共查询到19条相似文献，搜索用时 156 毫秒
1.
We determine the stress field of Guangdong and its adjacent area by using focal mechanism solutions of 137 earthquakes and obtain tectonic stress tensors in 12 zones. The result shows that the azimuth of maximum principal stress σ1 is approximately WNW in southwestern Fujian, southern Jiangxi, Guangdong’s Heyuan and the Pearl River Delta, NW in Guangdong’s Yangjiang, and nearly NNW in the two zones of eastern Guangxi and Beibuwan Gulf (the Northern Gulf), varying clockwise in WNW-NW-NNW from east to west. The azimuth of minimum principal stress σ3 varies from NNE to ENE. The relative magnitude of medium principal stress σ2 (R value), is the smallest in Beibuwan and largest in Longyan of Fujian. Strike-slip faulting is dominated in the study area. 相似文献
2.
By using 126 earthquake focal mechanism solutions (M S≥4.7) during the period of 1963～1998, modern tectonic stress field in North China is inverted by means of the step by step convergence. The inversion results indicate that the tectonic stress field in the research region is clearly variational in space and time: (1) The middling principal stress axis σ 2 is basically vertical. The maximum and minimum principal stress axes σ 1 and σ 2 are nearly horizontal, but the azimuths of σ 1 and σ 3 are inconsistent in different districts and periods. (2) Before the Tangshan earthquake in 1976, the three principal stress axes are uniform. The azimuth of maximum principal stress axis σ 1 is 68° (striking in a NEE-SWW direction). (3) After the Tangshan earthquake, the maximum principal stress axis σ 1 and minimum principal stress axis σ 3 have variations in different districts. In the northern area of North China and on the eastern side of the Tancheng-Lujiang fault zone, the maximum principal stress axis σ 1 is also striking in a NEE-SWW direction. Its azimuth is 68°. It is the same as that before the Tangshan earthquake. In the southern area of North China, the maximum principal stress axis σ 1 is striking in a E-W direction and its azimuth is 87°. 相似文献
3.
《中国地震研究》2016,(1)
Based on the teleseismic waveform data recorded by 82 permanent broadband stations in Guangdong Province and its adjacent areas including Fujian,Jiangxi,Hunan,Guangxi,Hainan and Taiwan,we calculate body wave receiver functions under all stations,and obtain the crustal thickness and average Poissons ratio beneath all stations by the H-κstacking-search method of receiver function. The results show that the crustal thickness with an average thickness of 29. 5km in Guangdong Province and its adjacent areas ranges between 26. 8km and 33. 6km and gradually thins from northwest to southeast. The crustal thickness in the Zhujiang Delta, western Guangdong, Nanning and Nanao areas is relatively thinner and ranges between 25. 0km and 28. 0km. The minimum crustal thickness is about 26 km beneath Wengtian, Hainan and the Zhanjiang zone and Shangchuan Island in Guangdong. The crustal thickness in the zones of Mingxi,Fujian and Yongzhou, Hunan is thicker and varies between 31. 0km and 34. 0km. The distribution of Poissons ratio in our study region ranges between 0. 20 and 0. 29. Poissons ratios in Southeast Hainan,the coastal areas of East Guangdong and West Fujian and the South Jiangxi have distinctly higher values than in others. It suggests that the various geothermal fields located in these areas have high heat flow values. The distribution of crustal thickness and Poissons ratio has an obvious block feature and may be related to the distribution of faults and historical earthquakes. 相似文献
4.
