by velocimetric and accelerometric networks, is here exploited to investigate Moho reflections and multiples (SmSM). A single station method for group velocity-period estimation, based on the multiple filter technique, is applied to strong motion data to detect SmSM. Amplitude and frequency scaling with magnitude is defined for earthquakes from \(\hbox {Mw}=3.9\) to \(\hbox {Mw}=5.9\) . Finally, the ability of SmSM to affect the ground motion for a maximum credible earthquake within the Po plain is investigated by extrapolating observed engineering parameters. Data analysis shows that high amplitude SmSM can be recognized within the Po plain, and at the boundaries between the Po plain and the Alpine chain, at epicentral distances larger than 80 km, in the period range from 0.25 to 3 s and in the group velocity window from about 2.6 to 3.2 km/s. 5 % damped pseudo-spectral accelerations at different periods (0.3, 1.0 and 2.0 s), and Housner intensities, are obtained from data characterized by large amplitude SmSM. A scaling relationship for both pseudo-spectral accelerations and Housner intensities is found for the earthquakes of the 2012 Emilia seismic sequence. \(\hbox {I}_{\mathrm{MCS}}\) from VII to VIII is estimated, as a result of SmSM amplitude enhancement, at about 100 km for a maximum credible earthquake ( \(\hbox {Mw}=6.7\) ) in the Po plain, showing that moderate to high damage cloud be caused by these specific phases.  相似文献   

18.
We applied the maximum likelihood method produced by Kijko and Sellevoll (Bull Seismol Soc Am 79:645–654, 1989; Bull Seismol Soc Am 82:120–134, 1992) to study the spatial distributions of seismicity and earthquake hazard parameters for the different regions in western Anatolia (WA). Since the historical earthquake data are very important for examining regional earthquake hazard parameters, a procedure that allows the use of either historical or instrumental data, or even a combination of the two has been applied in this study. By using this method, we estimated the earthquake hazard parameters, which include the maximum regional magnitude $ \hat{M}_{\max } , $ the activity rate of seismic events and the well-known $ \hat{b} $ value, which is the slope of the frequency-magnitude Gutenberg-Richter relationship. The whole examined area is divided into 15 different seismic regions based on their tectonic and seismotectonic regimes. The probabilities, return periods of earthquakes with a magnitude M?≥?m and the relative earthquake hazard level (defined as the index K) are also evaluated for each seismic region. Each of the computed earthquake hazard parameters is mapped on the different seismic regions to represent regional variation of these parameters. Furthermore, the investigated regions are classified into different seismic hazard level groups considering the K index. According to these maps and the classification of seismic hazard, the most seismically active regions in WA are 1, 8, 10 and 12 related to the Alia?a Fault and the Büyük Menderes Graben, Aegean Arc and Aegean Islands.  相似文献   

19.
This paper estimates fundamental translational period and damping ratio parameters and examines the changes in dynamic characteristics of a set of low-to-medium rise buildings in Lorca town (SE of Spain) affected by the May 11th, 2011 earthquake. These building parameters have been calculated analysing structural dynamic response from ambient vibration measurements recorded at top RC buildings pre- and post earthquake, using the Fast Fourier Transform and the Randomdec technique. The empirical expression relating period \((T)\) and number of floor \((N)\) here obtained analysing ambient noise recorded on 59 healthy buildings before the earthquake is \(T= (0.054\pm 0.002)\, N\) , very similar to others empirical period–height relationships obtained for RC structures in the European built environment but quite different from code provisions. Measurements performed in 34 damaged buildings show a period elongation after the quake according to \(T^{*} =(0.075\pm 0.002)\,N\) expression. Moreover, we found a rise of the fundamental period with the EMS’s grade of damage of buildings. In contrast to natural frequency, damping ratio \((\xi )\) do not shows a significant variation with earthquake damage degree and the product \(\xi \, T\) remains near constant.  相似文献   

20.
The seismic behaviour of caisson foundations supporting typical bridge piers is analysed with 3D finite elements, with due consideration to soil and interface nonlinearities. Single-degree-of freedom oscillators of varying mass and height, simulating heavily and lightly loaded bridge piers, founded on similar caissons are studied. Four different combinations of the static ( $\text{ FS }_\mathrm{V}$ FS V ) and seismic ( $\text{ FS }_\mathrm{E}$ FS E ) factors of safety are examined: (1) a lightly loaded ( $\text{ FS }_\mathrm{V}= 5$ FS V = 5 ) seismically under-designed ( $\text{ FS }_\mathrm{E} < 1$ FS E < 1 ) caisson, (2) a lightly loaded seismically over-designed ( $\text{ FS }_\mathrm{E} >1$ FS E > 1 ) caisson, (3) a heavily loaded ( $\text{ FS }_\mathrm{V} = 2.5$ FS V = 2.5 ) seismically under-designed ( $\text{ FS }_\mathrm{E} < 1$ FS E < 1 ) caisson and (4) a heavily loaded seismically over-designed caisson. The analysis is performed with use of seismic records appropriately modified so that the effective response periods (due to soil-structure-interaction effects) of the studied systems correspond to the same spectral acceleration, thus allowing their inelastic seismic performance to be compared on a fair basis. Key performance measures of the systems are then contrasted, such as: accelerations, displacements, rotations and settlements. It is shown that the performance of the lightly loaded seismically under-designed caisson is advantageous: not only does it reduce significantly the seismic load to the superstructure, but it also produces minimal residual displacements of the foundation. For heavily loaded foundations, however ( $\text{ FS }_{V} = 2.5$ FS V = 2.5 ), the performance of the two systems (over and under designed) is similar.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号