Gao Guoying 《中国地震研究》2007,21(4):397-408
Jiashi and its surrounding areas are composed of many structural zones. Using the focal mechanism solutions of 59 moderately strong earthquakes in Jiashi and its surrounding areas, and combining these with the calculation results of system cluster and stress field inversion, we analyzed the evolvement characteristics of the stress field for different times and different regions. The results were as follows: The earthquakes in Jiashi are mainly strike-slip. However, those of the Kalpin block are mainly reverse events, showing an obvious thrusting. The regional characteristics are different from other areas. The direction of the regional principal stress field is near NS. However, under different tectonic backgrounds, the directions of the stress fields are different. The direction of the principal compress stress is near NS in the Kashi-Wuqia area. But before and after the 3 earthquakes with M7.0, dynamic evolution from NW to NS and then to NE with time process was observed. The Kalpin block has been dominated by a consistent stress field in the NW direction for a long time. However, the direction of the stress field of the Jiashi region is NE. Since 1996, the direction of the regional stress field has changed obviously. The direction of the P axis was deflected towards the NE, and the plunge angle increased. The result shows clearly the regional characteristics and variation of the distribution pattern of the stress field in different tectonic environments. 相似文献
5.
Recent tectonic stress field zoning in Sichuan-Yunnan region and its dynamic interest 总被引：7，自引：0，他引：7
In this paper, we have carefully determined the stress zones in the Sichuan-Yunnan region with reference to the in-situ stress data of hydraulic fracturing and the inverted fault slip data by using the step-by-step convergence method for stress zoning based on focal mechanism solutions. The results indicate that the tectonic stress field in the Sichuan-Yunnan region is divided into 3 stress zones by 2 approximately parallel NNW-trending stress transition belts. The area between the 2 belts is the Sichuan-Yunnan stress zone where the maximum principal stress σ1 is just in the NNW direction. The eastern boundary of Sichuan-Yunnan stress zone （the eastern stress transition belt） is basically consistent with the eastern boundary of Sichuan-Yunnan rhombic block. The western boundary of Sichuan-Yunnan stress zone （the western stress transition belt） is not totally consistent with the western boundary of Sichuan-Yunnan rhombic block. The northern segment of the western stress transition belt extends basically along the Jinshajiang fault and accords with the western boundary of Sichuan-Yunnan rhombic block, while its southern segment does not extend along the southwestern boundary of the rhombic block, i.e., Honghe fault and converge with the eastern stress transition belt, but stretches continuously in the NNW direction and accords with the Yingpanshan fault. We therefore consider that under the combined influence from the northward motion of India Plate, the southeastward shift of east Qinghai-Xizang Plateau and the strong obstruction of South China block, the tectonic stress field in the Sichuan-Yunnan region might not be totally controlled by the previous tectonic frame and new stress transition belt may have possibly formed. 相似文献
6.
A quantitative research for present-time crustal motion in Fujian Province, China and its marginal sea 总被引：2，自引：0，他引：2
Based on the Chinese mainland GPS network (1994～1996), Fujian GPS network (1995～1997), cross fault deformation network (1982～1998), precise leveling network (1973～1980) and focal mechanism solutions of the recent several tens years, we synthetically and quantitatively studied the present-time crustal motion of the southeast coast of Chinese mainland-Fujian and its marginal sea. We find that this area with its mainland together moves toward SE with a rather constant velocity of 11.2(3.0 mm/a. At the same time, there is a motion from the Quanzhou bay pointing to hinterland, with a major orientation of NW, extending toward two sides, and with an average velocity of 3.0(2.6 mm/a. The faults orienting NE show compressing motions, and the ones orienting NW show extending motions. The present-time strain field derived from crustal deformation is consistent with seismic stress field derived from the focal mechanism solutions and the tectonic stress field derived from geology data. The principal stress of compression orients NW (NWW) - SE (SEE). Demarcated by the NW orienting faults of the Quanzhou bay and Jinjiang-Yongan, the crustal motions show regional characteristics: the southwest of Fujian and the boundary of Fujian and Guangdong are areas of rising, the northeast of Fujian are areas of sinking. The horizontal strain rate and the fault motion of the former are both greater than the later. The side-transferring motion of Hymalaya collision zone and the compression of the west pacific subduction zone affect the motion of the research area. The amount of motion affected by the former is larger than the later, but the former is homogeneous and the later is not, which indicates that the events of strong earthquakes in this region relate more directly with western pacific subduction zone. 相似文献
7.
1,209 earthquakes occurred in Xianyou, Fujian from August 4, 2010 to October 4, 2013. The largest earthquake was ML5.0 on September 4, 2013. In order to study the Xianyou earthquake sequence and understand the causative structure and stress field of Xianyou, the focal mechanism solutions of six earthquakes （ ML 〉 3. 5 ） in the Xianyou earthquake sequence are calculated using the broadband digital data of the Fujian Seismic Network with the seismic moment tensor inverse method. The results show that the focal faults of the six earthquakes are similar, which are all strike-slip faults striking to the northwest with high dip angles. The direction of the principal compressive stress axes is near SN, which is different from the stress field of Fujian region. The Xianyou earthquake sequence may have been induced by the stress adjustment after the impoundment of Jinzhong reservoir. 相似文献
8.
Using the focal mechanism solutions of 24 moderately strong earthquakes in the northern Tianshan area, we carried out system cluster and stress field inversion analysis. The result indicates that, the focal mechanism solutions of moderately strong earthquakes are mainly dipslip reverse faulting in the northern Tianshan area. The principal rupture planes of earthquakes are NW-oriented. It is basically consistent with the strike of earthquake structure in its adjacent area. The direction of the principal compression stress P axis is nearly NS, and its inclination angle is small; while the inclination angle of the principal extensional stress T axis is large. It shows that the regional stress field is mainly controlled by the near-NS horizontal compressive stress. The direction of the maximum principal stress shows a gradation process of NNE-NS-NW from east to west. 相似文献
9.
SUN DongSheng LIN WeiRen CUI JunWen WANG HongCai CHEN QunCe MA YinSheng WANG LianJie 《中国科学:地球科学(英文版)》2014,57(6):1212-1220
In situ stress state becomes more and more significant with in-depth research on geodynamics and energy development.However,there has not been an economic and effective method developed to determine deep three-dimensional in situ stress.The Anelastic Strain Recovery(ASR)method is a newly developed technique that can determine three-dimensional in situ stresses.After the 12 May 2008 Ms8.0 Wenchuan earthquake,the ASR method was used for the first time in mainland China to measure the in situ stresses in the WFSD scientific boreholes in Sichuan Province,China.In this paper,the basic procedure of the ASR method is introduced in detail and the compliances of ASR for boring cores are investigated.The results show that the maximum principal stress direction was NW64°at a measured depth(MD)of 1173 m(vertical depth 1151 m)in WFSD-1.The ratio of shear mode to the volume mode compliance of ASR was 2.9.And the three principal stresses at 1173 m MD in WFSD-1are 43,28 and 25 MPa.Combined with stress measurement results determined using other in situ measurement methods along the Longmenshan fault zone,the directions of the maximum horizontal principal stress changes from E-W to NEE-SWW to NWW-SEE when moving from NE to SW along the Longmenshan fault zone.This change is in agreement with the stress regime of the Longmenshan fault zone of the Wenchuan Earthquake,which supports a stress regime consisting predominantly of thrusts in the southwest and strike-slip in the northeast. 相似文献
10.
The November 14, 2001 Ms8.1 Kunlun Mountains earthquake in northern Tibet is the largest earthquake occurring on the Chinese mainland since 1950. We apply a three-dimensional （3-D） finite element numerical procedure to model the coseismic displacement and stress fields of the earthquake based on field investigations. We then further investigate the stress interaction between the Ms8.1 earthquake and the intensive aftershocks. Our primary calculation shows that the coseismic displacement field is centralized around the east Kunlun fault zone. And the attenuation of coseismic displacements on the south side of Kunlun fault zone is larger than that on the north side. The calculated coseismic stress field also indicates that the calculated maximal shear stress field is centralized around the east Kunlun fault zone; the directions of the coseismic major principal stress are opposite to that of the background crustal stress field of the Qinghai-Xizang （Tibet） Plateau. It indicates that the earthquake relaxes the crustal stress state in the Qinghai-Xizang （Tibet） Plateau. Finally, we study the stress interaction between Ms8.1 earthquake and its intensive aftershocks. The calculated Coulomb stress changes of the Ms8.1 great earthquake are in favor of triggering 4 aftershocks. 相似文献
11.
12.
东南沿海地震区的现代构造应力场 总被引：11，自引：3，他引：11
根据断层面的最新错动方向，震源机制解和地壳形变等资料，研究了东南沿海地区的现代构造应力场，结果表明：本区构造应力场可大致划分为两个分区：长乐－诏安断裂带以东地区主压应力轴为近东西向；以西地区的主压应力轴近南北向。 相似文献
13.
Crustal movement and deformation in Taiwan and its coastal area 总被引：1，自引：0，他引：1
Introduction Both Taiwan Island and Chinese mainland belong to Eurasian plate in geological structure. And the nearest distance between Taiwan Island and Fujian Province, which is located on the opposite coast, is only 130 km. Although there are high-precision GPS networks in both Taiwan and Fujian Province, joint GPS measurement cannot be made directly because of the inconvenient contact due to the strait between them. However, the GPS networks arranged on b… 相似文献
14.
闽粤海外历史地震与台湾海峡现今强震活动图像 总被引：2，自引：1，他引：1
闽粤两省强烈地震多发生在沿海地区,且福建南日岛至广东南澳一线的泉州－汕头地震带地震活动尤为突出。历史上东南沿海地震带曾发生过４次７级以上大地震,而其中３次都发生在泉－汕段海域,继华南地区本世纪著名的１９１８年广东南澳７．３级地震后,１９９４年９月１６日台湾海峡南部又发生７．３级强震,这在经济发达,人口稠密的闽粤沿海地区引起了极大关注。本文通过历史强震活动资料,分析闽粤沿海与台湾海峡强震在时间进程, 相似文献
15.
利用有限元方法, 研究了台湾地震发生所产生的应力变化对华东南地区应力场调整的影响, 给出了这些地区地震发生后所产生的扰动应力场分布特征, 解释了台湾地震活动与大陆地震活动同步的问题。 研究结果认为, 台湾东部地震带地震发生所产生的应力扰动主要影响福建至广东和广西沿海地区的应力场; 如果地震发生在台湾东南角, 其扰动应力会影响到华东沿海地区; 台湾北部地震带地震发生所产生的扰动应力场除影响福建至广东沿海外, 还会影响到华东沿海地区。 相似文献
16.
采用震源位置及速度结果的联合反演方法确定闽粤赣交界区(24°~26.5°N,114°~117.8°E)地震的震源位置以及震源区速度结构。结果显示:1闽粤赣交界区地震震源平均深度随震级增大而加深的特征明显,即地震震级越大,震源深度越深,但平均深度不超过15 km;越靠近沿海,地震震源深度有加深的趋势。2通过对河源地区、邵武-河源断裂带中段(寻乌-瑞金)区域、政和-大浦断裂带中段(漳平附近)区域以及闽粤近海区域地震剖面研究,发现地震多发生于高低速异常结合部位。 相似文献
17.
福建及沿海地区地震活动力源探讨 总被引：6，自引：0，他引：6
综合地震震源机制解和地壳形变观测资料的研究, 求得福建及其沿海地区现代震源应力场, 认为这与台湾地区、 台湾海峡应力场相互衔接, 主压应力轴优势方位为NW-SE向, 力轴仰角较小, 应力场近于水平挤压, 形变场反映近期福建沿海亦受北西方向, 接近与海岸垂直的挤压力。 进一步分析该区域内的断裂构造特征和地震活动强度由东至西逐渐减弱的规律, 认为菲律宾海板块与欧亚板块的相互作用力不仅是台湾强震力源所在, 而且其影响向西扩展, 福建及其沿海地区地震活动主要力源仍然是来自这两大板块的相互作用力。 相似文献
18.
THE 3-D VELOCITY STRUCTURE OF CRUST AND UPPERMOST MANTLE AND ITS TECTONIC IMPLICATIONS IN FUJIAN PROVINCE 
下载免费PDF全文
下载免费PDF全文 It is important to detect the fine velocity structures of the crust and uppermost mantle to understand the regional tectonic evolution, earthquake generation processes, and to conduct earthquake risk assessment. The inversion of uppermost mantle velocity and Moho depth are strongly influenced by crustal velocity heterogeneity. In this study, we collected first arrivals of Pg and Pn and secondary arrivals of Pg wave from the seismograms recorded at Fujian provincial seismic network stations. New 3-D P-wave velocities were inverted by multi-phase joint inversion method in Fujian Province. Our results show that the fault zones in Fujian Province have various velocity patterns. The shallow crust is characterized by high velocity that represents mountains, while the mid-lower crust shows low velocities. The anomalous velocities are correlated closely with tectonic faults in Fujian Province. Velocity anomalies mainly show NE-trending distribution, especially in the mid-lower crust and uppermost mantle, which is consistent with the NE-trending of the regional main fault zones. Meanwhile, a part of velocity patterns show NW trending, which is related to the secondary NW-oriented faults. Such velocity distribution also shows a geological structural pattern of "zoning in east-west direction and blocking in north-south direction" in Fujian area.
In the crust, a low velocity zone is found along Zhenghe-Dapu fault zone as mentioned by previous study, however our result shows the low velocity exists at depth of 20~30km in mid-lower crust. Compared with previous study, this low velocity zone is larger and deeper both in range and depth.
The crustal thickness of 28~35km from our joint inversion is similar to the results from the receiver functions of previous studies. The thinnest crust(28km)is observed at offshore in the north of Quanzhou; while the thickest crust(35km)is located west of Zhangzhou near the Zhenghe-Dapu fault zone. Generally, thinner crustal thickness is found in offshore of Fujian Province, and thicker crustal thickness is in the mainland. However, we also found that crustal thickness becomes thinner along the east side of Yongan-Jinjiang Fault.
The values of Pn velocities in the region vary from 7.71 to 8.26km/s. The velocity distribution of the uppermost mantle presents a large inhomogeneity, which is correlated with the distribution of the fault zone. High Pn velocity anomalies are found mainly along the west side of the Zhenghe-Dapu fault zone(F2), and the east side of the Shaowu-Heyuan fault zone(F1), which is strip-shaped throughout the central part of Fujian. Low Pn velocity anomalies are observed along the coast and Taiwan Straits, including the Changle-Zhaoan fault zone, the coastal fault zone, and the Fuzhou Basin. We also found a low Pn velocity anomaly zone, which extends to the coast, in the Shaowu-Heyuan fault zone at the junction of the Fujian, Guangdong and Jiangxi Provinces. In the west of Taiwan Straits, both high and low Pn velocity anomalies are observed.
Our results show that the historical strong earthquakes(larger than magnitude 6.0) are mainly distributed between positive and negative anomaly zones at different depth profiles of the crust, and similar anomalies distribution also exists at the uppermost mantle, suggesting that the occurrence of strong earthquakes in the region is not only related to the anomalous crustal velocity structure, but also affected by the velocity anomaly structure from the uppermost mantle. 相似文献
19.
本文系统地汇集、修订了1933年至1969年台湾及其东部海域6级以上强震的震源机制资料,并重新测定了1970年至1978年台湾6级以上地震,福建省和台湾海峡部份地震以及1604年泉州海外8级强震的震源机制,分析了闽、台两省震源机制特征,指出:(1)由震源机制求出的断层面解与源深处的现代构造运动紧密相关;(2)大部份主压应力轴方向与主要断裂带垂直;(3)在台湾东部海中,中强地震组成三个互相平行的椭圆形空区,空区周围83%的6.0——6.9级地震的主 P 轴方向近似与空区边线垂直,7级以上强震都发生在空区边缘;(4)以巴士海峡为中心,面向福建大陆,应力场呈现向西北展开的扇形分布. 相似文献